Jump to content
The simFlight Network Forums

Question about Profiles.


Recommended Posts

Hi Pete,

I couldn't see this issue referenced in the forum.

I am using Profiles, for the first time, they're cool! I am running FSUIPC v4.60a, registered. My thoughts were to create an FSX generic profile for single props, dual props, twin jets. Then make specific profiles for variations of -say- twin jets, for the likes of Level D's B763, which has the opportunity to do more with custom key assignments (more than the generic FSX stuff).

I created so far my generic single prop and dual jet, and am now trying to assign a new profile to the Level D B763 twin jet for the "Axis Assignment" tab. However, the checkbox for "Profile Specific?" is already checked and grayed out. The axis assignments appear to be the same as I set for the generic jet twin. (However, I am able to access the same checkbox on the "Buttons + Switches" tab.)

Is FSUIPC seeing somehow that the Level D B763 is a "twin jet", and so just grabbing the predefined assignment for "twin jet"? With no ability to cancel out of it and then create a customized dual jet one?

I hope I'm making sense here. If not, let me try again. :)

Thanks, Bruce.

Edit: I just tried the PMDG MD11, and am still getting the same issue above, where the FSUIPC Axis Assignment "Profile Specific" checkbox is checked and grayed out. Once again, the axis appears to be the twin jet one (just going by the mapping between my joystick (2) levers and the functions they are controlling. Is there perhaps a larger class of "jet" (regardless of engines) at play here perhaps? I will need to find a way to re-assign my joystick levers for the Tri-jet. Obviously, going back to a string of aircraft specific settings will work too. Thanks, Bruce.

Link to comment
Share on other sites

Is FSUIPC seeing somehow that the Level D B763 is a "twin jet", and so just grabbing the predefined assignment for "twin jet"? With no ability to cancel out of it and then create a customized dual jet one?

I'd need to see your INI file. It may be that you have short aircraft names matching some already assigned to profiles for the [Axes....] sections. Please just paste your INI file here and I'll see what is going on.

Is there perhaps a larger class of "jet" (regardless of engines) at play here perhaps?

No, FSUIPC doesn't try anything clever. It is all user-controlled, by names and assignments. The INI file will show.

Regards

Pete

Link to comment
Share on other sites

  • 1 year later...

Hello !

I've the same problem !

I've only created 2 profiles : "pmdg747" and "cessna152" with the yoke saitek.

I tried to create a profile with the FA18 of VRS, with a noname joystick but the checkbox remain grayed out. But I want to assign the throttle axis to my joystick with a specific profile to fa18.

I've assign the axis with my yoke Saitek without speficic profile, and again in the cessna's profile. But with the fa18 i want to use the other joystick.

I apologyse for my bad english ;)

Edited by Jim Supersym
Link to comment
Share on other sites

okay !

Thank you for yoy answer !

here is the ini file :

[General]

UpdatedByVersion=4827

History=DU4W2XRBKZGEKRE5T7ZK8

TCASid=Flight

TCASrange=40

AxisCalibration=No

DirectAxesToCalibs=No

ShowMultilineWindow=Yes

SuppressSingleline=No

SuppressMultilineFS=No

AxisIntercepts=No

WeatherReadFactor=2

WeatherRewriteSeconds=1

CustomWeatherModify=No

SimConnectStallTime=1

Console=No

DontResetAxes=No

AxesWrongRange=No

InitDelay=0

GetNearestAirports=Yes

LuaRerunDelay=66

MouseWheelMove=No

MouseWheelTrim=Yes

MouseWheelTrimSpeed=1

JoystickTimeout=20

PollGFTQ6=Yes

BlankDisplays=No

FixControlAccel=No

FixMachSpeedBug=No

DeleteVehiclesForAES=Yes

AutoScanDevices=Yes

VisibilityOptions=No

OneCloudLayer=No

CloudTurbulence=No

CloudIcing=No

GenerateCirrus=No

SuppressCloudTurbulence=No

MaxIce=-4

MinIce=-4

UpperWindGusts=No

SuppressWindTurbulence=No

SuppressWindVariance=No

WindTurbulence=No

TurbulenceRate=1.0,5.0

TurbulenceDivisor=20,20,40,40

SuppressAllGusts=No

MaxSurfaceWind=0

WindLimitLevel=200

WindDiscardLevel=400

WindAjustAltitude=No

WindAjustAltitudeBy=2000

SmoothBySimTime=No

WindSmoothing=No

WindSmoothness=2

WindSmoothAirborneOnly=Yes

PressureSmoothness=0

TemperatureSmoothness=0

DisconnTrimForAP=No

ZeroElevForAPAlt=No

ThrottleSyncAll=No

WhiteMessages=No

ShowPMcontrols=No

SpoilerIncrement=512

MagicBattery=No

RudderSpikeRemoval=No

ElevatorSpikeRemoval=No

AileronSpikeRemoval=No

ReversedElevatorTrim=No

ClockSync=No

ClockSyncMins=5

ClearWeatherDynamics=No

OwnWeatherChanges=No

TimeForSelect=4

LoadFlightMenu=No

LoadPlanMenu=No

PauseAfterCrash=No

BrakeReleaseThreshold=75

SaveDataWithFlights=No

ZapSound=firework

ShortAircraftNameOk=No

UseProfiles=Yes

EnableMouseLook=No

FSVersionUsed="Microsoft Flight Simulator X",10.0.61637.0

SimConnectUsed=10.0.61259.0

[JoyNames]

AutoAssignLetters=No

1=Saitek Pro Flight Rudder Pedals

1.GUID={E1D20B50-5A53-11E1-8001-444553540000}

0=USB Game Controllers

0.GUID={88769DC0-EC99-11DE-8004-444553540000}

[WideServer]

WideFSenabled=Yes

[sounds]

Path=H:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\Sound\

Device1=Périphérique audio principal

Device2=Haut-parleurs (2- Realtek High Definition Audio)

Device3=Realtek Digital Output (2- Realtek High Definition Audio)

Device4=Realtek Digital Output(Optical) (2- Realtek High Definition Audio)

[buttons]

Buttonrepeat=20,10

1=P0,14,C65752,0

2=P0,16,C66080,0

3=P0,17,C66079,0

4=R0,2,C65607,0

5=R0,3,C65615,0

6=R0,21,C65602,0

7=U0,21,C65604,0

12=P2,8,C66204,0

14=P0,0,C65588,0

16=P2,3,C66204,0

[AutoSave]

Next=6

Interval=30

Files=10

SaveOnGround=Yes

AutoSaveEnabled=Yes

1=Fri 002138

2=Fri 002208

3=Fri 002238

4=Fri 002307

5=Fri 002337

6=Fri 001614

7=Fri 001940

8=Fri 002010

9=Fri 002039

10=Fri 002109

11=Wed 214523

12=Wed 214533

13=Wed 214542

14=Wed 214552

15=Wed 214601

16=Wed 214611

17=Wed 214620

18=Wed 214630

19=Wed 214640

20=Wed 215227

21=Wed 213421

22=Wed 213430

23=Wed 213440

24=Wed 213449

25=Wed 213518

26=Wed 213527

27=Wed 213537

28=Wed 213546

29=Wed 213731

30=Wed 213741

31=Wed 213750

32=Wed 213800

33=Wed 213809

34=Wed 213819

35=Wed 213828

36=Wed 213838

37=Wed 213847

38=Wed 213857

39=Wed 213906

40=Wed 213916

41=Wed 213925

42=Wed 213935

43=Wed 213944

44=Wed 213954

45=Wed 214003

46=Wed 214013

47=Wed 214022

48=Wed 214032

49=Wed 214042

50=Wed 214051

51=Wed 214101

52=Wed 214110

53=Wed 214120

54=Wed 214129

55=Wed 214139

56=Wed 214148

57=Wed 214158

58=Wed 214207

59=Wed 214217

60=Wed 214227

[GPSout]

GPSoutEnabled=No

Port=COM0

Speed=4800

Interval=2000

PosTo6Decimal=No

Sentences=

[GPSout2]

GPSoutEnabled=No

Port=<none set>

Speed=4800

Interval=2000

PosTo6Decimal=No

Sentences=

[Axes]

0=0X,256,F,65763,0,0,0

1=0U,256,F,65762,0,0,0

2=0V,256,F,65763,0,0,0

[JoystickCalibration]

AllowSuppressForPFCquad=Yes

ExcludeThrottleSet=Yes

ExcludeMixtureSet=Yes

ExcludePropPitchSet=Yes

SepRevsJetsOnly=No

ApplyHeloTrim=No

UseAxisControlsForNRZ=No

FlapsSetControl=0

FlapDetents=No

ReverserControl=66292

Reverser1Control=66422

Reverser2Control=66425

Reverser3Control=66428

Reverser4Control=66431

MaxThrottleForReverser=256

AileronTrimControl=66731

RudderTrimControl=66732

CowlFlaps1Control=66162

CowlFlaps2Control=66163

CowlFlaps3Control=66164

CowlFlaps4Control=66165

SteeringTillerControl=0

MaxSteerSpeed=60

LeftBrake=-16384,16383

RightBrake=-16384,16383

Spoilers=-16256,16384/16

Flaps=-16383,16384/16

Reverser=0,0

Aileron=-16384,0,0,16383

Rudder=-16384,0,0,16191

Throttle=-16384,16192

Mixture=-16380,16380

Elevator=-16384,0,0,16383

MapThr1to234=Yes

MapThr12to34=Yes

MapThr12to123=Yes

PropPitch=-16384,16383

[Profile.cessna152]

1=C152II LIGHTBLUE G.F.

2=Flight Test Aircraft E1

3=C152II Calypso G.F.

[Axes.cessna152]

0=0X,1,F,65763,0,0,0

1=0Y,256,F,65762,0,0,0

2=0Z,256,F,65765,0,0,0

3=0V,256,D,23,0,0,0

4=1X,256,F,66387,0,0,0

5=1Y,256,F,66388,0,0,0

6=1R,256,F,65764,0,0,0

7=2X,256,D,4,0,0,0

8=2R,256,D,6,0,0,0

[JoystickCalibration.cessna152]

AllowSuppressForPFCquad=Yes

ExcludeThrottleSet=Yes

ExcludeMixtureSet=Yes

ExcludePropPitchSet=Yes

SepRevsJetsOnly=No

ApplyHeloTrim=No

UseAxisControlsForNRZ=No

MapThr1to234=Yes

MapThr12to34=Yes

MapThr12to123=Yes

FlapsSetControl=0

FlapDetents=No

ReverserControl=66292

Reverser1Control=66422

Reverser2Control=66425

Reverser3Control=66428

Reverser4Control=66431

MaxThrottleForReverser=256

AileronTrimControl=66731

RudderTrimControl=66732

CowlFlaps1Control=66162

CowlFlaps2Control=66163

CowlFlaps3Control=66164

CowlFlaps4Control=66165

SteeringTillerControl=0

MaxSteerSpeed=60

Aileron=-16380,0,0,16380

Elevator=-16159,0,0,16224

Rudder=-16384,0,0,16255

PropPitch=-16384,16383

Mixture=-16254,16320

LeftBrake=-16383,16384/16

RightBrake=-16383,16384/16

Spoilers=-16383,16384/16

Flaps=-16383,16384/16

Reverser=0,0

SlopeRudder=-1

Throttle=-16380,16380

[Profile.74710]

1=PMDG 747-8i Air France

[Axes.747 10]

0=0X,256,F,65695,0,0,0

1=0Y,256,F,65694,0,0,0

2=0Z,256,D,22,0,0,0

3=0U,256,D,4,0,0,0

4=0V,256,D,23,0,0,0

5=1X,256,D,7,0,0,0

6=1Y,256,D,8,0,0,0

7=1R,256,F,65696,0,0,0

8=2X,256,F,65697,0,0,0

9=2Y,256,F,65767,0,0,0

10=2R,256,F,65773,0,0,0

[buttons.cessna152]

0=P2,7,C66241,0

1=U2,7,C66241,0

2=P2,6,C66242,0

3=U2,6,C66242,0

4=P2,3,C65571,0

5=U2,3,C65571,0

6=P2,0,C66204,0

7=U2,0,C66204,0

8=P2,8,C66239,0

9=U2,8,C66239,0

[buttons.74710]

0=H2,0,K77,8

1=H2,1,K65,8

2=U2,1,K65,8

3=H2,2,K76,8

4=U2,2,K76,8

5=U2,0,K77,8

6=R0,0,C65588,0

7=R0,21,C65602,0

8=U0,21,C65604,0

[Profile.747 10]

1=747 10

Edited by Jim Supersym
Link to comment
Share on other sites

here is the ini file :

And the log with the problem aircraft being loded?

UpdatedByVersion=4827

Version 4.827 is well out of date now and unsupported. A lot of changes have occurred to improve the Profile system. Please update. The earliest supported is 4.853, and there's an 4.859m available in Download Links subforum.

Looking at the INI file you seem to have two similarly named but different 747 profile names set up:

[Profile.74710]

1=PMDG 747-8i Air France

and

[Profile.747 10]

1=747 10

with axes assigned, no buttons, in the latter:

[Axes.747 10]

and buttons assigned, no axes, in the former:

[buttons.74710]

Regards

Pete

Link to comment
Share on other sites

I will post later the log file. I did'nt read that the log file was necessary.

I will update with the last version.

I've changed manually in the ini file the name of the profile because I thought that "74710" was better than "47 410", and I' ve forgotten the axes line !

I will send the log file this evening (for France).

Regards

Jim

Edited by Jim Supersym
Link to comment
Share on other sites

hello !

Here is the log file.

********* FSUIPC4, Version 4.827 by Pete Dowson *********

User Name="**************"

User Addr="symsei1964@live.fr"

FSUIPC4 Key is provided

WIDEFS7 not user registered, or expired

Running inside FSX on Windows 7

Module base=61000000

94 System time = 12/01/2013 18:36:28

94 FLT path = "C:\Users\BUREAU\Documents\Fichiers Flight Simulator X\"

109 Trying to connect to SimConnect Acc/SP2 Oct07 ...

109 FS path = "H:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\"

374 LogOptions=00000000 00000001

374 Wind smoothing fix is fully installed

374 G3D.DLL fix attempt installed ok

374 SimConnect_Open succeeded: waiting to check version okay

374 Trying to use SimConnect Acc/SP2 Oct07

4306 Running in "Microsoft Flight Simulator X", Version: 10.0.61637.0 (SimConnect: 10.0.61259.0)

4306 Initialising SimConnect data requests now

4306 FSUIPC Menu entry added

4368 c:\users\bureau\documents\fichiers flight simulator x\superbug à chateauroux.FLT

4368 H:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\SimObjects\Airplanes\VRS_FA-18E\FA-18E-6.8_SE.AIR

73445 System time = 12/01/2013 18:37:41

73445 *** FSUIPC log file being closed

G3D fix: Passes 140, Null pointers 0, Bad pointers 0, Separate instances 0

Memory managed: 4 Allocs, 4 Freed

********* FSUIPC Log file closed ***********

It's the same thing with the last update :

********* FSUIPC4, Version 4.859m by Pete Dowson *********

Running inside FSX on Windows 7

Module base=59810000

User Name="***************"

User Addr="symsei1964@live.fr"

FSUIPC4 Key is provided

WIDEFS7 not user registered, or expired

171 System time = 14/01/2013 20:36:07

171 FLT path = "C:\Users\BUREAU\Documents\Fichiers Flight Simulator X\"

203 Trying to connect to SimConnect Acc/SP2 Oct07 ...

203 FS path = "H:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\"

452 LogOptions=00000000 00000001

452 ### SIM1 base=20BB0000, friction=20BB2870

452 SIM1 Frictions access gained

452 Wind smoothing fix is fully installed

452 G3D.DLL fix attempt installed ok

452 SimConnect_Open succeeded: waiting to check version okay

452 Trying to use SimConnect Acc/SP2 Oct07

3791 Running in "Microsoft Flight Simulator X", Version: 10.0.61637.0 (SimConnect: 10.0.61259.0)

3791 Initialising SimConnect data requests now

3791 FSUIPC Menu entry added

3822 c:\users\bureau\documents\fichiers flight simulator x\superbug à chateauroux.FLT

3822 H:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\SimObjects\Airplanes\VRS_FA-18E\FA-18E-6.8_SE.AIR

3915 Weather Mode now = Global

7878 Weather Mode now = Theme

15849 ASE with WX requester detected

16224 Aircraft="Flight Test Aircraft E1"

16239 System time = 14/01/2013 20:36:23, Simulator time = 11:32:40 (11:32Z)

83445 Weather Mode now = Global

95441 Starting everything now ...

95441 AES Link established

95535 Advanced Weather Interface Enabled

111244 Weather Mode now = Theme

111369 Weather Mode now = Global

159838 Weather Mode now = Theme

159979 Weather Mode now = Global

179775 Weather Mode now = Theme

179775 C:\Users\BUREAU\AppData\Roaming\Microsoft\FSX\Vol précédent.FLT

186936 System time = 14/01/2013 20:39:14, Simulator time = 12:33:15 (11:33Z)

186936 *** FSUIPC log file being closed

Average frame rate for running time of 41 secs = 20.0 fps

G3D fix: Passes 27924, Null pointers 0, Bad pointers 0, Separate instances 0

Memory managed: 36 Allocs, 36 Freed

********* FSUIPC Log file closed ***********

Edited by Jim Supersym
Link to comment
Share on other sites

Since the first log file I've changed the livery of the aircraft. So it's why the name has changed.

But what can I do ?

Either assign the aircraft to the same profile, or, more flexibly, change the [General] parameter

ShortAircraftNameOk=No

to

ShortAircraftNameOk=Substring

and edit the name listed after 1= in your [Profile....] section to a short subset of the name which applies to all liveries.

Regards

Pete

Link to comment
Share on other sites

Try deleting the line highlighted below from your FSUIPC4.ini, is this perhaps the FA18? If it is then it means that YOU have assigned the FA18 to the Cessna profile that you made. With that line removed you should now be able to make a new profile for that aircraft.

[Profile.cessna152]

1=C152II LIGHTBLUE G.F.

2=Flight Test Aircraft E1

3=C152II Calypso G.F.

Link to comment
Share on other sites

unfortunately the checkbox remain grayed out :oops:

I'm afraid I don't know how that can be. Could you re-post the INI file, as it is now, AND the Log file corresponding to this attempt. If I still cannot see how it can occur I will have to add some diagnostic logging code to get more information.

Pete

Link to comment
Share on other sites

Thanks a lot for the time you have spent with me ! :)

Here are the latest files together dated of yesteday evening 8 h 39 pm

ini file :

[General]

UpdatedByVersion=4859m

History=JP2XC37BLF6Y4ILD1F7SJ

TCASid=Flight

TCASrange=40

AxisCalibration=No

DirectAxesToCalibs=No

ShowMultilineWindow=Yes

SuppressSingleline=No

SuppressMultilineFS=No

AxisIntercepts=No

WeatherReadFactor=2

WeatherRewriteSeconds=1

CustomWeatherModify=No

SimConnectStallTime=1

Console=No

DontResetAxes=No

AxesWrongRange=No

InitDelay=0

GetNearestAirports=Yes

LuaRerunDelay=66

MouseWheelMove=No

MouseWheelTrim=Yes

MouseWheelTrimSpeed=1

JoystickTimeout=20

PollGFTQ6=Yes

BlankDisplays=No

FixControlAccel=No

FixMachSpeedBug=No

DeleteVehiclesForAES=Yes

AutoScanDevices=Yes

VisibilityOptions=No

OneCloudLayer=No

CloudTurbulence=No

CloudIcing=No

GenerateCirrus=No

SuppressCloudTurbulence=No

MaxIce=-4

MinIce=-4

UpperWindGusts=No

SuppressWindTurbulence=No

SuppressWindVariance=No

WindTurbulence=No

TurbulenceRate=1.0,5.0

TurbulenceDivisor=20,20,40,40

SuppressAllGusts=No

MaxSurfaceWind=0

WindLimitLevel=200

WindDiscardLevel=400

WindAjustAltitude=No

WindAjustAltitudeBy=2000

SmoothBySimTime=No

WindSmoothing=No

WindSmoothness=2

WindSmoothAirborneOnly=Yes

PressureSmoothness=0

TemperatureSmoothness=0

DisconnTrimForAP=No

ZeroElevForAPAlt=No

ThrottleSyncAll=No

WhiteMessages=No

ShowPMcontrols=No

SpoilerIncrement=512

MagicBattery=No

RudderSpikeRemoval=No

ElevatorSpikeRemoval=No

AileronSpikeRemoval=No

ReversedElevatorTrim=No

ClockSync=No

ClockSyncMins=5

ClearWeatherDynamics=No

OwnWeatherChanges=No

TimeForSelect=4

LoadFlightMenu=No

LoadPlanMenu=No

PauseAfterCrash=No

BrakeReleaseThreshold=75

SaveDataWithFlights=No

ZapSound=firework

ShortAircraftNameOk=No

UseProfiles=Yes

EnableMouseLook=No

InitDelayDevicesToo=No

OOMcheck=Yes

FSVersionUsed="Microsoft Flight Simulator X",10.0.61637.0

SimConnectUsed=10.0.61259.0

[JoyNames]

AutoAssignLetters=No

1=Saitek Pro Flight Rudder Pedals

1.GUID={E1D20B50-5A53-11E1-8001-444553540000}

0=USB Game Controllers

0.GUID={88769DC0-EC99-11DE-8004-444553540000}

[WideServer]

WideFSenabled=Yes

[sounds]

Path=H:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\Sound\

Device1=Périphérique audio principal

Device2=Haut-parleurs (2- Realtek High Definition Audio)

Device3=Realtek Digital Output (2- Realtek High Definition Audio)

Device4=Realtek Digital Output(Optical) (2- Realtek High Definition Audio)

[buttons]

Buttonrepeat=20,10

1=P0,14,C65752,0

2=P0,16,C66080,0

3=P0,17,C66079,0

4=R0,2,C65607,0

5=R0,3,C65615,0

6=R0,21,C65602,0

7=U0,21,C65604,0

12=P2,8,C66204,0

14=P0,0,C65588,0

16=P2,3,C66204,0

[AutoSave]

Next=6

Interval=30

Files=10

SaveOnGround=Yes

AutoSaveEnabled=Yes

1=Fri 002138

2=Fri 002208

3=Fri 002238

4=Fri 002307

5=Fri 002337

6=Fri 001614

7=Fri 001940

8=Fri 002010

9=Fri 002039

10=Fri 002109

11=Wed 214523

12=Wed 214533

13=Wed 214542

14=Wed 214552

15=Wed 214601

16=Wed 214611

17=Wed 214620

18=Wed 214630

19=Wed 214640

20=Wed 215227

21=Wed 213421

22=Wed 213430

23=Wed 213440

24=Wed 213449

25=Wed 213518

26=Wed 213527

27=Wed 213537

28=Wed 213546

29=Wed 213731

30=Wed 213741

31=Wed 213750

32=Wed 213800

33=Wed 213809

34=Wed 213819

35=Wed 213828

36=Wed 213838

37=Wed 213847

38=Wed 213857

39=Wed 213906

40=Wed 213916

41=Wed 213925

42=Wed 213935

43=Wed 213944

44=Wed 213954

45=Wed 214003

46=Wed 214013

47=Wed 214022

48=Wed 214032

49=Wed 214042

50=Wed 214051

51=Wed 214101

52=Wed 214110

53=Wed 214120

54=Wed 214129

55=Wed 214139

56=Wed 214148

57=Wed 214158

58=Wed 214207

59=Wed 214217

60=Wed 214227

[GPSout]

GPSoutEnabled=No

Port=COM0

Speed=4800

Interval=2000

PosTo6Decimal=No

Sentences=

[GPSout2]

GPSoutEnabled=No

Port=<none set>

Speed=4800

Interval=2000

PosTo6Decimal=No

Sentences=

[Axes]

0=0X,256,F,65763,0,0,0

1=0U,256,F,65762,0,0,0

2=0V,256,F,65763,0,0,0

[JoystickCalibration]

AllowSuppressForPFCquad=Yes

ExcludeThrottleSet=Yes

ExcludeMixtureSet=Yes

ExcludePropPitchSet=Yes

SepRevsJetsOnly=No

ApplyHeloTrim=No

UseAxisControlsForNRZ=No

FlapsSetControl=0

FlapDetents=No

ReverserControl=66292

Reverser1Control=66422

Reverser2Control=66425

Reverser3Control=66428

Reverser4Control=66431

MaxThrottleForReverser=256

AileronTrimControl=66731

RudderTrimControl=66732

CowlFlaps1Control=66162

CowlFlaps2Control=66163

CowlFlaps3Control=66164

CowlFlaps4Control=66165

SteeringTillerControl=0

MaxSteerSpeed=60

LeftBrake=-16384,16383

RightBrake=-16384,16383

Spoilers=-16256,16384/16

Flaps=-16383,16384/16

Reverser=0,0

Aileron=-16384,0,0,16383

Rudder=-16384,0,0,16191

Throttle=-16384,16192

Mixture=-16380,16380

Elevator=-16384,0,0,16383

MapThr1to234=Yes

MapThr12to34=Yes

MapThr12to123=Yes

PropPitch=-16384,16383

[Profile.cessna152]

1=C152II LIGHTBLUE G.F.

2=Flight Test Aircraft E1

3=C152II Calypso G.F.

[Axes.cessna152]

0=0X,1,F,65763,0,0,0

1=0Y,256,F,65762,0,0,0

2=0Z,256,F,65765,0,0,0

3=0V,256,D,23,0,0,0

4=1X,256,F,66387,0,0,0

5=1Y,256,F,66388,0,0,0

6=1R,256,F,65764,0,0,0

7=2X,256,D,4,0,0,0

8=2R,256,D,6,0,0,0

[JoystickCalibration.cessna152]

AllowSuppressForPFCquad=Yes

ExcludeThrottleSet=Yes

ExcludeMixtureSet=Yes

ExcludePropPitchSet=Yes

SepRevsJetsOnly=No

ApplyHeloTrim=No

UseAxisControlsForNRZ=No

MapThr1to234=Yes

MapThr12to34=Yes

MapThr12to123=Yes

FlapsSetControl=0

FlapDetents=No

ReverserControl=66292

Reverser1Control=66422

Reverser2Control=66425

Reverser3Control=66428

Reverser4Control=66431

MaxThrottleForReverser=256

AileronTrimControl=66731

RudderTrimControl=66732

CowlFlaps1Control=66162

CowlFlaps2Control=66163

CowlFlaps3Control=66164

CowlFlaps4Control=66165

SteeringTillerControl=0

MaxSteerSpeed=60

Aileron=-16380,0,0,16380

Elevator=-16159,0,0,16224

Rudder=-16384,0,0,16255

PropPitch=-16384,16383

Mixture=-16254,16320

LeftBrake=-16383,16384/16

RightBrake=-16383,16384/16

Spoilers=-16383,16384/16

Flaps=-16383,16384/16

Reverser=0,0

SlopeRudder=-1

Throttle=-16380,16380

[Profile.74710]

1=PMDG 747-8i Air France

[Axes.74710]

0=0X,256,F,65695,0,0,0

1=0Y,256,F,65694,0,0,0

2=0Z,256,D,22,0,0,0

3=0U,256,D,4,0,0,0

4=0V,256,D,23,0,0,0

5=1X,256,D,7,0,0,0

6=1Y,256,D,8,0,0,0

7=1R,256,F,65696,0,0,0

8=2X,256,F,65697,0,0,0

9=2Y,256,F,65767,0,0,0

10=2R,256,F,65773,0,0,0

[buttons.cessna152]

0=P2,7,C66241,0

1=U2,7,C66241,0

2=P2,6,C66242,0

3=U2,6,C66242,0

4=P2,3,C65571,0

5=U2,3,C65571,0

6=P2,0,C66204,0

7=U2,0,C66204,0

8=P2,8,C66239,0

9=U2,8,C66239,0

[buttons.74710]

0=H2,0,K77,8

1=H2,1,K65,8

2=U2,1,K65,8

3=H2,2,K76,8

4=U2,2,K76,8

5=U2,0,K77,8

6=R0,0,C65588,0

7=R0,21,C65602,0

8=U0,21,C65604,0

[Profile.74710]

1=74710

log file :

********* FSUIPC4, Version 4.859m by Pete Dowson *********

Running inside FSX on Windows 7

Module base=59810000

User Name="************"

User Addr="symsei1964@live.fr"

FSUIPC4 Key is provided

WIDEFS7 not user registered, or expired

171 System time = 14/01/2013 20:36:07

171 FLT path = "C:\Users\BUREAU\Documents\Fichiers Flight Simulator X\"

203 Trying to connect to SimConnect Acc/SP2 Oct07 ...

203 FS path = "H:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\"

452 LogOptions=00000000 00000001

452 ### SIM1 base=20BB0000, friction=20BB2870

452 SIM1 Frictions access gained

452 Wind smoothing fix is fully installed

452 G3D.DLL fix attempt installed ok

452 SimConnect_Open succeeded: waiting to check version okay

452 Trying to use SimConnect Acc/SP2 Oct07

3791 Running in "Microsoft Flight Simulator X", Version: 10.0.61637.0 (SimConnect: 10.0.61259.0)

3791 Initialising SimConnect data requests now

3791 FSUIPC Menu entry added

3822 c:\users\bureau\documents\fichiers flight simulator x\superbug à chateauroux.FLT

3822 H:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\SimObjects\Airplanes\VRS_FA-18E\FA-18E-6.8_SE.AIR

3915 Weather Mode now = Global

7878 Weather Mode now = Theme

15849 ASE with WX requester detected

16224 Aircraft="Flight Test Aircraft E1"

16239 System time = 14/01/2013 20:36:23, Simulator time = 11:32:40 (11:32Z)

83445 Weather Mode now = Global

95441 Starting everything now ...

95441 AES Link established

95535 Advanced Weather Interface Enabled

111244 Weather Mode now = Theme

111369 Weather Mode now = Global

159838 Weather Mode now = Theme

159979 Weather Mode now = Global

179775 Weather Mode now = Theme

179775 C:\Users\BUREAU\AppData\Roaming\Microsoft\FSX\Vol précédent.FLT

186936 System time = 14/01/2013 20:39:14, Simulator time = 12:33:15 (11:33Z)

186936 *** FSUIPC log file being closed

Average frame rate for running time of 41 secs = 20.0 fps

G3D fix: Passes 27924, Null pointers 0, Bad pointers 0, Separate instances 0

Memory managed: 36 Allocs, 36 Freed

********* FSUIPC Log file closed ***********

Link to comment
Share on other sites

Thanks a lot for the time you have spent with me !

Here are the latest files together dated of yesteday evening 8 h 39 pm

But you've changed nothing?

Which FSUIPC tab are you trying to assign a profile? According to the Log you only loaded the aircraft called "Flight Test Aircraft E1":

16224 Aircraft="Flight Test Aircraft E1"

and this is already assigned to the "cessna152" profile, here:

[Profile.cessna152]

1=C152II LIGHTBLUE G.F.

2=Flight Test Aircraft E1

3=C152II Calypso G.F.

Therefore the checkbox for profiles SHOULD be ticked and grayed out for Axis assignments, though not for Buttons or Keys, because with those you can have both general and specific asssignments.

You say you cannot assign the aircraft to a Profile, but that is precisely because it is already assigned, as pointed out already.

I think you need to explain in more detail what it is you are concerned about, please, because it is certainly appearing as if you are misunderstanding things. If you want to assign this aircraft to a different Profile now you'll need to delete the line assigning it to an existing Profile, as andy suggested.

Pete

Link to comment
Share on other sites

It's also strange that there are 60 records in the Autosave section when you have 10 specified as the number to retain.

I suspect that he did have 60 set once, and when changing it to 10 did not delete the excess. FSUIPC doesn't remember how many there were. You'll note theose after the 10 have a discontinuous timestamp.

Regards

Pete

Link to comment
Share on other sites

I can't : I can't create a new profile for my fa18 for instance. Because off the grayed out of the checkbox.

And the name of the aircraft (fa18) has been automaticilly created in the cessna profile.

I only just read this entry. There is no way a new aircraft (one with a different name) can ever be "automatically" added to a profile. It can only be done by user selection. Apart from the profile assigned, if any, to the current aircraft, none of the profile names are even known to FSUIPC until you use the selection facility in the options.

I think I have to emphasise what has now been said at least twice. delete the line assigning the aircraft to the cessna profile. I'm afraid FSUIPC does not currently offer an option to do this via the Options tabs -- I thought it an infrequent need and resources better spent elsewhere.

Regards,

Pete

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use. Guidelines Privacy Policy We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.