odrezet77

Yes, the log is here : C:\Users\PCMSFS\AppData\Local\Packages\Microsoft.FlightSimulator_8wekyb3d8bbwe\LocalState\packages\fsuipc-lvar-module\Work if fsuipc_wasm.ini is in the same folder, it doesn't work. I have to reload to make it working. FSUIPC_WASM.log

So, I've tried to this FSUIPC_WASM.ini in some locations, as stated in your post and the documentation : FSUIPC_WASM.ini [General] ; LogLevel: Disable, Info, Debug, Trace, Enable LogLevel=Debug ; LogType: File, Console, Both LogType=Both ; StartEventNo: this must be the same as defined in the FSUIPC7.ini file StartEventNo=0x1FFF0 ; LvarUpdateFrequency: frequency to update internal lvar values list and set in CDA ; Accept values: Off, 6Hz, Second, Frame, VisualFrame. If using 'Off', update timer must be active in a client LvarUpdateFrequency=6Hz LvarScanDelay=45 Locations : C:\Users\PCMSFS\AppData\Local\Packages\Microsoft.FlightSimulator_8wekyb3d8bbwe\LocalState\packages\fsuipc-lvar-module : Same behavior C:\Users\PCMSFS\AppData\Local\Packages\Microsoft.FlightSimulator_8wekyb3d8bbwe\LocalState\packages\fsuipc-lvar-module\Work : Same behavior D:\MSFS\Community\fsuipc-lvar-module : it seems to be ok ! 😊 I will make further tests. Thank you ! Edit : I have a Deluxe Premium DVD Edition. If it can change something.

John, I do confirm that i have to click reload and list lvars to see the needed ones Then, all is working fine. It's same behavior if FSUIPC is launched by (MSFS) or if FSUIPC is launched after MSFS. It seems to be ok if FSUIPC is launched after MSFS. Here's the Wapi section of Fsuipc ini file : [WAPI] EnableWAPI=Yes LogSeparately=No LvarScanDelay=60 The LvarScanDelay does not change anything to this behavior. You will find my fsuipc.log in attachments. Oliver FSUIPC7.log

Dear John, Than you for this quick -and clear- answer ! My version is 7.2.12, so i will update it. I will make further tests and let you know. Oliver.

Hello, I want to use some of my DIY controls (like flaps lever) It's working fine with stock aircrafts, lua, sioc and fsuipc offsets. However, it doesn't work with JustFlight's aircraft, as they use Lvars. With Wasm module configured and enabled, i can list and identify lvars needed. But each time i launch MSFS, i have to run a flight, then launch fsuipc, go to add ons, Wasm and list LVARs. Then, lvars can be used, and it works. If these actions are not done, then my lua script won't work as needed lvars are not there. So, is there a way to use an lua script to list lvars and/or use wasm module ? Thanks for your help, Kind regards. Oliver.

Thank you Pete ! It's clear and i will follow the threads you gave. Oliver

Good morning ! I'm a registerd user of FSUIPC 7 (7.0.6) for MSFS and i've jsut bought a new aircraft : Justflight Piper Arrow 3. It doesn't work with my Saïtek panels (a lot of buttons are not working) so I wanted to check if lvars are used by this aircraft, but i can't find the log lua file you were providing before. I have no more access to my old computer (P3Dv5) to get it back. Is there a way to get this file ? Have a great day and take care ! Oliver.

Well, I should have reread my post before posting. GearStateVal should be 0 or 49149 if everything is ok. All gears down or up. I just want to manage my PDMG gears with my saitek switch panel. 3 Lights are green if all gear are down and ok. 3 Lights are off when all gears are up and ok. 3 lights are red when gears are operating. If a gear is not fully up or down, its lights is red. My whole code works fine when comparison is ok (when Gear_Down_Up is called with a "manual" value and not a result of 3 ipc.read values) Oliver. function Gear_Lever() gear_nose=ipc.readUD(0x0BEC) gear_left=ipc.readUD(0x0BF0) gear_right=ipc.readUD(0x0BF4) GearStateVal = gear_nose + gear_left + gear_right Gear_Down_Up(GearStateVal) end function Gear_Down_Up(GearStateVal) -- PDMG EVT_GEAR_LEVER (69632 + 768) testVar = ipc.readUD(0x3360) dev = ipc.get("dev") wrf = ipc.get("wrf") if logic.And(testVar,0x80000) ~= 0 then gear_nose=ipc.readUD(0x0BEC) gear_left=ipc.readUD(0x0BF0) gear_right=ipc.readUD(0x0BF4) GearState = gear_nose + gear_left + gear_right ipc.control(66080,16383) -- OFFSET FSX OK while GearState ~= GearStateVal do gear_nose=ipc.readUD(0x0BEC) gear_left=ipc.readUD(0x0BF0) gear_right=ipc.readUD(0x0BF4) GearState = gear_nose + gear_left + gear_right ipc.display("RUN --> N : " .. gear_nose .." L : " .. gear_left .. " R : " .. gear_right .. "\n" .. " GearStateVal : " .. GearStateVal) --.. " / GearState : " .. state) s = string.char(0,56) com.writefeature (dev, s, wrf) end if gear_nose ~= 16383 then r1=1 g1=0 else r1=0 g1=1 end if gear_left ~= 16383 then r2=1 g2=0 else r2=0 g2=1 end if gear_right ~= 16383 then r3=1 g3=0 else r3=0 g3=1 end -- Concaténation des valeurs dans une chaîne val = "" .. r1 .. "" .. r2 .. "" .. r3 .. "" .. "" .. g1 .. "" .. g2 .. "" .. g3 -- Conversion en binaire de la chaîne val convertie en nombre valBIN = (tonumber(val,2)) s = string.char(0, valBIN) com.writefeature (dev, s, wrf) else ipc.control(66079,0) -- OFFSET FSX OK while GearState ~= GearStateVal do gear_nose=ipc.readUW(0x0BEC) gear_left=ipc.readUW(0x0BF4) gear_right=ipc.readUW(0x0BF0) GearState=gear_nose + gear_left + gear_right ipc.display("RUN --> N : " .. gear_nose .." L : " .. gear_left .. " R : " .. gear_right .. "\n" .. " GearStateVal : " .. GearStateVal) -- .. " / GearState : " .. state) s = string.char(0,56) com.writefeature (dev, s, wrf) end if gear_nose ~= 0x00000000 then r1=1 g1=0 else r1=0 g1=1 end if gear_left ~= 0x00000000 then r2=1 g2=0 else r2=0 g2=1 end if gear_right ~= 0x00000000 then r3=1 g3=0 else r3=0 g3=1 end -- Concaténation des valeurs dans une chaîne val = "" .. r1 .. "" .. r2 .. "" .. r3 .. "" .. "" .. g1 .. "" .. g2 .. "" .. g3 -- Conversion en binaire de la chaîne val convertie en nombre valBIN = (tonumber(val,2)) if valBIN == 07 then s = string.char(0, 00) else s = string.char(0, valBIN) end com.writefeature (dev, s, wrf) end end

Pete I'm sorry. the first attempt to post my topic returned an error and asked me to send it again ... didn't know it was already sent.

Hi, The code below doesn't work, and i don't understand why. GearStateVal value is send to Gearr_Down_Up function, and is compared to a var called GearState. Values of both vaqrs are shown with ipc.display, and are right. So why the comparison will never work ? If values of 16383 or 0 are sent, the comparison work and it will work. If vGearValState is sent, with values of 16383 or 0, it will not work ... Why ? 0 is 0 ... and 16383 is 16383 ... Thank you for your help ... Regards, Oliver function Gear_Lever() gear_nose=ipc.readUD(0x0BEC) gear_left=ipc.readUD(0x0BF0) gear_right=ipc.readUD(0x0BF4) GearStateVal = gear_nose + gear_left + gear_right Gear_Down_Up(GearStateVal) end function Gear_Down_Up(GearStateVal) -- Gear_Lever_DOWN bit : 2^19= 524288 -- PDMG EVT_GEAR_LEVER (69632 + 768) testVar = ipc.readUD(0x3360) dev = ipc.get("dev") wrf = ipc.get("wrf") if logic.And(testVar,0x80000) ~= 0 then gear_nose=ipc.readUD(0x0BEC) gear_left=ipc.readUD(0x0BF0) gear_right=ipc.readUD(0x0BF4) GearState = gear_nose + gear_left + gear_right ipc.control(66080,16383) -- OFFSET FSX OK while GearState ~= GearStateVal do gear_nose=ipc.readUD(0x0BEC) gear_left=ipc.readUD(0x0BF0) gear_right=ipc.readUD(0x0BF4) GearState = gear_nose + gear_left + gear_right ipc.display("RUN --> N : " .. gear_nose .." L : " .. gear_left .. " R : " .. gear_right .. "\n" .. " GearStateVal : " .. GearStateVal) --.. " / GearState : " .. state) s = string.char(0,56) com.writefeature (dev, s, wrf) end end end

Hi, The code below doesn't work, and i don't understand why. GearStateVal value is send to Gearr_Down_Up function, and is compared to a var called GearState. Values of both vaqrs are shown with ipc.display, and are right. So why the comparison will never work ? If values of 16383 or 0 are sent, the comparison work and it will work. If vGearValState is sent, with values of 16383 or 0, it will not work ... Why ? 0 is 0 ... and 16383 is 16383 ... Thank you for your help ... Regards, Oliver function Gear_Lever() gear_nose=ipc.readUD(0x0BEC) gear_left=ipc.readUD(0x0BF0) gear_right=ipc.readUD(0x0BF4) GearStateVal = gear_nose + gear_left + gear_right Gear_Down_Up(GearStateVal) end function Gear_Down_Up(GearStateVal) -- Gear_Lever_DOWN bit : 2^19= 524288 -- PDMG EVT_GEAR_LEVER (69632 + 768) testVar = ipc.readUD(0x3360) dev = ipc.get("dev") wrf = ipc.get("wrf") if logic.And(testVar,0x80000) ~= 0 then gear_nose=ipc.readUD(0x0BEC) gear_left=ipc.readUD(0x0BF0) gear_right=ipc.readUD(0x0BF4) GearState = gear_nose + gear_left + gear_right ipc.control(66080,16383) -- OFFSET FSX OK while GearState ~= GearStateVal do gear_nose=ipc.readUD(0x0BEC) gear_left=ipc.readUD(0x0BF0) gear_right=ipc.readUD(0x0BF4) GearState = gear_nose + gear_left + gear_right ipc.display("RUN --> N : " .. gear_nose .." L : " .. gear_left .. " R : " .. gear_right .. "\n" .. " GearStateVal : " .. GearStateVal) --.. " / GearState : " .. state) s = string.char(0,56) com.writefeature (dev, s, wrf) end end end

Thank you Pete ! I will try asap and I will let you know .

Thank you ! I will try and let you know !

Hello, As I am creating an LUA file for a PDMG 747, is it possible to affec this LUA file to this aircraft only, as it will be loaded automatically ? Regards, Olivier.

Okay, it seems to be clear . So, may your solution should work despite your answer ?

Trying to play with tail numbers, I tried this : Read each offset from 313c to 3148 (those affected to ATC id) ... For this aircraft tail number (FSX cessna default) N760PL : I get these values : 313c - 78 - N 313d - 55 - 7 313e - 54 - 6 313f - 48 - 0 3141 - 76 - P 3142 - 48 - 0 So, no matter the tail number : Offset 3142 is always 0 (zero) as a terminator ... I'm using FSUIPC 4.937 registered. Edit : Same behavior with 4.939.

Ok Pete, Thank you for your quick reply. Unfortunately, Link2FS does not provide "String" type from FSUIPC. I have to find another way. Linda, maybe. Happy Easter ! :razz:

Hi, As I am discovering the use of Arduino boards, I would like to show the tail number of my Aircraft on a LCD display, connected to the Arduino board. The offset I need should be 0x313C. Using Link2FS to communicate with FSX/FSUIPC and Arduino, I get this value : 60710508774988 ... And I don't know how to handle this value to display a string ... I googled this for a long time and ... Still no idea ... May someone help me ? Oliver.

I got it ! :razz: A very special thanks to Pat_59 And Dreambox ... :cool: In the "HID.LUA" file , add these two lines : ipc.set("dev",dev) ipc.set("wrfr",wrf) below this one : dev, rd, wrf, wr, init = com.openhid(Vendor, Product, Device, Report) This part of your file should be like this : In your "Radio.lua" file, add these lines to switch on green leds : In your "Radio.lua" file, add these lines to switch on red leds : That's all ... Let's play ! :razz: Hope it will help ... Regards.

Hi, I've found this topic about Saitek Switch Panel Leds : http://forum.simflight.com/topic/71786-programming-of-the-saitek-pro-flight-panels-with-fsuipc-and-lua/ Indeed, i'm looking for explanations or samples about this command : com.writefeature(dev, s, wrf) The goal of my request is to switch on (red or green) leds on Saitek Switch Panel. May someone help me ? Best regards, Oliver.

Pete, Sometimes, FSX is going wrong. Same error when starting ... I found this issue : FSX is crashing if FRAPS is already loaded ... Just close it, and restart FSX ... I don't know why the error is about FSUIPC ... Is FRAPS working with it ? Hope it will help ...

Yes ! :razz: Fsx is running fine again ! thanks for your help .... No problem ! :razz:

Pete, Thank you for your quick reply ! Fsuipc was working fine for months ... I've tried this : "NEW! With effect from version 4.85 of FSUIPC, a small DLL called FSUIPC4_Loader is supplied inside the main downloaded ZIP file. If you place this into the FS Modules folder and re-run the FSUIPC4 installer, then the Loader will be loaded by SimConnect instead of FSUIPC4 directly, and that Loader will load FSUIPC4 itself after a few seconds. This may help get over the SimConnect bug." Version 4.929 seems to work fne... I've tried this too : " Go to Internet Explorer. Select Tools -- Internet Options -- Content -- Publishers -- Trusted Publishers, and make sure SimFlight GmbH is listed there. If not, right click on FSUIPC4.DLL, select Properties -- Digital Signature, select the certificate and click -- Details -- View -- Install Certificate. Click Next or OK all the way through. Then go back to Internet Explorer and find the Certificate in the Other Publishers list. Export it to a file, and go to the Trusted Publishers section again and Import it. " In "details" tab, i can't see an item like "digital signature" ... Maybe it was for older versions ?

Hi there, Since v4.929, FSX always shows this message : I had to uninstall and install v4.927. FSX seems to be ok... Any idea ? Thank you.

Hi (Again) ;o) I got my answer : the "Run1" command in the [user] section of the ini file works fine ... Great !!!! Ave a nice day !