Fly Telluride

Agian thanks. I know I mentioned teamspeak and or remote access, and you indicated you where nor familure with them, pehaps that could help. I mentioned the steps were all adressed, and the only difference is of course your new DLL files. l nice. I will go back through every stepand apply them agian. If no changes well we are back to here. I am still courious as to why the warning as it has appeared at Flight1 in respect to there traffic program and your registred version of your program. I am almost tempted to purchase anothr traffic program and install on my laptop as to see if it affects FS9 on my Laptop where your program is registared. There are no PFC files loaded, so it might be intresting to see. Oh well, I tell you what, I appreciate your time and help. I realize I am light years behind you in computer skills. I wished we could have gotten every thing to work. I guess I will be ok till I want to adjust and settings or say load up a four prop plane and creat a specific assinment for it. I will not look forwrd to that. As I mentioned I have appplied all the steps as you instructed and am glade to go back and re-work them agian this weekend. If no changes as in the first time around I want bother you agian. I appreciate your help. Kind regards. Mark.

Hello, I hope you are well. I am in Medical implant sales and travel a couple nights par week and as such am away from the PC that has all the goodies on it. It is Thursday early PM and I may be home tonight in time to work further. I can assure you every step you have asked has been taken on my end. I appreciate your offering all of the steps ECT... The reason I do not comment on every single step is because if they are relatively simple I do them and if improvements where to happen I would report the news. I don’t need to go back and grab quotes, as I am sure you recall you telling me to do the steps and stop being so hesitant. So I tried to move it along for you. I have felt you are rather put off with me as to the time it takes me to get steps accomplished. Through out the discussion I have tried to communicate my fear of getting in over my head with changes and never being able to resolve this issue or even to get the system back to the way it was prior to the install when the menu started appearing covered on the lower bottom and rt sides. I feel no matter what I do here its causing you to be put off with me. With that said I have made every attempt to let you know I respect your bust schedule and most appreciate your extreme effort to help with this matter. I do really appreciate your effort to help me with the errors I have experienced from post install of the program mentioned at the beginning. I do not know what has happened here. All I know is prior to the install of the said program the PFC menu worked and wad visible all the way across and up and down. After the install of said program it is not. It may have not been fully programmed from my end, but it worked. I like you wished it was resolved. You mentioned if it came down to it I could change settings in a particular file, well that’s something that will be a problem for me as I as stated I am not the most savvy PC person in the world/ You asked the other day where I had been because you thought from my comments I wanted it fixed ASAP, well of course I do. However I have a family and other obligations in the case this week while being on the road with work. I have other obligations that take priority, and with that provide the means and time to spend on this hobby. You mentioned Project Magenta and I appreciate you bring it up. Someday I do appreciate you bringing it up. I hope someday to explore that. For now I am feeling like one man in the ocean with a small life raft with the problem from post install (the reason for saying post install is to reference for time line purposes). As you know I cannot re-install the dll from before the install and return the system to its prior state. I have no idea I mention the DLL's because that’s what I thought I remembered the warning saying from Flight 1. I am referencing the DLL warning they posted in reference to your registered version of your software. I hope that you were able to get with them. After you mentioned you were a little surprised that was on there site, the warning that is. The word surprised may not be what you said but for some reason I just remember that part of it seemed to be news. Anyhow, I am sitting in the Hospital food court area and need to run. As I mentioned it is not my intent to frustrate you in any way, All the steps have been followed all be it not as fast as you would like. That is my fault. I will do my best to learn things I don’t understand as fast as possible. I offered to purchased another copy of your registered program for my home PC as a jester of thanks for your help/ As I mentioned I have a registered copy on my lap top that’s with me now. I realize I don’t need the registered version on the home PC but out of respect and appreciation will still more than happily do. Out of your kindness you indicated not to worry about, but I am happy to do so. Maybe we can clear the way after the issues here are hopefully fixed as I would not want any override to hurt your efforts up to this point. I am worried here that you may be out of ways to attempt to get the PFC menu back in tact. I hope something good happens for it to be restored. I appreciate you effort and drive to assist me. I will try to be as much help as possible in accomplishing your instructions as quick as I can. I hope to hear back from you. I guess if all fails us we can put things back the way they were before the Traffic install. I was unable to do so but maybe there’s a way. But again perhaps this will fixed. Again thanks. Sincerely Mark.

Peter I hope to speak with you tommorow. Thanks so much for your help. Mark.

Thanks Pete. I am cuatious if I am unsure if I am following your directions correctly. SO I owe you an appology and at the same time want to followyour instruction from a to z. OK then, I am current with all that I can see and unzipped your last file into FS9 Main folder and of course your PFC DLL into the modules. The new program looks intresting. It told me on start up that the last two items where not conected or somthing about the last two items. All else checked ok. However the bottom 1/4 and rt 1/4 of the menu is like it was last pm. Of course the items in the menu relect your work but still the menu on the bottom and rt is the same as last pm. I will syand by and appreciate you help. I will try to ck here every 30 mins or so for a while this PM. Some guest over but yhis is rally important so they will have to be flexable as I appreciate your time. Thanks agian Marl.

I have the new PFC DLL you made and the Back up both in folders off to the side. I am unsure since you have the info on the sys32 versions I sent you what to do . I will leave the old version PFC DLL in the modules folder of fs9 till you tell for sure what the next step is. It sounds like we are past the step off testing each as I sent you the data on each of the files. Anyhow, better to be carfull here and not mess up agian, Thanks. Mark.

Pete I forgot it is COM I

Man, I cant see the list I jyst tried to send you of all the VERSIONS WITH DATES ECT I hope you get them I cant see them on my end saved. Please advise. Thank you. Mark

Pete here is the file name , location, date created and date modified along with the version# of all results from todays search of COMCTL32.DLL What comctl32.dll Location :\Documents and Settings\Mark\Desktop\FSUIPC\pt scr\search results Created Yesterday, July 03, 2005, 5:36:17 PM Modified Thursday, August 29, 2002, 6:40:50 AM Please look at the create and Version 5.82.2800.1106 Modify dates here? comctl32.dll C:\WINDOWS\$NtServicePackUninstall$ Wednesday, September 29, 2004, 11:34:54 PM Thursday, August 29, 2002, 6:40:50 AM 5.82.2800.1106 comctl32.dll C:\WINDOWS\system32 Saturday, August 18, 2001, 8:00:00 AM Wednesday, August 04, 2004, 3:56:41 AM 5.82.2900.2180 comctl32.dll C:\WINDOWS\ServicePackFiles\i386 Saturday, January 31, 2004, 10:20:50 PM Wednesday, August 04, 2004, 3:56:41 AM 5.82.2900.2180 comctl32.dll C:\WINDOWS\WinSxS\x86_Microsoft.Windows.Common- Thursday, December 25, 2003, 3:34:42 AM Saturday, August 18, 2001, 8:00:00 AM 6.0.2600.0 comctl32.dll C:\WINDOWS\WinSxS\x86_Microsoft.Windows.Common- Saturday, January 31, 2004, 10:34:29 PM Thursday, August 29, 2002, 5:41:32 AM 6.0.2800.1106 comctl32.dll C:\WINDOWS\WinSxS\x86_Microsoft.Windows.Common- Friday, April 16, 2004, 6:56:04 PM Friday, April 16, 2004, 6:56:04 PM 6.0.2800.1515 comctl32.dll C:\WINDOWS\WinSxS\x86_Microsoft.Windows.C Wednesday, August 04, 2004, 3:57:00 AM Wednesday, August 04, 2004, 3:57:00 AM 6.0.2900.2180 They are in the order the search engine reported them. I hope this helps you out. Mark.

Pete the one I just sent to you was the 3rd one down from the top. Agian from the list I typed out last PM. The 3rd one down is the only one that clearly says system32 or at least says it far enough up the file path where it is visable. I hope this helps. Mark.

Pete is this it is the one closest to the list I typed out for you last PM comctl32.dll C:\WINDOWS\system32 5.82.2900.2180 Thank you. Mark.

Heelo, 1st I will be glad to check the folder your asking about. Please tell me whee the System 32 folder is located and the path to the folder you want the version number of please. I am unclear here. YOu mentioned It sounds like it was NEVER right the way it was in any case -- the COM port problem especially. Well the menu worked where I could select the quads that did not stay in the settings. I do however look forward to getting all the planes to slave to a quad once this is reconfigured. I will go ahead with the file you sent and place it in modules after a Back up of the one there now. Also in reguard to the COMCTL32 folders I will need to know where to access them from. The info I suplied yesterday on them was from the search resullts and I was not able to follow them from the search results to there folder. OK Please tell me where the sys 32 is and the path to the folder you want the version of and I will get it to you please.

I just re-sent the pic and the INI. I hope these find you. Please advise. Thank you. Mark.

Hello Pete: You mentioned “Fine. The PFC.DLL is designed to deal with this smoothly and automatically, either be automatic detection of the aircraft type, or by you "registering" each of your aircraft with a specific quadrant. The latter method is surer, but either should work provided you've enabled each quadrant you own.” Yes most of the time it dose, however every so often it will act as if it is unsure which quad is being attached. I know we tell it but with the menu blocked that is a problem. This is mainly between the old style Baron and the New style Baron quads. Oh well. I am looking forward to the feature you described here. That's crazy! Once the correct COM port is set in the PFC.INI file it is NEVER changed again unless you explicitly set it. Even if you unplug the device, the driver will still sit there trying to activate it, forever if need be. I use a Cirrus II system and it all connects with serial or pins what ever the proper terminology is. I don’t have your manual handy but I thought I read there or maybe from Eric at PFC that the serial connections are the most stable. Oh yea I forgot above to mention that most of the aircraft I sim in I set up per your manual and indeed almost always they adapt as set up, adapt relating to the proper assignments in the menu being in place. I think the resets are when its say another piston twin that’s not assigned and I would click Baron quad in the drop down to speed along. You are right if assigned I should never need to see the menu, but to assign the planes I need the menu. I open a lot of zips but don’t create them. My secretary dose that, and she would cause me harm if I asked her to send FS9 files. I could however send another e-mail to you an attach the PFC INI, please let me know. Are the instructions for the windows 32 file you kindly attached as follows: Re-boot and once on desk top before I run and program from there place the file you attached into the windows system 32 folders? Will I need to overwrite or choose no if the message appears when doing this? Also please keep in mind if you want to connect over the web, Teamspeak, remote assistance or what everwould benifit your time the most just let me know. Do you think this can be put back the way it was? I almost feel that I had spent some time in the modules folder that a file next to one I was working with could have been deleted or somthing like that. I dont remember this happening put it is like in Plane accidents 90% of Plane accidents are Pilot error, or so says the workshop leader I heard recently. OK I just e-mailed you (same address as last PM) the PFC INI. Agian I appreciate your time and effort. Mark.

Hey Pete I am just wantinga confirmation you recived the pic and the last verbage I sent was making sence. When ever you get time. Agian I appreciate the help. Now that I think I can send pics would you like one of my last secretary, blonde and.....kidding of ccurse. Talk with you soon. Agian thanks.

OK your pic is on the way. Mark.