DomYul

There should be an easy fix because it accepts it when typed out but if you say 'TAXIWAY MIKE ONE SIX" nothing. Also if I direct an aircraft to runway 26L and say VIA FOXTROT it doesn't understand the command but if I say "AT ECHO ONE ONE VIA FOXTROT" it recognizes FOXTROT. So only if directing it to an entry point before a via point. I am running into many of these and it's not a voice recognition issue because most commands work but certain ones never work and these are 2 examples. So there must be somewhere to change this. If anyone knows how to do it let me know! One other frustrating thing I am encountering is issuing a exit. On many occasions I get the response "Unable to land. The runway is too short" and then the aircraft either exits at that same exit point or a closer one?? So if landing on 27l and I direct to exit at N4 I will get the message and then it exits at that same exit or at N6 which is even a shorter landing! Not sure if you have encountered that. Thanks Dom

Here are 3 in the first few minutes of the game. Hope that helps. Also voice recognition for certain taxiways do not work. i.e. Call-sign, runway 27R at M16. The M16 is not recognized unless typed in. There are few I have encountered but this is one example of one that does not work ever. Is there a way I am able to adjust this in the programming? Thanks!!

This one is crazy. Scroll down for the best times...Enjoy Fyi...you will need to add FDX and UPS to Terminal_GA if you want cargo flights klax_schedule.txt

Hi Dick! I have been using schedule creator 24V1 for Tower 3D pro and it works great! My only question is that i don't get any Fedex or UPS flights. I added them to Terminal GA and now I see about 3 aircraft at the gates but they never seem to arrive or depart. I have even started the game at a time when there were about 9 lines of Fedex schedules listed and not one came up during the game. Was wondering if you have any suggestions? Thanks again! Dom Just as I post this a Fedex flight arrives! So looks like it finally recognized it! Funny enough the whole hour passed with no flights and when the second hour showed up in came in.

I find that if you follow Vic's instructions it works fine. The only problems I am encountering is recognition of certain taxiways. For example in KLAX if I state Hold Position at Taxiway Charlie 10, it does not recognize it. It tries to force a different taxiway. Only way to force it is to type it in. And it does this with various taxiways. Not sure if anyone has found a fix?

I noticed that if using multiple screens that you can not type on the strip. It has to be on the main screen. Just one for the list. Although preference for the list would be that it change to where the aircraft is at any point automatically. :-)

Thanks for the reply. Tried that before posting with no success. I uninstalled it a couple more times and rebooted the system and finally it worked.

Thanks

I just uninstalled and installed SP3. Where are the "extensions" and "airfields" folder? I looked in every folder and can't find it. Unable to add KATL

I just uninstalled and installed SP3. Where is the extensions folder and airfields folder? I looked in every folder and can't find it. Unable to add KATL

Is it normal that the STRIP does not change to TAXI after PUSHBACK? It seems that after PUSHBACK it never changes so looks like all aircraft are pushing back. Would be nice if it would change to TAXI. Even nicer with the current taxiway it is on as it moves.

Hi All! I am am looking for a new computer and I am looking for advice from all of you who are having an amazing experience with Tower!3D Pro. I’m looking specifically for your computer specs (processor, graphics card, ram, memory etc.). My experience with it is horrible but I know that I need to upgrade so I want to make sure I have the right system without killing the wallet. Thanks in advance!

I could have waited! But it's greatly appreciated!!! Thank you and congratulations on your son's wedding!

Hi Dick! Are you planning on adding CYYZ to SC?

GeForce GT420, 1GB Video Memory 3GB Shared

Hi All, I tried to resolve this with FeelTHere Support but the answer I received was they can not suggest anything else to help me with this issue so I am throwing it out there to see if someone had success with a resolution. I have all the system requirements to run the game. I waited until the SP came out to see if it would resolve the problem but no luck. When playing the game, the game takes ~5 real time seconds for every game second to elapse. Therefore a huge lag and skipping on the frames. I have reduced resolution and quality but that only makes a very slight difference and then of course the picture is pretty bad. I ran task manager and CPU runs at only 25% of capacity and Memory at 43% of capacity. So well below what is required to run the game in full resolution and quality. All drivers up to date. I remember that when playing Tower!2011 I deleted a shadow file on EDDF and that solved this lag problem so now I am throwing it out there to see if anyone has a fix since FeelThere isn't able to help me on this one. Sucks to have the game and not play it! Dom Windows 10 64Bit Intel Core i5-2300 CPU @ 2.8Ghz 6GB Memory

Same issue here. 5 real time seconds for every T3D second. Haven't found a solution yet. I have tried everything I can think of.

Thanks for your reply Avwriter! 1- intel core i5-2300 2.8 2- 6GB 3- 1GB 4- not sure 5- No 6- Yes by the way Avwriter, is it just me or is the speed either super slow or super fast for aircraft movement?

Hi all! Hoping someone can help with this one or has found a solution. I've looked at the other topics and none have helped. My screen seems to skip frames or lag. I have tried everything I can think of so if you have tried something and it works then please share. Settings are set to Fantastic and 1920 x 1080 59hz Windows 10 64 bit x64 processor GeForce Nvidia GT 420 1920 x 1080 60hz Thanks!

Hi Avwriter, I found the solution to the bat problem. I had the same issue and found a work around. Right click on Tower3D file, scroll down to properties, click security tab, click edit, in the Group or user names box choose users and make sure it's highlighted, then click the Allow box where it shows Full Control. Then click apply and that's it. Do it for both Tower3d and Tower3D Bat icon. Then when you double click on the Tower3D bat icon it will play. Let me know if that works for you. Although it let's you start the program in bat to log it, it still crashes at 70% for me

Hi Vic, 64-Bit OS 64 based processor on Windows 10 Home I sent an email with the log for the test.

Same problem Towerspeak.dll Run as admin, turned off firewall Windows 10 64Bit Failed to load 'C:/Program Files (x86)/FeelThere/Tower 3D/tower3d_Data/Plugins/towerspeak.dll' with error 'The specified module could not be found. '. (Filename: Line: 117) Fallback handler could not load library C:/Program Files (x86)/FeelThere/Tower 3D/tower3d_Data/Mono/.\C:/Program Files (x86)/FeelThere/Tower 3D/tower3d_Data/Plugins/towerspeak.dll Fallback handler could not load library C:/Program Files (x86)/FeelThere/Tower 3D/tower3d_Data/Mono/.\C:/Program Files (x86)/FeelThere/Tower 3D/tower3d_Data/Plugins/towerspeak Fallback handler could not load library C:/Program Files (x86)/FeelThere/Tower 3D/tower3d_Data/Mono/libC:/Program Files (x86)/FeelThere/Tower 3D/tower3d_Data/Plugins/towerspeak.dll Fallback handler could not load library C:/Program Files (x86)/FeelThere/Tower 3D/tower3d_Data/Mono/.\libC:/Program Files (x86)/FeelThere/Tower 3D/tower3d_Data/Plugins/towerspeak.dll Fallback handler could not load library C:/Program Files (x86)/FeelThere/Tower 3D/tower3d_Data/Mono/libC:/Program Files (x86)/FeelThere/Tower 3D/tower3d_Data/Plugins/towerspeak.dll DllNotFoundException: C:/Program Files (x86)/FeelThere/Tower 3D/tower3d_Data/Plugins/towerspeak.dll at (wrapper managed-to-native) TowerSpeak:SpeechSetVolume (single) at TowerSpeak.OnDestroy () [0x00000] in <filename unknown>:0 (Filename: Line: -1)

Same happens with me. When I try to launch bat a black windows pops up for a split second and then nothing! And I am also having it run up to 70% and nothing! I haven't seen a fix for those of us with the 70% problem being resolved. And I can't send a log since running through bat doesn't work either!

Good idea Avwriter. Although if that is not an option, I would like to see, at a minimum, an updgrade price so that purchasers of the original 3D aren't forced to pay full price twice.

Smart price target! There is a correlation that shows pricing it low enough will result in greater sales. If it's priced too high they will get less sales and even with the hike in price will not profit as well. Plus the greater the population using the product, the greater the publicity the product will get! Good job guys!