-
Posts
39 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Downloads
Posts posted by Thomas Greer
-
-
Just now, Winglet said:
Hello Thomas,
Yes, from what I can see in that picture, the speed brakes should be deployed.
In any case, had the system inhibited the speedbrake deployment for any of the reasons stated in my previous message, you should get the EICAS message "SPDBRE LEVER DISAG". This is neither shown here, so I don't know what's going on. It doesn't look right.
Best regards,
Marcos.
Yep. Something is clearly not working as it should.
-
On 4/24/2020 at 5:05 PM, Winglet said:
Hello,
Sorry for posting since I don't own the product yet but I have been reading around to get an idea about it before buying. However, I'd like to add some information about this.
In the real aircraft, the speedbrakes are automatically retracted in flight when:
- Flaps 2 or more are selected.
- Speed is 180 kt or less.
- Thrust lever angle (TLA) is 70º or more.Therefore, in the real E170/190, you can have the speedbrakes fully deployed with Flaps 1, even with thrust way above idle, as long as you are flying at more than 180 kts.
When automatically deployed, the EICAS advisory message will be shown: SPDBRK LEVER DISAG.
In direct mode, speed brakes are not available.
I don't know if there is any version of the aircraft in which this is different, or that it would change that behaviour with another EPIC load, but I would strongly doubt it... ¿?
Best regards,
Marcos.
Is this current config incorrect?
-
Just bought the Ejets V3 and I am quite disappointed that are a few bugs, and things that just arent implemented for some odd reason.
First one is that my speedbrakes wont deploy in the air at all, only after landing and reverse thrust is engaged. This makes slowing down quite difficult.
Another thing is that the speed of the MCP dials is really too slow, especially when flying online and having to comply with ATC instructions and do other things at the same time. Having to dial up to cruise altitude or adjust heading by 90 or more degrees can take some time.
I am also left wondering why the lighting of the flightdeck has been neglected, through daytime lighting, dynamic lighting, panel resolutions. It really depletes the immersion factor, for something that even freeware developers are able to introduce. Seems like if was a half-hearted effort to get an older jet compliant with a new sim.
The exterior model however is quite nice, and the systems seem to be modelled to a decent level which is good. A few things are missing about this jet which could just finish off the product.
-
-
JoyIDs still show them both as 1 and 2.
-
Sorry Pete for the delayed response. My PC took a funny turn and I couldn't start P3D. All seems good now. Here is the log.
********* FSUIPC4, Version 4.947i by Pete Dowson *********Reading options from "J:\P3D\Modules\FSUIPC4.ini"Running inside Prepar3D v3 on Windows 8.0Module base=5A350000User Name="Thomas Greer"User Addr="greerthomas@me.com"FSUIPC4 Key is providedWIDEFS7 not user registered, or expired515 System time = 05/11/2015 18:18:08515 FLT path = "C:\Users\user\Documents\Prepar3D v3 Files\"515 Trying J:\P3D\Modules\SimConnectP3D2.dll578 Found it: trying to connect594 FS path = "J:\P3D\"750 #### Initialising Dlrectinput Axis Scanning ...765 Trying: "HKCU\SYSTEM\CurrentControlSet\Control\MediaProperties\PrivateProperties\DirectInput\VID_06A3&PID_0763\Calibration\0"765 Found correct joystick Id 0765 ... and a "GUID" value781 ... okay, Acquired device as #0797 Trying: "HKCU\SYSTEM\CurrentControlSet\Control\MediaProperties\PrivateProperties\DirectInput\VID_06A3&PID_0BAC\Calibration\0"797 Found correct joystick Id 1797 ... and a "GUID" value797 ... okay, Acquired device as #1797 Trying: "HKCU\SYSTEM\CurrentControlSet\Control\MediaProperties\PrivateProperties\DirectInput\VID_0461&PID_4E25\Calibration\0"797 Found correct joystick Id 2797 ... and a "GUID" value797 ... okay, Acquired device as #2812 Trying: "HKCU\SYSTEM\CurrentControlSet\Control\MediaProperties\PrivateProperties\DirectInput\VID_0461&PID_4E25\Calibration\0"812 Trying: "HKCU\SYSTEM\CurrentControlSet\Control\MediaProperties\PrivateProperties\DirectInput\VID_0461&PID_4E25\Calibration\1"812 Trying: "HKCU\SYSTEM\CurrentControlSet\Control\MediaProperties\PrivateProperties\DirectInput\VID_0461&PID_4E25\Calibration\2"812 Found correct joystick Id 3812 ... and a "GUID" value812 ... okay, Acquired device as #3844 Trying: "HKCU\SYSTEM\CurrentControlSet\Control\MediaProperties\PrivateProperties\DirectInput\VID_0461&PID_4E25\Calibration\0"844 Trying: "HKCU\SYSTEM\CurrentControlSet\Control\MediaProperties\PrivateProperties\DirectInput\VID_0461&PID_4E25\Calibration\1"844 Found correct joystick Id 4844 ... and a "GUID" value844 ... okay, Acquired device as #4922 ---------------------- Joystick Device Scan -----------------------922 Checking: \\?\hid#vid_0461&pid_4e25&mi_01&col04#8&b8180dc&0&0003#{4d1e55b2-f16f-11cf-88cb-001111000030}922 Checking: \\?\hid#saitekkeyboard#2&1e0e23ca&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}922 Checking: \\?\hid#saitekmouse#2&7354a6f&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}922 Checking: \\?\hid#vid_1b1c&pid_0a06&mi_03#8&1656656c&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}922 Checking: \\?\hid#vid_0461&pid_4e25&mi_01&col01#8&b8180dc&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}922 Checking: \\?\hid#vid_0461&pid_4e25&mi_02#8&1855bce6&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}922 Checking: \\?\hid#vid_0461&pid_4e25&mi_01&col02#8&b8180dc&0&0001#{4d1e55b2-f16f-11cf-88cb-001111000030}922 Checking: \\?\hid#vid_06a3&pid_0763#7&fa88d7b&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}922 Product= Saitek Pro Flight Rudder Pedals922 Manufacturer= Saitek922 Vendor=06A3, Product=0763 (Version 1.1)922 Serial Number= Saitek922 Checking: \\?\hid#vid_0461&pid_4e25&mi_00#8&2f58be9e&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}922 Checking: \\?\hid#vid_06a3&pid_0bac#8&2cdfde68&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}922 Product= Saitek Pro Flight Yoke922 Manufacturer= Saitek922 Vendor=06A3, Product=0BAC (Version 3.4)922 Serial Number= Saitek922 Checking: \\?\hid#vid_0461&pid_4e25&mi_01&col03#8&b8180dc&0&0002#{4d1e55b2-f16f-11cf-88cb-001111000030}922 Product= HP Wireless Keyboard Kit922 Manufacturer= Hewlett Packard922 Vendor=0461, Product=4E25 (Version 1.50)922 Serial Number= Hewlett Packard922 Checking: \\?\hid#saitekhotkeys#2&15d37534&1&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}922 Checking: \\?\hid#vid_062a&pid_3286&mi_00#8&3304aab0&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}922 Checking: \\?\hid#vid_062a&pid_3286&mi_01&col01#8&31ee8380&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}922 Checking: \\?\hid#vid_062a&pid_3286&mi_01&col02#8&31ee8380&0&0001#{4d1e55b2-f16f-11cf-88cb-001111000030}922 Checking: \\?\hid#vid_062a&pid_3286&mi_01&col03#8&31ee8380&0&0002#{4d1e55b2-f16f-11cf-88cb-001111000030}922 Checking: \\?\hid#vid_062a&pid_3286&mi_01&col04#8&31ee8380&0&0003#{4d1e55b2-f16f-11cf-88cb-001111000030}922 -------------------------------------------------------------------922 #### Completed Dlrectinput Axis Scanning922 ---------- Making INI JoyNames Section ----------922 Joy#0: finding name in "HKCU\SYSTEM\CurrentControlSet\Control\MediaProperties\PrivateProperties\Joystick\OEM\VID_06A3&PID_0763\"922 Joy#0: OEMName = "Saitek Pro Flight Rudder Pedals"922 Joy#0: GUID = {1D58BA90-7763-11E5-8006-444553540000}922 Joy#1: finding name in "HKCU\SYSTEM\CurrentControlSet\Control\MediaProperties\PrivateProperties\Joystick\OEM\VID_06A3&PID_0BAC\"922 Joy#1: OEMName = "Saitek Pro Flight Yoke"922 Joy#1: GUID = {BFA06680-7A2F-11E5-8001-444553540000}922 Joy#2: finding name in "HKCU\SYSTEM\CurrentControlSet\Control\MediaProperties\PrivateProperties\Joystick\OEM\VID_0461&PID_4E25\"922 Joy#2: OEMName = "HP Wireless Keyboard Kit"922 Joy#2: GUID = {1D5670A0-7763-11E5-8001-444553540000}922 Joy#3: finding name in "HKCU\SYSTEM\CurrentControlSet\Control\MediaProperties\PrivateProperties\Joystick\OEM\VID_0461&PID_4E25\"922 Joy#3: OEMName = "HP Wireless Keyboard Kit"922 Joy#3: GUID = {1D581E50-7763-11E5-8003-444553540000}922 Joy#4: finding name in "HKCU\SYSTEM\CurrentControlSet\Control\MediaProperties\PrivateProperties\Joystick\OEM\VID_0461&PID_4E25\"922 Joy#4: OEMName = "HP Wireless Keyboard Kit"922 Joy#4: GUID = {1D581E50-7763-11E5-8002-444553540000}922 -------------------------------------------------937 LogOptions=00000000 02000011937 -------------------------------------------------------------------937 ------ Setting the hooks and direct calls into the simulator ------937 --- CONTROLS timer memory location obtained ok937 --- SIM1 Frictions access gained937 --- FS Controls Table located ok937 --- Installed Mouse Macro hooks ok.937 --- Wind smoothing fix is installed937 --- All links okay (except older global weather setting method)937 -------------------------------------------------------------------937 SimConnect_Open succeeded: waiting to check version okay937 Trying to use SimConnect Prepar3D1578 Ready Flags: Ready-To-Fly=N, In Menu=N, In Dlg=N2640 Memory in use: 652Mb, Avail=3444Mb61703 Running in "Lockheed Martin® Prepar3D® v3", Version: 3.0.3.0 (SimConnect: 3.0.0.0)61703 Initialising SimConnect data requests now61703 FSUIPC Menu entry added61719 Ready Flags: Ready-To-Fly=N, In Menu=Y, In Dlg=Y61719 C:\Users\user\AppData\Local\Lockheed Martin\Prepar3D v3\Prepar3D_Default.fxml61719 J:\P3D\SimObjects\Airplanes\IRIS Raptor Driver\Raptor.air71781 Memory in use: 1081Mb, Avail=3015Mb132156 Memory in use: 1064Mb, Avail=3032Mb208109 === NOTE: not calling SimConnect_Close ...209125 System time = 05/11/2015 18:21:37209125 *** FSUIPC log file being closedMinimum frame rate was 32768.0 fps, Maximum was 0.0 fpsMinimum available memory recorded was 32768MbMemory managed: 4 Allocs, 4 Freed********* FSUIPC Log file closed *********** -
Seems to work flawlessly. Do you mind if i give this to my friend to test?
-
Right, Im back.
-
I have just nipped out, will try that ASAP.
-
So that should fix the issue permanently? It seems to still work well!
-
Great. No problem. Id be happy to help.
-
Ok. Should I uninstall now?
-
********* FSUIPC4, Version 4.947h by Pete Dowson *********Reading options from "J:\P3D\Modules\FSUIPC4.ini"Running inside Prepar3D v3 on Windows 8.0Module base=50EB0000User Name="Thomas Greer"User Addr="greerthomas@me.com"FSUIPC4 Key is providedWIDEFS7 not user registered, or expired0 System time = 31/10/2015 14:18:040 FLT path = "C:\Users\user\Documents\Prepar3D v3 Files\"0 Trying J:\P3D\Modules\SimConnectP3D2.dll0 Found it: trying to connect16 FS path = "J:\P3D\"141 #### Initialising Dlrectinput Axis Scanning ...156 Trying: "HKCU\SYSTEM\CurrentControlSet\Control\MediaProperties\PrivateProperties\DirectInput\VID_0461&PID_4E25\Calibration\0"156 Trying: "HKCU\SYSTEM\CurrentControlSet\Control\MediaProperties\PrivateProperties\DirectInput\VID_0461&PID_4E25\Calibration\1"156 Trying: "HKCU\SYSTEM\CurrentControlSet\Control\MediaProperties\PrivateProperties\DirectInput\VID_0461&PID_4E25\Calibration\2"156 Found correct joystick Id 0156 ... and a "GUID" value156 ... okay, Acquired device as #0172 Trying: "HKCU\SYSTEM\CurrentControlSet\Control\MediaProperties\PrivateProperties\DirectInput\VID_0461&PID_4E25\Calibration\0"172 Trying: "HKCU\SYSTEM\CurrentControlSet\Control\MediaProperties\PrivateProperties\DirectInput\VID_0461&PID_4E25\Calibration\1"172 Found correct joystick Id 1172 ... and a "GUID" value172 ... okay, Acquired device as #1172 Trying: "HKCU\SYSTEM\CurrentControlSet\Control\MediaProperties\PrivateProperties\DirectInput\VID_0461&PID_4E25\Calibration\0"172 Found correct joystick Id 2172 ... and a "GUID" value172 ... okay, Acquired device as #2172 Trying: "HKCU\SYSTEM\CurrentControlSet\Control\MediaProperties\PrivateProperties\DirectInput\VID_06A3&PID_0763\Calibration\0"172 Found correct joystick Id 3172 ... and a "GUID" value172 ... okay, Acquired device as #3172 Trying: "HKCU\SYSTEM\CurrentControlSet\Control\MediaProperties\PrivateProperties\DirectInput\VID_06A3&PID_0BAC\Calibration\0"172 Found correct joystick Id 4172 ... and a "GUID" value172 ... okay, Acquired device as #4172 ---------------------- Joystick Device Scan -----------------------172 Checking: \\?\hid#vid_0461&pid_4e25&mi_01&col04#8&b8180dc&0&0003#{4d1e55b2-f16f-11cf-88cb-001111000030}172 Checking: \\?\hid#saitekkeyboard#2&1e0e23ca&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}172 Checking: \\?\hid#saitekmouse#2&7354a6f&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}172 Checking: \\?\hid#vid_1b1c&pid_0a06&mi_03#8&1656656c&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}172 Checking: \\?\hid#vid_0461&pid_4e25&mi_01&col01#8&b8180dc&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}172 Checking: \\?\hid#vid_0461&pid_4e25&mi_02#8&1855bce6&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}172 Checking: \\?\hid#vid_0461&pid_4e25&mi_01&col02#8&b8180dc&0&0001#{4d1e55b2-f16f-11cf-88cb-001111000030}172 Checking: \\?\hid#vid_06a3&pid_0763#7&fa88d7b&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}187 Product= Saitek Pro Flight Rudder Pedals187 Manufacturer= Saitek187 Vendor=06A3, Product=0763 (Version 1.1)187 Serial Number= Saitek187 Checking: \\?\hid#vid_0461&pid_4e25&mi_00#8&2f58be9e&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}187 Checking: \\?\hid#vid_06a3&pid_0bac#8&2cdfde68&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}187 Product= Saitek Pro Flight Yoke187 Manufacturer= Saitek187 Vendor=06A3, Product=0BAC (Version 3.4)187 Serial Number= Saitek187 Checking: \\?\hid#vid_0461&pid_4e25&mi_01&col03#8&b8180dc&0&0002#{4d1e55b2-f16f-11cf-88cb-001111000030}187 Product= HP Wireless Keyboard Kit187 Manufacturer= Hewlett Packard187 Vendor=0461, Product=4E25 (Version 1.50)187 Serial Number= Hewlett Packard187 Checking: \\?\hid#saitekhotkeys#2&15d37534&1&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}187 -------------------------------------------------------------------187 #### Completed Dlrectinput Axis Scanning187 ---------- Making INI JoyNames Section ----------187 Joy#0: finding name in "HKCU\SYSTEM\CurrentControlSet\Control\MediaProperties\PrivateProperties\Joystick\OEM\VID_0461&PID_4E25\"187 Joy #0 OEMName = "HP Wireless Keyboard Kit"187 Joy #0 GUID = {1D581E50-7763-11E5-8003-444553540000}187 Joy#1: finding name in "HKCU\SYSTEM\CurrentControlSet\Control\MediaProperties\PrivateProperties\Joystick\OEM\VID_0461&PID_4E25\"187 Joy #1 OEMName = "HP Wireless Keyboard Kit"187 Joy #1 GUID = {1D581E50-7763-11E5-8002-444553540000}187 Joy#2: finding name in "HKCU\SYSTEM\CurrentControlSet\Control\MediaProperties\PrivateProperties\Joystick\OEM\VID_0461&PID_4E25\"187 Joy #2 OEMName = "HP Wireless Keyboard Kit"187 Joy #2 GUID = {1D5670A0-7763-11E5-8001-444553540000}187 Joy#3: finding name in "HKCU\SYSTEM\CurrentControlSet\Control\MediaProperties\PrivateProperties\Joystick\OEM\VID_06A3&PID_0763\"187 Joy #3 OEMName = "Saitek Pro Flight Rudder Pedals"187 Joy #3 GUID = {1D58BA90-7763-11E5-8006-444553540000}187 Joy#4: finding name in "HKCU\SYSTEM\CurrentControlSet\Control\MediaProperties\PrivateProperties\Joystick\OEM\VID_06A3&PID_0BAC\"187 Joy #4 OEMName = "Saitek Pro Flight Yoke"187 Joy #4 GUID = {BFA06680-7A2F-11E5-8001-444553540000}187 -------------------------------------------------203 LogOptions=00000000 02000011203 -------------------------------------------------------------------203 ------ Setting the hooks and direct calls into the simulator ------203 --- CONTROLS timer memory location obtained ok203 --- SIM1 Frictions access gained203 --- FS Controls Table located ok203 --- Installed Mouse Macro hooks ok.203 --- Wind smoothing fix is installed203 --- All links okay (except older global weather setting method)203 -------------------------------------------------------------------203 SimConnect_Open succeeded: waiting to check version okay203 Trying to use SimConnect Prepar3D531 Ready Flags: Ready-To-Fly=N, In Menu=N, In Dlg=N1750 Memory in use: 616Mb, Avail=3480Mb39469 Running in "Lockheed Martin® Prepar3D® v3", Version: 3.0.3.0 (SimConnect: 3.0.0.0)39469 Initialising SimConnect data requests now39469 FSUIPC Menu entry added39469 Ready Flags: Ready-To-Fly=N, In Menu=Y, In Dlg=Y39469 C:\Users\user\AppData\Local\Lockheed Martin\Prepar3D v3\Prepar3D_Default.fxml39469 J:\P3D\SimObjects\Airplanes\IRIS Raptor Driver\Raptor.air69641 Memory in use: 1042Mb, Avail=3053Mb130047 Memory in use: 1039Mb, Avail=3056Mb190406 Memory in use: 1040Mb, Avail=3056Mb250781 Memory in use: 1040Mb, Avail=3056Mb
-
[General]Debug=PleaseLogExtras=x200000UpdatedByVersion=4947hHistory=BN4VZQLKKTYA8RA5H82NHInitDelayDevicesToo=NoNewInterceptTextMenu=NoUseSystemTime=NoUseMidMouseBtn=YesMouseWheelMove=NoMouseWheelTrim=NoMouseWheelTrimSpeed=1JoystickTimeout=20PollGFTQ6=YesBlankDisplays=NoFixControlAccel=NoFixMachSpeedBug=NoDeleteVehiclesForAES=YesAutoScanDevices=YesVisibilityOptions=NoOneCloudLayer=NoCloudTurbulence=NoCloudIcing=NoGenerateCirrus=NoSuppressCloudTurbulence=NoMaxIce=-4MinIce=-4UpperWindGusts=NoSuppressWindTurbulence=NoSuppressWindVariance=NoWindTurbulence=NoTurbulenceRate=1.0,5.0TurbulenceDivisor=20,20,40,40SuppressAllGusts=NoMaxSurfaceWind=0WindLimitLevel=200WindDiscardLevel=400WindAjustAltitude=NoWindAjustAltitudeBy=2000SmoothBySimTime=NoWindSmoothing=NoWindSmoothness=2WindSmoothAirborneOnly=YesPressureSmoothness=0TemperatureSmoothness=0DisconnTrimForAP=NoZeroElevForAPAlt=NoThrottleSyncAll=NoWhiteMessages=NoShowPMcontrols=NoSpoilerIncrement=512MagicBattery=NoRudderSpikeRemoval=NoElevatorSpikeRemoval=NoAileronSpikeRemoval=NoReversedElevatorTrim=NoClockSync=NoClockSyncMins=5ClearWeatherDynamics=NoOwnWeatherChanges=NoTimeForSelect=4LoadFlightMenu=NoLoadPlanMenu=NoPauseAfterCrash=NoBrakeReleaseThreshold=75SaveDataWithFlights=NoZapSound=fireworkShortAircraftNameOk=SubstringUseProfiles=YesEnableMouseLook=NoDelayedMouseLookZoom=NoAxesWrongRange=NoTCASid=FlightTCASrange=40AxisCalibration=NoDirectAxesToCalibs=NoShowMultilineWindow=YesSuppressSingleline=NoSuppressMultilineFS=NoAxisIntercepts=NoDontResetAxes=NoInitDelay=0GetNearestAirports=NoOOMcheck=YesOOMcheckInterval=10WeatherReadFactor=2WeatherRewriteSeconds=1CustomWeatherModify=NoSimConnectStallTime=1InitialStallTime=10NormalStallTime=1LuaRerunDelay=66Console=NoAssignJoystickIDs=YesFSVersionUsed="Lockheed Martin® Prepar3D® v3",3.0.3.0SimConnectUsed=3.0.0.0[JoyNames]AutoAssignLetters=No0=HP Wireless Keyboard Kit0.GUID={1D581E50-7763-11E5-8003-444553540000}1=HP Wireless Keyboard Kit1.GUID={1D581E50-7763-11E5-8002-444553540000}2=HP Wireless Keyboard Kit2.GUID={1D5670A0-7763-11E5-8001-444553540000}3=Saitek Pro Flight Rudder Pedals3.GUID={1D58BA90-7763-11E5-8006-444553540000}4=Saitek Pro Flight Yoke4.GUID={BFA06680-7A2F-11E5-8001-444553540000}[Axes]PollInterval=10RangeRepeatRate=100=3X,256,D,7,0,0,01=3Y,256,D,8,0,0,02=3R,256,D,3,0,0,03=4X,256,D,1,0,0,04=4Y,256,D,2,0,0,05=4Z,256,D,4,0,0,0[buttons]PollInterval=25ButtonRepeat=20,10[AutoSave]Next=1Interval=60Files=10SaveOnGround=NoAutoSaveEnabled=No[GPSout]GPSoutEnabled=No[GPSout2]GPSoutEnabled=No[WideServer]WideFSenabled=Yes[sounds]Path=J:\P3D\Sound\Device1=Primary Sound DriverDevice2=Speakers / Headphones (IDT High Definition Audio CODEC)Device3=Digital Output (S/PDIF) (IDT High Definition Audio CODEC)Device4=Speakers (3- Raptor HS40)[JoystickCalibration]AllowSuppressForPFCquad=YesExcludeThrottleSet=YesExcludeMixtureSet=YesExcludePropPitchSet=YesSepRevsJetsOnly=NoApplyHeloTrim=NoUseAxisControlsForNRZ=NoFlapsSetControl=0FlapDetents=NoReverserControl=66292Reverser1Control=66422Reverser2Control=66425Reverser3Control=66428Reverser4Control=66431MaxThrottleForReverser=256AileronTrimControl=66731RudderTrimControl=66732CowlFlaps1Control=66162CowlFlaps2Control=66163CowlFlaps3Control=66164CowlFlaps4Control=66165SteeringTillerControl=0MaxSteerSpeed=60Aileron=-16380,0,0,16380/8SlopeAileron=6Elevator=-16380,0,0,16380/8SlopeElevator=6Rudder=-16380,0,0,16380/8Throttle=-16380,16380/8LeftBrake=-16380,16380/24RightBrake=-16380,16380/24
-
Oops. The posts didnt send. I thought I had sent the ini and log. here you go.
-
I love you!!
-
Roger, standby.
-
; log
********* FSUIPC4, Version 4.947h by Pete Dowson *********Reading options from "J:\P3D\Modules\FSUIPC4.ini"Running inside Prepar3D v3 on Windows 8.0Module base=57F30000User Name="Thomas Greer"User Addr="greerthomas@me.com"FSUIPC4 Key is providedWIDEFS7 not user registered, or expired0 System time = 31/10/2015 13:16:410 FLT path = "C:\Users\user\Documents\Prepar3D v3 Files\"0 Trying J:\P3D\Modules\SimConnectP3D2.dll0 Found it: trying to connect16 FS path = "J:\P3D\"157 #### Initialising Dlrectinput Axis Scanning ...157 Trying: "HKCU\SYSTEM\CurrentControlSet\Control\MediaProperties\PrivateProperties\DirectInput\VID_0461&PID_4E25\Calibration\0"157 Trying: "HKCU\SYSTEM\CurrentControlSet\Control\MediaProperties\PrivateProperties\DirectInput\VID_0461&PID_4E25\Calibration\1"157 Trying: "HKCU\SYSTEM\CurrentControlSet\Control\MediaProperties\PrivateProperties\DirectInput\VID_0461&PID_4E25\Calibration\2"157 Found correct joystick Id 0157 ... and a "GUID" value172 ... okay, Acquired device as #0172 Trying: "HKCU\SYSTEM\CurrentControlSet\Control\MediaProperties\PrivateProperties\DirectInput\VID_0461&PID_4E25\Calibration\0"172 Trying: "HKCU\SYSTEM\CurrentControlSet\Control\MediaProperties\PrivateProperties\DirectInput\VID_0461&PID_4E25\Calibration\1"172 Found correct joystick Id 1172 ... and a "GUID" value172 ... okay, Acquired device as #1188 Trying: "HKCU\SYSTEM\CurrentControlSet\Control\MediaProperties\PrivateProperties\DirectInput\VID_0461&PID_4E25\Calibration\0"188 Found correct joystick Id 2188 ... and a "GUID" value188 ... okay, Acquired device as #2188 ---------------------- Joystick Device Scan -----------------------188 Checking: \\?\hid#vid_0461&pid_4e25&mi_01&col04#8&b8180dc&0&0003#{4d1e55b2-f16f-11cf-88cb-001111000030}188 Checking: \\?\hid#saitekkeyboard#2&1e0e23ca&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}188 Checking: \\?\hid#saitekmouse#2&7354a6f&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}188 Checking: \\?\hid#vid_1b1c&pid_0a06&mi_03#8&1656656c&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}188 Checking: \\?\hid#vid_0461&pid_4e25&mi_01&col01#8&b8180dc&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}188 Checking: \\?\hid#vid_0461&pid_4e25&mi_02#8&1855bce6&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}188 Checking: \\?\hid#vid_0461&pid_4e25&mi_01&col02#8&b8180dc&0&0001#{4d1e55b2-f16f-11cf-88cb-001111000030}188 Checking: \\?\hid#vid_06a3&pid_0763#7&fa88d7b&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}188 Product= Saitek Pro Flight Rudder Pedals188 Manufacturer= Saitek188 Vendor=06A3, Product=0763 (Version 1.1)188 Serial Number= Saitek188 Trying: "HKCU\SYSTEM\CurrentControlSet\Control\MediaProperties\PrivateProperties\DirectInput\VID_06A3&PID_0763\Calibration\0"188 Using existing joystick id: 0188 Checking: \\?\hid#vid_0461&pid_4e25&mi_00#8&2f58be9e&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}188 Checking: \\?\hid#vid_06a3&pid_0bac#8&2cdfde68&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}188 Product= Saitek Pro Flight Yoke188 Manufacturer= Saitek188 Vendor=06A3, Product=0BAC (Version 3.4)188 Serial Number= Saitek188 Trying: "HKCU\SYSTEM\CurrentControlSet\Control\MediaProperties\PrivateProperties\DirectInput\VID_06A3&PID_0BAC\Calibration\0"188 Using existing joystick id: 1188 Checking: \\?\hid#vid_0461&pid_4e25&mi_01&col03#8&b8180dc&0&0002#{4d1e55b2-f16f-11cf-88cb-001111000030}188 Product= HP Wireless Keyboard Kit188 Manufacturer= Hewlett Packard188 Vendor=0461, Product=4E25 (Version 1.50)188 Serial Number= Hewlett Packard188 Checking: \\?\hid#saitekhotkeys#2&15d37534&1&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}188 -------------------------------------------------------------------188 #### Completed Dlrectinput Axis Scanning188 ---------- Making INI JoyNames Section ----------188 Joy#0: finding name in "HKCU\SYSTEM\CurrentControlSet\Control\MediaProperties\PrivateProperties\Joystick\OEM\VID_0461&PID_4E25\"188 Joy #0 OEMName = "HP Wireless Keyboard Kit"188 Joy #0 GUID = {1D581E50-7763-11E5-8003-444553540000}188 Joy#1: finding name in "HKCU\SYSTEM\CurrentControlSet\Control\MediaProperties\PrivateProperties\Joystick\OEM\VID_0461&PID_4E25\"188 Joy #1 OEMName = "HP Wireless Keyboard Kit"188 Joy #1 GUID = {1D581E50-7763-11E5-8002-444553540000}188 Joy#2: finding name in "HKCU\SYSTEM\CurrentControlSet\Control\MediaProperties\PrivateProperties\Joystick\OEM\VID_0461&PID_4E25\"188 Joy #2 OEMName = "HP Wireless Keyboard Kit"188 Joy #2 GUID = {1D5670A0-7763-11E5-8001-444553540000}188 -------------------------------------------------203 LogOptions=00000000 02000011203 -------------------------------------------------------------------203 ------ Setting the hooks and direct calls into the simulator ------203 --- CONTROLS timer memory location obtained ok203 --- SIM1 Frictions access gained203 --- FS Controls Table located ok203 --- Installed Mouse Macro hooks ok.203 --- Wind smoothing fix is installed203 --- All links okay (except older global weather setting method)203 -------------------------------------------------------------------203 SimConnect_Open succeeded: waiting to check version okay203 Trying to use SimConnect Prepar3D532 Ready Flags: Ready-To-Fly=N, In Menu=N, In Dlg=N1750 Memory in use: 617Mb, Avail=3479Mb39641 Running in "Lockheed Martin® Prepar3D® v3", Version: 3.0.3.0 (SimConnect: 3.0.0.0)39641 Initialising SimConnect data requests now39641 FSUIPC Menu entry added39657 Ready Flags: Ready-To-Fly=N, In Menu=Y, In Dlg=Y39657 C:\Users\user\AppData\Local\Lockheed Martin\Prepar3D v3\Prepar3D_Default.fxml39657 J:\P3D\SimObjects\Airplanes\IRIS Raptor Driver\Raptor.air69828 Memory in use: 987Mb, Avail=3108Mb83688 J:\P3D\SimObjects\Airplanes\PMDG 737-800NGX WL\B737-800WL.air98157 Ready Flags: Ready-To-Fly=N, In Menu=N, In Dlg=N98891 System time = 31/10/2015 13:18:20, Simulator time = 08:00:01 (13:00Z)98891 Aircraft="Boeing 737-86NNGX Smart Express"103688 Starting everything now ...103719 Ready Flags: Ready-To-Fly=Y, In Menu=N, In Dlg=N103782 ASN active function link set103782 Ready for ASN WX radar105032 Advanced Weather Interface Enabled119469 Ready Flags: Ready-To-Fly=Y, In Menu=Y, In Dlg=Y119469 Sim stopped: average frame rate for last 21 secs = 40.9 fps130657 Memory in use: 2141Mb, Avail=1954Mb174407 Ready Flags: Ready-To-Fly=Y, In Menu=N, In Dlg=N190938 Memory in use: 2162Mb, Avail=1934Mb221157 Ready Flags: Ready-To-Fly=Y, In Menu=Y, In Dlg=Y221157 Sim stopped: average frame rate for last 47 secs = 54.9 fps221782 Read joy 0, Buttons=x00000000, POV=-1221782 Axes: X=0,Y=0,Z=0,R=0,U=0,V=0221782 S=0,T=0,P=-1,Q=-1,M=-1,N=-1221782 *** JOY ERROR: The LPDIRECTINPUTDEVICE8 handle for Joy #3 is zero!221782 *** JOY ERROR: The LPDIRECTINPUTDEVICE8 handle for Joy #4 is zero!221782 *** JOY ERROR: The LPDIRECTINPUTDEVICE8 handle for Joy #5 is zero!221782 *** JOY ERROR: The LPDIRECTINPUTDEVICE8 handle for Joy #6 is zero!221782 *** JOY ERROR: The LPDIRECTINPUTDEVICE8 handle for Joy #7 is zero!221782 *** JOY ERROR: The LPDIRECTINPUTDEVICE8 handle for Joy #8 is zero!221782 *** JOY ERROR: The LPDIRECTINPUTDEVICE8 handle for Joy #9 is zero!221782 *** JOY ERROR: The LPDIRECTINPUTDEVICE8 handle for Joy #10 is zero!221782 *** JOY ERROR: The LPDIRECTINPUTDEVICE8 handle for Joy #11 is zero!221782 *** JOY ERROR: The LPDIRECTINPUTDEVICE8 handle for Joy #12 is zero!221782 *** JOY ERROR: The LPDIRECTINPUTDEVICE8 handle for Joy #13 is zero!221782 *** JOY ERROR: The LPDIRECTINPUTDEVICE8 handle for Joy #14 is zero!221782 *** JOY ERROR: The LPDIRECTINPUTDEVICE8 handle for Joy #15 is zero!228344 ---------- Making INI JoyNames Section ----------228344 Joy#0: finding name in "HKCU\SYSTEM\CurrentControlSet\Control\MediaProperties\PrivateProperties\Joystick\OEM\VID_0461&PID_4E25\"228344 Joy #0 OEMName = "HP Wireless Keyboard Kit"228344 Joy #0 GUID = {1D581E50-7763-11E5-8003-444553540000}228344 Joy#1: finding name in "HKCU\SYSTEM\CurrentControlSet\Control\MediaProperties\PrivateProperties\Joystick\OEM\VID_0461&PID_4E25\"228344 Joy #1 OEMName = "HP Wireless Keyboard Kit"228344 Joy #1 GUID = {1D581E50-7763-11E5-8002-444553540000}228344 Joy#2: finding name in "HKCU\SYSTEM\CurrentControlSet\Control\MediaProperties\PrivateProperties\Joystick\OEM\VID_0461&PID_4E25\"228344 Joy #2 OEMName = "HP Wireless Keyboard Kit"228344 Joy #2 GUID = {1D5670A0-7763-11E5-8001-444553540000}228344 -------------------------------------------------228688 Ready Flags: Ready-To-Fly=Y, In Menu=N, In Dlg=N229078 Ready Flags: Ready-To-Fly=Y, In Menu=Y, In Dlg=Y237422 Deactivated for PID=6896, "chrome.exe"259782 === NOTE: not calling SimConnect_Close ...260782 System time = 31/10/2015 13:21:02, Simulator time = 08:01:08 (13:01Z)260782 *** FSUIPC log file being closedMinimum frame rate was 38.3 fps, Maximum was 72.0 fpsMinimum available memory recorded was 1934MbAverage frame rate for running time of 68 secs = 50.5 fpsMemory managed: 35 Allocs, 35 Freed********* FSUIPC Log file closed *********** -
ini ;
[General]Debug=PleaseLogExtras=x200000UpdatedByVersion=4947hHistory=LP7K2SNN9V6EBUD8KB5QRInitDelayDevicesToo=NoNewInterceptTextMenu=NoUseSystemTime=NoUseMidMouseBtn=YesMouseWheelMove=NoMouseWheelTrim=NoMouseWheelTrimSpeed=1JoystickTimeout=20PollGFTQ6=YesBlankDisplays=NoFixControlAccel=NoFixMachSpeedBug=NoDeleteVehiclesForAES=YesAutoScanDevices=YesVisibilityOptions=NoOneCloudLayer=NoCloudTurbulence=NoCloudIcing=NoGenerateCirrus=NoSuppressCloudTurbulence=NoMaxIce=-4MinIce=-4UpperWindGusts=NoSuppressWindTurbulence=NoSuppressWindVariance=NoWindTurbulence=NoTurbulenceRate=1.0,5.0TurbulenceDivisor=20,20,40,40SuppressAllGusts=NoMaxSurfaceWind=0WindLimitLevel=200WindDiscardLevel=400WindAjustAltitude=NoWindAjustAltitudeBy=2000SmoothBySimTime=NoWindSmoothing=NoWindSmoothness=2WindSmoothAirborneOnly=YesPressureSmoothness=0TemperatureSmoothness=0DisconnTrimForAP=NoZeroElevForAPAlt=NoThrottleSyncAll=NoWhiteMessages=NoShowPMcontrols=NoSpoilerIncrement=512MagicBattery=NoRudderSpikeRemoval=NoElevatorSpikeRemoval=NoAileronSpikeRemoval=NoReversedElevatorTrim=NoClockSync=NoClockSyncMins=5ClearWeatherDynamics=NoOwnWeatherChanges=NoTimeForSelect=4LoadFlightMenu=NoLoadPlanMenu=NoPauseAfterCrash=NoBrakeReleaseThreshold=75SaveDataWithFlights=NoZapSound=fireworkShortAircraftNameOk=SubstringUseProfiles=YesEnableMouseLook=NoDelayedMouseLookZoom=NoAxesWrongRange=NoTCASid=FlightTCASrange=40AxisCalibration=NoDirectAxesToCalibs=NoShowMultilineWindow=YesSuppressSingleline=NoSuppressMultilineFS=NoAxisIntercepts=NoDontResetAxes=NoInitDelay=0GetNearestAirports=NoOOMcheck=YesOOMcheckInterval=10WeatherReadFactor=2WeatherRewriteSeconds=1CustomWeatherModify=NoSimConnectStallTime=1InitialStallTime=10NormalStallTime=1LuaRerunDelay=66Console=NoAssignJoystickIDs=YesFSVersionUsed="Lockheed Martin® Prepar3D® v3",3.0.3.0SimConnectUsed=3.0.0.0[JoyNames]AutoAssignLetters=No0=HP Wireless Keyboard Kit0.GUID={1D581E50-7763-11E5-8003-444553540000}1=HP Wireless Keyboard Kit1.GUID={1D581E50-7763-11E5-8002-444553540000}2=HP Wireless Keyboard Kit2.GUID={1D5670A0-7763-11E5-8001-444553540000}[Axes]PollInterval=10RangeRepeatRate=10[buttons]PollInterval=25ButtonRepeat=20,10[AutoSave]Next=1Interval=60Files=10SaveOnGround=NoAutoSaveEnabled=No[GPSout]GPSoutEnabled=No[GPSout2]GPSoutEnabled=No[WideServer]WideFSenabled=Yes[sounds]Path=J:\P3D\Sound\Device1=Primary Sound DriverDevice2=Speakers / Headphones (IDT High Definition Audio CODEC)Device3=Digital Output (S/PDIF) (IDT High Definition Audio CODEC)Device4=Speakers (3- Raptor HS40) -
Ah right. Sorry. Misunderstanding then. http://prntscr.com/8xf67q
-
No difference I'm afraid!
-
I tried JoyID and nothing changed.
Trying the new fsuipc now.
-
Roger. Im away to rugby just now, will get it done when I get back. I have asked my friend already but he hasnt got back to me yet.
-
And the ini file, [General]
Debug=PleaseLogExtras=x200000UpdatedByVersion=4947gHistory=3I07SLGGWOWAEC5ZB2WH3InitDelayDevicesToo=NoNewInterceptTextMenu=NoUseSystemTime=NoUseMidMouseBtn=YesMouseWheelMove=NoMouseWheelTrim=NoMouseWheelTrimSpeed=1JoystickTimeout=20PollGFTQ6=YesBlankDisplays=NoFixControlAccel=NoFixMachSpeedBug=NoDeleteVehiclesForAES=YesAutoScanDevices=YesVisibilityOptions=NoOneCloudLayer=NoCloudTurbulence=NoCloudIcing=NoGenerateCirrus=NoSuppressCloudTurbulence=NoMaxIce=-4MinIce=-4UpperWindGusts=NoSuppressWindTurbulence=NoSuppressWindVariance=NoWindTurbulence=NoTurbulenceRate=1.0,5.0TurbulenceDivisor=20,20,40,40SuppressAllGusts=NoMaxSurfaceWind=0WindLimitLevel=200WindDiscardLevel=400WindAjustAltitude=NoWindAjustAltitudeBy=2000SmoothBySimTime=NoWindSmoothing=NoWindSmoothness=2WindSmoothAirborneOnly=YesPressureSmoothness=0TemperatureSmoothness=0DisconnTrimForAP=NoZeroElevForAPAlt=NoThrottleSyncAll=NoWhiteMessages=NoShowPMcontrols=NoSpoilerIncrement=512MagicBattery=NoRudderSpikeRemoval=NoElevatorSpikeRemoval=NoAileronSpikeRemoval=NoReversedElevatorTrim=NoClockSync=NoClockSyncMins=5ClearWeatherDynamics=NoOwnWeatherChanges=NoTimeForSelect=4LoadFlightMenu=NoLoadPlanMenu=NoPauseAfterCrash=NoBrakeReleaseThreshold=75SaveDataWithFlights=NoZapSound=fireworkShortAircraftNameOk=SubstringUseProfiles=YesEnableMouseLook=NoDelayedMouseLookZoom=NoAxesWrongRange=NoTCASid=FlightTCASrange=40AxisCalibration=NoDirectAxesToCalibs=NoShowMultilineWindow=YesSuppressSingleline=NoSuppressMultilineFS=NoAxisIntercepts=NoDontResetAxes=NoInitDelay=0GetNearestAirports=NoOOMcheck=YesOOMcheckInterval=10WeatherReadFactor=2WeatherRewriteSeconds=1CustomWeatherModify=NoSimConnectStallTime=1InitialStallTime=10NormalStallTime=1LuaRerunDelay=66Console=NoFSVersionUsed="Lockheed Martin® Prepar3D® v3",3.0.3.0SimConnectUsed=3.0.0.0[JoyNames]AutoAssignLetters=No0=HP Wireless Keyboard Kit0.GUID={1D581E50-7763-11E5-8002-444553540000}1=HP Wireless Keyboard Kit1.GUID={1D5670A0-7763-11E5-8001-444553540000}2=HP Wireless Keyboard Kit2.GUID={1D581E50-7763-11E5-8003-444553540000}[Axes]PollInterval=10RangeRepeatRate=10[buttons]PollInterval=25ButtonRepeat=20,10[AutoSave]Next=1Interval=60Files=10SaveOnGround=NoAutoSaveEnabled=No[GPSout]GPSoutEnabled=No[GPSout2]GPSoutEnabled=No[WideServer]WideFSenabled=Yes[sounds]Path=J:\P3D\Sound\Device1=Primary Sound DriverDevice2=Speakers / Headphones (IDT High Definition Audio CODEC)Device3=Digital Output (S/PDIF) (IDT High Definition Audio CODEC)Device4=Speakers (3- Raptor HS40)
Speedbrakes wont deploy - and a few other things
in Airplanes
Posted
Feelthere wanna have a look?