Search the Community

Hello! I try to make Lua script that connecting QW787 and VATSIM cliant (vPilot) but it does not function. Is there any idea ? Using P3Dv4.5, QW787 P3D v1.1.3 and registed FSUIPC5 Installed my lua into Prepar3D v4\Scripts folder like that QW787xpnder.lua local qw_xpnder = varget("L:QW_AFT_Transponder_Knob", "Enum") if qw_xpnder == 0 or qw_xpnder == 1 then ipc.writeSB(0x7B91, 1) elseif qw_xpnder == 2 or qw_xpnder == 3 or qw_xpnder == 4 then ipc.writeSB(0x7B91, 0) end put "FSUIPC5.ini" in Prepar3D v4\Modules folder as below. [Auto] 1=Lua QW787xpnder made Lua following SquawkBox SDK FSUIPC Offsets, and Qualitywings 787 sim builder kit http://www.squawkbox.ca/doc/sdk/fsuipc.php http://www.qualitywingssim.com/v.2.0.1.8/Documentation.php

I recently purchased both FSUPIC (4.966c) and WideFS. My goal with WideFS is to run some FSX steam applications (AS16, possibly PF3, and a flight planner) on my client laptop while running the sim on my server laptop. The server laptop is new and usually runs FSX with most add-ons adequately. The client laptop is running the same OS as the server (win10), and both are connected by cable to my router/modem from centurylink (C1900A). Both laptops have read/write permissions to their respective harddrives (I can move and change files on either computer from the other one). I installed and registered both FSUPIC and WideFS on my server laptop. I read the installation instructions for WideFS, and extracted the zip into D:\FSX_ADDON\WIDEFS. My steam FSX is also on the D drive. I installed WideClient.exe and WideClient.ini in a WideClient folder on my client laptop's desktop. When I start WideClient, I follow up with starting FSX but I always get the same result, "Waiting for a connection". Attached is a recent logfile for WideClient, which seems to always have this Error 10061. My first step was to create rules for the 8002/9002 ports on each firewall, creating inbound rules for my server and outbound rules for my client. No change. My next step was to disable to firewalls on the private network for server and client. No change. Suspecting that the 10061 error is a result of the firewall in the router, I then went into my router/modem settings under IPV4 and created a new rule for ports 8002 and 9002, allowing traffic in and out. No change. I then checked the workgroup, both are using the same WORKGROUP name. Then, per the instructions, I added the ServerName=DESKTOP... and Protocol=TCP to the WideClient.ini under [config] at the bottom. No change. I also tried to specify the IPaddress instead of the sever name with no change. I feel like there is something basic I haven't done, but I'm at a loss. Any help would be appreciated, and if there is any more detail you need I'm happy to provide anything I can. Thanks in advance. WideClient0.log

Hi, Everytime I load FSUIPC with non-default scenery, especailly UK2000 and Aerosoft Heathrow extreme, I get a crash to desktop. Here is the FSUPIC log: ********* FSUIPC4, Version 4.95 by Pete Dowson ********* Prepar3D.exe version = 3.2.3.16769 Reading options from "D:\Prepared3D\Modules\FSUIPC4.ini" Running inside Prepar3D v3 on Windows 8.0 Module base=237E0000 User Name="" User Addr="" FSUIPC4 not user registered WIDEFS7 not user registered, or expired 203 System time = 09/05/2016 17:53:41 203 FLT path = "C:\Users\Dan\Documents\Prepar3D v3 Files\" 203 ------ Module Version Check ------ 203 acontain.dll: 3.2.3.16769 203 api.dll: 3.2.3.16769 203 controls.dll: 3.2.3.16769 203 fs-traffic.dll: 3.2.3.16769 203 G3D.dll: 3.2.3.16769 203 language.dll: 3.2.3.16769 203 sim1.dll: 3.2.3.16769 203 visualfx.dll: 3.2.3.16769 203 weather.dll: 3.2.3.16769 203 window.dll: 3.2.3.16769 203 ---------------------------------- 203 Trying D:\Prepared3D\Modules\SimConnectP3D3.dll 235 Found it: trying to connect 516 FS path = "D:\Prepared3D\" 766 LogOptions=B0000000 0000001F 766 ------------------------------------------------------------------- 766 ------ Setting the hooks and direct calls into the simulator ------ 766 --- CONTROLS timer memory location obtained ok 782 --- SIM1 Frictions access gained 782 ASN active function link set 782 --- FS Controls Table located ok 782 --- Installed Mouse Macro hooks ok. 782 Wind smoothing may be by ASN, not FSUIPC, if it is running 782 Will switch smoothing action when ASN starts/stops 782 --- All links okay (except older global weather setting method) 782 ------------------------------------------------------------------- 782 SimConnect_Open succeeded: waiting to check version okay 782 Trying to use SimConnect Prepar3D 49328 Running in "Lockheed Martin® Prepar3D® v3", Version: 3.2.3.2 (SimConnect: 3.2.0.0) 49328 Initialising SimConnect data requests now 49328 FSUIPC Menu entry added 49438 Ready Flags: Ready-To-Fly=N, In Menu=Y, In Dlg=Y 49438 C:\Users\Dan\AppData\Local\Lockheed Martin\Prepar3D v3\Prepar3D_Default.fxml 49438 D:\Prepared3D\SimObjects\Airplanes\IRIS Raptor Driver\Raptor.air 52828 Deactivated for PID=16676, "chrome.exe" 55282 Memory in use: 1065Mb, Avail=3030Mb 118922 Memory in use: 1176Mb, Avail=2920Mb 179750 Memory in use: 1205Mb, Avail=2891Mb 255141 Memory in use: 1489Mb, Avail=2607Mb 303000 Deactivated for PID=16676, "chrome.exe" 303016 Lost focus to PID=16676, "chrome.exe" 315469 Memory in use: 1764Mb, Avail=2332Mb 375782 Memory in use: 2109Mb, Avail=1987Mb 394735 Lost focus to PID=16676, "chrome.exe" 412438 Ready Flags: Ready-To-Fly=N, In Menu=N, In Dlg=N 414078 System time = 09/05/2016 18:00:35, Simulator time = 17:54:22 (16:54Z) 415360 Starting everything now ... 415360 Note: "D:\Prepared3D\Modules\PFCFSX.DLL", Error 126 (The specified module could not be found. ) 415360 Note: "D:\Prepared3D\Modules\EPICINFO5.DLL", Error 126 (The specified module could not be found. ) 415360 Ready for ASN WX radar 417328 Ready Flags: Ready-To-Fly=Y, In Menu=N, In Dlg=N 437407 Memory in use: 2406Mb, Avail=1690Mb 488328 Ready Flags: Ready-To-Fly=Y, In Menu=Y, In Dlg=Y 488328 Sim stopped: average frame rate for last 76 secs = 15.0 fps 488328 Max AI traffic was 1 aircraft 497657 Memory in use: 2524Mb, Avail=1572Mb 518813 *** EVENT: Cntrl= 66074 (0x0001021a), Param= 1 (0x00000001) PITOT_HEAT_SET 518813 *** EVENT: Cntrl= 66300 (0x000102fc), Param= 0 (0x00000000) TOGGLE_STARTER1 518813 *** EVENT: Cntrl= 66301 (0x000102fd), Param= 0 (0x00000000) TOGGLE_STARTER2 518813 *** EVENT: Cntrl= 66074 (0x0001021a), Param= 1 (0x00000001) PITOT_HEAT_SET 518813 *** EVENT: Cntrl= 66300 (0x000102fc), Param= 0 (0x00000000) TOGGLE_STARTER1 518813 *** EVENT: Cntrl= 66301 (0x000102fd), Param= 0 (0x00000000) TOGGLE_STARTER2 520547 *** EVENT: Cntrl= 66300 (0x000102fc), Param= 0 (0x00000000) TOGGLE_STARTER1 520547 *** EVENT: Cntrl= 66301 (0x000102fd), Param= 0 (0x00000000) TOGGLE_STARTER2 522000 Ready Flags: Ready-To-Fly=Y, In Menu=N, In Dlg=N 523344 Weather Read request (Nr Station) to area 5: Lat=51.47, Lon=-0.45, Alt=0.0, Req=1