johnl

Hi Pete forget that...if I could spell my own name it would help :-( All working now. Sorry to bother you. JL

Hi Pete turns out that hte problem was the disc was dying! So its not FSUIPc at all :-) Now my problem is, I am doing a reinstall, and I just downloaded V4.3 but does not recognise my V4 code that I bought....? It should, right? I bought a FSUIPC V4 registration from SimMarket and I tried cutting and pasting the code from there and it still says its invalid.... Help! thanks :-) JL

Hi All suddenly....for no obvious reason....despite having run previously just fine....FSX tells me "An add-on utility is causing a problem with FSX" or words to that effect. The utility it names is FSUIPC. (I have a registered version 4.20) From memory it said "Do you want to run this program?" and I said YES of course as it works fine. Except now it does not. I get the splash screen and then "Fatal Error".... ie I cannot start FSX! Any ideas??? John L

You know, that just *might* explain it :-) thanks!

Hi Peter! I have been a registered user of FSUIPC for some time. And thanks for your help with various questions! I am slowly making the swap to FSX and I just installed FSUPIPC (V4.09) but my old key does not work. I cut and pasted from the registration email I received years ago so it should be OK.... Any ideas? I have a registered version running FS9.1.... Thanks John L

So...if one hits E2 and does NOT move the lever then the fuel to engine 2 remains at zero? I can try this...but I think the authors of this plane wrote it so that *any* fuel injected into the engine prior to 12%N1 wouold cause the hot start fault. I even tried not switching to E2 until the 2nd engine reached 12%N1 but even that failed! I should try this! Good idea, butno it does not have a separate fuel valve :-/ Thanks for the help! JL PS Ilove the PMDG B1900 :-)

Hi this is a follow-up to my post about trying to change axis assignments with a button. Seems this is not possible. So I have another solution....which doesn't work, so I guess its *not* a solution...but if I knew *why* it did not work, I might be able to make progress.... Here is a post of mine from the Aeroworx KingAir page. To start this plane you must NOT introduce ANY fuel into the engine until 12%N1. I have a CH yoke and only one axis for the fuel condition levers. So I was using E1 and E2. That did notg work....see below. My question is: when you set, say, fuel at 0% on engines 1 and 2, hit E1 and adjust the fuel to E1....then hit E2 to change to engine 2...what is the fuel value in engine 2 *immediately* you hit E2? HOw is the transfer done? I tried two posisbilities in the post below 1) it *instantly* gives you the value on engine 1 2) it maintains the value it had until you move the axis Neither (!) seems to be the case! Does anyone know??? Help! :-) JL ------------------------- Hi All firstly, congrats to all involved with this wonderful plane! Its a gem. My only frustration has been trying to start the thing with he CH flight yoke. I finally found a solution in a post from Kurt Yoda: "Never try to use a single controller lever (such as the CH Yoke) for the fuel conditioners. Disable your condition lever, and start both engines with the mouse, then move the condition lever to mid-range before re-enabling it." Of course, this works fine! Thanks Kurt! But I was thinking....and experimenting.... In principle, of course, we can use E1, E2 and E12 to start the engines properly and if FS behaved we should be OK. I tried the following (as have others, as I see in the forum) E1 Start 1 At 12% Move cond lever to low idle This gives a fine start for engine 1 Now the question becomes - what does FS do when you hit E2? Does it instantly take the value of the cond lever for E2 to be that of E1? Or does it start at its current value (0%) and only change when you move the lever? If it was the latter then repeating the procedure above would work. But it does not so I concluded that as soon as I hit E2 FS was sending fuel to the engine even though it still reads CUTOFF. So I thought I had a solution!!! Proceed as before Fuel Cutoff (both!) E1 at 12% move to low idle Engine 1 is fine Now.....leave lever as is and START engine 2 When second engine gets to 12% hit E2 I thought this would introduce fuel to engine 2 at the correct time. But alas it hotstarts cry angry Any ideas why this fails? I am reasonably happy starting with the mouse but using the levers is nice. Its a pity you cannot use hotkeys in FSUIPC to adjust the axes....if you could then a key to make two levers the fuel cond levers for engines 1 and 2 would be ideal..then a key to take them back to their usual setting...and all would be fine. I think fate is trying to make me buy a throttle quadrant! But...does anyone know why my proposed solution did not work? Thanks! John L

Bud thanks..I tried that...to no avail :-( I hit E1 and start engine 1. Move the condition lever to 20% or so. All is fine and dandy at this stage.... Then I hit E2. Now....does FS take the value of the fuel lever on engine 2 to be zero (as it was before hitting E2) or the current value on the lever, which is now governing engine2)? I don't know...but I know that whatever it does, it introduces fuel into the engine, and that does damage... I even tried not switching from E1 to E2 until the starter had the appropriate value of N1 on the second engine...so that however FS worked, I should not be adding fuel to engine 2 until I hit E2. But that did not work either. Hence my thoughts about *temporarily* using two separate levers... The manufacturers at Aeroworx receommend NOT using the yoke at startup, and using the mouse to control the levers. Indeed, that works :-) But its nice to use the levers.... Sigh.... Thanks for your suggestion....but it doesn't work :-/ JL

Hi I am flying the lovely Aeroworx King Air, and I am using a CH flight yoke. The King Air is a twin engine aircraft and I use the three throttle levers for the usual throttle, pitch and fuel condition levelrs. The left and right engines are usually controlled simultaneously by the one lever, of course. In principle one can swap from controlling both engines to just engine 1 by using keyboard command "E 1"; to control only engine 2 we would use "E 2" and return to both using "E 1 2". (I know you know this...) The problem is that this aircraft will damage the engines during a start if you introduce fuel too early, and it appears not possible to use the E+1 and E+2 switching without causing serious problems to the engines during start. I can get arouns this y using the mouse to move the condition levers separately. But an *elegant* solution would be 1 Program a button to make the middle lever become condition lever for engine 1 and the rigt lever the cond lever for engine 2 2 NOw there are two fully independent axes and I can use them to start the engines realistically 3 Once started, program another button to return the middle lever 2 to be the pitch (for engines 1 & 2) and the right lever to be the cond lever (for engines 1 & 2) So....to all you FSUIPC experts.....is this possible????? Many thanks! John L

OK....I tracked the problem down to a faulty button in my flight yoke! It was sending a "trim up" command every second or so :-/ I turned off that button and all is fine. Except that now I don't have a trim button :-( Anyway....its fixed. Thought I would pass this one because I have asked many people over the last year if they kenw how this could happen....now we do :-) JL

Hi can anyone help me with this? For some time now I have noticed that, seemingly intermittently, my aircraft (all of them, as far as I can tell) sometimes adjust their trim by themselves. This is while on the ground....no autopilot... I am not touching the trim buttons...and I can watch the trim get further and further "nose up" ! It adjusts it every few seconds or so. Up a notch. Then a bit later, up another. If I have notnoticed this, it makes takeoff rather spectacular :-) But it is now causing me greast distress as when I try to fly the heavies, the autopilot disengages straight away as soon as the trim adjusts itself :-( Any ideas? Can FSUIPC help me???? thanks! Its driving me to distraciton!!! John L

Pete what a champ you are! Yes, selecting "reverser for jets only" fixed the mixture problem. I gather this is a new option? I have been running a (registered, I am proud to say) copy of fsuipc for ages, but recently had to upgrade for an add-on. I gather that the problem began then? Many many thanks! John L

Pete many thanks for your help and your time (and for a great product!) But I still have troubles. I checked the mixture axis in fsuipc and its not mapped to anything, no filters, and I hit reset. I get no values in the IN and OUT box at all, although I do for the other axes. I will upload my fsuipc.ini for you to look at. I alsoc checked the four separate, mixtures...no input to those either. I turned on logging and ran each of mixture, prop and throttle up and down twice. I see no entry for mixture... Indeed, if I remove the section [joystick calibration] from the .ini file then it all works. Any ideas??? I would rather use fsuipc and its features than disable the joystick part... John L FSUIPC.ini [General] History=UOV41NCK5FVE9LOGR3UEG TCASid=Flight TCASrange=40 TrafficScanPerFrame=10 AxisCalibration=No CentredDialogue=No ClearWeatherDynamics=Yes OwnWeatherChanges=No WeatherReadInterval=4 MoveBGLvariables=Yes MainMenu=&Modules SubMenu=&FSUIPC ... WindSmoothing=No WhiteMessages=No ThrottleSyncAll=No GenerateCirrus=No WindShearSharp=No UpperWindGusts=Yes ExtendMetarMaxVis=Yes PatchSimApAlt=No AutoClearWeather=Yes ExtendTopWind=No WindSmoothness=5 SmoothPressure=No PressureSmoothness=5 SmoothVisibility=No VisibilitySmoothness=2 MaxSurfaceWind=0 WindLimitLevel=200 WindDiscardLevel=400 WindAjustAltitude=No WindAjustAltitudeBy=2000 MinimumVisibility=0 MaximumVisibilityFewClouds=0 MaximumVisibility=0 MaximumVisibilityOvercast=0 MaximumVisibilityRainy=0 OneCloudLayer=No ThinClouds=No ThinThunderClouds=No CloudThinness=1000 ThunderCloudThinness=10000 CloudTurbulence=Yes CloudIcing=No WindTurbulence=Yes SuppressAllGusts=No ExternalOptionControl=Yes AutoTuneADF=No KeepFS98CloudCover=No ShowPMcontrols=No MagicBattery=No RudderSpikeRemoval=No ElevatorSpikeRemoval=No AileronSpikeRemoval=No ReversedElevatorTrim=No TrapUserInterrupt=Yes NavFreq50KHz=No ClockSync=No SmoothIAS=Yes SetVisUpperAlt=No VisUpperAltLimit=6000 MaxIce=-4 SuppressCloudTurbulence=No SuppressWindTurbulence=No SpoilerIncrement=512 FixWindows=No FixControlAccel=Yes DisconnTrimForAP=No WindSmoothingDelay=0 WindSmoothAirborneOnly=No VisSmoothingDelay=0 VisSmoothAirborneOnly=No ShortAircraftNameOk=No ZeroElevForAPAlt=No TimeForSelect=4 AutoTaxiWind=No GraduatedVisibility=No LowerVisAltitude=0 UpperVisAltitude=25000 UpperVisibility=6000 [JoystickCalibration] FlapsSetControl=0 ReverserControl=66292 MaxThrottleForReverser=0 AileronTrimControl=0 RudderTrimControl=0 CowlFlaps1Control=0 CowlFlaps2Control=0 CowlFlaps3Control=0 CowlFlaps4Control=0 SlopeAileron=0 SlopeElevator=0 SlopeRudder=0 Aileron=-16380,-512,-217,10000 Elevator=-16380,512,3897,16380 Rudder=-16380,0,512,16380 Throttle=-16380,16380 LeftBrake=-16380,16380 RightBrake=-16380,16380 Throttle1=-16380,-512,512,16380 Throttle2=-16380,-512,512,16380 Throttle3=-16380,-512,512,16380 Throttle4=-16380,-512,512,16380 PropPitch1=0,0,512,16380 PropPitch2=0,0,512,16380 ElevatorTrim=-16380,-512,512,16380 Spoilers=-16380,16380 Flaps=0,16380 Reverser=-16380,16380 Aileron Trim=-16380,-512,512,16380 Rudder Trim=-16380,-512,512,16380 CowlFlaps1=0,16380 CowlFlaps3=0,16380 LOG ********* FSUIPC, Version 3.45 by Pete Dowson ********* Running inside FS2004(original release) User Name="John Lattanzio" User Addr="john.lattanzio@sci.monash.edu.au" FSUIPC Key is provided WIDEFS not user registered, or expired [Continuation log requested by user] Module base=61000000 ClassOptions: UIPCMAIN=FF7F, FS98MAIN=FF7F, FS2KMAIN=FF5E WeatherOptions(Orig)=4014B627[4014B627] InitDelay: 0 seconds WeatherReadInterval=4 LogOptions=00000001 131391 System time = 12:43:41, FS2004 time = 10:15:19 (17:15Z) 131391 WeatherOptions set, now 4014B627 (timer=0) 132063 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1452 (0xfffffa54) AXIS_ELEVATOR_SET 132109 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1442 (0xfffffa5e) AXIS_ELEVATOR_SET 132172 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1434 (0xfffffa66) AXIS_ELEVATOR_SET 132219 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1428 (0xfffffa6c) AXIS_ELEVATOR_SET 132266 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1424 (0xfffffa70) AXIS_ELEVATOR_SET 132328 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1421 (0xfffffa73) AXIS_ELEVATOR_SET 132375 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1419 (0xfffffa75) AXIS_ELEVATOR_SET 132438 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1417 (0xfffffa77) AXIS_ELEVATOR_SET 132484 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1416 (0xfffffa78) AXIS_ELEVATOR_SET 132547 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1415 (0xfffffa79) AXIS_ELEVATOR_SET 132594 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1414 (0xfffffa7a) AXIS_ELEVATOR_SET 132641 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1413 (0xfffffa7b) AXIS_ELEVATOR_SET 133016 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1452 (0xfffffa54) AXIS_ELEVATOR_SET 133063 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1441 (0xfffffa5f) AXIS_ELEVATOR_SET 133109 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1433 (0xfffffa67) AXIS_ELEVATOR_SET 133172 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1427 (0xfffffa6d) AXIS_ELEVATOR_SET 133219 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1423 (0xfffffa71) AXIS_ELEVATOR_SET 133266 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1420 (0xfffffa74) AXIS_ELEVATOR_SET 133328 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1419 (0xfffffa75) AXIS_ELEVATOR_SET 133375 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1417 (0xfffffa77) AXIS_ELEVATOR_SET 133422 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1416 (0xfffffa78) AXIS_ELEVATOR_SET 133484 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1415 (0xfffffa79) AXIS_ELEVATOR_SET 133531 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1414 (0xfffffa7a) AXIS_ELEVATOR_SET 133594 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1453 (0xfffffa53) AXIS_ELEVATOR_SET 133641 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1443 (0xfffffa5d) AXIS_ELEVATOR_SET 133688 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1435 (0xfffffa65) AXIS_ELEVATOR_SET 133750 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1429 (0xfffffa6b) AXIS_ELEVATOR_SET 133797 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1424 (0xfffffa70) AXIS_ELEVATOR_SET 133844 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1421 (0xfffffa73) AXIS_ELEVATOR_SET 133906 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1419 (0xfffffa75) AXIS_ELEVATOR_SET 133953 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1417 (0xfffffa77) AXIS_ELEVATOR_SET 134000 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1416 (0xfffffa78) AXIS_ELEVATOR_SET 134063 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1415 (0xfffffa79) AXIS_ELEVATOR_SET 134109 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1414 (0xfffffa7a) AXIS_ELEVATOR_SET 134156 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1413 (0xfffffa7b) AXIS_ELEVATOR_SET 134703 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1452 (0xfffffa54) AXIS_ELEVATOR_SET 134750 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1441 (0xfffffa5f) AXIS_ELEVATOR_SET 134797 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1433 (0xfffffa67) AXIS_ELEVATOR_SET 134859 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1427 (0xfffffa6d) AXIS_ELEVATOR_SET 134906 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1423 (0xfffffa71) AXIS_ELEVATOR_SET 134953 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1420 (0xfffffa74) AXIS_ELEVATOR_SET 135016 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1457 (0xfffffa4f) AXIS_ELEVATOR_SET 135063 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1446 (0xfffffa5a) AXIS_ELEVATOR_SET 135109 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1437 (0xfffffa63) AXIS_ELEVATOR_SET 135172 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1470 (0xfffffa42) AXIS_ELEVATOR_SET 135219 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1494 (0xfffffa2a) AXIS_ELEVATOR_SET 135266 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1473 (0xfffffa3f) AXIS_ELEVATOR_SET 135328 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1457 (0xfffffa4f) AXIS_ELEVATOR_SET 135375 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1446 (0xfffffa5a) AXIS_ELEVATOR_SET 135422 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1477 (0xfffffa3b) AXIS_ELEVATOR_SET 135484 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1460 (0xfffffa4c) AXIS_ELEVATOR_SET 135531 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1448 (0xfffffa58) AXIS_ELEVATOR_SET 135594 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1438 (0xfffffa62) AXIS_ELEVATOR_SET 135641 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1431 (0xfffffa69) AXIS_ELEVATOR_SET 135688 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1426 (0xfffffa6e) AXIS_ELEVATOR_SET 135750 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1422 (0xfffffa72) AXIS_ELEVATOR_SET 135797 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1420 (0xfffffa74) AXIS_ELEVATOR_SET 135844 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1418 (0xfffffa76) AXIS_ELEVATOR_SET 135906 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1416 (0xfffffa78) AXIS_ELEVATOR_SET 135953 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1415 (0xfffffa79) AXIS_ELEVATOR_SET 136000 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1453 (0xfffffa53) AXIS_ELEVATOR_SET 136063 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1443 (0xfffffa5d) AXIS_ELEVATOR_SET 136109 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1435 (0xfffffa65) AXIS_ELEVATOR_SET 136156 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1429 (0xfffffa6b) AXIS_ELEVATOR_SET 136219 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1424 (0xfffffa70) AXIS_ELEVATOR_SET 136266 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1421 (0xfffffa73) AXIS_ELEVATOR_SET 136328 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1419 (0xfffffa75) AXIS_ELEVATOR_SET 136375 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1417 (0xfffffa77) AXIS_ELEVATOR_SET 136422 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1416 (0xfffffa78) AXIS_ELEVATOR_SET 136484 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1415 (0xfffffa79) AXIS_ELEVATOR_SET 136531 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1414 (0xfffffa7a) AXIS_ELEVATOR_SET 136594 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1413 (0xfffffa7b) AXIS_ELEVATOR_SET 137531 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1452 (0xfffffa54) AXIS_ELEVATOR_SET 137578 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1442 (0xfffffa5e) AXIS_ELEVATOR_SET 137641 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1434 (0xfffffa66) AXIS_ELEVATOR_SET 137688 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1428 (0xfffffa6c) AXIS_ELEVATOR_SET 137734 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1424 (0xfffffa70) AXIS_ELEVATOR_SET 137797 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1421 (0xfffffa73) AXIS_ELEVATOR_SET 137844 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1419 (0xfffffa75) AXIS_ELEVATOR_SET 137891 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1417 (0xfffffa77) AXIS_ELEVATOR_SET 137953 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1416 (0xfffffa78) AXIS_ELEVATOR_SET 138000 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1415 (0xfffffa79) AXIS_ELEVATOR_SET 138063 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1414 (0xfffffa7a) AXIS_ELEVATOR_SET 138125 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1413 (0xfffffa7b) AXIS_ELEVATOR_SET 138906 *** AXIS: Cntrl= 66291 (0x000102f3), Param= -13505 (0xffffcb3f) AXIS_PROPELLER_SET 138953 *** AXIS: Cntrl= 66291 (0x000102f3), Param= -9025 (0xffffdcbf) AXIS_PROPELLER_SET 139016 *** AXIS: Cntrl= 66291 (0x000102f3), Param= -4801 (0xffffed3f) AXIS_PROPELLER_SET 139063 *** AXIS: Cntrl= 66291 (0x000102f3), Param= 0 (0x00000000) AXIS_PROPELLER_SET 139109 *** AXIS: Cntrl= 66291 (0x000102f3), Param= 3776 (0x00000ec0) AXIS_PROPELLER_SET 139172 *** AXIS: Cntrl= 66291 (0x000102f3), Param= 7488 (0x00001d40) AXIS_PROPELLER_SET 139219 *** AXIS: Cntrl= 66291 (0x000102f3), Param= 11072 (0x00002b40) AXIS_PROPELLER_SET 139266 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1452 (0xfffffa54) AXIS_ELEVATOR_SET 139266 *** AXIS: Cntrl= 66291 (0x000102f3), Param= 14912 (0x00003a40) AXIS_PROPELLER_SET 139328 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1441 (0xfffffa5f) AXIS_ELEVATOR_SET 139328 *** AXIS: Cntrl= 66291 (0x000102f3), Param= 16192 (0x00003f40) AXIS_PROPELLER_SET 139375 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1433 (0xfffffa67) AXIS_ELEVATOR_SET 139438 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1427 (0xfffffa6d) AXIS_ELEVATOR_SET 139484 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1423 (0xfffffa71) AXIS_ELEVATOR_SET 139531 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1420 (0xfffffa74) AXIS_ELEVATOR_SET 139594 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1419 (0xfffffa75) AXIS_ELEVATOR_SET 139641 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1417 (0xfffffa77) AXIS_ELEVATOR_SET 139703 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1416 (0xfffffa78) AXIS_ELEVATOR_SET 139750 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1415 (0xfffffa79) AXIS_ELEVATOR_SET 139797 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1452 (0xfffffa54) AXIS_ELEVATOR_SET 139844 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1442 (0xfffffa5e) AXIS_ELEVATOR_SET 139906 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1434 (0xfffffa66) AXIS_ELEVATOR_SET 139953 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1428 (0xfffffa6c) AXIS_ELEVATOR_SET 140016 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1424 (0xfffffa70) AXIS_ELEVATOR_SET 140063 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1421 (0xfffffa73) AXIS_ELEVATOR_SET 140109 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1458 (0xfffffa4e) AXIS_ELEVATOR_SET 140109 *** AXIS: Cntrl= 66291 (0x000102f3), Param= 14016 (0x000036c0) AXIS_PROPELLER_SET 140172 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1447 (0xfffffa59) AXIS_ELEVATOR_SET 140172 *** AXIS: Cntrl= 66291 (0x000102f3), Param= 10816 (0x00002a40) AXIS_PROPELLER_SET 140219 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1438 (0xfffffa62) AXIS_ELEVATOR_SET 140219 *** AXIS: Cntrl= 66291 (0x000102f3), Param= 8128 (0x00001fc0) AXIS_PROPELLER_SET 140266 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1431 (0xfffffa69) AXIS_ELEVATOR_SET 140266 *** AXIS: Cntrl= 66291 (0x000102f3), Param= 5568 (0x000015c0) AXIS_PROPELLER_SET 140328 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1426 (0xfffffa6e) AXIS_ELEVATOR_SET 140328 *** AXIS: Cntrl= 66291 (0x000102f3), Param= 3008 (0x00000bc0) AXIS_PROPELLER_SET 140375 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1422 (0xfffffa72) AXIS_ELEVATOR_SET 140375 *** AXIS: Cntrl= 66291 (0x000102f3), Param= 192 (0x000000c0) AXIS_PROPELLER_SET 140422 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1420 (0xfffffa74) AXIS_ELEVATOR_SET 140422 *** AXIS: Cntrl= 66291 (0x000102f3), Param= -1985 (0xfffff83f) AXIS_PROPELLER_SET 140484 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1418 (0xfffffa76) AXIS_ELEVATOR_SET 140484 *** AXIS: Cntrl= 66291 (0x000102f3), Param= -3777 (0xfffff13f) AXIS_PROPELLER_SET 140531 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1416 (0xfffffa78) AXIS_ELEVATOR_SET 140531 *** AXIS: Cntrl= 66291 (0x000102f3), Param= -5825 (0xffffe93f) AXIS_PROPELLER_SET 140594 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1415 (0xfffffa79) AXIS_ELEVATOR_SET 140594 *** AXIS: Cntrl= 66291 (0x000102f3), Param= -8257 (0xffffdfbf) AXIS_PROPELLER_SET 140641 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1414 (0xfffffa7a) AXIS_ELEVATOR_SET 140641 *** AXIS: Cntrl= 66291 (0x000102f3), Param= -11201 (0xffffd43f) AXIS_PROPELLER_SET 140688 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1413 (0xfffffa7b) AXIS_ELEVATOR_SET 140688 *** AXIS: Cntrl= 66291 (0x000102f3), Param= -13505 (0xffffcb3f) AXIS_PROPELLER_SET 140750 *** AXIS: Cntrl= 66291 (0x000102f3), Param= -15041 (0xffffc53f) AXIS_PROPELLER_SET 140797 *** AXIS: Cntrl= 66291 (0x000102f3), Param= -16193 (0xffffc0bf) AXIS_PROPELLER_SET 141109 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1452 (0xfffffa54) AXIS_ELEVATOR_SET 141156 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1442 (0xfffffa5e) AXIS_ELEVATOR_SET 141219 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1474 (0xfffffa3e) AXIS_ELEVATOR_SET 141266 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1458 (0xfffffa4e) AXIS_ELEVATOR_SET 141328 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1447 (0xfffffa59) AXIS_ELEVATOR_SET 141375 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1437 (0xfffffa63) AXIS_ELEVATOR_SET 141422 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1430 (0xfffffa6a) AXIS_ELEVATOR_SET 141484 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1425 (0xfffffa6f) AXIS_ELEVATOR_SET 141531 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1421 (0xfffffa73) AXIS_ELEVATOR_SET 141594 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1419 (0xfffffa75) AXIS_ELEVATOR_SET 141594 *** AXIS: Cntrl= 65765 (0x000100e5), Param= -15045 (0xffffc53b) AXIS_THROTTLE_SET 141641 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1417 (0xfffffa77) AXIS_ELEVATOR_SET 141641 *** AXIS: Cntrl= 65765 (0x000100e5), Param= -11076 (0xffffd4bc) AXIS_THROTTLE_SET 141688 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1416 (0xfffffa78) AXIS_ELEVATOR_SET 141688 *** AXIS: Cntrl= 65765 (0x000100e5), Param= -8388 (0xffffdf3c) AXIS_THROTTLE_SET 141750 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1415 (0xfffffa79) AXIS_ELEVATOR_SET 141750 *** AXIS: Cntrl= 65765 (0x000100e5), Param= -5187 (0xffffebbd) AXIS_THROTTLE_SET 141797 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1414 (0xfffffa7a) AXIS_ELEVATOR_SET 141797 *** AXIS: Cntrl= 65765 (0x000100e5), Param= -2370 (0xfffff6be) AXIS_THROTTLE_SET 141844 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1413 (0xfffffa7b) AXIS_ELEVATOR_SET 141844 *** AXIS: Cntrl= 65765 (0x000100e5), Param= 320 (0x00000140) AXIS_THROTTLE_SET 141906 *** AXIS: Cntrl= 65765 (0x000100e5), Param= 2496 (0x000009c0) AXIS_THROTTLE_SET 141953 *** AXIS: Cntrl= 65765 (0x000100e5), Param= 3904 (0x00000f40) AXIS_THROTTLE_SET 142000 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1452 (0xfffffa54) AXIS_ELEVATOR_SET 142000 *** AXIS: Cntrl= 65765 (0x000100e5), Param= 5953 (0x00001741) AXIS_THROTTLE_SET 142063 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1441 (0xfffffa5f) AXIS_ELEVATOR_SET 142063 *** AXIS: Cntrl= 65765 (0x000100e5), Param= 7489 (0x00001d41) AXIS_THROTTLE_SET 142109 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1433 (0xfffffa67) AXIS_ELEVATOR_SET 142109 *** AXIS: Cntrl= 65765 (0x000100e5), Param= 9282 (0x00002442) AXIS_THROTTLE_SET 142156 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1427 (0xfffffa6d) AXIS_ELEVATOR_SET 142156 *** AXIS: Cntrl= 65765 (0x000100e5), Param= 10690 (0x000029c2) AXIS_THROTTLE_SET 142219 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1423 (0xfffffa71) AXIS_ELEVATOR_SET 142219 *** AXIS: Cntrl= 65765 (0x000100e5), Param= 12098 (0x00002f42) AXIS_THROTTLE_SET 142266 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1420 (0xfffffa74) AXIS_ELEVATOR_SET 142266 *** AXIS: Cntrl= 65765 (0x000100e5), Param= 13251 (0x000033c3) AXIS_THROTTLE_SET 142328 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1419 (0xfffffa75) AXIS_ELEVATOR_SET 142328 *** AXIS: Cntrl= 65765 (0x000100e5), Param= 14787 (0x000039c3) AXIS_THROTTLE_SET 142375 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1417 (0xfffffa77) AXIS_ELEVATOR_SET 142375 *** AXIS: Cntrl= 65765 (0x000100e5), Param= 16195 (0x00003f43) AXIS_THROTTLE_SET 142438 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1416 (0xfffffa78) AXIS_ELEVATOR_SET 142484 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1415 (0xfffffa79) AXIS_ELEVATOR_SET 142547 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1414 (0xfffffa7a) AXIS_ELEVATOR_SET 142594 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1413 (0xfffffa7b) AXIS_ELEVATOR_SET 143234 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1452 (0xfffffa54) AXIS_ELEVATOR_SET 143297 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1442 (0xfffffa5e) AXIS_ELEVATOR_SET 143344 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1475 (0xfffffa3d) AXIS_ELEVATOR_SET 143344 *** AXIS: Cntrl= 65765 (0x000100e5), Param= 16067 (0x00003ec3) AXIS_THROTTLE_SET 143391 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1458 (0xfffffa4e) AXIS_ELEVATOR_SET 143391 *** AXIS: Cntrl= 65765 (0x000100e5), Param= 14659 (0x00003943) AXIS_THROTTLE_SET 143453 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1446 (0xfffffa5a) AXIS_ELEVATOR_SET 143453 *** AXIS: Cntrl= 65765 (0x000100e5), Param= 12995 (0x000032c3) AXIS_THROTTLE_SET 143500 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1437 (0xfffffa63) AXIS_ELEVATOR_SET 143500 *** AXIS: Cntrl= 65765 (0x000100e5), Param= 10306 (0x00002842) AXIS_THROTTLE_SET 143563 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1473 (0xfffffa3f) AXIS_ELEVATOR_SET 143563 *** AXIS: Cntrl= 65765 (0x000100e5), Param= 6593 (0x000019c1) AXIS_THROTTLE_SET 143609 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1457 (0xfffffa4f) AXIS_ELEVATOR_SET 143609 *** AXIS: Cntrl= 65765 (0x000100e5), Param= 2496 (0x000009c0) AXIS_THROTTLE_SET 143672 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1446 (0xfffffa5a) AXIS_ELEVATOR_SET 143672 *** AXIS: Cntrl= 65765 (0x000100e5), Param= 0 (0x00000000) AXIS_THROTTLE_SET 143719 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1437 (0xfffffa63) AXIS_ELEVATOR_SET 143719 *** AXIS: Cntrl= 65765 (0x000100e5), Param= -3010 (0xfffff43e) AXIS_THROTTLE_SET 143766 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1430 (0xfffffa6a) AXIS_ELEVATOR_SET 143766 *** AXIS: Cntrl= 65765 (0x000100e5), Param= -6211 (0xffffe7bd) AXIS_THROTTLE_SET 143828 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1425 (0xfffffa6f) AXIS_ELEVATOR_SET 143828 *** AXIS: Cntrl= 65765 (0x000100e5), Param= -9028 (0xffffdcbc) AXIS_THROTTLE_SET 143875 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1421 (0xfffffa73) AXIS_ELEVATOR_SET 143875 *** AXIS: Cntrl= 65765 (0x000100e5), Param= -12228 (0xffffd03c) AXIS_THROTTLE_SET 143938 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1419 (0xfffffa75) AXIS_ELEVATOR_SET 143938 *** AXIS: Cntrl= 65765 (0x000100e5), Param= -14789 (0xffffc63b) AXIS_THROTTLE_SET 143984 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1417 (0xfffffa77) AXIS_ELEVATOR_SET 143984 *** AXIS: Cntrl= 65765 (0x000100e5), Param= -16197 (0xffffc0bb) AXIS_THROTTLE_SET 144031 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1416 (0xfffffa78) AXIS_ELEVATOR_SET 144094 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1415 (0xfffffa79) AXIS_ELEVATOR_SET 144141 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1453 (0xfffffa53) AXIS_ELEVATOR_SET 144203 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1443 (0xfffffa5d) AXIS_ELEVATOR_SET 144250 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1435 (0xfffffa65) AXIS_ELEVATOR_SET 144297 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1429 (0xfffffa6b) AXIS_ELEVATOR_SET 144359 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1424 (0xfffffa70) AXIS_ELEVATOR_SET 144406 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1420 (0xfffffa74) AXIS_ELEVATOR_SET 144469 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1458 (0xfffffa4e) AXIS_ELEVATOR_SET 144516 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1487 (0xfffffa31) AXIS_ELEVATOR_SET 144578 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1467 (0xfffffa45) AXIS_ELEVATOR_SET 144625 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1453 (0xfffffa53) AXIS_ELEVATOR_SET 144672 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1443 (0xfffffa5d) AXIS_ELEVATOR_SET 144734 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1435 (0xfffffa65) AXIS_ELEVATOR_SET 144781 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1429 (0xfffffa6b) AXIS_ELEVATOR_SET 144844 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1424 (0xfffffa70) AXIS_ELEVATOR_SET 144891 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1421 (0xfffffa73) AXIS_ELEVATOR_SET 144938 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1419 (0xfffffa75) AXIS_ELEVATOR_SET 145000 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1417 (0xfffffa77) AXIS_ELEVATOR_SET 145047 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1416 (0xfffffa78) AXIS_ELEVATOR_SET 145094 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1415 (0xfffffa79) AXIS_ELEVATOR_SET 145156 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1414 (0xfffffa7a) AXIS_ELEVATOR_SET 145203 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1413 (0xfffffa7b) AXIS_ELEVATOR_SET 148422 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1452 (0xfffffa54) AXIS_ELEVATOR_SET 148469 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1441 (0xfffffa5f) AXIS_ELEVATOR_SET 148531 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1433 (0xfffffa67) AXIS_ELEVATOR_SET 148578 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1427 (0xfffffa6d) AXIS_ELEVATOR_SET 148625 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1423 (0xfffffa71) AXIS_ELEVATOR_SET 148688 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1420 (0xfffffa74) AXIS_ELEVATOR_SET 148734 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1419 (0xfffffa75) AXIS_ELEVATOR_SET 148734 *** AXIS: Cntrl= 66291 (0x000102f3), Param= -15041 (0xffffc53f) AXIS_PROPELLER_SET 148781 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1417 (0xfffffa77) AXIS_ELEVATOR_SET 148781 *** AXIS: Cntrl= 66291 (0x000102f3), Param= -10817 (0xffffd5bf) AXIS_PROPELLER_SET 148844 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1416 (0xfffffa78) AXIS_ELEVATOR_SET 148844 *** AXIS: Cntrl= 66291 (0x000102f3), Param= -6209 (0xffffe7bf) AXIS_PROPELLER_SET 148891 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1415 (0xfffffa79) AXIS_ELEVATOR_SET 148891 *** AXIS: Cntrl= 66291 (0x000102f3), Param= -705 (0xfffffd3f) AXIS_PROPELLER_SET 148953 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1414 (0xfffffa7a) AXIS_ELEVATOR_SET 148953 *** AXIS: Cntrl= 66291 (0x000102f3), Param= 5056 (0x000013c0) AXIS_PROPELLER_SET 149000 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1413 (0xfffffa7b) AXIS_ELEVATOR_SET 149000 *** AXIS: Cntrl= 66291 (0x000102f3), Param= 8768 (0x00002240) AXIS_PROPELLER_SET 149047 *** AXIS: Cntrl= 66291 (0x000102f3), Param= 13504 (0x000034c0) AXIS_PROPELLER_SET 149109 *** AXIS: Cntrl= 66291 (0x000102f3), Param= 16192 (0x00003f40) AXIS_PROPELLER_SET 149203 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1452 (0xfffffa54) AXIS_ELEVATOR_SET 149266 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1442 (0xfffffa5e) AXIS_ELEVATOR_SET 149313 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1434 (0xfffffa66) AXIS_ELEVATOR_SET 149359 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1428 (0xfffffa6c) AXIS_ELEVATOR_SET 149422 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1424 (0xfffffa70) AXIS_ELEVATOR_SET 149469 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1420 (0xfffffa74) AXIS_ELEVATOR_SET 149531 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1419 (0xfffffa75) AXIS_ELEVATOR_SET 149578 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1417 (0xfffffa77) AXIS_ELEVATOR_SET 149641 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1416 (0xfffffa78) AXIS_ELEVATOR_SET 149688 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1415 (0xfffffa79) AXIS_ELEVATOR_SET 149688 *** AXIS: Cntrl= 66291 (0x000102f3), Param= 15936 (0x00003e40) AXIS_PROPELLER_SET 149734 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1414 (0xfffffa7a) AXIS_ELEVATOR_SET 149734 *** AXIS: Cntrl= 66291 (0x000102f3), Param= 12992 (0x000032c0) AXIS_PROPELLER_SET 149797 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1413 (0xfffffa7b) AXIS_ELEVATOR_SET 149797 *** AXIS: Cntrl= 66291 (0x000102f3), Param= 9536 (0x00002540) AXIS_PROPELLER_SET 149844 *** AXIS: Cntrl= 66291 (0x000102f3), Param= 6848 (0x00001ac0) AXIS_PROPELLER_SET 149891 *** AXIS: Cntrl= 66291 (0x000102f3), Param= 3392 (0x00000d40) AXIS_PROPELLER_SET 149953 *** AXIS: Cntrl= 66291 (0x000102f3), Param= 192 (0x000000c0) AXIS_PROPELLER_SET 150000 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1452 (0xfffffa54) AXIS_ELEVATOR_SET 150000 *** AXIS: Cntrl= 66291 (0x000102f3), Param= -3393 (0xfffff2bf) AXIS_PROPELLER_SET 150047 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1441 (0xfffffa5f) AXIS_ELEVATOR_SET 150047 *** AXIS: Cntrl= 66291 (0x000102f3), Param= -6977 (0xffffe4bf) AXIS_PROPELLER_SET 150109 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1433 (0xfffffa67) AXIS_ELEVATOR_SET 150109 *** AXIS: Cntrl= 66291 (0x000102f3), Param= -10177 (0xffffd83f) AXIS_PROPELLER_SET 150156 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1467 (0xfffffa45) AXIS_ELEVATOR_SET 150156 *** AXIS: Cntrl= 66291 (0x000102f3), Param= -13377 (0xffffcbbf) AXIS_PROPELLER_SET 150203 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1492 (0xfffffa2c) AXIS_ELEVATOR_SET 150203 *** AXIS: Cntrl= 66291 (0x000102f3), Param= -16193 (0xffffc0bf) AXIS_PROPELLER_SET 150266 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1472 (0xfffffa40) AXIS_ELEVATOR_SET 150313 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1456 (0xfffffa50) AXIS_ELEVATOR_SET 150359 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1445 (0xfffffa5b) AXIS_ELEVATOR_SET 150422 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1436 (0xfffffa64) AXIS_ELEVATOR_SET 150469 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1429 (0xfffffa6b) AXIS_ELEVATOR_SET 150531 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1424 (0xfffffa70) AXIS_ELEVATOR_SET 150578 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1421 (0xfffffa73) AXIS_ELEVATOR_SET 150625 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1419 (0xfffffa75) AXIS_ELEVATOR_SET 150688 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1417 (0xfffffa77) AXIS_ELEVATOR_SET 150734 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1416 (0xfffffa78) AXIS_ELEVATOR_SET 150781 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1415 (0xfffffa79) AXIS_ELEVATOR_SET 150844 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1414 (0xfffffa7a) AXIS_ELEVATOR_SET 150891 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1413 (0xfffffa7b) AXIS_ELEVATOR_SET 150953 *** AXIS: Cntrl= 65765 (0x000100e5), Param= -15429 (0xffffc3bb) AXIS_THROTTLE_SET 151000 *** AXIS: Cntrl= 65765 (0x000100e5), Param= -12485 (0xffffcf3b) AXIS_THROTTLE_SET 151047 *** AXIS: Cntrl= 65765 (0x000100e5), Param= -8260 (0xffffdfbc) AXIS_THROTTLE_SET 151109 *** AXIS: Cntrl= 65765 (0x000100e5), Param= -5059 (0xffffec3d) AXIS_THROTTLE_SET 151156 *** AXIS: Cntrl= 65765 (0x000100e5), Param= -1218 (0xfffffb3e) AXIS_THROTTLE_SET 151203 *** AXIS: Cntrl= 65765 (0x000100e5), Param= 1472 (0x000005c0) AXIS_THROTTLE_SET 151266 *** AXIS: Cntrl= 65765 (0x000100e5), Param= 3648 (0x00000e40) AXIS_THROTTLE_SET 151313 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1452 (0xfffffa54) AXIS_ELEVATOR_SET 151313 *** AXIS: Cntrl= 65765 (0x000100e5), Param= 6593 (0x000019c1) AXIS_THROTTLE_SET 151375 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1442 (0xfffffa5e) AXIS_ELEVATOR_SET 151375 *** AXIS: Cntrl= 65765 (0x000100e5), Param= 9538 (0x00002542) AXIS_THROTTLE_SET 151422 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1434 (0xfffffa66) AXIS_ELEVATOR_SET 151422 *** AXIS: Cntrl= 65765 (0x000100e5), Param= 11586 (0x00002d42) AXIS_THROTTLE_SET 151484 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1428 (0xfffffa6c) AXIS_ELEVATOR_SET 151484 *** AXIS: Cntrl= 65765 (0x000100e5), Param= 13507 (0x000034c3) AXIS_THROTTLE_SET 151531 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1423 (0xfffffa71) AXIS_ELEVATOR_SET 151531 *** AXIS: Cntrl= 65765 (0x000100e5), Param= 15171 (0x00003b43) AXIS_THROTTLE_SET 151578 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1420 (0xfffffa74) AXIS_ELEVATOR_SET 151578 *** AXIS: Cntrl= 65765 (0x000100e5), Param= 16195 (0x00003f43) AXIS_THROTTLE_SET 151641 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1457 (0xfffffa4f) AXIS_ELEVATOR_SET 151688 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1446 (0xfffffa5a) AXIS_ELEVATOR_SET 151750 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1437 (0xfffffa63) AXIS_ELEVATOR_SET 151797 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1430 (0xfffffa6a) AXIS_ELEVATOR_SET 151844 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1425 (0xfffffa6f) AXIS_ELEVATOR_SET 151906 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1460 (0xfffffa4c) AXIS_ELEVATOR_SET 151953 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1448 (0xfffffa58) AXIS_ELEVATOR_SET 152000 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1479 (0xfffffa39) AXIS_ELEVATOR_SET 152063 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1461 (0xfffffa4b) AXIS_ELEVATOR_SET 152109 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1449 (0xfffffa57) AXIS_ELEVATOR_SET 152172 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1439 (0xfffffa61) AXIS_ELEVATOR_SET 152219 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1432 (0xfffffa68) AXIS_ELEVATOR_SET 152266 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1466 (0xfffffa46) AXIS_ELEVATOR_SET 152266 *** AXIS: Cntrl= 65765 (0x000100e5), Param= 15939 (0x00003e43) AXIS_THROTTLE_SET 152328 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1452 (0xfffffa54) AXIS_ELEVATOR_SET 152328 *** AXIS: Cntrl= 65765 (0x000100e5), Param= 13763 (0x000035c3) AXIS_THROTTLE_SET 152375 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1483 (0xfffffa35) AXIS_ELEVATOR_SET 152375 *** AXIS: Cntrl= 65765 (0x000100e5), Param= 11714 (0x00002dc2) AXIS_THROTTLE_SET 152438 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1464 (0xfffffa48) AXIS_ELEVATOR_SET 152438 *** AXIS: Cntrl= 65765 (0x000100e5), Param= 9154 (0x000023c2) AXIS_THROTTLE_SET 152484 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1491 (0xfffffa2d) AXIS_ELEVATOR_SET 152484 *** AXIS: Cntrl= 65765 (0x000100e5), Param= 5825 (0x000016c1) AXIS_THROTTLE_SET 152547 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1470 (0xfffffa42) AXIS_ELEVATOR_SET 152547 *** AXIS: Cntrl= 65765 (0x000100e5), Param= 1856 (0x00000740) AXIS_THROTTLE_SET 152594 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1454 (0xfffffa52) AXIS_ELEVATOR_SET 152594 *** AXIS: Cntrl= 65765 (0x000100e5), Param= -1730 (0xfffff93e) AXIS_THROTTLE_SET 152641 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1444 (0xfffffa5c) AXIS_ELEVATOR_SET 152641 *** AXIS: Cntrl= 65765 (0x000100e5), Param= -5571 (0xffffea3d) AXIS_THROTTLE_SET 152703 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1435 (0xfffffa65) AXIS_ELEVATOR_SET 152703 *** AXIS: Cntrl= 65765 (0x000100e5), Param= -8900 (0xffffdd3c) AXIS_THROTTLE_SET 152750 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1429 (0xfffffa6b) AXIS_ELEVATOR_SET 152750 *** AXIS: Cntrl= 65765 (0x000100e5), Param= -11588 (0xffffd2bc) AXIS_THROTTLE_SET 152813 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1424 (0xfffffa70) AXIS_ELEVATOR_SET 152813 *** AXIS: Cntrl= 65765 (0x000100e5), Param= -14277 (0xffffc83b) AXIS_THROTTLE_SET 152859 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1461 (0xfffffa4b) AXIS_ELEVATOR_SET 152859 *** AXIS: Cntrl= 65765 (0x000100e5), Param= -16197 (0xffffc0bb) AXIS_THROTTLE_SET 152922 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1488 (0xfffffa30) AXIS_ELEVATOR_SET 152969 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1469 (0xfffffa43) AXIS_ELEVATOR_SET 153016 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1454 (0xfffffa52) AXIS_ELEVATOR_SET 153078 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1443 (0xfffffa5d) AXIS_ELEVATOR_SET 153125 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1435 (0xfffffa65) AXIS_ELEVATOR_SET 153188 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1429 (0xfffffa6b) AXIS_ELEVATOR_SET 153234 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1424 (0xfffffa70) AXIS_ELEVATOR_SET 153297 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1420 (0xfffffa74) AXIS_ELEVATOR_SET 153344 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1418 (0xfffffa76) AXIS_ELEVATOR_SET 153391 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1416 (0xfffffa78) AXIS_ELEVATOR_SET 153453 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1415 (0xfffffa79) AXIS_ELEVATOR_SET 153500 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1414 (0xfffffa7a) AXIS_ELEVATOR_SET 153563 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1413 (0xfffffa7b) AXIS_ELEVATOR_SET 153719 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1452 (0xfffffa54) AXIS_ELEVATOR_SET 153781 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1442 (0xfffffa5e) AXIS_ELEVATOR_SET 153828 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1434 (0xfffffa66) AXIS_ELEVATOR_SET 153875 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1428 (0xfffffa6c) AXIS_ELEVATOR_SET 153938 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1423 (0xfffffa71) AXIS_ELEVATOR_SET 153984 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1420 (0xfffffa74) AXIS_ELEVATOR_SET 154031 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1419 (0xfffffa75) AXIS_ELEVATOR_SET 154094 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1417 (0xfffffa77) AXIS_ELEVATOR_SET 154141 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1416 (0xfffffa78) AXIS_ELEVATOR_SET 154188 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1415 (0xfffffa79) AXIS_ELEVATOR_SET 154250 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1452 (0xfffffa54) AXIS_ELEVATOR_SET 154297 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1442 (0xfffffa5e) AXIS_ELEVATOR_SET 154359 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1434 (0xfffffa66) AXIS_ELEVATOR_SET 154406 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1428 (0xfffffa6c) AXIS_ELEVATOR_SET 154469 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1423 (0xfffffa71) AXIS_ELEVATOR_SET 154516 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1420 (0xfffffa74) AXIS_ELEVATOR_SET 154563 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1419 (0xfffffa75) AXIS_ELEVATOR_SET 154625 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1417 (0xfffffa77) AXIS_ELEVATOR_SET 154672 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1416 (0xfffffa78) AXIS_ELEVATOR_SET 154719 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1415 (0xfffffa79) AXIS_ELEVATOR_SET 154781 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1414 (0xfffffa7a) AXIS_ELEVATOR_SET 154797 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1413 (0xfffffa7b) AXIS_ELEVATOR_SET 169953 System time = 12:44:19, FS2004 time = 10:15:45 (17:15Z) 169953 *** FSUIPC log file being closed Memory managed: 2 Allocs, 84 Freed ********* FSUIPC Log file closed ****

Hi I seem to have lost my micture control. I am using a CH yolk (USB) and FS2004 is getting input from the yoke, yet I cannot change mixture using the axis. Neother, significantly, can I change mixture using the mouse! But the jeyboard commands work. In desperation I removed FSUIPC and then all works fine. Indeed, within FSUIPC there is no movement of the axis detected. Can you help? I downloaded the latest FSUIPC... Thanks John L PS I checked the forum before posting: my sensitivites are not set at zero, theya re on maximum...