Jump to content
The simFlight Network Forums

Farrokh

Members
  • Posts

    11
  • Joined

  • Last visited

Everything posted by Farrokh

  1. hi - I've had the same issues and have switched to a gigabit network on all PC's/switch - this has made it much better.... I've noticed that the "mini pause" happened when there was a change of graphic data - ie, if I selected WXR or STA on the efis - anyway, the gigabit seems to have taken care of it - looks like a network card / setting thing... Farrokh.
  2. HI Peter Thanks for the reply - I was indeed looking for "stabilizer" and not "elevator" - found the offset, and will try it thanks again! FC
  3. Hi All - Is there an offset to inhibit/disable the stabilizer trim in FS or PM? I couldn't seem to find any in the lists - I'm trying to explore a failure scenario via PM INST for loss of elevator trim - I know there are inhibits for flaps. gear, etc - Any pointers would be great! thanks Farrokh.
  4. hi - yes, I'm in touch with PM - will check with FDS as well - thanks! FC
  5. HI Peter I'm haveing a strange (to me at least) problem with my PM MCP program. If I launch it from anything other than the actual program icon, it will not fire up the MCP hardware (FDS G1) - if i use run ready, or a shortcut, the program runs, but the mcp hardware remains dead - and I've run PMfilecheck and I'm getting this report: it shows me five connections to PCSIX - is this normal? PCSIX runs the PM CDU and has the NetDir - I've been having problems here too, with the MCP hardware freezing up occasionally - Thanks! Farrokh pmFileCheck Build 38 Opening Connections Local Path: C:\Documents and Settings\farrokh\Desktop\PMFileCheck Checking Computer and User Name Local Computer Name: PCONE Local User Name: farrokh FSUIPC/WideFS found! FS Version: FS2004 WideServer Version 6.7 WideClient Version 6.7 Flight Simulator Running Testing FS Framerate and Data Rate for 8 seconds FS Framerate Avg / Min / Max: 24.3 / 21.3 / 24.5 Data Rate: 390 Ticks 48.7 data sets / sec Read attempts: 390 with 48.7 data sets / sec OK - GC Detected GC Build 444 OK - FMC Detected (CDU or MCDU) FMC Build 385 OK - A/P Detected (MCP or FCU) A/P Build 414 Local DLL Files Found: pm.dll dated: 11/18/2006 3:38:25 PM Checking FS Path OK - Reported FS Path \\PCONE\D\Program Files\Microsoft Games\Flight Simulator 9\ Trying to access FS Path OK - Read access to FS Path OK - Read/Write access to FS Path OK - Read/Write access to FS Path Wide Server reports: 68609 Connected to computer "PCFIVE" running WideClient version 6.700 (skt=2176) TCP 68906 Connected to computer "PCFOUR" running WideClient version 6.700 (skt=2248) TCP 68906 Connected to computer "PCTWO" running WideClient version 6.700 (skt=2236) TCP 69859 Connected to computer "PCSIX" running WideClient version 6.700 (skt=2260) TCP 69969 Connected to computer "PCTHREE" running WideClient version 6.700 (skt=2272) TCP 110125 Connected to computer "PCSEVEN" running WideClient version 6.700 (skt=1388) TCP 456109 Connected to computer "PCSIX" running WideClient version 6.700 (skt=1404) TCP 647234 Connected to computer "PCSIX" running WideClient version 6.700 (skt=960) TCP 2722265 Connected to computer "PCSIX" running WideClient version 6.700 (skt=960) TCP 2962672 Connected to computer "PCSIX" running WideClient version 6.700 (skt=960) TCP Looking for NETDIR from CDU Reported NetDir is: \\pcsix\netdir\ Checking PMNETDIR Path (FMC Generated Path) Error reading files: 80 No Files found in NetDir Checking FSPLANS Path (To Load/Save FS Flightplans) OK - Read/Write access to FSPLANS Shared Folder 8 File(s) found in FSPLANS, last date is 1/20/2007 2:59:09 PM Closing Everything 1/20/2007 3:45:55 PM
  6. Hi Peter - now that's a pity - thanks for the quick reply anyway - will check on the phi forum if there's a way to fine tune via their s'ware - or something else - cheers, FC
  7. Hi Peter - I'm using Phidgets (8/8/8) cards to interface the pots on my cockpit - the pots are the original ones (one on each throttle, flaps, elevator) from the 747 shell I'm using, they work fine and the Phidgets software interfaces them with MSFS - however, the FSUIPC options menu/joystic calib window does not reflect the changing values when I move the pots - in effect, I can't use the options in fsuipc like the various response curvers, which are great for fine tuning - Does this mean that if I use Phidgets, these fsuipc goodies will be unavailable? Or have I not switched on something.. Cheers, Farrokh.
  8. Hi all - has anyone had any sucess in triggering Ready For Pushback's 747 200 systems from hardware? Cheers, Farrokh.
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use. Guidelines Privacy Policy We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.