Jump to content
The simFlight Network Forums
Sign in to follow this  
tex1763

FSUIPC sudden malfunction after installing M-Panel (solved)

Recommended Posts

Hi everybody, something strange has happened with my Fsuipc 3.98, it seems that the [buttons] section of my fsuipc.ini is ignored since no general assignment I made for my Saitek cloche and throttle quadrant is working anymore.

The only working buttons are the aircraft specific ones, and the hat-switch buttons which I reprogrammed in [buttons] section.

The axis are still working normally, both general and specific.

Below there is the final section of my fsuipc.ini, which has been working great until this morning.

Any clue?

Thanks for any suggestion

EDIT:

To whom it may concern, I found the problem. :)

I realized that only the compound buttons assignments are affected by this behaviour, so I checked the involved buttons 0,0 and 0,8 in control panel for an hardware failure, but they were working correctly.

However, in order to get the mode button recognized by Fsuipc, I tweaked Fs9 by renaming the file C:\Windows\System32\SaiD0BAC.pr0 as suggested in the topic

viewtopic.php?f=54&t=68972

Today, I don't know the reason, the file was written down again preventing the mode button from Fsuipc recognition.

The only change I made was yesterday, when I installed the M-Panel driver and software and tried to get it working correctly, but I didn't even try to make it interact with Fsuipc.

In addition, I made a complete flight after installing it and my Saitek cloche still worked as expected.

[buttons]

ButtonRepeat=20,5

0=H0,1,K74,8 ;J - push-to-talk

1=CR(-0,0)(+0,8)0,2,C65754,0 ;ZOOM_IN_FINE

2=CR(-0,0)(+0,8)0,3,C65755,0 ;ZOOM_OUT_FINE

3=CR(-0,0)(+0,8)0,4,C66528,0 ;EYEPOINT_FORWARD (HAT)

4=CR(-0,0)(+0,8)0,5,C66529,0 ;EYEPOINT_BACK (HAT)

5=CP(-0,0)(+0,8)0,6,C65749,0 ;VIEW_MODE_PREV

6=CP(-0,0)(+0,8)0,7,C65567,0 ;VIEW_MODE

9=CP(-0,0)(+0,8)0,15,C65759,0 ;FLAP_INC

10=CP(-0,0)(+0,8)0,14,C65758,0 ;FLAP_DEC

11=CP(-0,0)(+0,8)0,16,C65570,0 ;GEAR_TOGGLE

12=CR(+0,0)(+0,8)0,2,C65641,0 ;NAV1_RADIO_WHOLE_INC

13=CR(+0,0)(+0,8)0,3,C65645,0 ;NAV2_RADIO_WHOLE_INC

14=CR(+0,0)(+0,8)0,4,C65643,0 ;NAV1_RADIO_FRACT_INC

15=CR(+0,0)(+0,8)0,5,C65647,0 ;NAV2_RADIO_FRACT_INC

16=CP(+0,0)(+0,8)0,7,C66448,0 ;NAV1_RADIO_SWAP

17=CP(+0,0)(+0,8)0,6,C66452,0 ;NAV2_RADIO_SWAP

18=CR(+0,0)(+0,8)0,34,C65663,0 ;VOR1_OBI_INC

19=CR(+0,0)(+0,8)0,38,C65662,0 ;VOR1_OBI_DEC

20=CR(+0,0)(+0,8)0,32,C65665,0 ;VOR2_OBI_INC

21=CR(+0,0)(+0,8)0,36,C65664,0 ;VOR2_OBI_DEC

40=CR(+0,0)0,11,C65648,0 ;ADF_100_INC

41=CR(+0,0)0,12,C65649,0 ;ADF_10_INC

42=CR(+0,0)0,13,C65650,0 ;ADF_1_INC

50=CR(-0,0)0,32,C66524,0 ;EYEPOINT_UP (HAT)

52=CR(-0,0)0,36,C66525,0 ;EYEPOINT_DOWN (HAT)

54=CR(-0,0)0,34,C66526,0 ;EYEPOINT_RIGHT (HAT)

56=CR(-0,0)0,38,C66527,0 ;EYEPOINT_LEFT (HAT)

57=R0,20,C65602,0 ;THROTTLE_DECR (reverse)

58=U0,20,C65604,0 ;THROTTLE_CUT (stop reverse)

60=B8320=1 P0,34,C65676,0 ;VIEW_RIGHT in 2d cockpit

61=B8320=1 U0,34,C65674,0

62=B8320=1 P0,38,C65680,0 ;VIEW_LEFT in 2d cockpit

63=B8320=1 U0,38,C65674,0

64=B8320=1 P0,33,C65675,0 ;VIEW_FORWARD_RIGHT in 2d cockpit

65=B8320=1 U0,33,C65674,0

66=B8320=1 P0,39,C65681,0 ;VIEW_FORWARD_LEFT in 2d cockpit

67=B8320=1 U0,39,C65674,0

68=B8320=1 P0,35,C65677,0 ;VIEW_REAR_RIGHT in 2d cockpit

69=B8320=1 U0,35,C65674,0

60=B8320=1 P0,37,C65679,0 ;VIEW_REAR_LEFT in 2d cockpit

61=B8320=1 U0,37,C65674,0

62=B8320=1 P0,32,C66524,0

62=B8320=1 P0,36,C66525,0

[Axes]

0=0X,256,D,1,0,0,0

1=0Y,256,D,2,0,0,0

2=0Z,256,D,4,0,0,0

3=0R,256,D,6,0,0,0

4=0U,256,D,5,0,0,0

5=2R,256,F,65764,0,0,0

[Axes.PMDG 737]

0=0X,256,D,1,0,0,0

1=0Y,256,D,2,0,0,0

2=0Z,256,D,4,0,0,0

3=0R,256,D,22,0,0,0

4=0U,256,D,23,0,0,0

[buttons.PMDG 737]

0=P0,14,K71,11

7=P0,16,K71,8

8=P0,20,K113,8

[JoystickCalibration.PMDG 737]

AllowSuppressForPFCquad=Yes

ExcludeThrottleSet=Yes

ExcludeMixtureSet=Yes

ExcludePropPitchSet=Yes

SepRevsJetsOnly=No

ApplyHeloTrim=No

UseAxisControlsForNRZ=No

FlapsSetControl=0

FlapDetents=No

ReverserControl=66292

Reverser1Control=66422

Reverser2Control=66425

Reverser3Control=66428

Reverser4Control=66431

MaxThrottleForReverser=256

AileronTrimControl=0

RudderTrimControl=0

CowlFlaps1Control=0

CowlFlaps2Control=0

CowlFlaps3Control=0

CowlFlaps4Control=0

MaxSteerSpeed=60

LeftBrake=-16384,16383/16

RightBrake=-16384,16383/16

Flaps=-16254,16380/16

[Monitor]

Display=5

[buttons.DreamFleet]

0=P0,19,C65907,0 ;Radio Panel

1=P0,18,C65908,0

2=P0,17,CM1:4,0

[buttons.Aeroworx]

0=P0,19,C65911,0

1=P0,18,C65907,0

[Keys]

1=32,10,65706,0

[buttons.C172 Anniversary]

0=P0,19,C65908,0

[buttons.Cessna Skylane II RG R182]

0=P0,19,C65911,0

[Axes.Aeroworx]

0=0X,256,D,1,0,0,0

1=0Y,256,D,2,0,0,0

2=0Z,256,D,4,0,0,0

3=0R,256,D,14,0,0,0

4=0U,256,D,13,0,0,0

5=2R,256,F,65764,0,0,0

[buttons.Cessna Skylane II RG R182 3]

0=P0,19,C65911,0

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
Sign in to follow this  

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use. Guidelines Privacy Policy We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.