Jump to content
The simFlight Network Forums

Throttle Manager to Allow Axis Forward/Reverse Toggle


pilotjohn

Recommended Posts

EDIT: Latest version (1.1.3) attached as of 1/17/2012

I wrote this Lua script to allow the button below the detent on a Saitek quadrant lever to be used to toggle whether the lever acts toward forward or reverse thrust. State feedback is via display or sounds (attached). It currently handles the first two throttles but can be quickly expanded (by adding a configuration section) to include all four. I wasn't allowed to upload a .lua file, so it's attached as a .txt that you have to rename to .lua after you download it. Below is more information from the header:

-- Throttle Manager for FSUIPC
-- E-mail: pilotjohn at gearsdown.com
-- Sounds: http://www.freesound.org/people/milton./packs/5284/
--
-- Manage throttles to provide both forward and reverse thrust
-- on single axes by allowing functionality toggle through dedicated
-- joystick buttons (such as those below the detent on Saitek quadrants).
-- Can be configured to auto-toggle to forward thrust, and in many other ways.
-- Setup (do steps 2-5 for each throttle to manage):
--
-- 1. Edit "FSUIPC.ini" and add (substitute X for 1 or next # if exists):
-- 	[Auto]
-- 	X=Lua ThrottleManager
--
-- 2. In FSX "Settings" "Controls",
--	  delete joystick assignment for throttle N
--
-- 3. In FSUIPC "Axis Assignment",
--	  "MOVE" "LEVER",
--	  select "Send direct to FSUIPC Calibration"
--	  and check "Throttle N"
--
-- 4. In FSUIPC "Joystick Calbiration",
--	  on "3 of 11: Separate throttles per engine",
--	  check "No reverse Zone",
--	  and "Set" "Min" and "Max" for "Throttle N"
--
-- 5. In FSUIPC "Buttons + Switches",
-- 	check "Select for FS control",
-- 	choose "LuaToggle ThrottleManager",
-- 	and enter "N" for "Paramater"
--
-- 6. Configure below as desired.

ThrottleManagerF.wav

ThrottleManagerNR.wav

ThrottleManagerR.wav

ThrottleManager.txt

  • Upvote 1
Link to comment
Share on other sites

  • 1 month later...

really clever idea, Im gonna try

EDIT:

tested: this is a Great Mod

(some problems with hanging REV (I suspect dirty switches perhaps?), but sort of 'cleaning themselves' now that I use these buttons more)

the 'automatic toggle back to forward throttle' is quite an experience

Link to comment
Share on other sites

  • 2 weeks later...

really clever idea, Im gonna try

EDIT:

tested: this is a Great Mod

(some problems with hanging REV (I suspect dirty switches perhaps?), but sort of 'cleaning themselves' now that I use these buttons more)

the 'automatic toggle back to forward throttle' is quite an experience

If you turn on "Filter" on the throttle axis, you won't have the hang in REV problem. You can also increase the threshold where the auto-forward toggles.

Link to comment
Share on other sites

  • 4 weeks later...
  • 3 weeks later...

I like this idea but what is a LUA file, sorry not familiar with that. Is this a file that goes in the fsuipc folders?

Lua is another programming language, but one designed for things like scripting and configuring other programs. It can be quite powerfiul in terms of scope, mainly because of the libraries of functions also provided.

There's a Lua compiler / interpreter built into FSUIPC (and WideClient) to allow all sorts of applications to be "plugged in" to FSUIPC and WideFS. If you look in the FSUIPC Documents folder (in your FS Modules folder) you'll find documentation and examples provided for you.

Supporting Lua in FSUIPC/WideFS is a way of allowing the power of FSUIPC to be expanded indefinitely, as folks find more interesting and useful things to do.

Regards

Pete

Link to comment
Share on other sites

  • 3 weeks later...

John

trying to do this now.

If I understand correctly, I open my fsuipc.ini file, I place at the end of the notepad [auto] and then under that 1=LUA ThrottleManager. Is this all I need to do in the ini file? The rest I set up in the fsx modules section of FSUIPC?

When I go through the setup and into fsx and set axies and joysticks when I get to button and switches I dont see LUA ThrottleManager as an option.

Link to comment
Share on other sites

John

trying to do this now.

If I understand correctly, I open my fsuipc.ini file, I place [auto] and then under that 1=LUA ThrottleManager. Is this all I need to do in the ini file? The rest I set up in the fsx modules section of FSUIPC?

Correct... and place ThrottleManager and sounds in FSX\Modules. Then if FSUIPC is running you should have an Add-ons->FSUIPC menu entry and set everything else up there.

Link to comment
Share on other sites

just place the throttleManager txt file in the fsx/modules folder? I am sorry, but when it comes to computers I am not the brightess!

After all that I still do not see anything in the drop down menu on button and switches for the lua throttle manager.

In the fsuipc.ini file, I just basically added at the end the following....

[auto]

1=LuaToggle ThrottleManager

I have nothing else in the ini,file. Should I be putting all the text in the throttlemanager here?

Link to comment
Share on other sites

when you say "N" I am assuming that is the engine number?

If that is the case I followed the instructions to the best of my ability, I got the joystick and axises set, button and switch set. What is the next step? When I bring my throttle lever down to the button stage and move it back up no reverse occurs.

The configuration section, is that something I am to place somewhere?

Link to comment
Share on other sites

when you say "N" I am assuming that is the engine number?

If that is the case I followed the instructions to the best of my ability, I got the joystick and axises set, button and switch set. What is the next step? When I bring my throttle lever down to the button stage and move it back up no reverse occurs.

The configuration section, is that something I am to place somewhere?

Yes, it has to be named .lua, not .lua.txt. You can right-click on it and rename.

And in FSUIPC it should be:

[auto]

1=Lua ThrottleManager

You show "LuaToggle" which is for the Button+Switches assignment. And, yes, N is the engine number (e.g. 1 or 2)

Everything after step 1, you do in FSX after a flight is loaded, since all the steps there are based on the FSX and FSUIPC GUIs. FSUIPC is accessed via Add-Ons->FSUIPC menu item. And just for the record, you do need a registered version of FSUIPC.

Link to comment
Share on other sites

ok, if that is all I do then it is not engaging the reverse thrust. I use the ch throttle quad. I tried using the detent below idle as the button and another separate button to engage reverse. I will play around with it, maybe I have something saved wrong.

Link to comment
Share on other sites

ok, if that is all I do then it is not engaging the reverse thrust. I use the ch throttle quad. I tried using the detent below idle as the button and another separate button to engage reverse. I will play around with it, maybe I have something saved wrong.

ok, if that is all I do then it is not engaging the reverse thrust. I use the ch throttle quad. I tried using the detent below idle as the button and another separate button to engage reverse. I will play around with it, maybe I have something saved wrong.

You should turn on Lua logging in FSUIPC (GUI). That will tell you whether the ThrottleManager script is actually loaded and it should log changes in throttle behavior.

Link to comment
Share on other sites

This is what I got when I tried logging my actions. I dont see the script running in this.

********* FSUIPC4, Version 4.749e by Pete Dowson *********

User Name="Anthony Neumann"

User Addr="antney79@aol.com"

FSUIPC4 Key is provided

WIDEFS7 not user registered, or expired

[Continuation log requested by user]

Running inside FSX on Windows 7

Module base=61000000

1242844 System time = 02/01/2012 14:00:45, Simulator time = 13:51:56 (19:51Z)

1243094 Ready Flags: Ready-To-Fly=Y, In Menu=N, In Dlg=N

1244670 FS Control Sent: Ctrl=66080, Param=0

1244670 FS Control Sent: Ctrl=66423, Param=-16384

1244670 FS Control Sent: Ctrl=66429, Param=-14433

1244670 FS Control Sent: Ctrl=66426, Param=-14563

1244670 *** EVENT: Cntrl= 66080 (0x00010220), Param= 0 (0x00000000) GEAR_DOWN

1244794 *** AXIS: Cntrl= 65820 (0x0001011c), Param= 475 (0x000001db) THROTTLE1_SET

1244841 *** AXIS: Cntrl= 65820 (0x0001011c), Param= 1368 (0x00000558) THROTTLE1_SET

1244935 *** AXIS: Cntrl= 65820 (0x0001011c), Param= 2698 (0x00000a8a) THROTTLE1_SET

1244982 *** AXIS: Cntrl= 65820 (0x0001011c), Param= 4075 (0x00000feb) THROTTLE1_SET

1245060 *** AXIS: Cntrl= 65820 (0x0001011c), Param= 5322 (0x000014ca) THROTTLE1_SET

1245106 *** AXIS: Cntrl= 65820 (0x0001011c), Param= 6355 (0x000018d3) THROTTLE1_SET

1245153 *** AXIS: Cntrl= 65820 (0x0001011c), Param= 7134 (0x00001bde) THROTTLE1_SET

1245247 *** AXIS: Cntrl= 65820 (0x0001011c), Param= 8170 (0x00001fea) THROTTLE1_SET

1245294 *** AXIS: Cntrl= 65820 (0x0001011c), Param= 8948 (0x000022f4) THROTTLE1_SET

1245340 *** AXIS: Cntrl= 65820 (0x0001011c), Param= 9495 (0x00002517) THROTTLE1_SET

1245340 *** AXIS: Cntrl= 65820 (0x0001011c), Param= 10309 (0x00002845) THROTTLE1_SET

1245418 *** AXIS: Cntrl= 65820 (0x0001011c), Param= 10387 (0x00002893) THROTTLE1_SET

1245465 *** AXIS: Cntrl= 65820 (0x0001011c), Param= 11062 (0x00002b36) THROTTLE1_SET

1245465 *** AXIS: Cntrl= 65820 (0x0001011c), Param= 11915 (0x00002e8b) THROTTLE1_SET

1245559 *** AXIS: Cntrl= 65820 (0x0001011c), Param= 11938 (0x00002ea2) THROTTLE1_SET

1245606 *** AXIS: Cntrl= 65820 (0x0001011c), Param= 12604 (0x0000313c) THROTTLE1_SET

1245652 *** AXIS: Cntrl= 65820 (0x0001011c), Param= 13137 (0x00003351) THROTTLE1_SET

1245730 *** AXIS: Cntrl= 65820 (0x0001011c), Param= 14137 (0x00003739) THROTTLE1_SET

1245777 *** AXIS: Cntrl= 65820 (0x0001011c), Param= 14860 (0x00003a0c) THROTTLE1_SET

1245871 *** AXIS: Cntrl= 65820 (0x0001011c), Param= 15683 (0x00003d43) THROTTLE1_SET

1245918 *** AXIS: Cntrl= 65820 (0x0001011c), Param= 16061 (0x00003ebd) THROTTLE1_SET

1245964 *** AXIS: Cntrl= 65820 (0x0001011c), Param= 16235 (0x00003f6b) THROTTLE1_SET

1246042 *** AXIS: Cntrl= 65820 (0x0001011c), Param= 16315 (0x00003fbb) THROTTLE1_SET

1246089 *** AXIS: Cntrl= 65820 (0x0001011c), Param= 16352 (0x00003fe0) THROTTLE1_SET

1246183 *** AXIS: Cntrl= 65820 (0x0001011c), Param= 16369 (0x00003ff1) THROTTLE1_SET

1246230 *** AXIS: Cntrl= 65820 (0x0001011c), Param= 16377 (0x00003ff9) THROTTLE1_SET

1246276 *** AXIS: Cntrl= 65820 (0x0001011c), Param= 16380 (0x00003ffc) THROTTLE1_SET

1246370 *** AXIS: Cntrl= 65820 (0x0001011c), Param= 16382 (0x00003ffe) THROTTLE1_SET

1246401 *** AXIS: Cntrl= 65820 (0x0001011c), Param= 16383 (0x00003fff) THROTTLE1_SET

1246542 *** AXIS: Cntrl= 65820 (0x0001011c), Param= 16384 (0x00004000) THROTTLE1_SET

1248429 *** AXIS: Cntrl= 65820 (0x0001011c), Param= 16233 (0x00003f69) THROTTLE1_SET

1248476 *** AXIS: Cntrl= 65820 (0x0001011c), Param= 15749 (0x00003d85) THROTTLE1_SET

1248554 *** AXIS: Cntrl= 65820 (0x0001011c), Param= 15074 (0x00003ae2) THROTTLE1_SET

1248601 *** AXIS: Cntrl= 65820 (0x0001011c), Param= 14273 (0x000037c1) THROTTLE1_SET

1248648 *** AXIS: Cntrl= 65820 (0x0001011c), Param= 13490 (0x000034b2) THROTTLE1_SET

1248741 *** AXIS: Cntrl= 65820 (0x0001011c), Param= 12225 (0x00002fc1) THROTTLE1_SET

1248788 *** AXIS: Cntrl= 65820 (0x0001011c), Param= 11115 (0x00002b6b) THROTTLE1_SET

1248835 *** AXIS: Cntrl= 65820 (0x0001011c), Param= 10001 (0x00002711) THROTTLE1_SET

1248913 *** AXIS: Cntrl= 65820 (0x0001011c), Param= 8772 (0x00002244) THROTTLE1_SET

1248960 *** AXIS: Cntrl= 65820 (0x0001011c), Param= 7903 (0x00001edf) THROTTLE1_SET

1249053 *** AXIS: Cntrl= 65820 (0x0001011c), Param= 6546 (0x00001992) THROTTLE1_SET

1249100 *** AXIS: Cntrl= 65820 (0x0001011c), Param= 5309 (0x000014bd) THROTTLE1_SET

1249147 *** AXIS: Cntrl= 65820 (0x0001011c), Param= 4318 (0x000010de) THROTTLE1_SET

1249240 *** AXIS: Cntrl= 65820 (0x0001011c), Param= 3097 (0x00000c19) THROTTLE1_SET

1249287 *** AXIS: Cntrl= 65820 (0x0001011c), Param= 2114 (0x00000842) THROTTLE1_SET

1249365 *** AXIS: Cntrl= 65820 (0x0001011c), Param= 742 (0x000002e6) THROTTLE1_SET

1249412 *** AXIS: Cntrl= 65820 (0x0001011c), Param= 111 (0x0000006f) THROTTLE1_SET

1249459 Button changed: bRef=0, Joy=0, Btn=16, Pressed

1249459 [buttons] 13=P0,16,CL3:T,1

1249459 *** AXIS: Cntrl= 65820 (0x0001011c), Param= 0 (0x00000000) THROTTLE1_SET

1251268 Button changed: bRef=0, Joy=0, Btn=16, Released

1251487 *** AXIS: Cntrl= 65820 (0x0001011c), Param= 14 (0x0000000e) THROTTLE1_SET

1251534 *** AXIS: Cntrl= 65820 (0x0001011c), Param= 542 (0x0000021e) THROTTLE1_SET

1251534 *** AXIS: Cntrl= 65820 (0x0001011c), Param= 1276 (0x000004fc) THROTTLE1_SET

1251580 *** AXIS: Cntrl= 65820 (0x0001011c), Param= 1360 (0x00000550) THROTTLE1_SET

1251658 *** AXIS: Cntrl= 65820 (0x0001011c), Param= 2579 (0x00000a13) THROTTLE1_SET

1251658 *** AXIS: Cntrl= 65820 (0x0001011c), Param= 3971 (0x00000f83) THROTTLE1_SET

1251705 *** AXIS: Cntrl= 65820 (0x0001011c), Param= 3753 (0x00000ea9) THROTTLE1_SET

1251799 *** AXIS: Cntrl= 65820 (0x0001011c), Param= 4943 (0x0000134f) THROTTLE1_SET

1251799 *** AXIS: Cntrl= 65820 (0x0001011c), Param= 6312 (0x000018a8) THROTTLE1_SET

1251846 *** AXIS: Cntrl= 65820 (0x0001011c), Param= 6066 (0x000017b2) THROTTLE1_SET

1251892 *** AXIS: Cntrl= 65820 (0x0001011c), Param= 6812 (0x00001a9c) THROTTLE1_SET

1251970 *** AXIS: Cntrl= 65820 (0x0001011c), Param= 7871 (0x00001ebf) THROTTLE1_SET

1252017 *** AXIS: Cntrl= 65820 (0x0001011c), Param= 8472 (0x00002118) THROTTLE1_SET

1252111 *** AXIS: Cntrl= 65820 (0x0001011c), Param= 9389 (0x000024ad) THROTTLE1_SET

1252158 *** AXIS: Cntrl= 65820 (0x0001011c), Param= 10037 (0x00002735) THROTTLE1_SET

1252204 *** AXIS: Cntrl= 65820 (0x0001011c), Param= 10674 (0x000029b2) THROTTLE1_SET

1252282 *** AXIS: Cntrl= 65820 (0x0001011c), Param= 11307 (0x00002c2b) THROTTLE1_SET

1252329 *** AXIS: Cntrl= 65820 (0x0001011c), Param= 11900 (0x00002e7c) THROTTLE1_SET

1252423 *** AXIS: Cntrl= 65820 (0x0001011c), Param= 12624 (0x00003150) THROTTLE1_SET

1252470 *** AXIS: Cntrl= 65820 (0x0001011c), Param= 13260 (0x000033cc) THROTTLE1_SET

1252516 *** AXIS: Cntrl= 65820 (0x0001011c), Param= 13778 (0x000035d2) THROTTLE1_SET

1252594 *** AXIS: Cntrl= 65820 (0x0001011c), Param= 14582 (0x000038f6) THROTTLE1_SET

1252641 *** AXIS: Cntrl= 65820 (0x0001011c), Param= 15103 (0x00003aff) THROTTLE1_SET

1252735 *** AXIS: Cntrl= 65820 (0x0001011c), Param= 15794 (0x00003db2) THROTTLE1_SET

1252782 *** AXIS: Cntrl= 65820 (0x0001011c), Param= 16112 (0x00003ef0) THROTTLE1_SET

1252828 *** AXIS: Cntrl= 65820 (0x0001011c), Param= 16259 (0x00003f83) THROTTLE1_SET

1252906 *** AXIS: Cntrl= 65820 (0x0001011c), Param= 16326 (0x00003fc6) THROTTLE1_SET

1252953 *** AXIS: Cntrl= 65820 (0x0001011c), Param= 16357 (0x00003fe5) THROTTLE1_SET

1253047 *** AXIS: Cntrl= 65820 (0x0001011c), Param= 16371 (0x00003ff3) THROTTLE1_SET

1253094 *** AXIS: Cntrl= 65820 (0x0001011c), Param= 16378 (0x00003ffa) THROTTLE1_SET

1253140 *** AXIS: Cntrl= 65820 (0x0001011c), Param= 16381 (0x00003ffd) THROTTLE1_SET

1253218 *** AXIS: Cntrl= 65820 (0x0001011c), Param= 16382 (0x00003ffe) THROTTLE1_SET

1253265 *** AXIS: Cntrl= 65820 (0x0001011c), Param= 16383 (0x00003fff) THROTTLE1_SET

1253359 *** AXIS: Cntrl= 65820 (0x0001011c), Param= 16384 (0x00004000) THROTTLE1_SET

1255465 *** AXIS: Cntrl= 65820 (0x0001011c), Param= 16271 (0x00003f8f) THROTTLE1_SET

1255543 *** AXIS: Cntrl= 65820 (0x0001011c), Param= 14597 (0x00003905) THROTTLE1_SET

1255590 *** AXIS: Cntrl= 65820 (0x0001011c), Param= 13186 (0x00003382) THROTTLE1_SET

1255636 *** AXIS: Cntrl= 65820 (0x0001011c), Param= 11783 (0x00002e07) THROTTLE1_SET

1255714 *** AXIS: Cntrl= 65820 (0x0001011c), Param= 8483 (0x00002123) THROTTLE1_SET

1255761 *** AXIS: Cntrl= 65820 (0x0001011c), Param= 6200 (0x00001838) THROTTLE1_SET

1255855 *** AXIS: Cntrl= 65820 (0x0001011c), Param= 2621 (0x00000a3d) THROTTLE1_SET

1255902 *** AXIS: Cntrl= 65820 (0x0001011c), Param= 975 (0x000003cf) THROTTLE1_SET

1255948 *** AXIS: Cntrl= 65820 (0x0001011c), Param= 218 (0x000000da) THROTTLE1_SET

1256026 *** AXIS: Cntrl= 65820 (0x0001011c), Param= 0 (0x00000000) THROTTLE1_SET

Link to comment
Share on other sites

this is what my ini.file is, I am only working on throttle #1 so disregard other throttle numbers.

[General]

UpdatedByVersion=4749e

History=VJ0C0KD10LE4MAW58D6RI

MouseWheelTrim=No

MouseWheelTrimSpeed=1

JoystickTimeout=20

FixControlAccel=No

FixMachSpeedBug=No

VisibilityOptions=No

OneCloudLayer=No

CloudTurbulence=No

CloudIcing=No

GenerateCirrus=No

SuppressCloudTurbulence=No

MaxIce=-4

MinIce=-4

UpperWindGusts=No

SuppressWindTurbulence=No

SuppressWindVariance=No

WindTurbulence=No

TurbulenceRate=1.0,5.0

TurbulenceDivisor=20,20,40,40

SuppressAllGusts=No

MaxSurfaceWind=0

WindLimitLevel=200

WindDiscardLevel=400

WindAjustAltitude=No

WindAjustAltitudeBy=2000

SmoothBySimTime=No

WindSmoothing=Yes

WindSmoothness=2

WindSmoothAirborneOnly=Yes

PressureSmoothness=0

TemperatureSmoothness=0

DisconnTrimForAP=No

ZeroElevForAPAlt=No

ThrottleSyncAll=No

WhiteMessages=No

ShowPMcontrols=No

SpoilerIncrement=512

MagicBattery=No

RudderSpikeRemoval=No

ElevatorSpikeRemoval=No

AileronSpikeRemoval=No

ReversedElevatorTrim=No

ClockSync=No

ClockSyncMins=5

ClearWeatherDynamics=No

OwnWeatherChanges=No

TimeForSelect=4

LoadFlightMenu=No

LoadPlanMenu=No

PauseAfterCrash=No

BrakeReleaseThreshold=75

SaveDataWithFlights=No

ZapSound=firework

ShortAircraftNameOk=No

UseProfiles=No

TCASid=Flight

TCASrange=40

AxisCalibration=No

DirectAxesToCalibs=No

ShowMultilineWindow=Yes

SuppressSingleline=No

SuppressMultilineFS=No

AxisIntercepts=No

DontResetAxes=No

WeatherReadFactor=2

WeatherRewriteSeconds=1

CustomWeatherModify=No

SimConnectStallTime=1

Console=No

PollGFTQ6=Yes

BlankDisplays=No

GetNearestAirports=No

LuaRerunDelay=66

EnableMouseLook=No

AxesWrongRange=No

InitDelay=0

ConsoleWindow=175,175,852,534

FSVersionUsed="Microsoft Flight Simulator X",10.0.61472.0

SimConnectUsed=10.0.61259.0

LogLua=Yes

LogWrites=Yes

LogReads=Yes

LogEvents=Yes

LogAxes=Yes

LogButtonsKeys=Yes

LogExtras=Yes

[JoyNames]

AutoAssignLetters=No

1=Logitech Extreme 3D

1.GUID={BCCF1070-741B-11DF-8001-444553540000}

2=Saitek Pro Flight Rudder Pedals

2.GUID={2F062140-1904-11E1-8001-444553540000}

0=CH Throttle Quadrant USB

0.GUID={27DAF2F0-5132-11E0-8003-444553540000}

[buttons]

ButtonRepeat=20,10

4=R1,4,C65607,0

5=R1,2,C65615,0

8=P1,3,C65758,0

9=P1,5,C65759,0

10=P0,5,CL3:T,1

12=R0,7,C65971,0

13=P0,16,CL3:R,1

[AutoSave]

AutoSaveEnabled=Yes

Interval=300

Files=10

SaveOnGround=No

Next=10

1=Thu 221534

2=Thu 222034

3=Thu 222533

4=Thu 223033

5=Thu 223532

6=Thu 224032

7=Mon 101538

8=Mon 102037

9=Mon 102537

10=Sun 152121

[GPSout]

GPSoutEnabled=No

Port=COM1

Speed=4800

Interval=2000

PosTo6Decimal=No

Sentences=

[GPSout2]

GPSoutEnabled=No

Port=<none set>

Speed=4800

Interval=2000

PosTo6Decimal=No

Sentences=

[WideServer]

WideFSenabled=Yes

[JoystickCalibration]

AllowSuppressForPFCquad=Yes

ExcludeThrottleSet=No

ExcludeMixtureSet=Yes

ExcludePropPitchSet=Yes

SepRevsJetsOnly=Yes

ApplyHeloTrim=No

UseAxisControlsForNRZ=No

FlapsSetControl=0

FlapDetents=No

ReverserControl=66292

Reverser1Control=66422

Reverser2Control=66425

Reverser3Control=66428

Reverser4Control=66431

MaxThrottleForReverser=256

AileronTrimControl=66731

RudderTrimControl=66732

CowlFlaps1Control=66162

CowlFlaps2Control=66163

CowlFlaps3Control=66164

CowlFlaps4Control=66165

SteeringTillerControl=0

MaxSteerSpeed=60

Aileron=-16380,-96,128,16380/8

Elevator=-16380,-32,128,16380/8

Rudder=-16254,-194,0,16380

Throttle=-16380,16380/16

Throttle1=-13652,-11052,-11052,16383/40

Throttle2=-15733,-14433,-11442,15232/40

Reverser=-16380,16380

Reverser1=-16380,16380

Reverser2=0,16380

LeftBrake=-16380,16380/16

RightBrake=-16380,16380/16

Throttle3=-15863,-13263,-11312,15232/40

Throttle4=-15863,-14433,-11572,15222/40

SyncSlopeThrottle2=26/26,30/31,55/55,94/96,127/128

SyncSlopeThrottle3=26/26,30/31,53/55,96/96,127/128

SyncSlopeThrottle4=26/26,30/31,55/55,100/96,127/128

SlewSide=-16380,-512,512,16380

Spoilers=-16384,-14433,-512,16383/16

Flaps=0,16380

[Axes]

0=0X,256,D,22,0,0,0

1=0Y,256

2=0Y,U,8320,16383,66079,0

3=0Y,D,-16384,-9102,66080,0

4=0Z,256,D,9,0,0,0

5=0R,256,F,66423,0,0,0

6=0U,256,F,66429,0,0,0

7=0V,256,F,66426,0,0,0

8=1X,256,D,1,38,0,0

9=1Y,256,D,2,39,0,0

10=1P,0,F,66416,0,0,0

11=2X,256,D,7,0,0,0

12=2Y,256,D,8,0,0,0

13=2R,256,D,3,0,0,0

[JoystickCalibration.Feelthere A320 IAE United 1]

AllowSuppressForPFCquad=Yes

ExcludeThrottleSet=No

ExcludeMixtureSet=Yes

ExcludePropPitchSet=Yes

SepRevsJetsOnly=Yes

ApplyHeloTrim=No

UseAxisControlsForNRZ=No

FlapsSetControl=0

FlapDetents=No

ReverserControl=66292

Reverser1Control=66422

Reverser2Control=66425

Reverser3Control=66428

Reverser4Control=66431

MaxThrottleForReverser=256

AileronTrimControl=66731

RudderTrimControl=66732

CowlFlaps1Control=66162

CowlFlaps2Control=66163

CowlFlaps3Control=66164

CowlFlaps4Control=66165

SteeringTillerControl=0

MaxSteerSpeed=60

Aileron=-15503,-738,770,15862

Elevator=-15503,-457,1050,15337

Rudder=-16380,-2846,2269,16380

Throttle=-16380,16380

Throttle1=-16384,-14953,-14043,14208

Throttle2=-16384,-14043,-11572,15351

Spoilers=-16384,15616/16

Reverser=-16380,16380

Reverser1=-16380,16380

Reverser2=0,16380

[Axes.Feelthere A320 IAE United 1]

0=0X,256,D,22,0,0,0

1=0U,256,F,65821,0,0,0

2=0V,256,F,65820,0,0,0

[buttons.Level D Simulations B767-300ER - United Airlines (circa 2011) N673UA]

0=P1,11,C66059,0

[sounds]

Path=C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\Sound\

Device1=Primary Sound Driver

Device2=Speakers (Realtek High Definition Audio)

Device3=Realtek Digital Output(Optical) (Realtek High Definition Audio)

Device4=Realtek Digital Output (Realtek High Definition Audio)

[Window.Radar Contact]

Docked=304, 13483, 3537, 2436

Undocked=2196, 550, 434, 197

[MacroFiles]

1=iFly737

2=leveld767

[LuaFiles]

1=ipcReady

2=linda

[Auto]

1=Lua ThrottleManager

[JoystickCalibration.PMDG 737-800NGX PMDG House Winglets]

AllowSuppressForPFCquad=Yes

ExcludeThrottleSet=No

ExcludeMixtureSet=Yes

ExcludePropPitchSet=Yes

SepRevsJetsOnly=Yes

ApplyHeloTrim=No

UseAxisControlsForNRZ=No

FlapsSetControl=0

FlapDetents=No

ReverserControl=66292

Reverser1Control=66422

Reverser2Control=66425

Reverser3Control=66428

Reverser4Control=66431

MaxThrottleForReverser=256

AileronTrimControl=66731

RudderTrimControl=66732

CowlFlaps1Control=66162

CowlFlaps2Control=66163

CowlFlaps3Control=66164

CowlFlaps4Control=66165

SteeringTillerControl=0

MaxSteerSpeed=60

Aileron=-15503,-738,770,15862

Elevator=-15503,-457,1050,15337

Rudder=-16380,-2846,2269,16380

Throttle=-16380,16380

Throttle1=-16384,-15213,-13783,14080

Throttle2=-16253,-14043,-12743,15351

Spoilers=-13263,15616/16

Reverser=-16380,16380

Reverser1=-16380,16380

Reverser2=0,16380

[Window.LUA display]

Docked=7413, 3243, 3537, 2436

[Monitor]

Display=15

Link to comment
Share on other sites

In the FSUIPC GUI in FSX enable Lua logging which will create a separate log file for every Lua script. If it then doesn't create one for ThrottleManager (ThrottleManager.log) it didn't start it the script.. ThrottleManager.lua is in you FSX/Modules directory correct (and it is .lua not .lua.txt or .txt)? If ThrottleManager.lua were in there, this section:

[LuaFiles]

1=ipcReady

2=linda

would list it. That section gets updated with any new Lua scripts placed in Modules, so at least you can check whether FSUIPC sees ThrottleManager. That tells me it's likely that the extension is not correct.

Link to comment
Share on other sites

in the throttle manager do I need to change anything in that before saving it to a lua file? Like engine numbers?

For the recap, this is what I did...

1- Opened up FSUIPC.INI and put a new line [Auto] 1=LUA ThrottleManager

2- Set up control axis for engine #1 per directions listed above

3- Save throttlemanager.txt as a lua.file

Link to comment
Share on other sites

in the throttle manager do I need to change anything in that before saving it to a lua file? Like engine numbers?

For the recap, this is what I did...

1- Opened up FSUIPC.INI and put a new line [Auto] 1=LUA ThrottleManager

2- Set up control axis for engine #1 per directions listed above

3- Save throttlemanager.txt as a lua.file

No, it's pre configured for the first two engines. If its not showing up in the section of the INI I mentined above tthen it's not in the Modules directory or it's not named .lua. You are not hiding extensions of known files are you, which could cause it to be named .lua.txt when you try to rename it?

Link to comment
Share on other sites

it is names lua, i double checked that.

so should the 1=LUA ThrottleManager be under the [LuaFiles] or I should make [Auto] up and place it there?

It should be in [Auto] that you create but FSUIPC would also add it to the [LuaFiles] section if it sees it in the directory. If it didn't update the INI with it, adding it to [Auto] won't do anything. You may want to post to the general forum to see if Pete can offer any ideas or ways to debug why it may not be seen. If its named .lua and it's in the same directory that ipcReady.lua is in (i see that in your INI) it should be visible and loading.

Link to comment
Share on other sites

It should not (but pick either ANSI or UTF8)... if after you place it into the Modules folder, run FSX, start a flight, exit FSX, it's not in FSUIPC.INI then for some reason FSUIPC is not seeing it. As a simple test, create a blank text file and save it in Modules called "test.lua" to see if that shows up in the LuaFiles section of the INI.

The other thing you can do is duplicate one of the existing .lua file (in case it's an extensions issue) rename it to ThrottleManager.lua, edit with Notepad, and paste the contents of the attached text file into it. This is just in case there is some issue with extensions.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use. Guidelines Privacy Policy We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.