sac601

Hi Peter I have the pay version of FSUIPC and WideFS for my FS9. I loaded FSX and I can't calibrate it it goes all crazy on me the yoke pedal etc.... If I want to install FSUIPC and WideFS in my FSX, do I have to pay again or my registration keys will work with it? Then do I have to calibrate with FSUIPC? Thanks Al

Ouf you are the man. You were right I took off all asignements for throtle and it work fine. Thank you so much Pete for your patient. God bless Al

It seems like I got the rudder , elevator and aileron working. My problem now is the throttle that goes crazy on me. When applying it goes back down then ack up then back down etc..... Al

Seems like my Go - Flight throttle could be the one causing the trouble I will check on that. Al

I was happy before because when I calibrated it with the FSUIPC it worked and the calibration was thebest ever. However this time (Because I had to reload everything) I disable the joycestick and tried to calibrated with FSUIPC but all number goes crazy and I can't calibrate it. I try to follow the document with the AXIS assignement but even by reading the document it is hard to follow. Sorry about that but I would need some help. I am even ready to call you for help. Thanks Al

Hi Pete. I had to reload all of my window 7 and my FS9 with my FSUIPC registered. I still have the same problem mentionned before and try to follow the instruction with Axis assignement and configuration. I was wondering if you could help me with MSN conversation or even with CrossLoop free program that you can get into my computor from your home? Thanks Al

Hey Pete, I am so exited. I read the guide and it work after little efford. I am so happy. You have a great program. Again I am a happy man. Best regard and God bless. Al

I will try to explain and hopefully you will be able to help me. When I open FSUIPC after open FS9, I go to Joystick Calibration. On the left part it says aileron under it says reset and there is numbers moving when I moved my joystick same thing below that with elevator. On the right of that there is MIN CENTRE MAX with set and number underneath. These numbers are not changing at all. It is like frozen. I will delete CH control manager because I want to stick with FSUIPC. Hope it is more clear about what I mean by the numbers in FSUIPC and you would know what could be the problem and solution. Thanks Al

I forgot, here's my system. Thank you Al Window 7 pro 64 bites Intel ® Core 2 Duo CPU E6850 @ 3.00 Ghz 4.00 GB (RAM) 64 Bit Operating System Nvidia GeForce 8800 GTX

I installed window 7 pro 64 bites to my computor and used FS9. I also installed the registered version of FSUIPC version 3.93 and registered version of WIDEFS believed to be version 6.78. I put all in these files into module of FS9. The problem is when I plug any yoke, joycetick or pedal (CH product) The elevator goes way up or way down and rudder way left or way right no middle. When I unplug them I can fly with the key board no problem. I tried CH control manager and I calibrated them and all were perfect during window calibration, Cantrol manager calibration and the FS9 calibration. However when I tried to calibrate with FSUIPC the numbers on the left are m oving no problem but the numbers on the right are not moving. I am very discourage and need help. Thank you Al I

I asked Project Magenta people how can I see teh Squawkbox traffic into my ND of PM. They said that I have to pass pass on the traffic info to Project magenta for Squawbx via FSUIPC. How can I do that? Thanks AL

We did all this and it was still kicking. I turn off all computer except the FS computer and opened one computer at the time. Everthing worked fine until we opened computer 4 with CDU and as soon as it opened it started to kick again. I turned computer 4 off and no more kicking. Note that we did not load the cdu/fms. Maybe this is the problem. Will test it again tomorrow without computer 4. Pete I just want to tell you how much I appreciate your patience with me. I am very very sorry about the problem and just hope to be able to enjoy it teh best way possible. Al

I run the PDF and EFIS in two different computers and it freeze up at the same time. Seems that the problem come from the main computer. Anyway, my friend who tries to help me will take a look at it. He sells computer and knows about them. I will keep you inform. Hope to find the problem. We have the same Ip address as required but we will go over it all over again. Thanks AL

I set all that and the program is running fine. They only problem is that the gages freeze. What can be the problem and what kind I do about it. If it freeze it is not in your documentation that I printed and read. Projet magenta people told me to contact you because the problem was Wide Server ??? Sorry if I ask you but I need help on this. Here's the log note pad. ********* WideServer.DLL Log [version 6.47] ********* Blocksize guide = 4096 (double allowed) Date (dmy): 21/07/05, Time 08:43:46.312: Server name is COMPUTER 84109 Initialising TCP/IP server 85140 Initialising IPX/SPX server 85140 IPX/SPX socket() failed [Error=10047] Address family not supported by protocol family 85140 Failed to start IPX/SPX Server 85500 Incoming connection Accepted ok (skt=3192) 85500 Incoming connection Accepted ok (skt=3360) 85500 Connected to computer "AL-6B0" running WideClient version 6.470 (skt=3192) 85500 Connected to computer "AL-6B013BA69872" running WideClient version 6.470 (skt=3360) 85812 Incoming connection Accepted ok (skt=3404) 85828 Connected to computer "AL-6B" running WideClient version 6.470 (skt=3404) 522703 Closing down now ... Memory managed: Offset records: 393 alloc, 393 free Throughput maximum achieved: 168 frames/sec, 17542 bytes/sec Throughput average achieved for complete session: 47 frames/sec, 4344 bytes/sec Average receive rate from "AL-6B013BA69872": 0 frames/sec, 24 bytes/sec Average receive rate from "AL-6B0": 0 frames/sec, 21 bytes/sec Average receive rate from "AL-6B": 17 frames/sec, 2038 bytes/sec ********* Log file closed ********* ********* WideServer.DLL Log [version 6.47] ********* Blocksize guide = 4096 (double allowed) Date (dmy): 21/07/05, Time 08:59:42.593: Server name is COMPUTER 55719 Initialising TCP/IP server 56500 Initialising IPX/SPX server 56500 IPX/SPX socket() failed [Error=10047] Address family not supported by protocol family 56500 Failed to start IPX/SPX Server 56891 Incoming connection Accepted ok (skt=3344) 56891 Incoming connection Accepted ok (skt=3356) 56891 Connected to computer "AL-6B" running WideClient version 6.470 (skt=3344) 56891 Connected to computer "AL-6B013BA69872" running WideClient version 6.470 (skt=3356) 57235 Incoming connection Accepted ok (skt=3376) 57235 Connected to computer "AL-6B0" running WideClient version 6.470 (skt=3376) ********* WideClient Log [version 6.47] Class=FS98MAIN ********* Date (dmy): 06/07/05, Time 10:41:15.484: Client name is FS 609 Attempting to connect now 3203 Error: TCP/IP needs ServerName or IP address! 3203 Failed to connect: waiting to try again 4218 Attempting to connect now 5906 Error: TCP/IP needs ServerName or IP address! ********* WideClient Log [version 6.47] Class=FS98MAIN ********* Date (dmy): 06/07/05, Time 10:43:21.640: Client name is FS 563 Attempting to connect now 5031 Error: TCP/IP needs ServerName or IP address! 5031 Failed to connect: waiting to try again 6047 Attempting to connect now 12172 Error: TCP/IP needs ServerName or IP address! 23328 ****** End of session performance summary ****** 23328 Total time connected = 0 seconds 23328 Reception maximum: 0 frames/sec, 0 bytes/sec 23328 Transmission maximum: 0 frames/sec, 0 bytes/sec 23328 Max receive buffer = 0, Max send depth = 0, Send frames lost = 0 23328 ********* Log file closed (Buffers: MaxUsed 0, Alloc 0 Freed 0 Refused 0) ********* Thanks Al

I check my WideServer.log and teh server name was computer Where do I modify that to the client server? Do I go to ClientServer.log ? IP Adress are all the same but still freeze for a few second while the plane keep on going. What the difference between WideClient.0.log and WideClient.log?

Thank you very much will try that. AL

Project magenta checked my system because it was freezing and they send me the following: As you can see from the wideclient log you failed to enter the servername or IP address, please check WideFS documentation and provide these parameters, you have to configure the communication to your own network specification. If using IP we advise top provide the IP address instead of the servername if possible... Where Can I find the info and fixe this problem? Thanks y'all AL

I loaded GF Display and other GF module appeared but my MCP did not appear. I wanted to try the PM auto pilot demo. Thanks Al

I bought the pay version of FSUIPC and try to load the Project Magenta Demo adn it does not work at all with my Go-Flight MCP. Is there a programing that I have to do with FSUIPC? How do I do that? i read teh FSUIPC manual but it is too complicated for me. Thanks Al kboulian@rogers.com

I forget to ask also, is there a place where I can find instruction how to set two computor to work with FS2004? Thanks again AL

I have FSUIPC registered but not WideFS yet. I am buying a second computor for my home cockpit flight sim 2004. I want to purchase Project Magenta which the second computor running it as well as GPS and FSNAV. Do I need WideFS for that? How the frame rate will be? THanks Al