Jump to content
The simFlight Network Forums

uncomanded right rudder trim


Recommended Posts

after months of solving this problem, the uncommanded rudder trim issue has returned. all aircraft in fs2004 & pmdg are affected. after moving any axis or touching any button, the rudder trim mover full deflection. i took this log & would hope anyone can help me make sense of this. thanks in advance for any help, steve

119606 *** EVENT: Cntrl= 66279 (0x000102e7), Param= 0 (0x00000000) RUDDER_TRIM_RIGHT

119622 Button held, flags=X05, repeat set: bRef=0, Joy=0, Btn=8, (Result 4)

119622 [buttons] 11=R0,8,C66279,0

119637 Button held, flags=X05, repeat set: bRef=0, Joy=0, Btn=8, (Result 4)

119637 [buttons] 11=R0,8,C66279,0

119668 Button held, flags=X05, repeat set: bRef=0, Joy=0, Btn=8, (RepeatOk sets 2)

119668 [buttons] 11=R0,8,C66279,0

119668 Repeating flag set: bRef=0, Joy=0, Btn=8 (RepeatDelayCtr=11)

119668 FS Control Sent: Ctrl=66279, Param=0

119668 *** EVENT: Cntrl= 66279 (0x000102e7), Param= 0 (0x00000000) RUDDER_TRIM_RIGHT

119684 Button held, flags=X05, repeat set: bRef=0, Joy=0, Btn=8, (Result 4)

119684 [buttons] 11=R0,8,C66279,0

119715 Button held, flags=X05, repeat set: bRef=0, Joy=0, Btn=8, (RepeatOk sets 2)

119715 [buttons] 11=R0,8,C66279,0

119715 Repeating flag set: bRef=0, Joy=0, Btn=8 (RepeatDelayCtr=11)

119715 FS Control Sent: Ctrl=66279, Param=0

119715 *** EVENT: Cntrl= 66279 (0x000102e7), Param= 0 (0x00000000) RUDDER_TRIM_RIGHT

119746 Button held, flags=X05, repeat set: bRef=0, Joy=0, Btn=8, (Result 4)

119746 [buttons] 11=R0,8,C66279,0

119778 Button held, flags=X05, repeat set: bRef=0, Joy=0, Btn=8, (RepeatOk sets 2)

119778 [buttons] 11=R0,8,C66279,0

119778 Repeating flag set: bRef=0, Joy=0, Btn=8 (RepeatDelayCtr=11)

119778 FS Control Sent: Ctrl=66279, Param=0

119778 *** EVENT: Cntrl= 66279 (0x000102e7), Param= 0 (0x00000000) RUDDER_TRIM_RIGHT

679275 System time = 11:29:09, FS2004 time = 17:58:59 (22:58Z)

679275 *** FSUIPC log file being closed

Memory managed: 0 Allocs, 5562 Freed

********* FSUIPC Log file closed ***********

Link to comment
Share on other sites

ty mt. after hours of trying to understand what could be causing this i decided to close fs2004, shut the computer down & disconnect the joystick. starting everything from a clean slate seems to have fixed the problem. one of these days i'll learn to start with the easiest fix 1st. but it all works great agin thanks for your input

Link to comment
Share on other sites

i wanted to write this update to the control problem that ive posted here just in case anyone else has the same or a similar problem. i hope someone else out there can benefit from the hours of tinkering that it took me with this problem that turned out to be a very simple fix.

uncommanded control movements, in my case the rudder, were reoccurring. i thought the problem had been fixed several months ago but started again 2 days ago. the problem was due to the joystick being plugged into a "bad" port. after trying different ports on the computer, all was well. but when reconnecting to the suspected port, the problem reoccurred each time.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use. Guidelines Privacy Policy We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.