I had FSX:SE installed for a while now, and have been using FSUIPC full reg version in it with no problems.
I recently installed P3D V2.5 and attempted to ran the FSUIPC installer again (NOT version n initially)
As expected it did not install the registration properly.
On the forum, I noted that another person had a similar issue and that the updated installer fixed it. However, I have downloaded the new installer and yet the problem of the registration not transferring to P3D still persists.
The key HAS copied to the modules directory of both programs.
Any help would be appreciated. Note I have tried installing with new registration and check old registration and it does not seem to work either way.
Installer for FSUIPC4.DLL version 4.939n
Looking in registry for FSX install path:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft Games\Flight Simulator\10.0
Parameter"SetupPath"
... >>> OK! FOUND FSX! <<< ...
SetupPath=D:\Program Files (x86)\Steam\steamapps\common\FSX
Looking in registry for FSX-SE install path:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft Games\Flight Simulator - Steam Edition\10.0
Parameter"SetupPath"
Not there, so looking in:
HKEY_CURRENT_USER\SOFTWARE\Microsoft\Microsoft Games\Flight Simulator - Steam Edition\10.0
Parameter"AppPath"
... NOT found! ...
Looking in registry for Prepar3D v1 install path:
HKEY_LOCAL_MACHINE\SOFTWARE\LockheedMartin\Prepar3D
Parameter"SetupPath"
Not there, so looking in:
HKEY_CURRENT_USER\SOFTWARE\LockheedMartin\Prepar3D
Parameter"AppPath"
... NOT found! ...
Looking in registry for Prepar3D v2 install path:
HKEY_LOCAL_MACHINE\SOFTWARE\Lockheed Martin\Prepar3D v2
Parameter"SetupPath"
... >>> OK! FOUND Prepar3D v2! <<< ...
SetupPath=D:\Lockheed Martin\Prepar3D v2\
===========================================================
INSTALLATION FOR FSX:
SetupPath="D:\Program Files (x86)\Steam\steamapps\common\FSX\"
Checking version of the FSX EXE:
... Version 10.0.62613.0 (Need at least 10.0.60905.0)
Checking compatibility with installed SimConnect:
Found SimConnect build 60905 (Original)
Found SimConnect build 62613 (Steam)
Found SimConnect build 61242 (SP1 May07)
Found SimConnect build 61259 (Acc/SP2 Oct07)
NOTE: This is actually FSX-SE masquerading as FSX-MS
Checking if there's already a version of FSUIPC4 installed in:
D:\Program Files (x86)\Steam\steamapps\common\FSX\Modules\FSUIPC4.DLL
... Version 4.939n found.
FSX-SE Modules folder already exists.
Okay -- installed FSUIPC4 into "D:\Program Files (x86)\Steam\steamapps\common\FSX\Modules\FSUIPC4.DLL"
Looking for the current user's Application Data path:
... found as "D:\Users\C-mattio\AppData\Roaming"
Now finding \Microsoft\FSX-SE\FSX_SE.CFG for all users, including this one
Looking in "D:\Users\C-mattio\AppData\Roaming"
... No FSX_SE.CFG there
Looking for the current user's Application Data path:
... found as "D:\Users\C-mattio\AppData\Roaming"
Now finding \Microsoft\FSX-SE\FSX.CFG for all users, including this one
Looking in "D:\Users\C-mattio\AppData\Roaming"
... No FSX.CFG there
Looking for the current user's Application Data path:
... found as "D:\Users\C-mattio\AppData\Roaming"
Now finding \Microsoft\FSX\FSX.CFG for all users, including this one
Looking in "D:\Users\C-mattio\AppData\Roaming"
Found FSX.CFG in "D:\Users\C-mattio\AppData\Roaming\Microsoft\FSX\FSX.CFG"
Now checking DLL.XML ...
... There is a previous DLL.XML, checking for FSUIPC4 section.
... FSUIPC4 section already exists but will be replaced.
(for FSUIPC4, without Loader)
... FSUIPC4 section of DLL.XML written okay
Now checking for a SimConnect.XML file ...
... No SimConnect.XML file found. This is okay.
"Modules\FSUIPC Documents" folder already exists.
Now installing additional files into the "Modules\FSUIPC Documents" folder:
Installed "FSUIPC4 User Guide.pdf" okay
Installed "FSUIPC4 for Advanced Users.pdf" okay
Installed "FSUIPC4 History.pdf" okay
Installed "List of FSX and P3D controls.pdf" okay
Installed "FSUIPC Lua Library.pdf" okay
Installed "FSUIPC Lua Plug-Ins.pdf" okay
Installed "Lua License.pdf" okay
Installed "Lua Plugins for VRInsight Devices.pdf" okay
Installed "LuaFileSystem.pdf" okay
Installed "Example LUA plugins.zip" okay
Installed "ASN WX Radar facilities in FSUIPC4.pdf" okay
Installed "Offset Mapping for PMDG 737NGX.pdf" okay
Installed "FSUIPC4 Offsets Status.pdf" okay
Installed "Profiles in Separate Files.pdf" okay
===========================================================
INSTALLATION FOR Prepar3D v2:
SetupPath="D:\Lockheed Martin\Prepar3D v2\"
Checking version of the Prepar3D v2 EXE:
... Version 2.5.12945.0 (Need at least 1.0.677.0)
Checking compatibility with installed SimConnect:
Checking if there's already a version of FSUIPC4 installed in:
D:\Lockheed Martin\Prepar3D v2\Modules\FSUIPC4.DLL
... Version 4.939n found.
Prepar3D v2 Modules folder already exists.
Okay -- installed FSUIPC4 into "D:\Lockheed Martin\Prepar3D v2\Modules\FSUIPC4.DLL"
Looking for the current user's Application Data path:
... found as "D:\Users\C-mattio\AppData\Roaming"
Now finding \Lockheed Martin\Prepar3D v2\Prepar3D.CFG for all users, including this one
Looking in "D:\Users\C-mattio\AppData\Roaming"
Found Prepar3D.CFG in "D:\Users\C-mattio\AppData\Roaming\Lockheed Martin\Prepar3D v2\Prepar3D.CFG"
Now checking DLL.XML ...
... There is a previous DLL.XML, checking for FSUIPC4 section.
... FSUIPC4 section already exists but will be replaced.
(for FSUIPC4, without Loader)
... FSUIPC4 section of DLL.XML written okay
Now checking for a SimConnect.XML file ...
... No SimConnect.XML file found. This is okay.
"Modules\FSUIPC Documents" folder already exists.
Now installing the Prepar3D SimConnect interface for FSUIPC4 into the "Modules" folder:
Installed "SimConnectP3D2.dll" okay
Now installing additional files into the "Modules\FSUIPC Documents" folder:
Installed "FSUIPC4 User Guide.pdf" okay
Installed "FSUIPC4 for Advanced Users.pdf" okay
Installed "FSUIPC4 History.pdf" okay
Installed "List of FSX and P3D controls.pdf" okay
Installed "FSUIPC Lua Library.pdf" okay
Installed "FSUIPC Lua Plug-Ins.pdf" okay
Installed "Lua License.pdf" okay
Installed "Lua Plugins for VRInsight Devices.pdf" okay
Installed "LuaFileSystem.pdf" okay
Installed "Example LUA plugins.zip" okay
Installed "ASN WX Radar facilities in FSUIPC4.pdf" okay
Installed "Offset Mapping for PMDG 737NGX.pdf" okay
Installed "FSUIPC4 Offsets Status.pdf" okay
Installed "Profiles in Separate Files.pdf" okay
===========================================================
All installer tasks completed.
Registration check for FSUIPC4 was successful! (result code 00)
*************** End of Install Log ***************
********* FSUIPC4, Version 4.939n by Pete Dowson *********
Reading options from "D:\Program Files (x86)\Steam\steamapps\common\FSX\Modules\FSUIPC4.ini"
Running inside FSX Steam Edition on Windows 7
Module base=59720000
User Name="Matthew Lee"
User Addr="c-mattio@hotmail.com"
FSUIPC4 Key is provided
WIDEFS7 not user registered, or expired
141 System time = 20/05/2015 17:38:27
141 FLT path = "D:\Users\C-mattio\Documents\Flight Simulator X Files\"
156 Trying to connect to SimConnect Steam ...
172 FS path = "D:\Program Files (x86)\Steam\steamapps\common\FSX\"
359 LogOptions=F0000000 0000001F
359 --- CONTROLS timer memory location obtained ok
359 --- SIM1 Frictions access gained
359 ASN active function link set
375 --- FS Controls Table located ok
375 --- Installed Mouse Macro hooks ok.
375 Wind smoothing may be by ASN, not FSUIPC, if it is running
375 Will switch smoothing action when ASN starts/stops
375 SimConnect_Open succeeded: waiting to check version okay
375 Trying to use SimConnect Steam
4618 Running in "Microsoft Flight Simulator X", Version: 10.0.62613.0 (SimConnect: 10.0.62613.0)
4618 Initialising SimConnect data requests now
4618 FSUIPC Menu entry added
4649 Ready Flags: Ready-To-Fly=N, In Menu=Y, In Dlg=Y
4649 D:\Users\C-mattio\Documents\Flight Simulator X Files\Default.FLT
4649 D:\Program Files (x86)\Steam\steamapps\common\FSX\SimObjects\Airplanes\B737_800\Boeing737-800.air
4696 Memory in use: 633Mb, Avail=3463Mb
4790 Monitor IPC:024C (S32) = 3545616
14836 Monitor IPC:024C (S32) = 3509176
22699 Weather Mode now = Theme
25007 Monitor IPC:024C (S32) = 3476996
34991 Monitor IPC:024C (S32) = 3473032
44211 D:\Program Files (x86)\Steam\steamapps\common\FSX\SimObjects\Airplanes\Aerosoft Airbus A319 CFM\A319.air
45662 Monitor IPC:024C (S32) = 3217448
46598 *** EVENT: Cntrl= 66514 (0x000103d2), Param= 0 (0x00000000) ATC_MENU_CLOSE
47940 *** AXIS: Cntrl= 66382 (0x0001034e), Param= -16383 (0xffffc001) AXIS_SPOILER_SET
47940 *** AXIS: Cntrl= 66382 (0x0001034e), Param= -16383 (0xffffc001) AXIS_SPOILER_SET
47940 *** AXIS: Cntrl= 66382 (0x0001034e), Param= -16383 (0xffffc001) AXIS_SPOILER_SET
47940 *** AXIS: Cntrl= 66382 (0x0001034e), Param= -16383 (0xffffc001) AXIS_SPOILER_SET
47940 *** AXIS: Cntrl= 66382 (0x0001034e), Param= -16383 (0xffffc001) AXIS_SPOILER_SET
47940 *** AXIS: Cntrl= 66382 (0x0001034e), Param= -16383 (0xffffc001) AXIS_SPOILER_SET
47940 *** AXIS: Cntrl= 66382 (0x0001034e), Param= -16383 (0xffffc001) AXIS_SPOILER_SET
47940 *** AXIS: Cntrl= 66382 (0x0001034e), Param= -16383 (0xffffc001) AXIS_SPOILER_SET
47940 *** AXIS: Cntrl= 66382 (0x0001034e), Param= -16383 (0xffffc001) AXIS_SPOILER_SET
47940 *** AXIS: Cntrl= 66382 (0x0001034e), Param= -16383 (0xffffc001) AXIS_SPOILER_SET
47940 *** AXIS: Cntrl= 66382 (0x0001034e), Param= -16383 (0xffffc001) AXIS_SPOILER_SET
47940 *** AXIS: Cntrl= 66382 (0x0001034e), Param= -16383 (0xffffc001) AXIS_SPOILER_SET
47940 *** AXIS: Cntrl= 66382 (0x0001034e), Param= -16383 (0xffffc001) AXIS_SPOILER_SET
47940 *** AXIS: Cntrl= 66382 (0x0001034e), Param= -16383 (0xffffc001) AXIS_SPOILER_SET
47940 *** AXIS: Cntrl= 66382 (0x0001034e), Param= -16383 (0xffffc001) AXIS_SPOILER_SET
47940 *** AXIS: Cntrl= 66382 (0x0001034e), Param= -16383 (0xffffc001) AXIS_SPOILER_SET
47940 *** AXIS: Cntrl= 66382 (0x0001034e), Param= -16383 (0xffffc001) AXIS_SPOILER_SET
47940 *** AXIS: Cntrl= 66382 (0x0001034e), Param= -16383 (0xffffc001) AXIS_SPOILER_SET
56520 *** AXIS: Cntrl= 66382 (0x0001034e), Param= -16383 (0xffffc001) AXIS_SPOILER_SET
56520 *** AXIS: Cntrl= 66382 (0x0001034e), Param= -16383 (0xffffc001) AXIS_SPOILER_SET
56520 *** AXIS: Cntrl= 66382 (0x0001034e), Param= -16383 (0xffffc001) AXIS_SPOILER_SET
56520 *** AXIS: Cntrl= 66382 (0x0001034e), Param= -16383 (0xffffc001) AXIS_SPOILER_SET
56520 *** AXIS: Cntrl= 66382 (0x0001034e), Param= -16383 (0xffffc001) AXIS_SPOILER_SET
56520 *** AXIS: Cntrl= 66382 (0x0001034e), Param= -16383 (0xffffc001) AXIS_SPOILER_SET
56520 *** AXIS: Cntrl= 66382 (0x0001034e), Param= -16383 (0xffffc001) AXIS_SPOILER_SET
56520 *** AXIS: Cntrl= 66382 (0x0001034e), Param= -16383 (0xffffc001) AXIS_SPOILER_SET
56520 *** AXIS: Cntrl= 66382 (0x0001034e), Param= -16383 (0xffffc001) AXIS_SPOILER_SET
56520 *** AXIS: Cntrl= 66382 (0x0001034e), Param= -16383 (0xffffc001) AXIS_SPOILER_SET
56520 *** AXIS: Cntrl= 66382 (0x0001034e), Param= -16383 (0xffffc001) AXIS_SPOILER_SET
56520 *** AXIS: Cntrl= 66382 (0x0001034e), Param= -16383 (0xffffc001) AXIS_SPOILER_SET
56691 *** AXIS: Cntrl= 66382 (0x0001034e), Param= -16383 (0xffffc001) AXIS_SPOILER_SET
56691 *** AXIS: Cntrl= 66382 (0x0001034e), Param= -16383 (0xffffc001) AXIS_SPOILER_SET
56691 *** AXIS: Cntrl= 66382 (0x0001034e), Param= -16383 (0xffffc001) AXIS_SPOILER_SET
56691 *** AXIS: Cntrl= 66382 (0x0001034e), Param= -16383 (0xffffc001) AXIS_SPOILER_SET
56691 *** AXIS: Cntrl= 66382 (0x0001034e), Param= -16383 (0xffffc001) AXIS_SPOILER_SET
56691 *** AXIS: Cntrl= 66382 (0x0001034e), Param= -16383 (0xffffc001) AXIS_SPOILER_SET
56691 *** AXIS: Cntrl= 66382 (0x0001034e), Param= -16383 (0xffffc001) AXIS_SPOILER_SET
56691 *** AXIS: Cntrl= 66382 (0x0001034e), Param= -16383 (0xffffc001) AXIS_SPOILER_SET
56691 *** AXIS: Cntrl= 66382 (0x0001034e), Param= -16383 (0xffffc001) AXIS_SPOILER_SET
56691 *** AXIS: Cntrl= 66382 (0x0001034e), Param= -16383 (0xffffc001) AXIS_SPOILER_SET
56691 *** AXIS: Cntrl= 66382 (0x0001034e), Param= -16383 (0xffffc001) AXIS_SPOILER_SET
56691 *** AXIS: Cntrl= 66382 (0x0001034e), Param= -16383 (0xffffc001) AXIS_SPOILER_SET
56691 *** AXIS: Cntrl= 66382 (0x0001034e), Param= -16383 (0xffffc001) AXIS_SPOILER_SET
56691 *** AXIS: Cntrl= 66382 (0x0001034e), Param= -16383 (0xffffc001) AXIS_SPOILER_SET
56691 *** AXIS: Cntrl= 66382 (0x0001034e), Param= -16383 (0xffffc001) AXIS_SPOILER_SET
56691 *** AXIS: Cntrl= 66382 (0x0001034e), Param= -16383 (0xffffc001) AXIS_SPOILER_SET
56691 *** AXIS: Cntrl= 66382 (0x0001034e), Param= -16383 (0xffffc001) AXIS_SPOILER_SET
56691 *** AXIS: Cntrl= 66382 (0x0001034e), Param= -16383 (0xffffc001) AXIS_SPOILER_SET
56816 *** AXIS: Cntrl= 66382 (0x0001034e), Param= -16383 (0xffffc001) AXIS_SPOILER_SET
56816 *** AXIS: Cntrl= 66382 (0x0001034e), Param= -16383 (0xffffc001) AXIS_SPOILER_SET
56816 Monitor IPC:024C (S32) = 2932112
56941 *** AXIS: Cntrl= 66382 (0x0001034e), Param= -16383 (0xffffc001) AXIS_SPOILER_SET
56941 *** AXIS: Cntrl= 66382 (0x0001034e), Param= -16383 (0xffffc001) AXIS_SPOILER_SET
56941 *** AXIS: Cntrl= 66382 (0x0001034e), Param= -16383 (0xffffc001) AXIS_SPOILER_SET
57019 *** AXIS: Cntrl= 66382 (0x0001034e), Param= -16383 (0xffffc001) AXIS_SPOILER_SET
57019 *** AXIS: Cntrl= 66382 (0x0001034e), Param= -16383 (0xffffc001) AXIS_SPOILER_SET
57019 Ready Flags: Ready-To-Fly=N, In Menu=N, In Dlg=N
57112 *** AXIS: Cntrl= 66382 (0x0001034e), Param= -16383 (0xffffc001) AXIS_SPOILER_SET
57112 *** AXIS: Cntrl= 66382 (0x0001034e), Param= -16383 (0xffffc001) AXIS_SPOILER_SET
57222 *** AXIS: Cntrl= 66382 (0x0001034e), Param= -16383 (0xffffc001) AXIS_SPOILER_SET
57300 *** AXIS: Cntrl= 66382 (0x0001034e), Param= -16383 (0xffffc001) AXIS_SPOILER_SET
57300 *** AXIS: Cntrl= 66382 (0x0001034e), Param= -16383 (0xffffc001) AXIS_SPOILER_SET
57378 *** AXIS: Cntrl= 66382 (0x0001034e), Param= -16383 (0xffffc001) AXIS_SPOILER_SET
57487 *** AXIS: Cntrl= 66382 (0x0001034e), Param= -16383 (0xffffc001) AXIS_SPOILER_SET
57487 *** AXIS: Cntrl= 66382 (0x0001034e), Param= -16383 (0xffffc001) AXIS_SPOILER_SET
********* FSUIPC4, Version 4.939n by Pete Dowson *********
Reading options from "D:\Lockheed Martin\Prepar3D v2\Modules\FSUIPC4.AFR-FriendlyD3D.exe.ini"
Running inside Prepar3D v2 on Windows 7
... Prepar3D has been renamed as "AFR-FriendlyD3D.exe"
Module base=59720000
User Name=""
User Addr=""
FSUIPC4 not user registered
WIDEFS7 not user registered, or expired
94 System time = 20/05/2015 17:06:35
94 FLT path = "D:\Users\C-mattio\Documents\Prepar3D v2 Files\"
94 Trying D:\Lockheed Martin\Prepar3D v2\Modules\SimConnectP3D2.dll
94 Found it: trying to connect
109 FS path = "D:\Lockheed Martin\Prepar3D v2\"
234 LogOptions=00000000 00000001
234 --- CONTROLS timer memory location obtained ok
234 --- SIM1 Frictions access gained
234 ASN active function link set
234 --- FS Controls Table located ok
234 --- Installed Mouse Macro hooks ok.
234 Wind smoothing may be by ASN, not FSUIPC, if it is running
234 Will switch smoothing action when ASN starts/stops
234 SimConnect_Open succeeded: waiting to check version okay
234 Trying to use SimConnect Prepar3D
29079 Running in "Lockheed Martin® Prepar3D® v2", Version: 2.5.12945.0 (SimConnect: 2.5.0.0)
29079 Initialising SimConnect data requests now
29079 FSUIPC Menu entry added
29094 D:\Users\C-mattio\Documents\Prepar3D v2 Files\Default.fxml
29094 D:\Lockheed Martin\Prepar3D v2\SimObjects\Airplanes\beech_baron_58\Beech_Baron_58.air
65021 D:\Lockheed Martin\Prepar3D v2\SimObjects\Airplanes\Aerosoft Airbus A319 IAE\A319IAE.air
117952 System time = 20/05/2015 17:08:33, Simulator time = 17:07:05 (16:07Z)
118920 Starting everything now ...
122554 Advanced Weather Interface Enabled
173816 Sim stopped: average frame rate for last 42 secs = 27.2 fps
456474 Sim stopped: average frame rate for last 275 secs = 29.2 fps
530591 Sim stopped: average frame rate for last 35 secs = 29.3 fps
759319 Sim stopped: average frame rate for last 214 secs = 21.6 fps
769943 System time = 20/05/2015 17:19:25, Simulator time = 17:07:24 (16:07Z)
769943 *** FSUIPC log file being closed
Minimum frame rate was 10.0 fps, Maximum was 30.5 fps
Minimum available memory recorded was 811Mb
Average frame rate for running time of 594 secs = 25.9 fps
Memory managed: 137 Allocs, 137 Freed
********* FSUIPC Log file closed ***********
I don't know if it is relevant, but I have noticed NotePad has oddly started to crash when opening the FSUIPC log file now, although it can be opened in Word. NotePad works in every other respect, it is just these files that cause it to crash on opening. This issue started after the P3D issue and is not solely related.
Cheers,
Matt