Jump to content
The simFlight Network Forums
John Fee

Autopilot and Cycle View

Recommended Posts

I run FS9 in W7x64.

 

I have button 2 on CH Eclipse mapped to Views/cycle using FSUIPC v.3.999z9a. 

In cockpit view when I click this button (taking me into Virtual Cockpit or Spot views) the Collins AP Power switches off. 

 

 

410001941.jpg

 

 

410001940.jpg

 

As can be seen, the Collins, unusually for most FS9 autopilots, has separate Power ON/OFF switches and AP engage/disengage switches.

 

I am not sure how to separate commands for View/Cycle and Power ON/OFF with this particular autopilot using FSUIPC and would be grateful for advice. 

BTW, I cannot Power ON the Collins again until I return to Cockpit View.

 

Thanking you. 

 

John

Share this post


Link to post
Share on other sites

I run FS9 in W7x64.

 

I have button 2 on CH Eclipse mapped to Views/cycle using FSUIPC v.3.999z9a. 

In cockpit view when I click this button (taking me into Virtual Cockpit or Spot views) the Collins AP Power switches off. 

 

I wouldn't have thought they used the same FS control to operate AP power. That would be rather daft -- it would happen using the normal keyboard actions in FS too. Have you checked?

 

My betting is that you have more than one assignment to that button, maybe in FS as well as FSUIPC. Use the Event logging in FSUIPC's logging tab to see what controls are being sent when you press the button.

 

Pete

Share this post


Link to post
Share on other sites

I wouldn't have thought they used the same FS control to operate AP power. That would be rather daft -- it would happen using the normal keyboard actions in FS too. Have you checked?

 

My betting is that you have more than one assignment to that button, maybe in FS as well as FSUIPC. Use the Event logging in FSUIPC's logging tab to see what controls are being sent when you press the button.

 

Pete

 

Thank you, Pete.

 

The same thing happens with the FS keyboard command (S).  I've checked for duplicate assignments several times and could find none.

 

I've attached a log file and would be grateful if you could take a look at it. 

 

Regards,

 

John

FSUIPC_joy2.txt

Share this post


Link to post
Share on other sites

The same thing happens with the FS keyboard command (S).  I've checked for duplicate assignments several times and could find none.

 

Is the aircraft one of the defaults, or an add-on?

 

I've attached a log file and would be grateful if you could take a look at it. 
 
I'm afraid it does not contain enough information -- it looks like you did not enable the Event logging, only the Button/key logging?
 
BTW rather than attach logs as files it is easier for both of us if you simply paste heir contents into your message. Envelop them using the <> button above the edit area.

 

Pete

Share this post


Link to post
Share on other sites

Events included this time, my mistake.



********* FSUIPC, Version 3.999z9a by Pete Dowson *********
Running inside FS2004 (FS9.1 CONTROLS.DLL, FS9.1 WEATHER.DLL)
User Name="John Fee"
User Addr="gooneybird@yankeedodge.com"
FSUIPC Key is provided
WideFS Key is provided
[Continuation log requested by user]
Module base=61000000
WeatherReadInterval=4
LogOptions=00000001
  4729358 System time = 09/09/2014 16:25:25, FS2004 time = 15:07:43 (19:07Z)
  4729405 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
  4729405 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
  4729405 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
  4729405 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
  4729405 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
  4729405 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
  4729405 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
  4729405 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
  4729405 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
  4729405 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
  4729405 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
  4729405 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
  4729405 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
  4729405 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
  4729405 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
  4729405 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
  4729405 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
  4729405 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
  4729529 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
  4729576 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
  4729607 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
  4729701 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
  4729732 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
  4729779 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
  4729810 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
  4729888 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
  4729935 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
  4730013 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
  4730091 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
  4730138 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
  4730185 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
  4730216 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
  4730263 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
  4730341 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
  4730372 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
  4730419 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
  4730543 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
  4730575 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
  4730621 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
  4730668 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
  4730746 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
  4730777 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
  4730824 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
  4730855 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
  4730949 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
  4731027 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
  4731058 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
  4731136 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
  4731183 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
  4731230 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
  4731261 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
  4731339 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
  4731386 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
  4731433 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
  4731542 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
  4731589 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
  4731620 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
  4731667 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
  4731713 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
  4731791 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
  4731823 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
  4731869 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
  4731947 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
  4731994 Button changed: bRef=0, Joy=2, Btn=0, Pressed
  4731994 [Buttons] 11=P2,0,K83,8
  4731994 SendKeyToFS(00000053=[S], KEYDOWN) ctr=0 
  4731994 Sending WM_KEYDOWN, Key=83 (Scan code 31), Ctr=1
  4731994 KEYDOWN: VK=83, Waiting=0, Repeat=N, Shifts=0
  4731994 .. Key not programmed -- passed on to FS
  4731994 *** EVENT: Cntrl= 65567 (0x0001001f), Param= 0 (0x00000000) VIEW_MODE
  4732103 *** EVENT: Cntrl= 66104 (0x00010238), Param= 0 (0x00000000) AP_PANEL_ALTITUDE_OFF
  4732103 *** EVENT: Cntrl= 65816 (0x00010118), Param= 0 (0x00000000) AP_ALT_HOLD_OFF
  4732103 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 0 (0x00000000) AP_BC_HOLD_OFF
  4732103 *** EVENT: Cntrl= 65814 (0x00010116), Param= 0 (0x00000000) AP_APR_HOLD_OFF
  4732103 *** EVENT: Cntrl= 65815 (0x00010117), Param= 0 (0x00000000) AP_HDG_HOLD_OFF
  4732103 *** EVENT: Cntrl= 65819 (0x0001011b), Param= 0 (0x00000000) AP_NAV1_HOLD_OFF
  4732103 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 0 (0x00000000) AP_BC_HOLD_OFF
  4732103 *** EVENT: Cntrl= 65791 (0x000100ff), Param= 0 (0x00000000) AUTOPILOT_OFF
  4732103 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
  4732135 SendKeyToFS(00000053=[S], KEYUP) ctr=0 
  4732135 Sending WM_KEYUP, Key=83 (Scan code 31), Ctr=1
  4732135 Button changed: bRef=0, Joy=2, Btn=0, Released
  4732135 [Buttons] 11=P2,0,K83,8
  4732135 KEYUP: VK=83, Waiting=0
  4732181 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
  4732213 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
  4732306 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
  4732337 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
  4732384 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
  4732415 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
  4732540 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
  4732587 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
  4732618 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
  4732696 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
  4732743 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
  4732790 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
  4732821 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
  4732868 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
  4732946 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
  4733024 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
  4733071 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
  4733149 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
  4733180 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
  4733227 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
  4733273 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
  4733351 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
  4733383 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
  4733429 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
  4733554 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
  4733585 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
  4733632 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
  4733663 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
  4733741 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
  4733788 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
  4733835 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
  4733866 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
  4733944 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
  4733991 Button changed: bRef=0, Joy=2, Btn=0, Pressed
  4733991 [Buttons] 11=P2,0,K83,8
  4733991 SendKeyToFS(00000053=[S], KEYDOWN) ctr=0 
  4733991 Sending WM_KEYDOWN, Key=83 (Scan code 31), Ctr=1
  4733991 KEYDOWN: VK=83, Waiting=0, Repeat=N, Shifts=0
  4733991 .. Key not programmed -- passed on to FS
  4733991 *** EVENT: Cntrl= 65567 (0x0001001f), Param= 0 (0x00000000) VIEW_MODE
  4734038 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
  4734085 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
  4734116 SendKeyToFS(00000053=[S], KEYUP) ctr=0 
  4734116 Sending WM_KEYUP, Key=83 (Scan code 31), Ctr=1
  4734116 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
  4734116 KEYUP: VK=83, Waiting=0
  4734194 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
  4734241 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
  4734241 Button changed: bRef=0, Joy=2, Btn=0, Released
  4734241 [Buttons] 11=P2,0,K83,8
  4734272 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
  4734319 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
  4734397 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
  4734443 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
  4734521 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
  4734599 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
  4734646 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
  4734677 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
  4734724 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
  4734755 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
  4734755 Button changed: bRef=0, Joy=2, Btn=0, Pressed
  4734755 [Buttons] 11=P2,0,K83,8
  4734755 SendKeyToFS(00000053=[S], KEYDOWN) ctr=0 
  4734755 Sending WM_KEYDOWN, Key=83 (Scan code 31), Ctr=1
  4734755 KEYDOWN: VK=83, Waiting=0, Repeat=N, Shifts=0
  4734755 .. Key not programmed -- passed on to FS
  4734755 *** EVENT: Cntrl= 65567 (0x0001001f), Param= 0 (0x00000000) VIEW_MODE
  4734802 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
  4734896 SendKeyToFS(00000053=[S], KEYUP) ctr=0 
  4734896 Sending WM_KEYUP, Key=83 (Scan code 31), Ctr=1
  4734896 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
  4734896 KEYUP: VK=83, Waiting=0
  4734927 Button changed: bRef=0, Joy=2, Btn=0, Released
  4734927 [Buttons] 11=P2,0,K83,8
  4734927 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
  4735005 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
  4735083 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
  4735130 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
  4735177 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
  4735208 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
  4735255 Button changed: bRef=0, Joy=2, Btn=0, Pressed
  4735255 [Buttons] 11=P2,0,K83,8
  4735255 SendKeyToFS(00000053=[S], KEYDOWN) ctr=0 
  4735255 Sending WM_KEYDOWN, Key=83 (Scan code 31), Ctr=1
  4735255 KEYDOWN: VK=83, Waiting=0, Repeat=N, Shifts=0
  4735255 .. Key not programmed -- passed on to FS
  4735255 *** EVENT: Cntrl= 65567 (0x0001001f), Param= 0 (0x00000000) VIEW_MODE
  4735364 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
  4735395 SendKeyToFS(00000053=[S], KEYUP) ctr=0 
  4735395 Sending WM_KEYUP, Key=83 (Scan code 31), Ctr=1
  4735395 Button changed: bRef=0, Joy=2, Btn=0, Released
  4735395 [Buttons] 11=P2,0,K83,8
  4735395 KEYUP: VK=83, Waiting=0
  4735442 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
  4735520 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
  4735567 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
  4735645 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
  4735676 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
  4735723 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
 

Share this post


Link to post
Share on other sites
 

 

Events included this time, my mistake.

 
Well, I've no idea what aircraft you are using (you still didn't say), but look what it does with just the S key used:
 

4731994 SendKeyToFS(00000053=[S], KEYDOWN) ctr=0

4731994 Sending WM_KEYDOWN, Key=83 (Scan code 31), Ctr=1
4731994 KEYDOWN: VK=83, Waiting=0, Repeat=N, Shifts=0
4731994 .. Key not programmed -- passed on to FS
4731994 *** EVENT: Cntrl= 65567 (0x0001001f), Param= 0 (0x00000000) VIEW_MODE
4732103 *** EVENT: Cntrl= 66104 (0x00010238), Param= 0 (0x00000000) AP_PANEL_ALTITUDE_OFF
4732103 *** EVENT: Cntrl= 65816 (0x00010118), Param= 0 (0x00000000) AP_ALT_HOLD_OFF
4732103 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 0 (0x00000000) AP_BC_HOLD_OFF
4732103 *** EVENT: Cntrl= 65814 (0x00010116), Param= 0 (0x00000000) AP_APR_HOLD_OFF
4732103 *** EVENT: Cntrl= 65815 (0x00010117), Param= 0 (0x00000000) AP_HDG_HOLD_OFF
4732103 *** EVENT: Cntrl= 65819 (0x0001011b), Param= 0 (0x00000000) AP_NAV1_HOLD_OFF
4732103 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 0 (0x00000000) AP_BC_HOLD_OFF
4732103 *** EVENT: Cntrl= 65791 (0x000100ff), Param= 0 (0x00000000) AUTOPILOT_OFF
4732103 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
 

 

So, my question now: why are you assigning a button to the S key which, in FS, is assigned to the "view mode" control? Why not simply assign direct to the view mode control.?

 

Pete

Share this post


Link to post
Share on other sites

Thanks again.

 

It's the Aeroworx King Air. 

 

I'm not sure I understand your last two sentences.  I run FS9.  In FS9 'S' is 'Views (cycle)'.  I have used this assignment for button 2 for close on ten years without problems. I do not get an AP disconnect when I use button 2 on any other plane, be it default, Level D 767, or one of many other addons. 

 

When I open FSUIPC the number 24 is in the Btn# box. I think it ought not to be there. I cannot remove it except by un-checking the checked boxes. Then it reverts to 0. However, if I return to the opening panel to make some other adjustment, the 24 is always back.  I do not know if this is relevant.

 

Thanks for your help.

 

 

410007597.jpg

Share this post


Link to post
Share on other sites

I'm not sure I understand your last two sentences.  I run FS9.  In FS9 'S' is 'Views (cycle)'.  I have used this assignment for button 2 for close on ten years without problems. I do not get an AP disconnect when I use button 2 on any other plane, be it default, Level D 767, or one of many other addons. 

 

And for 10 years you've had this assignment for this aircraft too?  Is the Aerowinx King Air that old? What's changed if it is doing this now but not before?

 

 

When I open FSUIPC the number 24 is in the Btn# box. I think it ought not to be there.

 

That's the number of the button as seen by FSUIPC, the one it presumes you are assigning. Why should it not be there? Do you think your button has a different number? 

 

The one you used in the example log file you posted earlier was 0, as shown here:

 

[Buttons] 11=P2,0,K83,8

 

You most certainly have 'S' assigned to button 0.

 

I cannot remove it except by un-checking the checked boxes. Then it reverts to 0. However, if I return to the opening panel to make some other adjustment, the 24 is always back.  I do not know if this is relevant.

 

 

You have a button 24 which is constantly flickering on-off-on-off ... That is what is being detected. I would maybe guess that's the reason for these entries in the log, constantly telling the A/P to turn Back Course approach mode off:

 

But really all this is irrelevant, a distraction. All I suggested was assigning your button to the FS control you want to use, NOT to the letter 'S'. Use the right-hand side of that buttons screen you showed me (... for some unknown reason?).

 

Assigning to controls is always more efficient and more reliable. Only assign to keypresses for add-ons which really need keypresses, as your Aerowinx aircraft seems to, for that AP disconnect. Pretty much all FS actions have assignable controls. All the keypress would do (if not intercepted by an add-on) is go through the FS keyboard assignment tables to select the FS control you could have assigned to in the first place.

 

You should also check the documentation of the Aerowinx aircraft to see what other keystrokes it assigns, and see if they are changeable. They usually are, in most decent add-ons.

 

Pete

Share this post


Link to post
Share on other sites

And for 10 years you've had this assignment for this aircraft too?  Is the Aerowinx King Air that old? What's changed if it is doing this now but not before?

 

No, not the Aeroworx (which for some unknown reason you call Aerowinx), but all others since the sim came out.

 

 

 

That's the number of the button as seen by FSUIPC, the one it presumes you are assigning. Why should it not be there? Do you think your button has a different number?

 

I thought I was using button 2, button 24 is unassigned in FSUIPC.

 

 

 

The one you used in the example log file you posted earlier was 0, as shown here:

 

[Buttons] 11=P2,0,K83,8

 

You most certainly have 'S' assigned to button 0.

 

I see that very, very clearly.

 

 

 

You have a button 24 which is constantly flickering on-off-on-off ... That is what is being detected. I would maybe guess that's the reason for these entries in the log, constantly telling the A/P to turn Back Course approach mode off:

 

But really all this is irrelevant, a distraction. All I suggested was assigning your button to the FS control you want to use, NOT to the letter 'S'. Use the right-hand side of that buttons screen you showed me (... for some unknown reason?).

 

Assigning to controls is always more efficient and more reliable. Only assign to keypresses for add-ons which really need keypresses, as your Aerowinx aircraft seems to, for that AP disconnect. Pretty much all FS actions have assignable controls. All the keypress would do (if not intercepted by an add-on) is go through the FS keyboard assignment tables to select the FS control you could have assigned to in the first place.

 

You should also check the documentation of the Aerowinx aircraft to see what other keystrokes it assigns, and see if they are changeable. They usually are, in most decent add-ons.

 

Pete

 

Many thanks. 

Share this post


Link to post
Share on other sites

If you are still interested in getting this sorted out for me,  this is the button and event log for button 0 assigned to View Mode via FS control on the right side of the box. 

This made no difference. The autopilot still powers off.

 

There is no information on the keystrokes assigned to the Aeroworx/winx aircraft. 

********* FSUIPC, Version 3.999z9a by Pete Dowson *********
Running inside FS2004 (FS9.1 CONTROLS.DLL, FS9.1 WEATHER.DLL)
User Name="John Fee"
User Addr="gooneybird@yankeedodge.com"
FSUIPC Key is provided
WideFS Key is provided
[Continuation log requested by user]
Module base=61000000
WeatherReadInterval=4
LogOptions=00000001
   255108 System time = 09/09/2014 21:50:29, FS2004 time = 13:31:49 (17:31Z)
   255170 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   255170 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   255170 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   255170 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   256902 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   256949 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   257027 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   257058 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   257152 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   257183 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   257261 Button changed: bRef=0, Joy=0, Btn=0, Pressed
   257261 [Buttons] 20=P0,0,K83,8
   257261 SendKeyToFS(00000053=[S], KEYDOWN) ctr=0 
   257261 Sending WM_KEYDOWN, Key=83 (Scan code 31), Ctr=1
   257261 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   257261 KEYDOWN: VK=83, Waiting=0, Repeat=N, Shifts=0
   257261 .. Key not programmed -- passed on to FS
   257261 *** EVENT: Cntrl= 65567 (0x0001001f), Param= 0 (0x00000000) VIEW_MODE
   257386 SendKeyToFS(00000053=[S], KEYUP) ctr=0 
   257386 Sending WM_KEYUP, Key=83 (Scan code 31), Ctr=1
   257386 Button changed: bRef=0, Joy=0, Btn=0, Released
   257386 [Buttons] 20=P0,0,K83,8
   257386 *** EVENT: Cntrl= 66104 (0x00010238), Param= 0 (0x00000000) AP_PANEL_ALTITUDE_OFF
   257386 *** EVENT: Cntrl= 65816 (0x00010118), Param= 0 (0x00000000) AP_ALT_HOLD_OFF
   257386 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 0 (0x00000000) AP_BC_HOLD_OFF
   257386 *** EVENT: Cntrl= 65814 (0x00010116), Param= 0 (0x00000000) AP_APR_HOLD_OFF
   257386 *** EVENT: Cntrl= 65815 (0x00010117), Param= 0 (0x00000000) AP_HDG_HOLD_OFF
   257386 *** EVENT: Cntrl= 65819 (0x0001011b), Param= 0 (0x00000000) AP_NAV1_HOLD_OFF
   257386 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 0 (0x00000000) AP_BC_HOLD_OFF
   257386 *** EVENT: Cntrl= 65791 (0x000100ff), Param= 0 (0x00000000) AUTOPILOT_OFF
   257386 *** EVENT: Cntrl= 66288 (0x000102f0), Param= 0 (0x00000000) TOGGLE_FLIGHT_DIRECTOR
   257386 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   257386 KEYUP: VK=83, Waiting=0
   257464 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   257510 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   257542 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   257666 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   257713 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   257744 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   257822 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   257869 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   257916 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   257947 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   258025 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   258072 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   258150 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   258228 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   258228 Button changed: bRef=0, Joy=0, Btn=0, Pressed
   258228 [Buttons] 20=P0,0,K83,8
   258228 SendKeyToFS(00000053=[S], KEYDOWN) ctr=0 
   258228 Sending WM_KEYDOWN, Key=83 (Scan code 31), Ctr=1
   258228 KEYDOWN: VK=83, Waiting=0, Repeat=N, Shifts=0
   258228 .. Key not programmed -- passed on to FS
   258228 *** EVENT: Cntrl= 65567 (0x0001001f), Param= 0 (0x00000000) VIEW_MODE
   258290 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   258290 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   258322 Button changed: bRef=0, Joy=0, Btn=0, Released
   258322 [Buttons] 20=P0,0,K83,8
   258368 SendKeyToFS(00000053=[S], KEYUP) ctr=0 
   258368 Sending WM_KEYUP, Key=83 (Scan code 31), Ctr=1
   258368 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   258368 KEYUP: VK=83, Waiting=0
   258400 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   258446 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   258524 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   258571 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   258649 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   258680 Button changed: bRef=0, Joy=0, Btn=0, Pressed
   258680 [Buttons] 20=P0,0,K83,8
   258680 SendKeyToFS(00000053=[S], KEYDOWN) ctr=0 
   258680 Sending WM_KEYDOWN, Key=83 (Scan code 31), Ctr=1
   258680 KEYDOWN: VK=83, Waiting=0, Repeat=N, Shifts=0
   258680 .. Key not programmed -- passed on to FS
   258680 *** EVENT: Cntrl= 65567 (0x0001001f), Param= 0 (0x00000000) VIEW_MODE
   258727 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   258727 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   258821 SendKeyToFS(00000053=[S], KEYUP) ctr=0 
   258821 Sending WM_KEYUP, Key=83 (Scan code 31), Ctr=1
   258821 Button changed: bRef=0, Joy=0, Btn=0, Released
   258821 [Buttons] 20=P0,0,K83,8
   258821 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   258821 KEYUP: VK=83, Waiting=0
   258852 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   258899 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   258977 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   259008 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   259055 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   259180 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   259211 Button changed: bRef=0, Joy=0, Btn=0, Pressed
   259211 [Buttons] 20=P0,0,K83,8
   259211 SendKeyToFS(00000053=[S], KEYDOWN) ctr=0 
   259211 Sending WM_KEYDOWN, Key=83 (Scan code 31), Ctr=1
   259211 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   259211 KEYDOWN: VK=83, Waiting=0, Repeat=N, Shifts=0
   259211 .. Key not programmed -- passed on to FS
   259211 *** EVENT: Cntrl= 65567 (0x0001001f), Param= 0 (0x00000000) VIEW_MODE
   259336 SendKeyToFS(00000053=[S], KEYUP) ctr=0 
   259336 Sending WM_KEYUP, Key=83 (Scan code 31), Ctr=1
   259336 Button changed: bRef=0, Joy=0, Btn=0, Released
   259336 [Buttons] 20=P0,0,K83,8
   259336 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   259336 KEYUP: VK=83, Waiting=0
   259414 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   259460 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   259507 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   259538 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   259663 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
  

Thanks, again,

 

John

Share this post


Link to post
Share on other sites

If you are still interested in getting this sorted out for me,  this is the button and event log for button 0 assigned to View Mode via FS control on the right side of the box. 

This made no difference. The autopilot still powers off.

   257261 Button changed: bRef=0, Joy=0, Btn=0, Pressed
   257261 [Buttons] 20=P0,0,K83,8
   257261 SendKeyToFS(00000053=[S], KEYDOWN) ctr=0 
   257261 Sending WM_KEYDOWN, Key=83 (Scan code 31), Ctr=1

 

Two points:

 

1.  You are now using button 0 on Joystick 0. Previously you were using button 0 on joystick 2!

 

2, Clearly button 0, joystick 0 is NOT assigned to a control, but to 'S' still. Look at the part of the Log above which very clearly shows this. The assignment line in the INI is

      20=P0,0,K83,8

 

In the previous log you had:

      11=P2,0,K83,8

 

Seems you are changing joysticks, but not the way you assign!

 

Pete

Share this post


Link to post
Share on other sites

 

Seems you are changing joysticks, but not the way you assign!

 

Pete

 

I cannot explain this. I do not have two joysticks, just one yoke. Anyways, this log is for joystick 0 (the yoke)  and button 0.  The autopilot Power still turns off when I cycle from Cockpit View to other Views using button 0.

********* FSUIPC, Version 3.999z9a by Pete Dowson *********
Running inside FS2004 (FS9.1 CONTROLS.DLL, FS9.1 WEATHER.DLL)
User Name="John Fee"
User Addr="gooneybird@yankeedodge.com"
FSUIPC Key is provided
WideFS Key is provided
[Continuation log requested by user]
Module base=61000000
WeatherReadInterval=4
LogOptions=00000001
   171632 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   171679 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   171710 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   171804 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   171835 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   171882 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   171960 Button changed: bRef=0, Joy=0, Btn=0, Pressed
   171960 [Buttons] 20=P0,0,C65567,0
   171960 FS Control Sent: Ctrl=65567, Param=0
   171960 *** EVENT: Cntrl= 65567 (0x0001001f), Param= 0 (0x00000000) VIEW_MODE
   172069 *** EVENT: Cntrl= 66104 (0x00010238), Param= 0 (0x00000000) AP_PANEL_ALTITUDE_OFF
   172069 *** EVENT: Cntrl= 65816 (0x00010118), Param= 0 (0x00000000) AP_ALT_HOLD_OFF
   172069 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 0 (0x00000000) AP_BC_HOLD_OFF
   172069 *** EVENT: Cntrl= 65814 (0x00010116), Param= 0 (0x00000000) AP_APR_HOLD_OFF
   172069 *** EVENT: Cntrl= 65815 (0x00010117), Param= 0 (0x00000000) AP_HDG_HOLD_OFF
   172069 *** EVENT: Cntrl= 65819 (0x0001011b), Param= 0 (0x00000000) AP_NAV1_HOLD_OFF
   172069 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 0 (0x00000000) AP_BC_HOLD_OFF
   172069 *** EVENT: Cntrl= 65791 (0x000100ff), Param= 0 (0x00000000) AUTOPILOT_OFF
   172069 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   172147 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   172147 Button changed: bRef=0, Joy=0, Btn=0, Released
   172178 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   172225 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   172303 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   172350 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   172381 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   172506 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   172553 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   172584 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   172631 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   172662 Button changed: bRef=0, Joy=0, Btn=0, Pressed
   172662 [Buttons] 20=P0,0,C65567,0
   172662 FS Control Sent: Ctrl=65567, Param=0
   172662 *** EVENT: Cntrl= 65567 (0x0001001f), Param= 0 (0x00000000) VIEW_MODE
   172709 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   172709 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   172802 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   172833 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   172833 Button changed: bRef=0, Joy=0, Btn=0, Released
   172880 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   172989 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   173036 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   173083 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   173161 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   173161 Button changed: bRef=0, Joy=0, Btn=0, Pressed
   173161 [Buttons] 20=P0,0,C65567,0
   173161 FS Control Sent: Ctrl=65567, Param=0
   173161 *** EVENT: Cntrl= 65567 (0x0001001f), Param= 0 (0x00000000) VIEW_MODE
   173208 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   173239 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   173286 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   173317 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   173364 Button changed: bRef=0, Joy=0, Btn=0, Released
   173411 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   173489 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   173520 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   173613 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   173613 Button changed: bRef=0, Joy=0, Btn=0, Pressed
   173613 [Buttons] 20=P0,0,C65567,0
   173613 FS Control Sent: Ctrl=65567, Param=0
   173613 *** EVENT: Cntrl= 65567 (0x0001001f), Param= 0 (0x00000000) VIEW_MODE
   173723 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   173769 Button changed: bRef=0, Joy=0, Btn=0, Released
   173801 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   173847 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   173879 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   173972 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   174050 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   77389 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   247542 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   247542 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   247542 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   247542 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   247542 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   247542 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
      249680 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   249726 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   249804 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   249836 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   249882 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   249882 Button changed: bRef=0, Joy=0, Btn=0, Pressed
   249882 [Buttons] 20=P0,0,C65567,0
   249882 FS Control Sent: Ctrl=65567, Param=0
   249882 *** EVENT: Cntrl= 65567 (0x0001001f), Param= 0 (0x00000000) VIEW_MODE
   249992 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   249992 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   250070 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   250070 Button changed: bRef=0, Joy=0, Btn=0, Released
   250148 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   250194 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   250241 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   250272 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   250350 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   250397 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   250475 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   250553 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   250600 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   250631 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   250678 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   250678 Button changed: bRef=0, Joy=0, Btn=0, Pressed
   250678 [Buttons] 20=P0,0,C65567,0
   250678 FS Control Sent: Ctrl=65567, Param=0
   250678 *** EVENT: Cntrl= 65567 (0x0001001f), Param= 0 (0x00000000) VIEW_MODE
   250725 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   250772 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   250850 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   250850 Button changed: bRef=0, Joy=0, Btn=0, Released
   250881 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   251006 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   251052 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   251084 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   251130 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   251162 Button changed: bRef=0, Joy=0, Btn=0, Pressed
   251162 [Buttons] 20=P0,0,C65567,0
   251162 FS Control Sent: Ctrl=65567, Param=0
   251162 *** EVENT: Cntrl= 65567 (0x0001001f), Param= 0 (0x00000000) VIEW_MODE
   251208 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   251208 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   251302 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   251302 Button changed: bRef=0, Joy=0, Btn=0, Released
   251333 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   251380 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   251489 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   251536 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   251583 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   251614 Button changed: bRef=0, Joy=0, Btn=0, Pressed
   251614 [Buttons] 20=P0,0,C65567,0
   251614 FS Control Sent: Ctrl=65567, Param=0
   251614 *** EVENT: Cntrl= 65567 (0x0001001f), Param= 0 (0x00000000) VIEW_MODE
   251723 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   251770 Button changed: bRef=0, Joy=0, Btn=0, Released
   251770 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   251848 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   251879 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   252004 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   252051 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   252082 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   252129 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   252160 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   252254 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   252285 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
  *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   255186 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   255233 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   255264 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   255264 Button changed: bRef=0, Joy=0, Btn=0, Pressed
   255264 [Buttons] 20=P0,0,C65567,0
   255264 FS Control Sent: Ctrl=65567, Param=0
   255264 *** EVENT: Cntrl= 65567 (0x0001001f), Param= 0 (0x00000000) VIEW_MODE
   255374 *** EVENT: Cntrl= 66104 (0x00010238), Param= 0 (0x00000000) AP_PANEL_ALTITUDE_OFF
   255374 *** EVENT: Cntrl= 65816 (0x00010118), Param= 0 (0x00000000) AP_ALT_HOLD_OFF
   255374 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 0 (0x00000000) AP_BC_HOLD_OFF
   255374 *** EVENT: Cntrl= 65814 (0x00010116), Param= 0 (0x00000000) AP_APR_HOLD_OFF
   255374 *** EVENT: Cntrl= 65815 (0x00010117), Param= 0 (0x00000000) AP_HDG_HOLD_OFF
   255374 *** EVENT: Cntrl= 65819 (0x0001011b), Param= 0 (0x00000000) AP_NAV1_HOLD_OFF
   255374 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 0 (0x00000000) AP_BC_HOLD_OFF
   255374 *** EVENT: Cntrl= 65791 (0x000100ff), Param= 0 (0x00000000) AUTOPILOT_OFF
   255374 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   255452 Button changed: bRef=0, Joy=0, Btn=0, Released
   255498 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   255545 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   255576 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   255654 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   255701 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   255748 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   255779 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   255857 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   255904 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   255935 Button changed: bRef=0, Joy=0, Btn=0, Pressed
   255935 [Buttons] 20=P0,0,C65567,0
   255935 FS Control Sent: Ctrl=65567, Param=0
   255935 *** EVENT: Cntrl= 65567 (0x0001001f), Param= 0 (0x00000000) VIEW_MODE
   255982 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   256029 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   256076 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   256154 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   256154 Button changed: bRef=0, Joy=0, Btn=0, Released
   256185 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   256232 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   256263 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   256356 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   256388 Button changed: bRef=0, Joy=0, Btn=0, Pressed
   256388 [Buttons] 20=P0,0,C65567,0
   256388 FS Control Sent: Ctrl=65567, Param=0
   256388 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   256388 *** EVENT: Cntrl= 65567 (0x0001001f), Param= 0 (0x00000000) VIEW_MODE
   256481 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   256559 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   256559 Button changed: bRef=0, Joy=0, Btn=0, Released
   256606 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   256637 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   256684 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   256715 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   256793 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   256840 Button changed: bRef=0, Joy=0, Btn=0, Pressed
   256840 [Buttons] 20=P0,0,C65567,0
   256840 FS Control Sent: Ctrl=65567, Param=0
   256840 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   256840 *** EVENT: Cntrl= 65567 (0x0001001f), Param= 0 (0x00000000) VIEW_MODE
   256949 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   256965 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   256996 Button changed: bRef=0, Joy=0, Btn=0, Released
   257043 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   257074 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   257121 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   257199 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   257246 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   257277 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
   

Share this post


Link to post
Share on other sites

 

 Anyways, this log is for joystick 0 (the yoke)  and button 0.  The autopilot Power still turns off when I cycle from Cockpit View to other Views using button 0.

 

Okay. It is now assigned correctly, and it proves it isn't just the keypress. The action must be coded into the add-on aircraft. I'm afraid you will have to talk to their support, because there's no way to fix it as a user.

 

Pete

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×

Important Information

By using this site, you agree to our Terms of Use. Guidelines Privacy Policy We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.