Jump to content
The simFlight Network Forums
Sign in to follow this  
Von Rondstadd

Saitek Trottle contoller activate the reverser after engine start nr1 or shutdown problem !!

Recommended Posts

Hello,

I have a strange problem and not only I have this problem !!

I use saitek yoke and a seperate throttle quadrant all setup through FSUIPC.

When I start engine nr1 the reverser of nr1 is being activated, also when I shutdown engine nr1 !!!!

This only happens with engine nr 1 and not nr 2

I did see a movie from somebody else and he too has this problem !!

put the mouse on the slider at arround point 2:18 and you can see it !!!!

Anybody can tell how to fix it ????

Kind regards Robert

Share this post


Link to post
Share on other sites

I use saitek yoke and a seperate throttle quadrant all setup through FSUIPC.

When I start engine nr1 the reverser of nr1 is being activated, also when I shutdown engine nr1 !!!!

This only happens with engine nr 1 and not nr 2

Is this with a default aircraft too, or only the PMDG NGX?

It sounds very much as if you have dual assignments to the same throttle and one of them is not correctly calibrated, though why this is affecting things only when you start or shut down is a bit odd. When does it occur -- when you operate the fuel cutoff/idle levers (the start levers)? How are those assigned? How have you assigned reversers?

I cannot advise without further information. Please show me your FSUIPC4.INI file, and also enable Axis logging in FSUIPC options and show me the part of the log where you start the engine.

Pete

Share this post


Link to post
Share on other sites

Hi Pete,

I didn't know about default aircraft, but I tried it and no problem with default planes!

It's the PMDG 737NGX

It happens only to engine nr 1 when I move the start lever down when I arrived at the gate and want to shutdown engine!

And like in the movie from somebody else when I want to start the engine nr 1, I move the start lever up!

Have no start lever assigned through FSUIPC!

Cant discover any dual assignments.

snap2011102908h11m58s00.png

I only have selected direct !

post-127750-0-50601400-1332270891.jpg

Share this post


Link to post
Share on other sites

I didn't know about default aircraft, but I tried it and no problem with default planes!

It's the PMDG 737NGX

Let's see the log, as requested. Mmaybe the throttle is sending spurious button presses. Also please post the INI file as requested. Pictures might mean more to you but they canot show dual assignments nor are they as precise as the actual data, which is why I asked to see it.

Pete

Share this post


Link to post
Share on other sites

Hi Pete, here is my FSUIPC4.INI file.

enable Axis logging in FSUIPC options??

You mean in tab loggin select Axis controls and klick send to console window????

And is a log from shutting down engine oké??

[General]

UpdatedByVersion=4811

History=00AKVY1G898TU9FG6KCXM

MouseWheelTrim=No

MouseWheelTrimSpeed=1

JoystickTimeout=20

FixControlAccel=No

FixMachSpeedBug=No

VisibilityOptions=No

OneCloudLayer=No

CloudTurbulence=No

CloudIcing=No

GenerateCirrus=No

SuppressCloudTurbulence=No

MaxIce=-4

MinIce=-4

UpperWindGusts=No

SuppressWindTurbulence=No

SuppressWindVariance=No

WindTurbulence=No

TurbulenceRate=1.0,5.0

TurbulenceDivisor=20,20,40,40

SuppressAllGusts=No

MaxSurfaceWind=0

WindLimitLevel=200

WindDiscardLevel=400

WindAjustAltitude=No

WindAjustAltitudeBy=2000

SmoothBySimTime=No

WindSmoothing=No

WindSmoothness=2

WindSmoothAirborneOnly=Yes

PressureSmoothness=0

TemperatureSmoothness=0

DisconnTrimForAP=No

ZeroElevForAPAlt=No

ThrottleSyncAll=No

WhiteMessages=No

ShowPMcontrols=No

SpoilerIncrement=512

MagicBattery=No

RudderSpikeRemoval=No

ElevatorSpikeRemoval=No

AileronSpikeRemoval=No

ReversedElevatorTrim=No

ClockSync=No

ClockSyncMins=5

ClearWeatherDynamics=No

OwnWeatherChanges=No

TimeForSelect=4

LoadFlightMenu=No

LoadPlanMenu=No

PauseAfterCrash=No

BrakeReleaseThreshold=75

SaveDataWithFlights=No

ZapSound=firework

ShortAircraftNameOk=No

UseProfiles=Yes

TCASid=Flight

TCASrange=40

AxisCalibration=No

DirectAxesToCalibs=No

ShowMultilineWindow=Yes

SuppressSingleline=No

SuppressMultilineFS=No

AxisIntercepts=No

DontResetAxes=No

WeatherReadFactor=2

WeatherRewriteSeconds=1

CustomWeatherModify=No

SimConnectStallTime=1

Console=No

PollGFTQ6=Yes

BlankDisplays=No

GetNearestAirports=Yes

LuaRerunDelay=66

EnableMouseLook=No

AxesWrongRange=No

InitDelay=0

DeleteVehiclesForAES=Yes

MouseWheelMove=No

FSVersionUsed="Microsoft Flight Simulator X",10.0.61637.0

SimConnectUsed=10.0.61259.0

[JoyNames]

AutoAssignLetters=No

0=Saitek Pro Flight Rudder Pedals

0.GUID={47D4D5B0-53CC-11E1-8001-444553540000}

1=Saitek Pro Flight Yoke

1.GUID={9DBD7AE0-53CC-11E1-8001-444553540000}

2=Saitek Pro Flight Throttle Quadrant

2.GUID={DDF5C1D0-53CC-11E1-8001-444553540000}

[buttons]

ButtonRepeat=20,10

1=P0,2,C65656,0

2=P0,3,C65655,0

3=R0,0,C65875,0

5=P0,4,C65607,0

6=P0,5,C65615,0

7=P0,7,C65567,0

8=P0,6,C65749,0

9=P0,14,C66079,0

10=P0,15,C66080,0

11=P0,18,C65752,0

15=P1,18,C65752,0

16=P1,2,C65656,0

17=P1,3,C65655,0

18=P1,0,C65875,0

21=P1,6,C65749,0

22=P1,7,C65567,0

23=R1,32,C65734,0

24=R1,36,C65735,0

25=R1,38,C65671,0

26=R1,34,C65672,0

27=R1,33,C65856,0

28=R1,35,C65857,0

29=R1,37,C65855,0

30=R1,39,C65854,0

31=P1,5,C65607,0

32=P1,4,C65615,0

35=R1,21,C65966,0

37=R1,22,C65971,0

38=U1,21,C65967,0

39=U1,22,C65972,0

[AutoSave]

AutoSaveEnabled=No

Interval=300

Files=10

SaveOnGround=No

Next=4

1=Tue 141732

2=Tue 143230

3=Tue 151423

4=Mon 160746

5=Mon 161246

6=Mon 161745

7=Mon 162245

8=Mon 162744

9=Tue 120901

10=Tue 121900

[GPSout]

GPSoutEnabled=No

Port=COM1

Speed=4800

Interval=2000

PosTo6Decimal=No

Sentences=

[GPSout2]

GPSoutEnabled=No

Port=<none set>

Speed=4800

Interval=2000

PosTo6Decimal=No

Sentences=

[WideServer]

WideFSenabled=Yes

[Axes]

0=0X,256,D,0,1,0,0

1=0Y,256,D,2,0,0,0

2=0P,0,F,0,0,66416,0

3=1X,256,D,7,0,0,0

4=1Y,256,D,0,8,0,0

5=1R,256,D,0,0,0,3

[JoystickCalibration]

AllowSuppressForPFCquad=Yes

ExcludeThrottleSet=No

ExcludeMixtureSet=Yes

ExcludePropPitchSet=Yes

SepRevsJetsOnly=No

ApplyHeloTrim=No

UseAxisControlsForNRZ=Yes

FlapsSetControl=0

FlapDetents=No

ReverserControl=66292

Reverser1Control=66422

Reverser2Control=66425

Reverser3Control=66428

Reverser4Control=66431

MaxThrottleForReverser=256

AileronTrimControl=66731

RudderTrimControl=66732

CowlFlaps1Control=66162

CowlFlaps2Control=66163

CowlFlaps3Control=66164

CowlFlaps4Control=66165

SteeringTillerControl=0

MaxSteerSpeed=60

Aileron=-16380,0,0,16380

Elevator=-16380,0,0,16380

Rudder=-16384,0,0,16383

SlopeRudder=-2

LeftBrake=-16384,16383/16

SlopeLeftBrake=-5

RightBrake=-16384,16383/16

SlopeRightBrake=-5

Throttle1=-16384,-16384,-16384,16383

Throttle2=-16384,-16384,-16384,16383

SyncSlopeThrottle2=26/26

Flaps=-16384,16383/16

[Profile.Twee motoren]

1=PMDG 737-800NGX PMDG House Winglets

2=Boeing 737-800NGX PMDG House

3=Boeing 737-8K2NGX KLM Royal Dutch Airlines Winglets

4=Level D Simulations B767-300ER - UK International Airlines - 002

5=Boeing 737-9K2NGX KLM Royal Dutch Airlines Skyteam Winglets

6=Boeing 737-8K2NGX Transavia Airlines Winglets

7=Boeing 737-8ASNGX Ryanair Winglets

8=Boeing 737-8K5NGX TUIfly Winglets

9=Boeing 737-9K2NGX KLM Royal Dutch Airlines Winglets

10=Boeing 737-800NGX ANA Winglets

11=Boeing 737-86NNGX kulula.com (Flying 101) Winglets

12=Boeing 737-8K2NGX KLM Royal Dutch Airlines White Nose Winglets

13=Bombardier CRJ 700 Paint1

14=Boeing 737-8HXNGX Sunwing Airlines

15=Boeing 737-8H4NGX Southwest Warrior One

16=Boeing 737-800 Paint4

[Axes.Twee motoren]

0=0X,256,D,0,7,0,0

1=0Y,256,D,0,0,8,0

2=0R,256,D,3,0,0,0

3=0V,256,D,0,0,23,0

4=0P,0,F,0,0,66416,0

5=1X,256,D,1,0,0,0

6=1Y,256,D,0,2,0,0

7=1Z,256,D,22,0,0,0

8=1U,256,D,0,9,0,0

9=1V,256,D,0,0,10,0

10=2X,1,D,36,0,0,0

11=2Y,256,D,23,0,0,0

12=2Z,8322,F,M1:3,M1:2,M1:1,0

13=2Z,D,-16384,-8062,M1:3,0

14=2Z,B,-3641,5760,M1:2,0

15=2Z,U,11776,16383,M1:1,0

[JoystickCalibration.Twee motoren]

AllowSuppressForPFCquad=Yes

ExcludeThrottleSet=Yes

ExcludeMixtureSet=Yes

ExcludePropPitchSet=Yes

SepRevsJetsOnly=No

ApplyHeloTrim=No

UseAxisControlsForNRZ=No

FlapsSetControl=0

FlapDetents=No

ReverserControl=66292

Reverser1Control=66422

Reverser2Control=66425

Reverser3Control=66428

Reverser4Control=66431

MaxThrottleForReverser=256

AileronTrimControl=66731

RudderTrimControl=66732

CowlFlaps1Control=66162

CowlFlaps2Control=66163

CowlFlaps3Control=66164

CowlFlaps4Control=66165

SteeringTillerControl=0

MaxSteerSpeed=60

Aileron=-16384,0,0,16383

Elevator=-16159,0,0,16383

Flaps=-16383,16253/24

Rudder=-16384,0,0,16383/8

LeftBrake=-16383,16384/16

SlopeLeftBrake=15

RightBrake=-16383,16384/16

SlopeRightBrake=15

Spoilers=-16128,16380/16

Reverser1=0,0

SteeringTiller=-16384,-2991,4480,16383/8

SlopeSteeringTiller=4

SlopeRudder=7

Throttle1=-16384,-16384,-16384,16383/40

Throttle2=-16384,-16384,-16384,16383/32

SyncSlopeThrottle2=15/19,48/49,80/77,127/127

[buttons.Twee motoren]

0=R0,20,C3,0

1=R0,21,C65971,0

[Profile.Vier motoren]

1=PMDG 747-8i KLM Royal Dutch Airlines

[Axes.Vier motoren]

0=0X,256,D,0,1,0,0

1=0Y,256,D,2,0,0,0

2=0Z,256,D,22,0,0,0

3=0U,256,D,0,9,0,0

4=0V,256,D,0,0,10,0

5=0P,0,F,0,0,66416,0

6=1X,256,D,7,0,0,0

7=1Y,256,D,0,8,0,0

8=1R,256,D,0,0,0,3

9=2X,256,D,0,0,0,11

10=2Y,256,D,12,0,0,0

11=2Z,256,D,0,23,0,0

[JoystickCalibration.Vier motoren]

AllowSuppressForPFCquad=Yes

ExcludeThrottleSet=Yes

ExcludeMixtureSet=Yes

ExcludePropPitchSet=Yes

SepRevsJetsOnly=No

ApplyHeloTrim=No

UseAxisControlsForNRZ=No

FlapsSetControl=0

FlapDetents=No

ReverserControl=66292

Reverser1Control=66422

Reverser2Control=66425

Reverser3Control=66428

Reverser4Control=66431

MaxThrottleForReverser=256

AileronTrimControl=66731

RudderTrimControl=66732

CowlFlaps1Control=66162

CowlFlaps2Control=66163

CowlFlaps3Control=66164

CowlFlaps4Control=66165

SteeringTillerControl=0

MaxSteerSpeed=60

Aileron=-16380,0,0,16380

Elevator=-16380,0,0,16380

Rudder=-16384,0,0,16383

SlopeRudder=-2

LeftBrake=-16384,16383/16

SlopeLeftBrake=-5

RightBrake=-16384,16383

SlopeRightBrake=-5

Throttle1=-16384,-16384,-16384,16383

Throttle2=-16384,-16384,-16384,16383

Throttle3=-16384,-16384,-16384,16383

Throttle4=-16384,-16384,-16384,16383

Spoilers=-16384,16383/16

Flaps=-16384,16383/16

[buttons.Vier motoren]

0=R0,21,C65966,0

1=R0,22,C65971,0

2=R2,6,C65976,0

3=R2,7,C65981,0

[Profile.één motor]

1=Cessna Skyhawk 172SP Paint2

2=Aircreation582SL red

3=Spitfire Mk IIb P8385

4=Spitfire Mk Ia R6835

5=Spitfire Mk Ia N3249

[Axes.één motor]

0=0X,256,D,0,1,0,0

1=0Y,256,D,2,0,0,0

2=0Z,256,D,4,0,0,0

3=0U,256,D,4,0,0,0

4=0V,256,D,0,23,0,0

5=0P,0,F,0,0,66416,0

6=1X,256,D,7,0,0,0

7=1Y,256,D,0,8,0,0

8=1R,256,D,0,0,0,3

[JoystickCalibration.één motor]

AllowSuppressForPFCquad=Yes

ExcludeThrottleSet=Yes

ExcludeMixtureSet=Yes

ExcludePropPitchSet=Yes

SepRevsJetsOnly=No

ApplyHeloTrim=No

UseAxisControlsForNRZ=No

FlapsSetControl=0

FlapDetents=No

ReverserControl=66292

Reverser1Control=66422

Reverser2Control=66425

Reverser3Control=66428

Reverser4Control=66431

MaxThrottleForReverser=256

AileronTrimControl=66731

RudderTrimControl=66732

CowlFlaps1Control=66162

CowlFlaps2Control=66163

CowlFlaps3Control=66164

CowlFlaps4Control=66165

SteeringTillerControl=0

MaxSteerSpeed=60

Aileron=-16380,0,0,16380

Elevator=-16380,0,0,16380

Rudder=-16384,0,0,16383

SlopeRudder=-2

Throttle=-16384,16383

LeftBrake=-16384,16383/16

SlopeLeftBrake=-5

RightBrake=-16384,16383/16

SlopeRightBrake=-5

Flaps=-16384,16383/16

[Profile.Vier motoren propellor]

1=CS C130X 2

[Axes.Vier motoren propellor]

0=0X,256,D,0,1,0,0

1=0Y,256,D,2,0,0,0

2=0U,256,D,0,9,0,0

3=0V,256,D,0,0,10,0

4=0P,0,F,0,0,66416,0

5=1X,256,D,7,0,0,0

6=1Y,256,D,0,8,0,0

7=1R,256,D,0,0,0,3

8=2X,256,D,0,0,0,11

9=2Y,256,D,12,0,0,0

10=2Z,256,D,0,23,0,0

[JoystickCalibration.Vier motoren propellor]

AllowSuppressForPFCquad=Yes

ExcludeThrottleSet=Yes

ExcludeMixtureSet=Yes

ExcludePropPitchSet=Yes

SepRevsJetsOnly=No

ApplyHeloTrim=No

UseAxisControlsForNRZ=No

FlapsSetControl=0

FlapDetents=No

ReverserControl=66292

Reverser1Control=66422

Reverser2Control=66425

Reverser3Control=66428

Reverser4Control=66431

MaxThrottleForReverser=256

AileronTrimControl=66731

RudderTrimControl=66732

CowlFlaps1Control=66162

CowlFlaps2Control=66163

CowlFlaps3Control=66164

CowlFlaps4Control=66165

SteeringTillerControl=0

MaxSteerSpeed=60

Aileron=-16380,0,0,16380

Elevator=-16380,0,0,16380

Rudder=-16384,0,0,16383

SlopeRudder=-2

LeftBrake=-16384,16383/16

SlopeLeftBrake=-5

RightBrake=-16384,16383/16

SlopeRightBrake=-5

Throttle1=-16384,-16384,-16384,16383

Throttle2=-16384,-16384,-16384,16383

Throttle3=-16384,-16384,-16384,16383

Throttle4=-16384,-16384,-16384,16383

SyncSlopeThrottle2=26/26

SyncSlopeThrottle3=26/26

SyncSlopeThrottle4=26/26

Flaps=-16384,16383/16

[buttons.Vier motoren propellor]

4=R0,21,C65966,0

5=R0,22,C65971,0

6=R2,6,C65976,0

7=R2,7,C65981,0

[Profile.Jet]

1=Harrier_FRS1

2=Harrier_FRS1B

3=Harrier_GR3D

4=Harrier_GR3

[Axes.Jet]

0=0X,256,D,0,1,0,0

1=0Y,256,D,2,0,0,0

2=0Z,256,D,4,0,0,0

3=0P,0,F,0,0,66416,0

4=1X,256,D,7,0,0,0

5=1Y,256,D,0,8,0,0

6=1R,256,D,0,0,0,3

[buttons.Jet]

0=P0,10,C66079,0

1=P0,6,C66080,0

2=P0,7,C65752,0

3=P0,0,C65875,0

[JoystickCalibration.Jet]

AllowSuppressForPFCquad=Yes

ExcludeThrottleSet=Yes

ExcludeMixtureSet=Yes

ExcludePropPitchSet=Yes

SepRevsJetsOnly=No

ApplyHeloTrim=No

UseAxisControlsForNRZ=No

FlapsSetControl=0

FlapDetents=No

ReverserControl=66292

Reverser1Control=66422

Reverser2Control=66425

Reverser3Control=66428

Reverser4Control=66431

MaxThrottleForReverser=256

AileronTrimControl=66731

RudderTrimControl=66732

CowlFlaps1Control=66162

CowlFlaps2Control=66163

CowlFlaps3Control=66164

CowlFlaps4Control=66165

SteeringTillerControl=0

MaxSteerSpeed=60

Aileron=-16380,0,0,16380

Elevator=-16384,0,0,16383

Rudder=-16384,0,0,16383

SlopeRudder=-2

Throttle=-16384,16383

LeftBrake=-16384,16383/16

SlopeLeftBrake=-5

RightBrake=-16384,16383/16

SlopeRightBrake=-5

[sounds]

Path=D:\Flight Simulator X\Sound\

Device1=Primary Sound Driver

Device2=Luidsprekers (Realtek High Definition Audio)

Device3=Digitale uitvoer (C-Media PCI Audio Device)

Device4=Luidsprekers (C-Media PCI Audio Device)

Device5=Realtek Digital Output (Realtek High Definition Audio)

[MacroFiles]

1=737NGX

Share this post


Link to post
Share on other sites

here is my FSUIPC4.INI file.

A couple of oddities showing in that. the Profile being used for the 737 NGX has:

UseAxisControlsForNRZ=No

even though you changed this for default assignments (no profile). I think most NGX users find that they need this set to "Yes".

The pictures you showed earlier was with an Axis section for one Profile but a Buttons section from a different profile, and NEITHER of them were from your main NGX profile "Twee motoren". In fact i cannot relate your INI file to the pictures you sent originally at all. Are you sure they are fromthe same FSX installation?

Also you have filtering enabled for throttle 1 but not throttles 2. Why? I'd generally recommend no filtering at all.

enable Axis logging in FSUIPC options??

You mean in tab loggin Axis controls and klick send to console window????

And is a log from shutting down engine oké??

Axis event logging, check.

Don't bother about console window -- I can't see your PC from here and I don't want a picture, but a log.

Shutting down or starting up, whichever.

And you haven't said WHEN exactly the reverser engages (what switch -- starter, fuel to idle, what?). Nor have you said how you operate the starters.

Regards

Pete

Share this post


Link to post
Share on other sites

Hi Pete,

Very strange things you mention, I really don't know setting these things and yes it's from the same FSX installation!

UseAxisControlsForNRZ=No (I know that I changed that after reading it about PMDG 737NGX only changed the wrong one !!)

Also you have filtering enabled for throttle 1 but not throttles 2. Why? I'd generally recommend no filtering at all.

I do not know where I must change that and why it's enabled for throttle 1 and not 2??

Axis event logging ( I only see Events (non-axis control) and (Axis controls)

It happens only to engine nr 1 when I move the start lever down when I arrived at the gate and want to shutdown engine!

And like in the movie from somebody else when I want to start the engine nr 1, I move the start lever up!

Have no start lever assigned through FSUIPC!

Maybe it's better for me to do a new FSUICP installation or a new setup profile because I only fly the PMDG 737NGX and Spitfire?

What do you recommend??

How can I uninstall it?

Kind regards Robert!

Share this post


Link to post
Share on other sites

Also you have filtering enabled for throttle 1 but not throttles 2. Why? I'd generally recommend no filtering at all.

I do not know where I must change that and why it's enabled for throttle 1 and not 2??

Because you have the filter option checked for Throttle1 and not for Throttle2, that is why.

All these things are described in the User Guide, and there ARE pictures too. I tohught you liked pictures? Why not look these things up?

Axis event logging ( I only see Events (non-axis control) and (Axis controls)

I shall include Events (non-axis control) hope that is the correct one!

Why "non-axis" when i explicitly asked you to log axis events? Please do read the words I write, or this is going to take weeks. As it is I've got to go out soon, so it will probably take another day now. Then I'm away over the weekend, from Friday.

It happens only to engine nr 1 when I move the start lever down when I arrived at the gate and want to shutdown engine!

And like in the movie from somebody else when I want to start the engine nr 1, I move the start lever up!

Have no start lever assigned through FSUIPC!

So i saw. So how is it assigned? Obviously this reverse engagement is triggered by that, whatever it is. Have you asked PMDG support, since it is only happening with their aircraft?

How can I uninstall it?

There is a section in the User Guide which tells you that. Why not use the documentation?

If you don't want to use FSUIPC, just delete the FSUIPC4.DLL from the Modules folder. If, on the other hand you want to start again with all your settings, just delete the FSUIPC4.INI file.

Pete

Share this post


Link to post
Share on other sites

Sorry Pete,

Here is Axis controls

Have not asked them yet because they say FSUIPC can give problems, but I shall ask them!

So i saw. So how is it assigned? Obviously this reverse engagement is triggered by that, whatever it is. Have you asked PMDG support, since it is only happening with their aircraft? I use the mouse and klick on it to control it!!

Kind regards Robert

********* FSUIPC4, Version 4.811 by Pete Dowson *********

User Name="-----------------"

User Addr="--------------------"

FSUIPC4 Key is provided

WIDEFS7 not user registered, or expired

Running inside FSX on Windows 7

Module base=61000000

47 System time = 28/03/2012 18:55:05

47 FLT path = "C:\Users\---------------\Documents\Flight Simulator X Files\"

78 Trying to connect to SimConnect Acc/SP2 Oct07 ...

78 FS path = "D:\Flight Simulator X\"

437 LogOptions=10000000 00000001

437 Wind smoothing fix is fully installed

437 G3D.DLL fix attempt installed ok

452 SimConnect_Open succeeded: waiting to check version okay

452 Trying to use SimConnect Acc/SP2 Oct07

1404 Running in "Microsoft Flight Simulator X", Version: 10.0.61637.0 (SimConnect: 10.0.61259.0)

1404 Initialising SimConnect data requests now

1404 FSUIPC Menu entry added

1435 D:\Flight Simulator X\FLIGHTS\OTHER\FLTSIM.FLT

1435 D:\Flight Simulator X\SimObjects\Airplanes\Aircreation_582SL\Aircreation_582SL.AIR

26785 D:\Flight Simulator X\SimObjects\Airplanes\PMDG 737-800NGX WL\B737-800WL.AIR

38750 System time = 28/03/2012 18:55:44, Simulator time = 12:59:50 (11:59Z)

38813 Aircraft="Boeing 737-8H4NGX Southwest Warrior One"

74319 Starting everything now ...

74319 AES Link established

76924 *** AXIS: Cntrl= 66420 (0x00010374), Param= -8850 (0xffffdd6e) AXIS_THROTTLE1_SET

76924 *** AXIS: Cntrl= 66423 (0x00010377), Param= -8850 (0xffffdd6e) AXIS_THROTTLE2_SET

77002 *** AXIS: Cntrl= 66420 (0x00010374), Param= -12921 (0xffffcd87) AXIS_THROTTLE1_SET

77002 *** AXIS: Cntrl= 66423 (0x00010377), Param= -12921 (0xffffcd87) AXIS_THROTTLE2_SET

77080 *** AXIS: Cntrl= 66420 (0x00010374), Param= -14792 (0xffffc638) AXIS_THROTTLE1_SET

77080 *** AXIS: Cntrl= 66423 (0x00010377), Param= -14792 (0xffffc638) AXIS_THROTTLE2_SET

77080 *** AXIS: Cntrl= 66420 (0x00010374), Param= -15653 (0xffffc2db) AXIS_THROTTLE1_SET

77080 *** AXIS: Cntrl= 66423 (0x00010377), Param= -15653 (0xffffc2db) AXIS_THROTTLE2_SET

77173 *** AXIS: Cntrl= 66420 (0x00010374), Param= -16049 (0xffffc14f) AXIS_THROTTLE1_SET

77173 *** AXIS: Cntrl= 66423 (0x00010377), Param= -16049 (0xffffc14f) AXIS_THROTTLE2_SET

77251 *** AXIS: Cntrl= 66420 (0x00010374), Param= -16231 (0xffffc099) AXIS_THROTTLE1_SET

77251 *** AXIS: Cntrl= 66423 (0x00010377), Param= -16231 (0xffffc099) AXIS_THROTTLE2_SET

77329 *** AXIS: Cntrl= 66420 (0x00010374), Param= -16315 (0xffffc045) AXIS_THROTTLE1_SET

77329 *** AXIS: Cntrl= 66423 (0x00010377), Param= -16315 (0xffffc045) AXIS_THROTTLE2_SET

77392 *** AXIS: Cntrl= 66420 (0x00010374), Param= -16353 (0xffffc01f) AXIS_THROTTLE1_SET

77392 *** AXIS: Cntrl= 66423 (0x00010377), Param= -16353 (0xffffc01f) AXIS_THROTTLE2_SET

77392 *** AXIS: Cntrl= 66420 (0x00010374), Param= -16371 (0xffffc00d) AXIS_THROTTLE1_SET

77392 *** AXIS: Cntrl= 66423 (0x00010377), Param= -16371 (0xffffc00d) AXIS_THROTTLE2_SET

77470 *** AXIS: Cntrl= 66420 (0x00010374), Param= -16379 (0xffffc005) AXIS_THROTTLE1_SET

77470 *** AXIS: Cntrl= 66423 (0x00010377), Param= -16379 (0xffffc005) AXIS_THROTTLE2_SET

77548 *** AXIS: Cntrl= 66420 (0x00010374), Param= -16384 (0xffffc000) AXIS_THROTTLE1_SET

77548 *** AXIS: Cntrl= 66423 (0x00010377), Param= -16384 (0xffffc000) AXIS_THROTTLE2_SET

77657 Advanced Weather Interface Enabled

98031 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

98062 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

98093 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

98124 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

98156 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

98187 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

98218 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

98249 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

98280 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

98312 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

98343 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

98374 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

98405 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

98436 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

98468 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

98499 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

98530 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

98561 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

98592 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

98624 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

98655 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

98686 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

98717 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

98748 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

98780 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

98811 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

98842 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

98873 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

98904 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

98951 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

98967 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

99185 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

99232 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

99263 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

99279 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

99326 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

99357 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

99388 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

99419 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

99450 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

99482 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

99513 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

99544 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

99575 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

99606 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

99638 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

99669 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

99700 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

99731 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

99762 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

99794 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

99825 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

99856 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

99887 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

99918 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

99950 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

99981 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

100012 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

100043 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

100074 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

100106 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

100137 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

100168 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

100199 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

100230 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

100262 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

100293 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

100324 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

100355 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

100386 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

100418 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

100449 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

100480 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

100511 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

100542 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

100574 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

100605 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

100636 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

100667 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

100698 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

100730 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

100761 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

100792 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

100823 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

100854 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

100886 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

100917 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

100948 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

100979 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

101010 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

101042 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

101073 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

101104 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

101135 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

101166 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

101198 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

101229 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

101260 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

101291 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

101322 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

101354 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

101385 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

101416 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

101447 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

101478 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

101510 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

101541 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

101572 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

101603 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

101634 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

101666 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

101697 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

101728 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

101759 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

101790 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

101822 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

101853 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

101884 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

101915 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

101946 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

101978 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

102009 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

102040 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

102071 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

102102 *** AXIS: Cntrl= 66162 (0x00010272), Param= 1 (0x00000001) COWLFLAP1_SET

102726 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

102758 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

102789 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

102820 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

102851 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

102882 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

102914 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

102945 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

102976 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

103007 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

103038 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

103070 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

103101 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

103132 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

103163 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

103194 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

103226 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

103257 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

103288 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

103319 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

103350 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

103382 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

103413 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

103444 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

103475 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

103506 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

103538 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

103569 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

103600 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

103631 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

103662 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

103694 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

103725 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

103756 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

103787 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

103818 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

103850 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

103881 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

103912 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

103943 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

103974 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

104006 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

104037 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

104068 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

104099 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

104130 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

104162 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

104193 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

104224 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

104255 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

104286 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

104318 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

104349 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

104380 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

104411 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

104442 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

104474 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

104505 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

104536 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

104536 *** AXIS: Cntrl= 65919 (0x0001017f), Param= 0 (0x00000000) MIXTURE1_SET

104536 *** AXIS: Cntrl= 65820 (0x0001011c), Param= 0 (0x00000000) THROTTLE1_SET

104567 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

104598 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

104630 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

104676 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

104708 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

104723 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

104770 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

104801 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

104832 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

104864 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

104895 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

104926 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

104957 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

104988 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

105020 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

105051 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

105082 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

105113 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

105144 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

105176 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

105207 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

105238 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

105269 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

105300 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

105332 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

105363 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

105394 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

105425 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

105456 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

105488 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

105519 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

105550 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

105581 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

105612 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

105644 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

105675 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

105706 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

105737 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

105768 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

105800 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

105831 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

105862 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

105893 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

105924 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

105956 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

105987 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

106018 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

106049 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

106080 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

106112 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

106143 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

106174 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

106205 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

106236 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

106268 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

106299 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

106330 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

106377 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

106377 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

106408 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

106439 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

106470 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

106502 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

106533 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

106564 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

106595 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

106626 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

106658 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

106689 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

106720 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

106751 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

106782 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

106814 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

106845 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

106876 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

106907 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

106938 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

106970 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

107001 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

107032 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

107063 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

107094 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

107126 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

107157 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

107188 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

107219 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

107250 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

107282 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

107313 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

107344 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

107391 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

107406 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

107438 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

107484 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

107516 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

107531 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

107578 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

107609 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

107625 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

107672 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

107703 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

107734 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

107765 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

107796 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

107828 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

107859 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

107890 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

107921 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

107952 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

107984 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

108015 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

108046 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

108077 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

108108 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

108140 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

108171 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

108202 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

108233 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

108264 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

108296 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

108327 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

108358 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

108389 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

108420 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

108452 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

108483 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

108514 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

108545 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

108576 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

108608 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

108639 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

108670 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

108701 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

108732 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

108764 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

108795 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

108826 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

108857 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

108888 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

108920 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

108951 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

108982 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

109013 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

109044 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

109076 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

109107 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

109138 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

109169 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

109200 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

109232 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

109263 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

109294 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

109325 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

109356 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

109388 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

109419 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

109450 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

109481 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

109512 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

109544 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

109575 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

109606 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

109653 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

109668 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

109700 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

109746 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

109778 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

109809 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

109840 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

109871 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

109902 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

109934 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

109965 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

109996 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

110027 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

110058 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

110090 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

110121 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

110152 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

110183 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

110214 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

110246 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

110277 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

110308 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

110339 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

110370 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

110402 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

110433 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

110464 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

110495 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

110526 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

110558 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

110589 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

110620 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

110651 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

110682 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

110714 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

110745 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

110776 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

110807 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

110838 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

110870 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

110901 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

110932 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

110963 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

110994 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

111026 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

111057 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

111088 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

111119 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

111150 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

111182 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

111213 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

111260 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

111291 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

111306 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

111353 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

111384 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

111416 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

111447 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

111478 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

111509 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

111540 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

111572 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

111603 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

111634 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

111665 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

111696 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

111728 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

111759 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

111790 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

111821 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

111852 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

111884 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

111915 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

111946 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

111977 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

112008 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

112040 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

112071 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

112102 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

112133 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

112164 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

112196 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

112227 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

112258 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

112289 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

112320 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

112352 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

112383 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

112414 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

112445 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

112492 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

112508 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

112539 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

112586 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

112617 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

112648 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

112679 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

112710 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

112742 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

112773 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

112804 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

112835 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

112866 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

112898 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

112929 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

112960 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

112991 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

113022 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

113054 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

113085 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

113116 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

113147 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

113178 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

113210 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

113241 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

113272 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

113303 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

113334 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

113366 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

113397 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

113428 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

113459 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

113490 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

113522 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

113553 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

113584 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

113615 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

113646 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

113678 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

113709 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

113740 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

113771 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

113802 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

113834 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

113865 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

113896 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

113927 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

113958 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

113990 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

114021 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

114052 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

114083 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

114114 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

114146 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

114192 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

114208 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

114239 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

114286 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

114317 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

114333 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

114380 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

114411 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

114442 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

114473 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

114504 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

114536 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

114567 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

114598 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

114629 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

114660 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

114692 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

114723 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

114754 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

114785 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

114816 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

114848 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

114879 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

114910 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

114941 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

114972 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

115004 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

115035 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

115066 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

115097 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

115128 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

115160 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

115191 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

115222 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

115253 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

115284 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

115316 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

115347 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

115378 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

115409 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

115440 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

115472 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

115503 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

115534 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

115565 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

115596 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

115628 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

115659 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

115690 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

115721 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

115752 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

115784 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

115815 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

115846 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

115877 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

115908 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

115940 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

115971 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

116002 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

116033 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

116080 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

116096 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

116127 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

116174 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

116205 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

116220 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

116267 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

116298 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

116330 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

116361 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

116392 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

116423 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

116454 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

116486 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

116517 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

116548 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

116579 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

116610 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

116642 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

116673 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

116704 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

116735 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

116766 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

125815 *** AXIS: Cntrl= 66162 (0x00010272), Param= 1 (0x00000001) COWLFLAP1_SET

125877 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

125908 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

127562 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET

128155 *** AXIS: Cntrl= 65920 (0x00010180), Param= 0 (0x00000000) MIXTURE2_SET

146797 AES version 2.21 active at airport EGAA (default vehicles deleted)

160759 Sim stopped: average frame rate for last 87 secs = 35.7 fps

165891 Weather Mode now = Theme

165891 C:\Users\RFde Bruijn\AppData\Roaming\Microsoft\FSX\Previous flight.FLT

174502 System time = 28/03/2012 18:58:00, Simulator time = 13:01:18 (12:01Z)

174502 *** FSUIPC log file being closed

Average frame rate for running time of 89 secs = 34.9 fps

G3D fix: Passes 10678, Null pointers 0, Bad pointers 0, Separate instances 0

Memory managed: 46 Allocs, 46 Freed

********* FSUIPC Log file closed ***********

Share this post


Link to post
Share on other sites

Here is Axis controls

Okay. There is no Axis control input setting reverse. The AXIS_THROTTLEn_SET contorls have no reverse zone whatsoever -- -16384 is idle and everything above that to +16383 is forward thrust. Therefore it is something else doing it, possibly something in the NGX. I expect it would still occur if you didn't use FSUIPC as I think that's out of the equation.

Pete

Share this post


Link to post
Share on other sites

Hi Pete,

This info is from the other guy, he made that video!

Hi Robert,

Yes, it is only number 1.

And it doesn't matter, if I activate them directly in FSX, or if I calibrate and activate them via FSUIPC Registered.

And a second strange thing I very often have is, when I put the lever to early a little bit forward, so reverse will go out, then it happens, that the throttle itself will Not react (spool up), even the leaver itself is moving properly.

So you are right about that!!

I submitting a ticket via PMDG's Support about it !!

Thanks for all your time and help Pete!

Robert

Share this post


Link to post
Share on other sites

Hi Pete,

I solved my problem !!

Deleted the the FSUIPC4.INI file.

Setup everything again through FSUIPC4, and it's working great now.

Can not say why, something mest up the ini file but I am glad that it workes now!!

Thank you again!

Kind regards Robert

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
Sign in to follow this  

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use. Guidelines Privacy Policy We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.