Jump to content
The simFlight Network Forums

GoFlight Efis profile wanted


Recommended Posts

I just acquired the Go Flight Efis module, but my programming capabilities are null, so maybe somebody can help me with an already made profile for PDMGB747, CS757/767, or Level D B767.-

Maybe a easy to understand tutorial should help.

The EFIS module is just a collection of knobs and switches -- no indicators or displays. So there is no "programming" involved! It is merely a process of assignment of "buttons and Switches" to the controls specific to your aircraft. Assigning buttons is covered completely in the FSUIPC documentation, along with pictures.

Regards

Pete

Link to comment
Share on other sites

The macros in that post for the Go Flight EFIS apply to the old FSUIPC aircraft specific settings method, now I am using the actual aircraft profiles, so how can I merge the buttons list ?

I have a unique profile for all my comercial jet aircrafts including the Level D B767.-

This is my FSUIPC.ini:

[General]

UpdatedByVersion=4628

History=4YVYY92NMA2VSR5UVPI30

TCASid=Flight

TCASrange=40

AxisCalibration=No

DirectAxesToCalibs=No

ShowMultilineWindow=Yes

SuppressSingleline=No

SuppressMultilineFS=No

AxisIntercepts=No

DontResetAxes=No

WeatherReadFactor=2

WeatherRewriteSeconds=1

CustomWeatherModify=No

SimConnectStallTime=1

MouseWheelTrim=No

MouseWheelTrimSpeed=1

JoystickTimeout=15

FixControlAccel=Yes

FixMachSpeedBug=No

VisibilityOptions=No

OneCloudLayer=No

CloudTurbulence=No

CloudIcing=No

GenerateCirrus=Yes

SuppressCloudTurbulence=No

MaxIce=-4

MinIce=-4

UpperWindGusts=No

SuppressWindTurbulence=No

SuppressWindVariance=No

WindTurbulence=Yes

TurbulenceRate=1.0,5.0

TurbulenceDivisor=20,20,40,40

SuppressAllGusts=No

MaxSurfaceWind=0

WindLimitLevel=200

WindDiscardLevel=400

WindAjustAltitude=No

WindAjustAltitudeBy=2000

SmoothBySimTime=No

WindSmoothing=No

WindSmoothness=2

WindSmoothAirborneOnly=Yes

PressureSmoothness=0

TemperatureSmoothness=0

DisconnTrimForAP=No

ZeroElevForAPAlt=No

ThrottleSyncAll=No

WhiteMessages=No

ShowPMcontrols=No

SpoilerIncrement=512

MagicBattery=No

RudderSpikeRemoval=No

ElevatorSpikeRemoval=No

AileronSpikeRemoval=No

ReversedElevatorTrim=No

ClockSync=No

ClockSyncMins=5

ClearWeatherDynamics=No

OwnWeatherChanges=No

TimeForSelect=4

LoadFlightMenu=No

LoadPlanMenu=No

PauseAfterCrash=No

BrakeReleaseThreshold=75

SaveDataWithFlights=No

ZapSound=firework

ShortAircraftNameOk=Substring

UseProfiles=Yes

Console=No

PollGFTQ6=Yes

BlankDisplays=No

GetNearestAirports=No

LuaRerunDelay=66

[JoyNames]

AutoAssignLetters=No

0=CH PRO PEDALS USB

0.GUID={631A6290-C9A3-11DF-8001-444553540000}

1=CH THROTTLE QUADRANT

1.GUID={631A6290-C9A3-11DF-8002-444553540000}

2=CH FLIGHT SIM YOKE USB

2.GUID={631A89A0-C9A3-11DF-8003-444553540000}

[WideServer]

WideFSenabled=Yes

[buttons]

ButtonRepeat=20,10

1=P1,0,K54,8

2=P1,1,K55,8

3=P1,4,K52,9

4=P1,5,K90,8

5=P1,7,K191,9

6=P1,8,K82,9

7=P1,9,K90,8

8=P1,10,K117,8

9=P1,11,K118,8

10=P2,4,K121,8

11=P2,5,K120,8

12=P2,7,K122,8

13=R2,10,K36,8

14=R2,11,K35,8

15=R2,8,K13,9

16=R2,9,K8,9

17=P2,1,K190,8

18=R2,3,K135,10

19=R2,2,K45,10

[AutoSave]

AutoSaveEnabled=No

[GPSout]

GPSoutEnabled=No

Port=COM0

Speed=4800

Interval=2000

PosTo6Decimal=No

Sentences=

[GPSout2]

GPSoutEnabled=No

Port=<none set>

Speed=4800

Interval=2000

PosTo6Decimal=No

Sentences=

[Axes]

0=0X,256,D,7,40,0,0

1=0Y,256,D,8,0,0,0

2=0Z,256,D,3,40,0,0

3=2X,256,D,1,38,0,0

4=2Y,256,D,2,39,0,0

5=2Z,256,D,4,0,0,0

6=2U,256,D,6,0,0,0

7=2V,256,D,5,0,0,0

8=2P,0,F,66416,0,0,0

[JoystickCalibration]

AllowSuppressForPFCquad=Yes

ExcludeThrottleSet=Yes

ExcludeMixtureSet=Yes

ExcludePropPitchSet=Yes

SepRevsJetsOnly=No

ApplyHeloTrim=No

UseAxisControlsForNRZ=No

FlapsSetControl=0

FlapDetents=No

ReverserControl=66292

Reverser1Control=66422

Reverser2Control=66425

Reverser3Control=66428

Reverser4Control=66431

MaxThrottleForReverser=256

AileronTrimControl=66731

RudderTrimControl=66732

CowlFlaps1Control=66162

CowlFlaps2Control=66163

CowlFlaps3Control=66164

CowlFlaps4Control=66165

SteeringTillerControl=0

MaxSteerSpeed=60

Aileron=-16253,-520,-520,15744

Elevator=-15213,-1430,-1430,16128

Rudder=-16384,0,0,16256

Throttle=-16384,16383

PropPitch=-16384,16383

Mixture=-16253,16383

LeftBrake=-16384,15616/16

RightBrake=-16253,16383/16

Reverser1=-16384,14848

Reverser2=-16384,14848

Reverser3=-16384,14208

Reverser4=-16384,14208

Spoilers=-16380,16380/16

SyncSlopeThrottle3=26/26

PropPitch1=-16384,-16384,0,14720

PropPitch2=-16384,-16384,512,16383

Throttle1=-16253,-10532,512,14208

Throttle2=-16384,-8842,512,15232

Throttle3=-16384,-512,512,14720

Throttle4=-16384,-512,512,16383

[Profile.Jets]

1=PMDG

2=FeelThere Boeing

3=Learjet 45

4=Level D Simulations B767-300ER

5=Commercial Level

6=Boeing 737-800

7=Boeing 747-400

8=Bombardier CRJ 700

9=CS 727-200

10=CS 727-100

11=Captain Sim 757-200

11=CS 767-300

12=Boeing 777-223ER

13=CS 767-300

14=CS 767 Captain AWACS

15=MS-760_AAF

16=LSH MD-82

17=Super 80 Professional

18=Eaglesoft Citation

19=PIC Citation X

20=jf_A320-211 CFM56

21=jf_A320-232_IAE

22=Airbus A321

23=A330-200

24=Feelthere A340-300 Airbus

25=Feelthere A340-600 Airbus

26=CS_B707-300

27=Concorde

[Axes.Jets]

0=0X,256,D,7,0,0,0

1=0Y,256,D,8,0,0,0

2=0Z,256,D,3,40,0,0

3=1X,256,D,9,0,0,0

4=1Y,256,D,10,0,0,0

5=1Z,256,D,11,0,0,0

6=1R,256,D,43,44,0,0

7=1U,256,D,12,0,0,0

8=1V,256,D,41,42,0,0

9=2X,256,D,1,38,0,0

10=2Y,256,D,2,39,0,0

11=2U,256,D,22,0,0,0

12=2P,0,F,66416,0,0,0

[Profile.Prop Twin]

1=FSD Panther

2=RealAir Beech Duke

3=Beech Baron

4=PA-34 SENECA II

5=FSD Navajo Flair

6=Douglas DC-3

7=RealAir Beech Duke

8=IA-35 Huanquero

9=Piper PA-44 Seminole

10=Navajo

11=Eaglesoft Piper TC

[Axes.Prop Twin]

0=0X,256,D,7,40,0,0

1=0Y,256,D,8,0,0,0

2=0Z,256,D,3,40,0,0

3=1X,256,D,9,0,0,0

4=1Y,256,D,10,0,0,0

5=1Z,256,D,17,0,0,0

6=1R,256,D,14,0,0,0

7=1U,256,D,18,0,0,0

8=1V,256,D,13,0,0,0

9=2X,256,D,1,38,0,0

10=2Y,256,D,2,39,0,0

11=2Z,256,D,4,0,0,0

12=2U,256,D,6,0,0,0

13=2V,256,D,5,0,0,0

14=2P,0,F,66416,0,0,0

[Profile.Turboprop BAE]

1=PMDG J-41

[Axes.Turboprop BAE]

0=0X,256,D,7,40,0,0

1=0Y,256,D,8,0,0,0

2=0Z,256,D,3,40,0,0

3=1X,256,D,9,0,0,0

4=1Y,256,D,10,0,0,0

5=1R,256,D,18,0,0,0

6=1V,256,D,17,0,0,0

7=2X,256,D,1,38,0,0

8=2Y,256,D,2,39,0,0

9=2Z,256,D,4,0,0,0

10=2U,256,D,6,0,0,0

11=2V,256,D,5,0,0,0

12=2P,0,F,66416,0,0,0

[JoystickCalibration.Turboprop BAE]

AllowSuppressForPFCquad=Yes

ExcludeThrottleSet=Yes

ExcludeMixtureSet=Yes

ExcludePropPitchSet=Yes

SepRevsJetsOnly=No

ApplyHeloTrim=No

FlapsSetControl=0

FlapDetents=No

ReverserControl=66292

Reverser1Control=66422

Reverser2Control=66425

Reverser3Control=66428

Reverser4Control=66431

MaxThrottleForReverser=256

AileronTrimControl=66731

RudderTrimControl=66732

CowlFlaps1Control=66162

CowlFlaps2Control=66163

CowlFlaps3Control=66164

CowlFlaps4Control=66165

SteeringTillerControl=0

MaxSteerSpeed=60

Aileron=-16253,-520,-520,15744

Elevator=-15213,-1430,-1430,16128

Rudder=-16384,-130,-130,16128

Throttle=-16384,16383

PropPitch=-16384,16383

Mixture=-16253,16383

LeftBrake=-16384,15616/16

RightBrake=-16253,16383/16

Throttle1=-16384,-11963,512,14208

Throttle2=-16384,-8582,512,15232

Throttle3=-16384,-512,512,14720

Throttle4=-16384,-512,512,16383

PropPitch1=-16384,-16384,-16384,14848

PropPitch2=-16384,-16384,-16384,14208

Spoilers=-16380,16380/16

Reverser1=-16384,14848

Reverser2=-16384,14848

Reverser3=-16384,14208

Reverser4=-16384,14208

UseAxisControlsForNRZ=No

SlopeRudder=15

[Profile.Turboprop Cheyenne]

1=Piper PA31T

2=Piper PA31T1

3=Piper PA31T2

4=de Havilland Canadian Twin Otter

[Axes.Turboprop Cheyenne]

0=0X,256,D,7,40,0,0

1=0Y,256,D,8,0,0,0

2=0Z,256,D,3,40,0,0

3=1X,256,D,9,0,0,0

4=1Y,256,D,10,0,0,0

5=1Z,256,D,17,0,0,0

6=1R,256,D,14,0,0,0

7=1U,256,D,18,0,0,0

8=1V,256,D,13,0,0,0

9=2X,256,D,1,38,0,0

10=2Y,256,D,2,39,0,0

11=2Z,256,D,4,0,0,0

12=2U,256,D,6,0,0,0

13=2V,256,D,5,0,0,0

14=2P,0,F,66416,0,0,0

[JoystickCalibration.Turboprop Cheyenne]

AllowSuppressForPFCquad=Yes

ExcludeThrottleSet=Yes

ExcludeMixtureSet=Yes

ExcludePropPitchSet=Yes

SepRevsJetsOnly=No

ApplyHeloTrim=No

FlapsSetControl=0

FlapDetents=No

ReverserControl=66292

Reverser1Control=66422

Reverser2Control=66425

Reverser3Control=66428

Reverser4Control=66431

MaxThrottleForReverser=256

AileronTrimControl=66731

RudderTrimControl=66732

CowlFlaps1Control=66162

CowlFlaps2Control=66163

CowlFlaps3Control=66164

CowlFlaps4Control=66165

SteeringTillerControl=0

MaxSteerSpeed=60

Aileron=-16253,-520,-520,15744

Elevator=-15213,-1430,-1430,16128

Rudder=-16384,0,0,16256

Throttle=-16384,16383

PropPitch=-16384,16383

Mixture=-16253,16383

LeftBrake=-16384,15616/16

RightBrake=-16253,16383/16

Throttle1=-16384,-11703,-512,14208

Throttle2=-16384,-11312,-512,15232

Throttle3=-16384,-512,512,14720

Throttle4=-16384,-512,512,16383

Mixture1=-16384,8192,8192,14976/32

Mixture2=-16384,8192,8192,14208/32

PropPitch1=-16384,-16384,-16384,14720

PropPitch2=-16384,-16384,-16384,14976

Spoilers=-16380,16380/16

Reverser1=-16384,14848

Reverser2=-16384,14848

Reverser3=-16384,14208

Reverser4=-16384,14208

UseAxisControlsForNRZ=No

[MacroFiles]

1=747 OHD

2=APchart

[JoystickCalibration.Jets]

AllowSuppressForPFCquad=Yes

ExcludeThrottleSet=Yes

ExcludeMixtureSet=Yes

ExcludePropPitchSet=Yes

SepRevsJetsOnly=No

ApplyHeloTrim=No

UseAxisControlsForNRZ=No

FlapsSetControl=0

FlapDetents=No

ReverserControl=66292

Reverser1Control=66422

Reverser2Control=66425

Reverser3Control=66428

Reverser4Control=66431

MaxThrottleForReverser=256

AileronTrimControl=66731

RudderTrimControl=66732

CowlFlaps1Control=66162

CowlFlaps2Control=66163

CowlFlaps3Control=66164

CowlFlaps4Control=66165

SteeringTillerControl=0

MaxSteerSpeed=60

Aileron=-16253,-520,-520,15744

Elevator=-15213,-1430,-1430,16128

Rudder=-16384,0,0,16256

Throttle=-16384,16383

PropPitch=-16384,16383

Mixture=-16253,16383

LeftBrake=-16384,15616/16

RightBrake=-16253,16383/16

Throttle1=-16384,-512,512,14208/32

Throttle2=-16253,-512,512,15360/32

Throttle3=-16384,-512,512,14720/32

SyncSlopeThrottle3=26/26,33/33,44/47,62/66,85/86,104/104,127/128

Throttle4=-16384,-512,512,14848/32

PropPitch1=-16384,-16384,0,14720

PropPitch2=-16384,-16384,512,16383

Spoilers=-16380,16380/16

Reverser1=-16253,14848/8

Reverser2=-16253,14848/8

Reverser3=-16253,14208/8

Reverser4=-16253,14208/8

SyncSlopeThrottle4=26/33,30/47,53/66,81/86,109/104,127/128

[JoystickCalibration.Prop Twin]

AllowSuppressForPFCquad=Yes

ExcludeThrottleSet=Yes

ExcludeMixtureSet=Yes

ExcludePropPitchSet=Yes

SepRevsJetsOnly=No

ApplyHeloTrim=No

UseAxisControlsForNRZ=No

FlapsSetControl=0

FlapDetents=No

ReverserControl=66292

Reverser1Control=66422

Reverser2Control=66425

Reverser3Control=66428

Reverser4Control=66431

MaxThrottleForReverser=256

AileronTrimControl=66731

RudderTrimControl=66732

CowlFlaps1Control=66162

CowlFlaps2Control=66163

CowlFlaps3Control=66164

CowlFlaps4Control=66165

SteeringTillerControl=0

MaxSteerSpeed=60

Aileron=-16253,-520,-520,15744

Elevator=-14043,-260,-260,16256

Rudder=-16384,0,0,16256

Throttle=-16384,16383

PropPitch=-16384,16383

Mixture=-16253,16383

LeftBrake=-16384,15616/16

RightBrake=-16253,16383/16

Throttle1=-16384,-512,512,14208/32

Throttle2=-16384,-512,512,15360/32

SyncSlopeThrottle2=26/26

Throttle3=-16384,-512,512,14720/32

SyncSlopeThrottle3=26/26

Throttle4=-16384,-512,512,16383/32

PropPitch1=-16384,-16384,0,14720

PropPitch2=-16384,-16384,512,16383

Spoilers=-16380,16380/16

Reverser1=-16384,14848

Reverser2=-16384,14848

Reverser3=-16384,14208

Reverser4=-16384,14208

[Profile.Turboprop ATR]

1=Flight 1 ATR 72-500

[Axes.Turboprop ATR]

0=0X,256,D,7,40,0,0

1=0Y,256,D,8,0,0,0

2=0Z,256,D,3,40,0,0

3=1X,256,D,9,0,0,0

4=1Y,256,D,10,0,0,0

5=1Z,256,D,17,0,0,0

6=1R,256,F,14,0,0,0

7=1U,256,D,18,0,0,0

8=1V,256,D,13,0,0,0

9=2X,256,D,1,38,0,0

10=2Y,256,D,2,39,0,0

11=2Z,256,D,4,0,0,0

12=2U,256,D,6,0,0,0

13=2V,256,D,5,0,0,0

14=2P,0,F,66416,0,0,0

[sounds]

Path=E:\FS10\Sound\

Device1=Controlador primario de sonido

Device2=Altavoces (SoundMAX Integrated Digital HD Audio)

Device3=Interfaz SPDIF (SoundMAX Integrated Digital HD Audio)

[Window.Radar Contact]

Docked=56, 13546, 3531, 2442

I tested the EFIS and all buttons are recognized within FSUIPC as joystick 170

Thanks

Jorge

Link to comment
Share on other sites

The macros in that post for the Go Flight EFIS apply to the old FSUIPC aircraft specific settings method, now I am using the actual aircraft profiles, so how can I merge the buttons list ?

You just need to take the actual parameter lines, make sure their numbering doesn't clash with any you have already, and paste them into the [buttons.xxxxx] section applicable to whatever Profile you wish to use them in. Or if you want them applicable to all, paste them into your [buttons] section

I tested the EFIS and all buttons are recognized within FSUIPC as joystick 170

If that's not the same joystick number used in the stuff you want to include you'll need to edit those too.

Regards

Pete

Link to comment
Share on other sites

This is what I currently use (its been tweaked since my post of a couple of years ago), if this helps you:

[buttons.Level D Simulations B767-300ER]

7=P170,21,CM2:5,0

8=P170,21,CM2:5,0

9=P170,21,CM2:5,0

10=P170,21,CM2:5,0

11=P170,21,CM2:5,0

12=P170,21,CM2:4,0

13=P170,20,CM2:5,0

14=P170,20,CM2:5,0

15=P170,20,CM2:5,0

16=P170,20,CM2:5,0

17=P170,20,CM2:5,0

18=P170,22,CM2:5,0

19=P170,22,CM2:5,0

20=P170,22,CM2:5,0

21=P170,22,CM2:5,0

22=P170,22,CM2:5,0

23=P170,22,CM2:4,0

24=P170,22,CM2:4,0

25=P170,23,CM2:5,0

26=P170,23,CM2:5,0

27=P170,23,CM2:5,0

28=P170,23,CM2:5,0

29=P170,23,CM2:5,0

30=P170,23,CM2:4,0

31=P170,23,CM2:4,0

32=P170,23,CM2:4,0

33=P170,24,CM2:5,0

34=P170,24,CM2:5,0

35=P170,24,CM2:5,0

36=P170,24,CM2:5,0

37=P170,24,CM2:5,0

38=P170,24,CM2:4,0

39=P170,24,CM2:4,0

40=P170,24,CM2:4,0

41=P170,24,CM2:4,0

42=P170,16,CM2:1,0

43=P170,16,CM2:1,0

44=P170,16,CM2:1,0

45=P170,16,CM2:1,0

46=P170,16,CM2:1,0

47=P170,16,CM2:2,0

48=P170,16,CM2:2,0

49=P170,17,CM2:1,0

50=P170,17,CM2:1,0

51=P170,17,CM2:1,0

52=P170,17,CM2:1,0

53=P170,17,CM2:1,0

54=P170,17,CM2:2,0

55=P170,17,CM2:2,0

56=P170,17,CM2:2,0

57=P170,18,CM2:1,0

58=P170,18,CM2:1,0

59=P170,18,CM2:1,0

60=P170,18,CM2:1,0

61=P170,18,CM2:1,0

62=P170,18,CM2:2,0

63=P170,19,CM2:1,0

64=P170,19,CM2:1,0

65=P170,19,CM2:1,0

66=P170,19,CM2:1,0

67=P170,19,CM2:1,0

68=P170,9,CM2:6,0

69=P170,8,CM2:6,0

70=P170,11,CM2:7,0

71=P170,10,CM2:7,0

//72=P170,28,CM2:10,0

//73=P170,29,CM2:11,0

//74=P170,30,CM2:8,0

//75=P170,31,CM2:9,0

74=P170,1,CM2:56,0

76=P170,5,CM2:12,0

77=P170,4,CM2:15,0

78=P170,3,CM2:13,0

79=P170,2,CM2:14,0

81=P174,10,CM2:17,0

82=P174,9,CM2:18,0

83=P174,11,CM2:19,0

84=P174,8,CM2:20,0

95=P174,0,CM2:33,0

//96=P170,14,CM2:3,0

98=P170,13,CM2:34,0

99=P170,12,CM2:35,0

100=P170,25,CM2:5,0

101=P170,25,CM2:5,0

102=P170,25,CM2:5,0

103=P170,25,CM2:5,0

104=P170,25,CM2:5,0

105=P170,25,CM2:4,0

106=P170,25,CM2:4,0

107=P170,25,CM2:4,0

108=P170,25,CM2:4,0

109=P170,25,CM2:4,0

112=P101,7,CM2:41,0

113=P109,5,CM2:37,0

114=U109,5,CM2:39,0

118=P101,9,CM2:43,0

120=P170,0,CM2:54,0

121=P1,6,K54,9

122=P1,5,K55,9

123=P1,4,K53,9

124=P101,15,CM2:41,0

125=P170,15,C1005,43535

126=CP(F+170,15)170,28,CM2:49,0

127=CP(F+170,15)170,29,CM2:50,0

128=CP(F-170,15)170,28,CM2:10,0

129=CP(F-170,15)170,29,CM2:11,0

130=CU(F+170,15)170,28,CM2:49,0

131=CU(F+170,15)170,29,CM2:50,0

132=CU(F-170,15)170,28,CM2:10,0

133=CU(F-170,15)170,29,CM2:11,0

134=P170,6,CM2:16,0

//135=U170,31,CM2:9,0

//136=U170,30,CM2:8,0

137=P173,0,CM2:3,0

138=P170,14,C1005,43535

139=CP(F+170,14)170,30,CM2:51,0

140=CP(F+170,14)170,31,CM2:52,0

141=CP(F-170,14)170,30,CM2:8,0

142=CP(F-170,14)170,31,CM2:9,0

143=CU(F+170,14)170,30,CM2:51,0

144=CU(F+170,14)170,31,CM2:52,0

145=CU(F-170,14)170,30,CM2:8,0

146=CU(F-170,14)170,31,CM2:9,0

151=P0,18,K53,9

152=P0,19,K54,9

153=P0,16,CM2:45,0

155=P165,2,CM2:53,0

156=P165,1,CM2:3,0

163=P0,14,K87,11

167=P158,14,CL23:R,0

168=U158,14,CL23:K,0

169=P0,15,K75,11

170=R169,1,C66635,0

171=U169,1,C65967,0

172=R169,2,C66636,0

173=U169,2,C65972,0

174=P0,17,C65876,0

with the following macro file:

[Macros]

Module="B767main.GAU"

1=HSI+=RX30a0*X8bcc

2=HSI-=RX30c0*X8bcc

3=SETBUGS=RX3970*X8bcc

4=RANGE+=RX3060*Xa1cc

5=RANGE-=RX3080*Xa1cc

6=LEFTVORADF=RX7470*X83cc

7=RIGHTVORADF=RX74f0*X83cc

10=BARO+=RX3330*Xa1cc

11=BARO-=RX3250*Xa1cc

12=EFISNAV=RX2f50*Xa1cc

13=EFISARPT=RX2f90*Xa1cc

14=EFISDATA=RX2fd0*Xa1cc

15=EFISWPT=RX3010*Xa1cc

16=EFISTCAS=RX30e0*Xa1cc

27=THRUSTTEMP+=RX6f50*Xa1cc

28=THRUSTTEMP-=RX6df0*X55cc

34=ENGINEDISPLAY=RX1d60*Xa1cc

35=STATUSDISPLAY=RX1d90*Xa1cc

37=CLOCKRUN=RX2850*Xa100

38=CLOCKHOLD=RX2890*Xa1cc

39=CLOCKRESET=RX2820*Xa1cc

40=CHRTOGGLE=RX27b0*Xddcc

49=MDA+=RX34a0*Xa1cc

50=MDA-=RX34d0*Xa1cc

Module1="B767pedestal.GAU"

8=DH+=R1:X4540*Xa1cc

9=DH-=R1:X44d0*Xa1cc

Module2="B767Afds.GAU"

17=NAVMIN+=R2:X2130*Xa1cc

18=NAVMIN-=R2:X21d0*Xa1cc

19=NAVMJR+=R2:X2030*Xa1cc

20=NAVMJR-=R2:X2070*Xa1cc

23=AUTOBRAKES-

23.1=R3:Xf330*X8bcc

23.2=R2:X1f00*Xa1cc

24=AUTOBRAKES+

24.1=R3:Xf330*X8bcc,31

24.2=R2:X1ed0*Xa1cc

25=ALTNFLAPS+=R2:X1bb0*Xa1cc

26=ALTNFLAPS-=R2:X1b60*Xa1cc

33=FOVORDME=R2:X22c0*X6acc

36=CAUTIONCANCEL=R2:X1d30*X56cc

41=GOAROUND=R2:Xdeb0*X55cc

51=BANKANGLE+=R2:X17f0*Xa100

52=BANKANGLE-=R2:X1810*Xa1cc

53=WARNINGCANCEL

53.1=R2:X1cc0*X8bcc

53.2=R2:X1cc0*X8bcc

54=RECALL

54.1=R2:X1e40*X6acc

54.2=R2:X1e40*X6acc

56=CANCEL=R2:X1d30*X56cc

Module3="window.dll"

42=ASILESTANDLGT=R3:Xf330*X8bcc

43=ASLGT=R3:Xf330*X8bcc

46=FMC=R3:Xf330*X8bcc

47=RADIOPANEL=R3:Xf330*X8bcc

48=OVERHEADPANEL=R3:Xf330*X8bcc

Module4="B767Overhead.GAU"

21=LPACK-=R4:X33e0*Xa1cc

22=RPACK-=R4:X3420*Xa1cc

29=LPACK+=R4:X3400*Xa1cc

30=APU+=R4:X24a0*Xa1cc

31=RPACK+=R4:X3440*Xa1cc

32=APU-=R4:X23a0*Xa1cc

Module5="rxpDrop.DLL"

44=WXR

44.1=R5:X7740*X83cc

44.2=R6:Xf480*X83cc

Module6="rxpWX500.DLL"

Module7="fcrew3.GAU"

45=FS2CREWMAIN

45.1=R7:1

45.2=R8:Xb9c0*X8bcc

45.3=R8:Xb9a0*X8bcc

Module8="FS2CrewLDS767.GAU"

Link to comment
Share on other sites

This is what I currently use (its been tweaked since my post of a couple of years ago), if this helps you:

WARNING: The "CM2" in many of those lines refers to the macro File number (2) in the list in the [MacroFiles] section of the INI, so that will have to be checked , or edited, to make sure it refers to the Macro file you list.

Regards

Pete

Link to comment
Share on other sites

WARNING: The "CM2" in many of those lines refers to the macro File number (2) in the list in the [MacroFiles] section of the INI, so that will have to be checked , or edited, to make sure it refers to the Macro file you list.

Regards

Pete

That is correct Pete, the orginal post over at LevelD includes all the relevent entries for the ini file, the post I made was simply to show soldano about the [buttons] entry and to provide an updated command list.

Link to comment
Share on other sites

Thanks Pete

Steveo38, I know about your patience, so I dare asking you how do I include the buttons list in the context of my ini ?

Thanks again

Jorge

It's as per the LevelD post I orginally referred you to and you need to follow that. In summary simply paste the [buttons.Level D Simulations B767-300ER] entry into your ini file (assuming you don't have one already). Create the macro file - details in the LevelD post, change your macro's section in the ini file to this

[MacroFiles]

1=747 OHD

2=LVLD767

3=APchart

and you are done. If you use the APchart macro's they may not work now since the number has changed. If thats the case, as Pete has pointed out, change all the CM2 entries in [buttons.Level D Simulations B767-300ER] to CM3 and change the macro's section to this:

[MacroFiles]

1=747 OHD

2=APchart

3=LVLD767

Hopefully thats cleared everything up.

Link to comment
Share on other sites

It's as per the LevelD post I orginally referred you to and you need to follow that. In summary simply paste the [buttons.Level D Simulations B767-300ER] entry into your ini file (assuming you don't have one already). Create the macro file - details in the LevelD post, change your macro's section in the ini file to this

[MacroFiles]

1=747 OHD

2=LVLD767

3=APchart

and you are done. If you use the APchart macro's they may not work now since the number has changed. If thats the case, as Pete has pointed out, change all the CM2 entries in [buttons.Level D Simulations B767-300ER] to CM3 and change the macro's section to this:

[MacroFiles]

1=747 OHD

2=APchart

3=LVLD767

Hopefully thats cleared everything up.

As can be seen in the ini I sent before, I have already the Level D B767 included in my jets profile, provided that, is still valid to paste the buttons list as you said in your post ?

Thanks

Link to comment
Share on other sites

You don't appear to have a [buttons.jets] section so all will be well, just follow the instructions in my previous post.

Steveo38,

GREAT, IT WORKS !!

Some questions:

I noticed that the mode selector rotary knob has only 4 positions, so full rose VOR and ILS are missing.- How can I make them work ?, or instead how can I replace the actual VOR and APP positions for full rose VOR and ILS, which I use best ?

The DH MDA rotary works OK, but when I push it, it comands the banking angle positions of the heading AP system, is that correct ?.-

Did you make other profiles such as for the PDMG B747, Wilco B737 or Capt Sim B757/767 ?.-

Thanks

Link to comment
Share on other sites

I noticed that the mode selector rotary knob has only 4 positions, so full rose VOR and ILS are missing.- How can I make them work ?, or instead how can I replace the actual VOR and APP positions for full rose VOR and ILS, which I use best ?

I have just spent some time and sorted this out for you. Change the line numbers 42 through to 56 with the following:

42=P170,16,CM2:2,0

43=P170,16,CM2:2,0

44=P170,16,CM2:2,0

45=P170,16,CM2:2,0

46=P170,16,CM2:2,0

//47=P170,16,CM2:2,0

//48=P170,16,CM2:2,0

49=P170,17,CM2:2,0

50=P170,17,CM2:2,0

51=P170,17,CM2:2,0

52=P170,17,CM2:2,0

53=P170,17,CM2:2,0

54=P170,17,CM2:1,0

//55=P170,17,CM2:2,0

//56=P170,17,CM2:2,0

The DH MDA rotary works OK, but when I push it, it comands the banking angle positions of the heading AP system, is that correct ?

Yes, that how I have configured it since I use FS2Crew alot. You can change lines 139,140,143,144 to assign something else to it if you wish.

Did you make other profiles such as for the PDMG B747, Wilco B737 or Capt Sim B757/767 ?.-

No, I dont fly those planes.

Link to comment
Share on other sites

  • 2 months later...

Hi,

I posted in the Level D forum, but I noticed that those posts were 2 years old. These posts seem more up to date.

I am having a hell of time trying to get the GF EFIS to work with my 767. I pasted and did as Steve instructed but no joy. I pasted this in my FSIUPC config in the modules folder in FSX, this what it looks like,

[buttons]

1=P2,4,K65,9

2=P2,1,K190,10

3=P0,1,K74,10

4=P1,1,K51,9

ButtonRepeat=20,10

9=P158,7,C65585,0

10=P1,0,K80,9

11=P1,2,K50,8

12=P1,4,K49,8

13=P2,8,K74,10

14=P2,9,K69,9

15=R1,11,K69,10

16=P1,10,K112,11

17=P1,8,C66477,0

19=P1,5,C66391,0

20=P1,3,C66390,0

21=R1,7,C65607,0

22=R1,6,C65615,0

25=H64,1,K101,10

26=P64,2,K56,10

28=P64,3,K56,10

29=P64,0,K101,10

31=P64,4,K99,10

32=P64,5,K101,10

33=P64,6,K100,10

34=P64,8,K97,10

35=P64,9,K96,10

36=P64,10,K96,10

///37=P170,30,K68,8

///38=P170,31,K68,12

[MacroFiles]

2=LVLD767

[buttons.Level D Simulations B767-300ER ]

7=P170,21,CM2:5,0

8=P170,21,CM2:5,0

9=P170,21,CM2:5,0

10=P170,21,CM2:5,0

11=P170,21,CM2:5,0

12=P170,21,CM2:4,0

13=P170,20,CM2:5,0

14=P170,20,CM2:5,0

15=P170,20,CM2:5,0

16=P170,20,CM2:5,0

17=P170,20,CM2:5,0

18=P170,22,CM2:5,0

19=P170,22,CM2:5,0

20=P170,22,CM2:5,0

21=P170,22,CM2:5,0

22=P170,22,CM2:5,0

23=P170,22,CM2:4,0

24=P170,22,CM2:4,0

25=P170,23,CM2:5,0

26=P170,23,CM2:5,0

27=P170,23,CM2:5,0

28=P170,23,CM2:5,0

29=P170,23,CM2:5,0

30=P170,23,CM2:4,0

31=P170,23,CM2:4,0

32=P170,23,CM2:4,0

33=P170,24,CM2:5,0

34=P170,24,CM2:5,0

35=P170,24,CM2:5,0

36=P170,24,CM2:5,0

37=P170,24,CM2:5,0

38=P170,24,CM2:4,0

39=P170,24,CM2:4,0

40=P170,24,CM2:4,0

41=P170,24,CM2:4,0

42=P170,16,CM2:1,0

43=P170,16,CM2:1,0

44=P170,16,CM2:1,0

45=P170,16,CM2:1,0

46=P170,16,CM2:1,0

47=P170,16,CM2:2,0

48=P170,16,CM2:2,0

49=P170,17,CM2:1,0

50=P170,17,CM2:1,0

51=P170,17,CM2:1,0

52=P170,17,CM2:1,0

53=P170,17,CM2:1,0

54=P170,17,CM2:2,0

55=P170,17,CM2:2,0

56=P170,17,CM2:2,0

57=P170,18,CM2:1,0

58=P170,18,CM2:1,0

59=P170,18,CM2:1,0

60=P170,18,CM2:1,0

61=P170,18,CM2:1,0

62=P170,18,CM2:2,0

63=P170,19,CM2:1,0

64=P170,19,CM2:1,0

65=P170,19,CM2:1,0

66=P170,19,CM2:1,0

67=P170,19,CM2:1,0

68=P170,9,CM2:6,0

69=P170,8,CM2:6,0

70=P170,11,CM2:7,0

71=P170,10,CM2:7,0

72=P170,28,CM2:10,0

73=P170,29,CM2:11,0

74=P170,30,CM2:8,0

75=P170,31,CM2:9,0

76=P170,5,CM2:12,0

77=P170,4,CM2:15,0

78=P170,3,CM2:13,0

79=P170,2,CM2:14,0

80=P170,1,CM2:16,0

96=P170,14,CM2:3,0

97=P170,15,CM2:36,0

98=P170,13,CM2:34,0

99=P170,12,CM2:35,0

100=P170,25,CM2:5,0

101=P170,25,CM2:5,0

102=P170,25,CM2:5,0

103=P170,25,CM2:5,0

104=P170,25,CM2:5,0

105=P170,25,CM2:4,0

106=P170,25,CM2:4,0

107=P170,25,CM2:4,0

108=P170,25,CM2:4,0

109=P170,25,CM2:4,0

Then, I made a text file in the modules folder titled "LVLD767.MCRO" and this is what is in that folder,

[Macros]

Module="B767main.GAU"

1=HSI+=RX30a0*X8bcc

2=HSI-=RX30c0*X8bcc

3=SETBUGS=RX3970*X8bcc

4=RANGE+=RX3060*Xa1cc

5=RANGE-=RX3080*Xa1cc

6=LEFTVORADF=RX7470*X83cc

7=RIGHTVORADF=RX74f0*X83cc

10=BARO+=RX3330*Xa1cc

11=BARO-=RX3250*Xa1cc

12=EFISNAV=RX2f50*Xa1cc

13=EFISARPT=RX2f90*Xa1cc

14=EFISDATA=RX2fd0*Xa1cc

15=EFISWPT=RX3010*Xa1cc

16=EFISTCAS=RX30e0*Xa1cc

27=THRUSTTEMP+=RX6f50*Xa1cc

28=THRUSTTEMP-=RX6df0*X55cc

34=ENGINEDISPLAY=RX1d60*Xa1cc

35=STATUSDISPLAY=RX1d90*Xa1cc

37=CLOCKRUN=RX2850*Xa100

38=CLOCKHOLD=RX2890*Xa1cc

39=CLOCKRESET=RX2820*Xa1cc

40=CHRTOGGLE=RX27b0*Xddcc

Module1="B767pedestal.GAU"

8=DH+=R1:X4540*Xa1cc

9=DH-=R1:X44d0*Xa1cc

Module2="B767Afds.GAU"

17=NAVMIN+=R2:X2130*Xa1cc

18=NAVMIN-=R2:X21d0*Xa1cc

19=NAVMJR+=R2:X2030*Xa1cc

20=NAVMJR-=R2:X2070*Xa1cc

23=AUTOBRAKES-

23.1=R3:Xf330*X8bcc

23.2=R2:X1f00*Xa1cc

24=AUTOBRAKES+

24.1=R3:Xf330*X8bcc,31

24.2=R2:X1ed0*Xa1cc

25=ALTNFLAPS+=R2:X1bb0*Xa1cc

26=ALTNFLAPS-=R2:X1b60*Xa1cc

33=FOVORDME=R2:X22c0*X6acc

36=CAUTIONCANCEL=R2:X1d30*X56cc

41=GOAROUND=R2:Xdeb0*X55cc

None of the buttons, switches or knobs do anything. Just got the unit this am and it is 11:00 pm now. I have been messing with this all day. In fact, I am possesed! I have been going over and over and I cannot see what is wrong.

If you can take the time to look over my data and see if you can find what is wrong it will be very much appreciated.

I am running Vista HP 32 bits, UAC off, FSUIPC 4.5 registered, and have the latest driver from Goflight 1.93 build 20, FSX with SP1 & 2 and the latest update from Level D

Thanks,

Gnacino

Link to comment
Share on other sites

I pasted and did as Steve instructed but no joy. I pasted this in my FSIUPC config in the modules folder in FSX, this what it looks like,

Pasting someone else's assignments for things like buttons and macros rarely works, because the joystick and button numbers will not be the same on your PC, and nor will the Macro numbers.

For instance, though you say "None of the buttons, switches or knobs do anything", these entries:

1=P2,4,K65,9

2=P2,1,K190,10

3=P0,1,K74,10

4=P1,1,K51,9

10=P1,0,K80,9

11=P1,2,K50,8

12=P1,4,K49,8

13=P2,8,K74,10

14=P2,9,K69,9

15=R1,11,K69,10

16=P1,10,K112,11

17=P1,8,C66477,0

19=P1,5,C66391,0

20=P1,3,C66390,0

21=R1,7,C65607,0

22=R1,6,C65615,0

25=H64,1,K101,10

26=P64,2,K56,10

28=P64,3,K56,10

29=P64,0,K101,10

31=P64,4,K99,10

32=P64,5,K101,10

33=P64,6,K100,10

34=P64,8,K97,10

35=P64,9,K96,10

36=P64,10,K96,10

are dependent on YOUR specific joystick and button numbers, or, in the case of 64, a software driver such as the one for PFC equipment.

Best to make your own, correct, assignments, via the FSUIPC options "Buttons and Switches" tab!

As for these:

[MacroFiles]

2=LVLD767

[buttons.Level D Simulations B767-300ER ]

7=P170,21,CM2:5,0

et cetera, did you check that the EFIS registered as Joystick 170? And the name of the aircraft "Level D Simulations B767-300ER " -- are you sure there should be a space at the end? FSUIPC normally removes trailing spaces. Best in any case to use the substring facility for aircraft names.

I am running Vista HP 32 bits, UAC off, FSUIPC 4.5 registered

er ... FSUIPC 4.5? Phew! That's two years old! Sorry I cannot support such an old version. The OLDEST supported version for FSX is 4.60, which has been available now for many months . Please ALWAYS check you are using a current version before asking for Support. It really isn't possible to deal with old versions. Even 4.60 is pretty old now -- there's a version 4.651 in the Download Links subforum, soon to be released as 4.70 and superseding 4.60.

Pete

Link to comment
Share on other sites

  • 2 months later...

I have just spent some time and sorted this out for you. Change the line numbers 42 through to 56 with the following:

42=P170,16,CM2:2,0

43=P170,16,CM2:2,0

44=P170,16,CM2:2,0

45=P170,16,CM2:2,0

46=P170,16,CM2:2,0

//47=P170,16,CM2:2,0

//48=P170,16,CM2:2,0

49=P170,17,CM2:2,0

50=P170,17,CM2:2,0

51=P170,17,CM2:2,0

52=P170,17,CM2:2,0

53=P170,17,CM2:2,0

54=P170,17,CM2:1,0

//55=P170,17,CM2:2,0

//56=P170,17,CM2:2,0

Yes, that how I have configured it since I use FS2Crew alot. You can change lines 139,140,143,144 to assign something else to it if you wish.

No, I dont fly those planes.

My GoFlight EFIS works OK with the LevelD B 737, but now I have problems with throttles, when I takeoff manually, they perform erratically, sometimes going to minimuns, and sometimes one lever stays at maximun while the other goes to minimun.- I have no problems with other aircraft, and as I saved a backup of my former .ini, I replaced it and the problems dissapeared, so obviously the issue is due to the modifications made in it.- I have my controls disabled in FSX, and FSUIPC managing them, I am using CH quadrant, pedals and yoke in Windows 7 64.-

Any opinion will be welcome

Thanks

This is the contents of my .ini

[General]

UpdatedByVersion=4645

History=5DB1GX85PGSC9UH671UFB

TCASid=Flight

TCASrange=40

AxisCalibration=No

DirectAxesToCalibs=No

ShowMultilineWindow=Yes

SuppressSingleline=No

SuppressMultilineFS=No

AxisIntercepts=No

DontResetAxes=No

WeatherReadFactor=2

WeatherRewriteSeconds=1

CustomWeatherModify=No

SimConnectStallTime=1

MouseWheelTrim=No

MouseWheelTrimSpeed=1

JoystickTimeout=15

FixControlAccel=Yes

FixMachSpeedBug=No

VisibilityOptions=No

OneCloudLayer=No

CloudTurbulence=No

CloudIcing=No

GenerateCirrus=Yes

SuppressCloudTurbulence=No

MaxIce=-4

MinIce=-4

UpperWindGusts=No

SuppressWindTurbulence=No

SuppressWindVariance=No

WindTurbulence=Yes

TurbulenceRate=1.0,5.0

TurbulenceDivisor=20,20,40,40

SuppressAllGusts=No

MaxSurfaceWind=0

WindLimitLevel=200

WindDiscardLevel=400

WindAjustAltitude=No

WindAjustAltitudeBy=2000

SmoothBySimTime=No

WindSmoothing=No

WindSmoothness=2

WindSmoothAirborneOnly=Yes

PressureSmoothness=0

TemperatureSmoothness=0

DisconnTrimForAP=No

ZeroElevForAPAlt=No

ThrottleSyncAll=No

WhiteMessages=No

ShowPMcontrols=No

SpoilerIncrement=512

MagicBattery=No

RudderSpikeRemoval=No

ElevatorSpikeRemoval=No

AileronSpikeRemoval=No

ReversedElevatorTrim=No

ClockSync=No

ClockSyncMins=5

ClearWeatherDynamics=No

OwnWeatherChanges=No

TimeForSelect=4

LoadFlightMenu=No

LoadPlanMenu=No

PauseAfterCrash=No

BrakeReleaseThreshold=75

SaveDataWithFlights=No

ZapSound=firework

ShortAircraftNameOk=Substring

UseProfiles=Yes

Console=No

PollGFTQ6=Yes

BlankDisplays=No

GetNearestAirports=No

LuaRerunDelay=66

[JoyNames]

AutoAssignLetters=No

0=CH PRO PEDALS USB

0.GUID={631A6290-C9A3-11DF-8001-444553540000}

1=CH THROTTLE QUADRANT

1.GUID={631A6290-C9A3-11DF-8002-444553540000}

2=CH FLIGHT SIM YOKE USB

2.GUID={631A89A0-C9A3-11DF-8003-444553540000}

[WideServer]

WideFSenabled=Yes

[buttons]

ButtonRepeat=20,10

1=P1,0,K54,8

2=P1,1,K55,8

3=P1,4,K52,9

4=P1,5,K90,8

5=P1,7,K191,9

6=P1,8,K82,9

7=P1,9,K90,8

8=P1,10,K117,8

9=P1,11,K118,8

10=P2,4,K121,8

11=P2,5,K120,8

12=P2,7,K122,8

13=R2,10,K36,8

14=R2,11,K35,8

15=R2,8,K13,9

16=R2,9,K8,9

17=P2,1,K190,10

18=R2,3,K135,10

19=R2,2,K45,10

[AutoSave]

AutoSaveEnabled=No

[GPSout]

GPSoutEnabled=No

Port=COM0

Speed=4800

Interval=2000

PosTo6Decimal=No

Sentences=

[GPSout2]

GPSoutEnabled=No

Port=<none set>

Speed=4800

Interval=2000

PosTo6Decimal=No

Sentences=

[Axes]

0=0X,256,D,7,40,0,0

1=0Y,256,D,8,0,0,0

2=0Z,256,D,3,40,0,0

3=1X,256,D,9,0,0,0

4=1Y,256,D,10,0,0,0

5=1R,256,D,42,0,0,0

6=1V,256,D,41,0,0,0

7=2X,256,D,1,38,0,0

8=2Y,256,D,2,39,0,0

9=2Z,256,D,4,0,0,0

10=2U,256,D,6,0,0,0

11=2V,256,D,5,0,0,0

12=2P,0,F,66416,0,0,0

[JoystickCalibration]

AllowSuppressForPFCquad=Yes

ExcludeThrottleSet=Yes

ExcludeMixtureSet=Yes

ExcludePropPitchSet=Yes

SepRevsJetsOnly=No

ApplyHeloTrim=No

UseAxisControlsForNRZ=No

FlapsSetControl=0

FlapDetents=No

ReverserControl=66292

Reverser1Control=66422

Reverser2Control=66425

Reverser3Control=66428

Reverser4Control=66431

MaxThrottleForReverser=256

AileronTrimControl=66731

RudderTrimControl=66732

CowlFlaps1Control=66162

CowlFlaps2Control=66163

CowlFlaps3Control=66164

CowlFlaps4Control=66165

SteeringTillerControl=0

MaxSteerSpeed=60

Aileron=-16253,-520,-520,15744

Elevator=-15213,-1430,-1430,16128

Rudder=-16384,0,0,16256

Throttle=-16384,16383

PropPitch=-16384,16383

Mixture=-16253,16383

LeftBrake=-16384,15616/16

RightBrake=-16253,16383/16

Reverser1=-16384,14848

Reverser2=-16384,14848

Reverser3=-16384,14208

Reverser4=-16384,14208

Spoilers=-16380,16380/16

SyncSlopeThrottle3=26/26

PropPitch1=-16384,-16384,0,14720

PropPitch2=-16384,-16384,512,16383

Throttle1=-16253,-10532,512,14208

Throttle2=-16384,-8842,512,15232

Throttle3=-16384,-512,512,14720

Throttle4=-16384,-512,512,16383

[Profile.Jets]

1=PMDG

2=FeelThere Boeing

3=Learjet 45

4=Level D Simulations B767-300ER

5=Commercial Level

6=Boeing 737-800

7=Boeing 747-400

8=Bombardier CRJ 700

9=CS 727-200

10=CS 727-100

11=Captain Sim 757-200

11=CS 767-300

12=Boeing 777-223ER

13=CS 767-300

14=CS 767 Captain AWACS

15=MS-760_AAF

16=LSH MD-82

17=Super 80 Professional

18=Eaglesoft Citation

19=PIC Citation X

20=jf_A320-211 CFM56

21=jf_A320-232_IAE

22=Airbus A321

23=A330-200

24=Feelthere A340-300 Airbus

25=Feelthere A340-600 Airbus

26=CS_B707-300

27=Concorde

28=Embraer 175

29=Embraer 195

[Axes.Jets]

0=0X,256,D,7,0,0,0

1=0Y,256,D,8,0,0,0

2=0Z,256,D,3,40,0,0

3=1X,256,D,9,0,0,0

4=1Y,256,D,10,0,0,0

5=1Z,256,D,11,0,0,0

6=1R,256,D,43,44,0,0

7=1U,256,D,12,0,0,0

8=1V,256,D,41,42,0,0

9=2X,256,D,1,38,0,0

10=2Y,256,D,2,39,0,0

11=2U,256,D,22,0,0,0

12=2P,0,F,66416,0,0,0

[Profile.Prop Twin]

1=FSD Panther

2=RealAir Beech Duke

3=Beech Baron

4=PA-34 SENECA II

5=FSD Navajo Flair

6=Douglas DC-3

7=RealAir Beech Duke

8=IA-35 Huanquero

9=Piper PA-44 Seminole

10=Navajo

11=Eaglesoft Piper TC

[Axes.Prop Twin]

0=0X,256,D,7,40,0,0

1=0Y,256,D,8,0,0,0

2=0Z,256,D,3,40,0,0

3=1X,256,D,9,0,0,0

4=1Y,256,D,10,0,0,0

5=1Z,256,D,17,0,0,0

6=1R,256,D,14,0,0,0

7=1U,256,D,18,0,0,0

8=1V,256,D,13,0,0,0

9=2X,256,D,1,38,0,0

10=2Y,256,D,2,39,0,0

11=2Z,256,D,4,0,0,0

12=2U,256,D,6,0,0,0

13=2V,256,D,5,0,0,0

14=2P,0,F,66416,0,0,0

[Profile.Turboprop BAE]

1=PMDG J-41

[Axes.Turboprop BAE]

0=0X,256,D,7,40,0,0

1=0Y,256,D,8,0,0,0

2=0Z,256,D,3,40,0,0

3=1X,256,D,9,0,0,0

4=1Y,256,D,10,0,0,0

5=1R,256,D,18,0,0,0

6=1V,256,D,17,0,0,0

7=2X,256,D,1,38,0,0

8=2Y,256,D,2,39,0,0

9=2Z,256,D,4,0,0,0

10=2U,256,D,6,0,0,0

11=2V,256,D,5,0,0,0

12=2P,0,F,66416,0,0,0

[JoystickCalibration.Turboprop BAE]

AllowSuppressForPFCquad=Yes

ExcludeThrottleSet=Yes

ExcludeMixtureSet=Yes

ExcludePropPitchSet=Yes

SepRevsJetsOnly=No

ApplyHeloTrim=No

FlapsSetControl=0

FlapDetents=No

ReverserControl=66292

Reverser1Control=66422

Reverser2Control=66425

Reverser3Control=66428

Reverser4Control=66431

MaxThrottleForReverser=256

AileronTrimControl=66731

RudderTrimControl=66732

CowlFlaps1Control=66162

CowlFlaps2Control=66163

CowlFlaps3Control=66164

CowlFlaps4Control=66165

SteeringTillerControl=0

MaxSteerSpeed=60

Aileron=-16253,-520,-520,15744

Elevator=-15213,-1430,-1430,16128

Rudder=-16384,-130,-130,16128

Throttle=-16384,16383

PropPitch=-16384,16383

Mixture=-16253,16383

LeftBrake=-16384,15616/16

RightBrake=-16253,16383/16

Throttle1=-16384,-11963,512,14208

Throttle2=-16384,-8582,512,15232

Throttle3=-16384,-512,512,14720

Throttle4=-16384,-512,512,16383

PropPitch1=-16384,-16384,-16384,14848

PropPitch2=-16384,-16384,-16384,14208

Spoilers=-16380,16380/16

Reverser1=-16384,14848

Reverser2=-16384,14848

Reverser3=-16384,14208

Reverser4=-16384,14208

UseAxisControlsForNRZ=No

SlopeRudder=15

[Profile.Turboprop Cheyenne]

1=Piper PA31T

2=Piper PA31T1

3=Piper PA31T2

4=de Havilland Canadian Twin Otter

[Axes.Turboprop Cheyenne]

0=0X,256,D,7,40,0,0

1=0Y,256,D,8,0,0,0

2=0Z,256,D,3,40,0,0

3=1X,256,D,9,0,0,0

4=1Y,256,D,10,0,0,0

5=1Z,256,D,17,0,0,0

6=1R,256,D,14,0,0,0

7=1U,256,D,18,0,0,0

8=1V,256,D,13,0,0,0

9=2X,256,D,1,38,0,0

10=2Y,256,D,2,39,0,0

11=2Z,256,D,4,0,0,0

12=2U,256,D,6,0,0,0

13=2V,256,D,5,0,0,0

14=2P,0,F,66416,0,0,0

[JoystickCalibration.Turboprop Cheyenne]

AllowSuppressForPFCquad=Yes

ExcludeThrottleSet=Yes

ExcludeMixtureSet=Yes

ExcludePropPitchSet=Yes

SepRevsJetsOnly=No

ApplyHeloTrim=No

FlapsSetControl=0

FlapDetents=No

ReverserControl=66292

Reverser1Control=66422

Reverser2Control=66425

Reverser3Control=66428

Reverser4Control=66431

MaxThrottleForReverser=256

AileronTrimControl=66731

RudderTrimControl=66732

CowlFlaps1Control=66162

CowlFlaps2Control=66163

CowlFlaps3Control=66164

CowlFlaps4Control=66165

SteeringTillerControl=0

MaxSteerSpeed=60

Aileron=-16253,-520,-520,15744

Elevator=-15213,-1430,-1430,16128

Rudder=-16384,0,0,16256

Throttle=-16384,16383

PropPitch=-16384,16383

Mixture=-16253,16383

LeftBrake=-16384,15616/16

RightBrake=-16253,16383/16

Throttle1=-16384,-11703,-512,14208

Throttle2=-16384,-11312,-512,15232

Throttle3=-16384,-512,512,14720

Throttle4=-16384,-512,512,16383

Mixture1=-16384,8192,8192,14976/32

Mixture2=-16384,8192,8192,14208/32

PropPitch1=-16384,-16384,-16384,14720

PropPitch2=-16384,-16384,-16384,14976

Spoilers=-16380,16380/16

Reverser1=-16384,14848

Reverser2=-16384,14848

Reverser3=-16384,14208

Reverser4=-16384,14208

UseAxisControlsForNRZ=No

[MacroFiles]

1=747 OHD

2=LVLD767

3=APchart

[JoystickCalibration.Jets]

AllowSuppressForPFCquad=Yes

ExcludeThrottleSet=Yes

ExcludeMixtureSet=Yes

ExcludePropPitchSet=Yes

SepRevsJetsOnly=No

ApplyHeloTrim=No

UseAxisControlsForNRZ=No

FlapsSetControl=0

FlapDetents=No

ReverserControl=66292

Reverser1Control=66422

Reverser2Control=66425

Reverser3Control=66428

Reverser4Control=66431

MaxThrottleForReverser=256

AileronTrimControl=66731

RudderTrimControl=66732

CowlFlaps1Control=66162

CowlFlaps2Control=66163

CowlFlaps3Control=66164

CowlFlaps4Control=66165

SteeringTillerControl=0

MaxSteerSpeed=60

Aileron=-16253,-520,-520,15744

Elevator=-15213,-1430,-1430,16128

Rudder=-16384,0,0,16256

Throttle=-16384,16383

PropPitch=-16384,16383

Mixture=-16253,16383

LeftBrake=-16384,15616/16

RightBrake=-16253,16383/16

Throttle1=-16384,-512,512,14208/32

Throttle2=-16253,-512,512,15360/32

Throttle3=-16384,-512,512,14720/32

SyncSlopeThrottle3=26/26,33/33,44/47,62/66,85/86,104/104,127/128

Throttle4=-16384,-512,512,14848/32

PropPitch1=-16384,-16384,0,14720

PropPitch2=-16384,-16384,512,16383

Spoilers=-16380,16380/16

Reverser1=-16384,14848

Reverser2=-16384,14848

Reverser3=-16384,14208

Reverser4=-16384,14208

SyncSlopeThrottle4=26/33,30/47,53/66,81/86,109/104,127/128

SlopeLeftBrake=15

SlopeRightBrake=15

[JoystickCalibration.Prop Twin]

AllowSuppressForPFCquad=Yes

ExcludeThrottleSet=Yes

ExcludeMixtureSet=Yes

ExcludePropPitchSet=Yes

SepRevsJetsOnly=No

ApplyHeloTrim=No

UseAxisControlsForNRZ=No

FlapsSetControl=0

FlapDetents=No

ReverserControl=66292

Reverser1Control=66422

Reverser2Control=66425

Reverser3Control=66428

Reverser4Control=66431

MaxThrottleForReverser=256

AileronTrimControl=66731

RudderTrimControl=66732

CowlFlaps1Control=66162

CowlFlaps2Control=66163

CowlFlaps3Control=66164

CowlFlaps4Control=66165

SteeringTillerControl=0

MaxSteerSpeed=60

Aileron=-16253,-520,-520,15744

Elevator=-14043,-260,-260,16256

Rudder=-16384,0,0,16256

Throttle=-16384,16383

PropPitch=-16384,16383

Mixture=-16253,16383

LeftBrake=-16384,15616/16

RightBrake=-16253,16383/16

Throttle1=-16384,-512,512,14208/40

Throttle2=-16384,-512,512,15360/40

SyncSlopeThrottle2=26/26

Throttle3=-16384,-512,512,14720/32

SyncSlopeThrottle3=26/26

Throttle4=-16384,-512,512,16383/32

PropPitch1=-16384,-16384,0,14720

PropPitch2=-16384,-16384,512,16383

Spoilers=-16380,16380/16

Reverser1=-16384,14848

Reverser2=-16384,14848

Reverser3=-16384,14208

Reverser4=-16384,14208

[Profile.Turboprop ATR]

1=Flight 1 ATR 72-500

[Axes.Turboprop ATR]

0=0X,256,D,7,40,0,0

1=0Y,256,D,8,0,0,0

2=0Z,256,D,3,40,0,0

3=1X,256,D,9,0,0,0

4=1Y,256,D,10,0,0,0

5=1Z,256,D,17,0,0,0

6=1R,256,F,14,0,0,0

7=1U,256,D,18,0,0,0

8=1V,256,D,13,0,0,0

9=2X,256,D,1,38,0,0

10=2Y,256,D,2,39,0,0

11=2Z,256,D,4,0,0,0

12=2U,256,D,6,0,0,0

13=2V,256,D,5,0,0,0

14=2P,0,F,66416,0,0,0

[sounds]

Path=E:\FS10\Sound\

Device1=Controlador primario de sonido

Device2=Altavoces (SoundMAX Integrated Digital HD Audio)

Device3=Interfaz SPDIF (SoundMAX Integrated Digital HD Audio)

[Window.Radar Contact]

Docked=242, 2813, 3548, 30

[buttons.Level D Simulations B767-300ER]

7=P170,21,CM2:5,0

8=P170,21,CM2:5,0

9=P170,21,CM2:5,0

10=P170,21,CM2:5,0

11=P170,21,CM2:5,0

12=P170,21,CM2:4,0

13=P170,20,CM2:5,0

14=P170,20,CM2:5,0

15=P170,20,CM2:5,0

16=P170,20,CM2:5,0

17=P170,20,CM2:5,0

18=P170,22,CM2:5,0

19=P170,22,CM2:5,0

20=P170,22,CM2:5,0

21=P170,22,CM2:5,0

22=P170,22,CM2:5,0

23=P170,22,CM2:4,0

24=P170,22,CM2:4,0

25=P170,23,CM2:5,0

26=P170,23,CM2:5,0

27=P170,23,CM2:5,0

28=P170,23,CM2:5,0

29=P170,23,CM2:5,0

30=P170,23,CM2:4,0

31=P170,23,CM2:4,0

32=P170,23,CM2:4,0

33=P170,24,CM2:5,0

34=P170,24,CM2:5,0

35=P170,24,CM2:5,0

36=P170,24,CM2:5,0

37=P170,24,CM2:5,0

38=P170,24,CM2:4,0

39=P170,24,CM2:4,0

40=P170,24,CM2:4,0

41=P170,24,CM2:4,0

42=P170,16,CM2:2,0

43=P170,16,CM2:2,0

44=P170,16,CM2:2,0

45=P170,16,CM2:2,0

46=P170,16,CM2:2,0

//47=P170,16,CM2:2,0

//48=P170,16,CM2:2,0

49=P170,17,CM2:2,0

50=P170,17,CM2:2,0

51=P170,17,CM2:2,0

52=P170,17,CM2:2,0

53=P170,17,CM2:2,0

54=P170,17,CM2:1,0

//55=P170,17,CM2:2,0

//56=P170,17,CM2:2,0

57=P170,18,CM2:1,0

58=P170,18,CM2:1,0

59=P170,18,CM2:1,0

60=P170,18,CM2:1,0

61=P170,18,CM2:1,0

62=P170,18,CM2:2,0

63=P170,19,CM2:1,0

64=P170,19,CM2:1,0

65=P170,19,CM2:1,0

66=P170,19,CM2:1,0

67=P170,19,CM2:1,0

68=P170,9,CM2:6,0

69=P170,8,CM2:6,0

70=P170,11,CM2:7,0

71=P170,10,CM2:7,0

//72=P170,28,CM2:10,0

//73=P170,29,CM2:11,0

//74=P170,30,CM2:8,0

//75=P170,31,CM2:9,0

74=P170,1,CM2:56,0

76=P170,5,CM2:12,0

77=P170,4,CM2:15,0

78=P170,3,CM2:13,0

79=P170,2,CM2:14,0

81=P174,10,CM2:17,0

82=P174,9,CM2:18,0

83=P174,11,CM2:19,0

84=P174,8,CM2:20,0

95=P174,0,CM2:33,0

//96=P170,14,CM2:3,0

98=P170,13,CM2:34,0

99=P170,12,CM2:35,0

100=P170,25,CM2:5,0

101=P170,25,CM2:5,0

102=P170,25,CM2:5,0

103=P170,25,CM2:5,0

104=P170,25,CM2:5,0

105=P170,25,CM2:4,0

106=P170,25,CM2:4,0

107=P170,25,CM2:4,0

108=P170,25,CM2:4,0

109=P170,25,CM2:4,0

112=P101,7,CM2:41,0

113=P109,5,CM2:37,0

114=U109,5,CM2:39,0

118=P101,9,CM2:43,0

120=P170,0,CM2:54,0

121=P1,6,K54,9

122=P1,5,K55,9

123=P1,4,K53,9

124=P101,15,CM2:41,0

125=P170,15,C1005,43535

126=CP(F+170,15)170,28,CM2:49,0

127=CP(F+170,15)170,29,CM2:50,0

128=CP(F-170,15)170,28,CM2:10,0

129=CP(F-170,15)170,29,CM2:11,0

130=CU(F+170,15)170,28,CM2:49,0

131=CU(F+170,15)170,29,CM2:50,0

132=CU(F-170,15)170,28,CM2:10,0

133=CU(F-170,15)170,29,CM2:11,0

134=P170,6,CM2:16,0

//135=U170,31,CM2:9,0

//136=U170,30,CM2:8,0

137=P173,0,CM2:3,0

138=P170,14,C1005,43535

139=CP(F+170,14)170,30,CM2:51,0

140=CP(F+170,14)170,31,CM2:52,0

141=CP(F-170,14)170,30,CM2:8,0

142=CP(F-170,14)170,31,CM2:9,0

143=CU(F+170,14)170,30,CM2:51,0

144=CU(F+170,14)170,31,CM2:52,0

145=CU(F-170,14)170,30,CM2:8,0

146=CU(F-170,14)170,31,CM2:9,0

151=P0,18,K53,9

152=P0,19,K54,9

153=P0,16,CM2:45,0

155=P165,2,CM2:53,0

156=P165,1,CM2:3,0

163=P0,14,K87,11

167=P158,14,CL23:R,0

168=U158,14,CL23:K,0

169=P0,15,K75,11

170=R169,1,C66635,0

171=U169,1,C65967,0

172=R169,2,C66636,0

173=U169,2,C65972,0

174=P0,17,C65876,0

[Profile.Level D Simulations B767-300ER]

1=Level D Simulations B767-300ER

[JoystickCalibration.Level D Simulations B767-300ER]

AllowSuppressForPFCquad=Yes

ExcludeThrottleSet=Yes

ExcludeMixtureSet=Yes

ExcludePropPitchSet=Yes

SepRevsJetsOnly=No

ApplyHeloTrim=No

UseAxisControlsForNRZ=No

FlapsSetControl=0

FlapDetents=No

ReverserControl=66292

Reverser1Control=66422

Reverser2Control=66425

Reverser3Control=66428

Reverser4Control=66431

MaxThrottleForReverser=256

AileronTrimControl=66731

RudderTrimControl=66732

CowlFlaps1Control=66162

CowlFlaps2Control=66163

CowlFlaps3Control=66164

CowlFlaps4Control=66165

SteeringTillerControl=0

MaxSteerSpeed=60

Aileron=-16253,-520,-520,15744

Elevator=-15213,-1430,-1430,16128

Rudder=-16384,0,0,16256

Throttle=-16384,16383

PropPitch=-16384,16383

Mixture=-16253,16383

LeftBrake=-16384,15616/16

RightBrake=-16253,16383/16

Throttle1=-16253,-512,512,14336/32

Throttle2=-16384,-512,512,15360/32

Throttle3=-16384,-512,512,14720/32

SyncSlopeThrottle3=26/26

Throttle4=-16384,-512,512,16383/32

PropPitch1=-16384,-16384,0,14720

PropPitch2=-16384,-16384,512,16383

Spoilers=-16380,16380/16

Reverser1=-16384,14848

Reverser2=-16384,14208

Reverser3=-16384,14208

Reverser4=-16384,14208

Link to comment
Share on other sites

My GoFlight EFIS works OK with the LevelD B 737, but now I have problems with throttles, when I takeoff manually, they perform erratically, sometimes going to minimuns, and sometimes one lever stays at maximun while the other goes to minimun.- I have no problems with other aircraft, and as I saved a backup of my former .ini, I replaced it and the problems dissapeared, so obviously the issue is due to the modifications made in it.

So, a comparison of the two INI files would prove very helpful, would it not? A much easier way to diagnose the problem than trying to work out which bits of the INI you supplied applies to that aircraft?

Isolating just those lines rleevant to Throttle axis assignments and calibrations, you have:

1=CH THROTTLE QUADRANT

1.GUID={631A6290-C9A3-11DF-8002-444553540000}

So the Throttle is joystick #1.

2=CH FLIGHT SIM YOKE USB

2.GUID={631A89A0-C9A3-11DF-8003-444553540000}

Doesn't the yoke also have a throttle mounted on it? I seem to remember, aeons ago, my CH yoke having one, on top.

[Axes]

3=1X,256,D,9,0,0,0

4=1Y,256,D,10,0,0,0

5=1R,256,D,42,0,0,0

6=1V,256,D,41,0,0,0

Those are Throttle 1 and 2 and Reversers 1 and 2.

[JoystickCalibration]

Throttle=-16384,16383

Throttle1=-16253,-10532,512,14208

Throttle2=-16384,-8842,512,15232

Seems okay except you have the default throttle calibrated too? Best press "Reset" on that.

[Profile.Jets]

1=PMDG

2=FeelThere Boeing

3=Learjet 45

4=Level D Simulations B767-300ER

5=Commercial Level

6=Boeing 737-800

7=Boeing 747-400

8=Bombardier CRJ 700

9=CS 727-200

10=CS 727-100

11=Captain Sim 757-200

11=CS 767-300

12=Boeing 777-223ER

13=CS 767-300

14=CS 767 Captain AWACS

15=MS-760_AAF

16=LSH MD-82

17=Super 80 Professional

18=Eaglesoft Citation

19=PIC Citation X

20=jf_A320-211 CFM56

21=jf_A320-232_IAE

22=Airbus A321

23=A330-200

24=Feelthere A340-300 Airbus

25=Feelthere A340-600 Airbus

26=CS_B707-300

27=Concorde

28=Embraer 175

29=Embraer 195

You have a ***LOT*** of aircraft categorised in your "Jets" profile! And these are all fine with the throttles? Which here will your LevelD B 737 match to? Or have you not assigned it to a Profile? We'd need to know to understand which calibration is appropriate.

Also, you appear to have "Level D Simulations B767-300ER" listed as a Jets profile aircraft whilst also having a separate Profile for it too:

[Profile.Level D Simulations B767-300ER]

1=Level D Simulations B767-300ER

[JoystickCalibration.Level D Simulations B767-300ER]

[buttons.Level D Simulations B767-300ER]

To be honest, I'm not sure which of the two assignments will take priority in such a case.

However, carrying on:

[Axes.Jets]

3=1X,256,D,9,0,0,0

4=1Y,256,D,10,0,0,0

5=1Z,256,D,11,0,0,0

6=1R,256,D,43,44,0,0

7=1U,256,D,12,0,0,0

8=1V,256,D,41,42,0,0

That's the Jets profile 4 throttles and 4 reversers.

[JoystickCalibration.Jets]

Throttle=-16384,16383

Throttle1=-16384,-512,512,14208/32

Throttle2=-16253,-512,512,15360/32

Throttle3=-16384,-512,512,14720/32

SyncSlopeThrottle3=26/26,33/33,44/47,62/66,85/86,104/104,127/128

Throttle4=-16384,-512,512,14848/32

Reverser1=-16384,14848

Reverser2=-16384,14848

Reverser3=-16384,14208

Reverser4=-16384,14208

SyncSlopeThrottle4=26/33,30/47,53/66,81/86,109/104,127/128

SlopeLeftBrake=15

SlopeRightBrake=15

You appear to have the default throttle calibrated too. Best to "Reset" that.

Not sure why you sre Synching throttles 3 and 4 but not 2. Is it because they are behaving very differently?

Anyway, there's nothing i can see here which would mess up only ONE "Jets" profile aircraft and not the others, assunming your 737 fits as one of those listed.

Looks like a comparison with your older but working INI is necessary.

Regards

Pete

Link to comment
Share on other sites

So, a comparison of the two INI files would prove very helpful, would it not? A much easier way to diagnose the problem than trying to work out which bits of the INI you supplied applies to that aircraft?

Isolating just those lines rleevant to Throttle axis assignments and calibrations, you have:

1=CH THROTTLE QUADRANT

1.GUID={631A6290-C9A3-11DF-8002-444553540000}

So the Throttle is joystick #1.

2=CH FLIGHT SIM YOKE USB

2.GUID={631A89A0-C9A3-11DF-8003-444553540000}

Doesn't the yoke also have a throttle mounted on it? I seem to remember, aeons ago, my CH yoke having one, on top.

[Axes]

3=1X,256,D,9,0,0,0

4=1Y,256,D,10,0,0,0

5=1R,256,D,42,0,0,0

6=1V,256,D,41,0,0,0

Those are Throttle 1 and 2 and Reversers 1 and 2.

[JoystickCalibration]

Throttle=-16384,16383

Throttle1=-16253,-10532,512,14208

Throttle2=-16384,-8842,512,15232

Seems okay except you have the default throttle calibrated too? Best press "Reset" on that.

[Profile.Jets]

1=PMDG

2=FeelThere Boeing

3=Learjet 45

4=Level D Simulations B767-300ER

5=Commercial Level

6=Boeing 737-800

7=Boeing 747-400

8=Bombardier CRJ 700

9=CS 727-200

10=CS 727-100

11=Captain Sim 757-200

11=CS 767-300

12=Boeing 777-223ER

13=CS 767-300

14=CS 767 Captain AWACS

15=MS-760_AAF

16=LSH MD-82

17=Super 80 Professional

18=Eaglesoft Citation

19=PIC Citation X

20=jf_A320-211 CFM56

21=jf_A320-232_IAE

22=Airbus A321

23=A330-200

24=Feelthere A340-300 Airbus

25=Feelthere A340-600 Airbus

26=CS_B707-300

27=Concorde

28=Embraer 175

29=Embraer 195

You have a ***LOT*** of aircraft categorised in your "Jets" profile! And these are all fine with the throttles? Which here will your LevelD B 737 match to? Or have you not assigned it to a Profile? We'd need to know to understand which calibration is appropriate.

Also, you appear to have "Level D Simulations B767-300ER" listed as a Jets profile aircraft whilst also having a separate Profile for it too:

[Profile.Level D Simulations B767-300ER]

1=Level D Simulations B767-300ER

[JoystickCalibration.Level D Simulations B767-300ER]

[buttons.Level D Simulations B767-300ER]

To be honest, I'm not sure which of the two assignments will take priority in such a case.

However, carrying on:

[Axes.Jets]

3=1X,256,D,9,0,0,0

4=1Y,256,D,10,0,0,0

5=1Z,256,D,11,0,0,0

6=1R,256,D,43,44,0,0

7=1U,256,D,12,0,0,0

8=1V,256,D,41,42,0,0

That's the Jets profile 4 throttles and 4 reversers.

[JoystickCalibration.Jets]

Throttle=-16384,16383

Throttle1=-16384,-512,512,14208/32

Throttle2=-16253,-512,512,15360/32

Throttle3=-16384,-512,512,14720/32

SyncSlopeThrottle3=26/26,33/33,44/47,62/66,85/86,104/104,127/128

Throttle4=-16384,-512,512,14848/32

Reverser1=-16384,14848

Reverser2=-16384,14848

Reverser3=-16384,14208

Reverser4=-16384,14208

SyncSlopeThrottle4=26/33,30/47,53/66,81/86,109/104,127/128

SlopeLeftBrake=15

SlopeRightBrake=15

You appear to have the default throttle calibrated too. Best to "Reset" that.

Not sure why you sre Synching throttles 3 and 4 but not 2. Is it because they are behaving very differently?

Anyway, there's nothing i can see here which would mess up only ONE "Jets" profile aircraft and not the others, assunming your 737 fits as one of those listed.

Looks like a comparison with your older but working INI is necessary.

Regards

Pete

Thanks Pete for your quick reply

I am on work now, so I will send the older ini tonight.-

For now I can say:

The CH Flightsim Yoke has indeed its own throttle which works in my case only as a general setting with aircraft not included in special profiles.-

All aircraft included in my jets profile are fine with the throttles.-

The "Level D.Simulations B767-300ER" (which is efectively the problematic aircraft)is included in the original jet profiles, and in a second one with its own calibration lines.- I think it is so because after including in the ini all the related to Go Flight EFIS, as steveo38 gently sent to me, the throttle wasnt working and had to calibrate it again.-

As I noticed that also, I tried deleting both the redundant profile and calibrating lines, but no way, the problem continued.-

Link to comment
Share on other sites

I am on work now, so I will send the older ini tonight.

I really wanted you to do the comparison, not I. I already listed all the areas that have any relevance.

For now I can say:

The CH Flightsim Yoke has indeed its own throttle which works in my case only as a general setting with aircraft not included in special profiles.-

Okay. That shouldn't affect the Profile-specific aircraft, but it will affect aircraft not assigned to a Profile.

The "Level D.Simulations B767-300ER" (which is efectively the problematic aircraft) ...

Er, wait a minute. This is new. you explicitly said it was the LevelD B 737. so i've been looking in the wrong place all this time?

is included in the original jet profiles, and in a second one with its own calibration lines.- I think it is so because after including in the ini all the related to Go Flight EFIS, as steveo38 gently sent to me, the throttle wasnt working and had to calibrate it again.-

As I noticed that also, I tried deleting both the redundant profile and calibrating lines, but no way, the problem continued.-

Which settings do you want, the Jets profile ones or the 767 specific ones? If you want the latter just remove the 767 name in the [Profile.Jets] section. If you want it to abide by the Jets profile, delete all the sections with the 767 in the name.

Until you've done this and tested it there's no point in continuing.

Regards

Pete

Link to comment
Share on other sites

I really wanted you to do the comparison, not I. I already listed all the areas that have any relevance.

Okay. That shouldn't affect the Profile-specific aircraft, but it will affect aircraft not assigned to a Profile.

Er, wait a minute. This is new. you explicitly said it was the LevelD B 737. so i've been looking in the wrong place all this time?

Which settings do you want, the Jets profile ones or the 767 specific ones? If you want the latter just remove the 767 name in the [Profile.Jets] section. If you want it to abide by the Jets profile, delete all the sections with the 767 in the name.

Until you've done this and tested it there's no point in continuing.

Regards

Pete

[/quote

]

Pete

Sorry about the confusion about the 737, it was a silly mistake.-

I deleted the last Level D B767 profile and calibration section, reassigned axis of the throttle and reversers only, and calibrated them, and now it works OK.-

I didnt delete yet the B767 line at the jets profile, so it seems both profiles coexist without problems.- The new lines look like this:

[Profile.Level D Simulations B767-300ER]

1=Level D Simulations B767-300ER

[Axes.Level D Simulations B767-300ER]

0=0X,256,D,7,40,0,0

1=0Y,256,D,8,0,0,0

2=0Z,256,D,3,40,0,0

3=1X,256,D,9,0,0,0

4=1Y,256,D,10,0,0,0

5=1R,256,D,42,0,0,0

6=1V,256,D,41,0,0,0

7=2X,256,D,1,38,0,0

8=2Y,256,D,2,39,0,0

9=2Z,256,D,4,0,0,0

10=2U,256,D,6,0,0,0

11=2V,256,D,5,0,0,0

12=2P,0,F,66416,0,0,0

Thanks

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use. Guidelines Privacy Policy We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.