BobP

Hi and thank you for the quick response. I have downloaded and the left engine will not start. Neither 'control E' nor manually attempting an engine start works. Thanks. FSX SP2 Win 7 64 bit current SP Bob Nevermind, I got it. Thank you again for the quick help. Bob

Hi, I can't find where to download my purchased product. I have receipts from BT Micro and Paypal but nothing from Feelthere for download. Thank you in advance. Bob

Pete, I could not match the key on left with the Path. In any case, I reinstalled the GF package and it is now working as it should. I apologize for the confusion describing my problem as it's difficult to precisely state what we are seeing when we don't know what we and it's doing. :D As always I appreciate your quick attention and suggestions. Thanks. Bob..

Pete, The log does NOT show any errors or delays associated with the Saitek joystick which is below. The registry path is: C:\Program Files (x86)\GoFlight\GFConfig.exe Path: C:\Program Files (x86)\GoFlight I apologize, but I do not know how to find the registry key. Thanks. Bob.. ********* FSUIPC, Version 3.96 by Pete Dowson ********* Running on Windows Version 5.1 Build 2600 Service Pack 2 Verifying Certificate for "C:\Program Files (x86)\Microsoft Games\Flight Simulator 9\MODULES\FSUIPC.dll" now ... SUCCESS! Signature verifies okay! Running inside FS2004 (FS9.1 CONTROLS.DLL, FS9.1 WEATHER.DLL) User Name="Robert Price" User Addr="bobpr@comcast.net" FSUIPC Key is provided WideFS Key is provided Module base=61000000 ClassOptions: UIPCMAIN=FF7F, FS98MAIN=FF7F, FS2KMAIN=FF5E WeatherOptions(Orig)=40003605[40003605] InitDelay: 0 seconds WeatherReadInterval=4 LogOptions=00000001 DebugStatus=255 4992 System time = 13/01/2010 10:14:44 4992 \\ROBERT-PC\Flight Simulator 9\ 4992 System time = 13/01/2010 10:14:44, FS2004 time = 12:00:00 (00:00Z) 10249 \\ROBERT-PC\Robert\Documents\Flight Simulator Files\KRDG.flt 10265 AIRCRAFT\c172\Cessna172SP.air 10764 Aircraft="Cessna Skyhawk 172SP" 72072 \\ROBERT-PC\Robert\Documents\Flight Simulator Files\UI generated flight.flt 72260 Clear All Weather requested: external weather discarded 73102 Advanced Weather Interface Enabled 89903 Traffic File #19 = "scenery\world\scenery\traffic" 110808 WeatherOptions set, now 40003605 (timer=0) 111931 Traffic File #20 = "scenery\world\scenery\traffic_krdg-ga" 119793 Traffic File #21 = "scenery\world\scenery\traffic_krdg-usair"

Understood Pete. I'll get back when I have completed your suggestions. Thanks. Bob..

Pete, I get one or the other. One being the Goflight knobs, buttons or the Joy Stick. The other recognizing the Saitek Yoke but not the GF module buttons etc. I can't get it to recognize both. Right now I have the GFDev.dll in the main windows folder and the main GoFlight folder using. I using FS9. I can setup buttons on the flight Yoke, but it does not recognize the Goflight Buttons. Earlier I was able to create a couple mouse macros, however, each time I moved a GF knob, the joy stick buttons were not recognized. The registry paths seem correct to the GFDev config etc. I hope all this makes sense. Thanks. Bob..

Pete, thank you for the quick reply. I did indeed mean GFDev.dll and I do have the current version available on your download site. I have installed several versions of Goflight over the years and certainly could have 'fooled' the registry. I'll verify the registry path. I also dumped a copy of the .dll in the main windows folder. Thanks. Bob.. :)

Hi Pete, I have search the forums and understand the following: The buttons and switches on all GoFlight units are recognised in FSUIPC just like any other buttons and switches, providing you have "GFDev.DLL" installed in the same place as your GFConfig program (which is where it usually is) or, for FSX only, in the FSX Modules folder. However, it does not recognize any rotary knob, button or switch on my modules with 'Button And Switches' selected in either FS9 or FSX. Right now I would like to set up mouse macro's for the Eaglesoft Citation X. I just installed the latest FSUIPC for FS9 and GF.dll (installed with GF config). I am running 64bit Vista with FS9, tons of memory and an Nvidia 260 card. What am I missing? :) Thanks in advance! Bob..

Will do and thanks Pete.

I changed the "intercept x axis" thingy to yes in the init file and FSX loaded right away. Thanks.

I double checked to make sure and the PFC dll is sitting on my desktop. :D I have been flying FS9 most of the time, but the last flight, I had to go through FSUIPC to get the throttle axis to work with the CH Yoke throttle. Bob...

Hi Pete, I am pretty sure I did assign the axis via FSUIPC. I normally do not as I use the PFC throttle quadrants via the PFC dll, but I had removed it trying to trouble shoot something else. Thanks again for looking at it. Bob..

Thanks. I will do some local trouble shooting here. I am using Windows XP. Bob...

Hi Pete, FSX hangs at the splash screen with 4.15 in the modules folder. I did remove the init file for a clean start. FSX starts fine without the dll. Bob...

Thank you Peter. I actually thought I had deleted the old init, as I usually follow your recommendation to do so. I could not find any settings in the calibration section changed, but the deletion of the config file fixed it. Thanks. Bob..

Hi Peter, I have a phenomena occurring with FSUIPC and any default aircraft. I did not notice this with 4.03. Notice the plane flies with the right wing lowered while the autopilot is on and should be straight and normal flight. The ball slip/skid indicates rudder is required. However even with the default Lear and Yaw Damper engaged has no affect on this. It only occurs with FSUIPC installed and I can increase the affect by increasing the torque and P factor settings in the realism menu. Thanks. Bob..

Pete, I'm getting a repeatable crash of the GF data bridge with 4.03 and 4.04. Where can I find 4.02? FSX loads fine. As soon as I attempt to change any parameter (say heading) on the GF module, the data bridge crashes. Bob...

Hi Pete, I am seeing a small FPS hit via FSwide and FSUIPC FSX. It appears to be around 3-5 fps. That should be trivial, but with FSX every FPS counts!:) I do have severe stutters (frames drop to 5 or 6) when AS6.5 is updating weather stations. The same thing happens with Weather Maker RX Demo when it is updating. :) I removed Windows defender from both my main PC and Client. Additionally I check all the shares and have mapped drives with read/write permissions. Is this part of the MS simconnect issues? I am running Windows Live One care AV and FW and placed FSX and ASV on the allow lists. Thanks. Dell XPS HT 3.6 P4 (HT off) 2 gig memory Windows XP Pro (client) - Windows XP home main - Both SP2 Radeon XT850 Pro 256mb Catalyst 6.9 with control Panel Bob...

Hi Peter, I just want to add to your knowledge base concerning firewall and AV programs affected. I am also seeing a 30 to 40% FPS degradation with FSUIPC 4.02 in FSX as compared without it. I am using Windows Live One Care for AV, Windows Defender (integrated with One Care now) for AS and the windows firewall built into One Care. Thanks... System Summary Dell XPS HT 3.6 P4 (HT off) 2 gig memory Radeon XT850 Pro 256mb Catalyst 6.9 with control

RE: PFC DLL I cannot get the PFC throttle quadrant mixture or prop axis to move the aircraft axis. The throttle axis works fine. Both mixture and prop respond in the "Quadrant" tab of the PFC menu, however, when I return to the sim, neither will move in response to lever motion. The 2 engine jet quadrant works fine. Bug? Or operator error. Thanks. Bob...

Hi, I have the registered version. I do not understand how to program a joystick button from the button tab. I'm attempting to do it the same as FS9. However, every time I push a button on the joystick (CH Yoke) I get a message "Conditions are attached must programed in FSUIPC.ini" or something close. All I want to do is assign a joystick button to "shift 3" for the GPS. I read the advanced documentation. Do I have to manually program that now? If so, what is the tab for? Thanks. Bob...

Never mind Peter. I apparently had an explorer window pop up which masked the MS Gauge trust thingy. Any way I agreed to trust you :) and Add Ons is visible. My PFC throttle quadrant also now works again. Will FSUIPC allow me to assign the mouse center button to the space bar? Would be very nice for VC panning. Thanks again. Bob..

Hi, I just downloaded FSX and assume I could use it as an unregistered version. However, the modules folder does not show up in the FS menu. Also, will the beta PFC throttle quadrant DLL work with the new final FSUIPC? Thank you advance. Bob...

Hi, I just purchased Widefs and cannot register it because my email addressed was changed over a year ago. Please advise. Bob...