Jump to content
The simFlight Network Forums

smokeywood

Members
  • Posts

    19
  • Joined

  • Last visited

Everything posted by smokeywood

  1. Greetings, Thank you for this information I did as you instructed an everything seems to be working just fine now. Gene
  2. Greetings, Thank you for the quick sresponse. This morning my PMDG was the first aircraft that I loaded up in MSFS 2020 and I took a screen shot of the FSUIPC interface that shows the CRJ7 as the plane and with the "profile specific" selected and greyed out. I am also attaching the ini and log files as you requested. Thank you FSUIPC7.ini FSUIPC7.log
  3. Greetings, I have paid version FSUIPC7 for MSFS 2020. I fly 2 add on planes the Aerosoft crj7 and PMDG B738 so I only have 2 profile ini files in the profile folder. My problem is that when I load the CRJ all is good but if I load the PMDG B738 FSUIPC7 loads the CRJ profile and the "Profile Specific" box is checked and greyed out so I can not change anything. The only way I have been able to work around this is remove [Profile.CRJ 700] 1=CRJ700ER American Eagle N508AE 2=Mountain Air from the main FSUIPC ini file and load the PMDG B738 I have deleted the fsuipc.ini main file and rebuilt it after a restart and setup my planes all over but get the same result when I try to load something other than the CRJ7 I would appreciate any suggestions or help to correct this problem. Thank you Gene
  4. Greetings, This is what I have tried so far. I uninstalled fsuipc and reinstalled in a separate folder I modified the ini to auto assign letters I restarted the sim and loaded one of my planes. I am still getting jittery movements when scanning for axis but managed to get all of them assigned. My yoke calibrated ok but when I tried to calibrate my throttle quadrant I got the throttle levers to work but the levers I assigned to spoiler and flaps when I tried to move them to calibrate the numbers did not change in the upper and lower windows. I got the high number but instead of getting a large neg number it just went to zero and the responding controls in the plane did not move. I am at a loss I have been using this program for years and never had an issue such as this which happened just kind of out of the blue so to speak. I am loading all of the files that I hope will help determine what my problem is. Thank you for your time and help Gene FSUIPC6.log FSUIPC6.ini iFLY B737-800.ini FSUIPC6.JoyScan.csv
  5. Greetings, Thank you for the quick response. I was using 6.1.4 prior to updating. I have not tried to calibrate anything yet in p3d v5 since I updated. I will change the install folder sometime today and see if that helps. One of the issues was that it seems like fsuipc was not finding my controllers when I did a scan for an axis the letter that was always there was "U" and would not change from that. I will try your suggestions and get back thank you. Gene
  6. Greetings, I am using windows 10 with AMD FX 8370 processor, nvidia GTX 1060 video card and 16GB ram. I have a honeycomb yoke, ch throttle quadrant and also sometimes use logitec extreame joystick and xbox controller. After installing the latest fsuipc paid version I cannot calibrate some of my levers on my throttle quadrant. I scan and select the lever I want then chose to send direct to fsuipc for the spoilers and flaps but when I try to calibrate the number do not move as they did before I upgraded. At first I had trouble with fsuipc even recognizing the different controllers but after I uninstalled fsuipc completely and even removed all of my profiles that seemed to be corrected but the calibration issue has be baffled. I have been calibrating my planes with fsuipc now for over 5 years all the way from fsx, p3d v 3 to p3d v4.5 and this is the first time I have had an issue that I cant seem to trouble shoot. I have been working with this for about 6 or 7 hours and think I could use some advice as to what I am doing or not doing that could cause this issue. I forgot to add that everything I fly is a paid addon plane again thank you in advance for anything that you can suggest to fix my problem Gene InstallFSUIPC6.log FSUIPC6.JoyScan.csv FSUIPC6.ini
  7. Greetings, I have checked and verified that I am downloading the correct version for feelthere sp3 I was told by navigraph that my path was wrong so I have changed it but so far the results are the same. I am still communicating with navigraph
  8. Greetings, Thank you for the links to the manuals I just missed that on the product page. As to running the installer I do run it as admin as I do with all my exe files. The problem is that when I check the Nd folder I have the cycle info text file as well as cycle.json and nd.db3 files but when I load the plane it says the active airac is 1 June-30 June 19 Thanks again Gene
  9. Greetings, I have installed the latest version (sp3) of the E175/195 and E170/190 jets. I have two problems. One I am not able to update the airac cycle no matter what I try. I have used the Navigraph FMS Manager and have also tried to download and install manually and have no results. I am using P3D v4.5 and installed the planes in the P3D add on folder. The second problem I can not find any manuals that would have the performance charts to get the take off and landing V-speeds I would appreciate any help you can provide. Gene
  10. Greetings, I am trying to figure out if the overhead buttons are on or off if the button is lit up Thanks Gene
  11. Greetings, Thank you for you help and advice I will see if I can find out about mouse macros from the manual. I appreciate the help. Gene
  12. Greetings, I have a registered version of fsuicp that I have been using for a long time. I have a Logitech Extreme 3D Pro Joystick that I use. I use FSX Gold edition. My main two planes that I fly are the iFly 737ng and the feelthere E175. All of the buttons for the iFly work as I have them assigned but the E175 is a different story. I have the buttons set for the same functions in each plane but the button for the Spoilers Toggle, Taxi Lights Toggle and Landing Lights Toggle will not function for the E175 but as I stated before function just fine for the ifly 737. I would appreciate any suggestions as to what my be the problem as I more than likely have not set up something correctly but do not know what it might be. I am attaching the latest log file that I have in my folder. Gene Miller FSUIPC4.log
  13. Thanks for the response I will looking for a solution elsewhere. Gene
  14. Greetings, I have a question about the E-jet planes and their installation. Just recently after making a couple of test flights in the E-175 when I start up my FSX which is the Gold edition with acceleration I am getting an error message that says there is a third party software that may be causing a problem. They say it is FSCopilot for FSX V1.7.0.0 File Modules\FSCopilot.dll The only add on that I have besides the E-jets is FSUICP paid version. So my question would be does E-jet use a part of the FSCopilot software in there aircraft package and if so would uninstalling and reinstalling the aircraft fix my error? If not then I will look else where for a solution. Thank you for you time and any suggestions you may have. Gene Miller
  15. Greetings, Found the problem as I suspected it was something I had done. Hope I did not waste any one's time. Gene
  16. Greetings, I have just recently purchased the Embraer 175/195 package and I am really excited about getting to know all of the systems and things that this plane can do. I have read the manual from start to finish and I am sure there are many things I have missed. The one thing I am wondering is that can you control all of the flight functions (Elevators, Ailerons, and Rudder) through FSUICP? I made the sample flight following the manual's step by step instructions and used the flight controls of FSX. When I went to set up a profile for the 175/195 on FSUICP I was not getting any response from the plane that is the reason for asking. Other than that I really enjoy setting up the FMC and all that goes with it as well as the nice easy to read pop up gages. You don't know what that means to an old man with bifocals. LOL If anyone can shed some light on the FSUICP setup for this plane I would appreciate it. Thank you for you help. Gene. PS: I returned the Eaglesoft Citation X V2 for the simple reason I could not read any of the gauges or messages on the FMC, or other gages.
  17. Greetings & Salutations: Pete I want to thank you for you help this morning and also want to apologize for wasting some of your time. As I said I am very new to both your program as well as FSX and as I was following your suggestions I discovered a mistake that I made that has me very embarrassed. As I said the controls worked perfectly when I preformed a free flight and then I selected the mission that I was having difficulties with and low and behold after I read for I would guess the 10th or 15th time I seen the mission starts with the aircraft on autopilot and it was up to me to disengage and when I did all this were working properly. I am so sorry for jumping the gun and posting here and I really appreciate your help. Gene
  18. Thank you for the quick reply. I will do the tests as you requested. It may be later today as I usually do not have time to do any flight sim until in the evenings. Again thank you for your response and I will post the info as soon as I have it available. Gene
  19. Greetings & Salutations: I have done a lot of reading on this forum as well as the Flightsim forum about FSUIPC and that made me decide to get the paid version. I then did the install and found all the documents and printed out the user manual and spent a lot of time reading before I started to make use of the program. I have set up several aircraft profiles and had success using them in the Free Flight portion of FSX however if I try to fly a FSX mission it seems that I can not control the aircraft. This does not apply to every aircraft and to every mission. The one I seem to be having trouble with at the moment is the Boeing 747-400 and flying the "Monsoon Approach" mission in FSX. I even deleted all of my aircraft profiles and went into Free Flight and did a complete new profile setup for the 747-400 and again had complete control of the aircraft but when I went to the FSX mission only the button controls worked but none of the axis controls, ie elevator, aileron, rudder and throttle would respond. Maybe someone could point me in the proper direction as to how to correct this. Thank you for your help in advance it is much appreciated. Gene Miller
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use. Guidelines Privacy Policy We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.