Jump to content
The simFlight Network Forums

FSUIPC CTD


Recommended Posts

Well this started happening after I installed FTX AUS a few hours ago. It occurred twice, both in the air and around cruise. Here's Event Viewer  

Faulting application name: fsx.exe, version: 10.0.61472.0, time stamp: 0x475e17d3
Faulting module name: FSUIPC4.dll, version: 4.9.3.7, time stamp: 0x54354d4a
Exception code: 0xc0000005
Fault offset: 0x00084e8f
Faulting process id: 0xae0
Faulting application start time: 0x01d00b87174a03f8
Faulting application path: C:\FSX\fsx.exe
Faulting module path: C:\FSX\Modules\FSUIPC4.dll
Report Id: e090c482-7781-11e4-8438-bc5ff4e60c95
Faulting package full name: 
Faulting package-relative application ID: 
 
And here's the log 
********* FSUIPC4, Version 4.937 by Pete Dowson *********
Reading options from "C:\FSX\Modules\FSUIPC4.ini"
Running inside FSX on Windows 8
Module base=60950000
User Name=""
User Addr=""
FSUIPC4 not user registered
WIDEFS7 not user registered, or expired
       47 System time = 28/11/2014 22:50:45
       47 FLT path = "C:\Users\Brendan\Documents\Flight Simulator X Files\"
       94 Trying to connect to SimConnect Acc/SP2 Oct07 ...
      109 FS path = "C:\FSX\"
      390 LogOptions=00000000 00000001
      390 SIM1 Frictions access gained
      390 Wind smoothing fix is fully installed
      390 G3D.DLL fix attempt installed ok
      390 SimConnect_Open succeeded: waiting to check version okay
      390 Trying to use SimConnect Acc/SP2 Oct07
     9328 Running in "Microsoft Flight Simulator X", Version: 10.0.61472.0 (SimConnect: 10.0.61259.0)
     9328 Initialising SimConnect data requests now
     9328 FSUIPC Menu entry added
     9390 C:\FSX\FLIGHTS\OTHER\FLTSIM.FLT
     9390 C:\FSX\SimObjects\Airplanes\Aircreation_582SL\Aircreation_582SL.AIR
    57672 C:\FSX\SimObjects\Airplanes\PMDG 737-800NGX WL\B737-800WL.AIR
   168609 Weather Mode now = Theme
   169890 System time = 28/11/2014 22:53:34, Simulator time = 13:50:57 (03:50Z)
   170094 Starting everything now ...
   170687 Ready for ASN WX radar
   171719 Advanced Weather Interface Enabled
   321594 Sim stopped: average frame rate for last 166 secs = 13.0 fps
  1254906 Sim stopped: average frame rate for last 905 secs = 14.1 fps
 
I'll probably try to re-install FTX, but I just want to see what you guys have to say first.

 

Link to comment
Share on other sites

Well this started happening after I installed FTX AUS a few hours ago. It occurred twice, both in the air and around cruise. Here's Event Viewer  

Faulting application name: fsx.exe, version: 10.0.61472.0, time stamp: 0x475e17d3
Faulting module name: FSUIPC4.dll, version: 4.9.3.7, time stamp: 0x54354d4a
Exception code: 0xc0000005
Fault offset: 0x00084e8f

 

That info would be very useful if it occurred with my very latest update. Could you, please, download FSUIPC4937d and try again, so I have accurate data which will likely pinpoint the location for me and therefore the data in error?

 

Could you also list the other DLL's being loaded -- i.e. those enabled in your DLL.XML file?

 

Thanks,

 

Pete

Link to comment
Share on other sites

That info would be very useful if it occurred with my very latest update. Could you, please, download FSUIPC4937d and try again, so I have accurate data which will likely pinpoint the location for me and therefore the data in error?

 

Could you also list the other DLL's being loaded -- i.e. those enabled in your DLL.XML file?

 

Thanks,

 

Pete

Ah, sorry about that. Thought I had the most recent. I'll give it a try,

 

<SimBase.Document Type="Launch" version="1,0">
  <Descr>Launch</Descr>
  <Filename>dll.xml</Filename>
  <Disabled>False</Disabled>
  <Launch.ManualLoad>False</Launch.ManualLoad>
  <Launch.Addon>
    <Name>ObjectFlow.dll</Name>
    <Disabled>False</Disabled>
    <ManualLoad>False</ManualLoad>
    <Path>C:\FSX\ORBX\FTX_AU\FTXAA_ORBXLIBS\Scenery\ObjectFlow.dll</Path>
  </Launch.Addon>
  <Launch.Addon>
    <Name>Addon Manager</Name>
    <Disabled>False</Disabled>
    <ManualLoad>False</ManualLoad>
    <Path>bglmanx.dll</Path>
  </Launch.Addon>
  <Launch.Addon>
    <Name>Object Placement Tool</Name>
    <Disabled>True</Disabled>
    <ManualLoad>False</ManualLoad>
    <Path>..\Microsoft Flight Simulator X SDK\SDK\Mission Creation Kit\object_placement.dll</Path>
  </Launch.Addon>
  <Launch.Addon>
    <Name>Traffic Toolbox</Name>
    <Disabled>True</Disabled>
    <ManualLoad>False</ManualLoad>
    <Path>..\Microsoft Flight Simulator X SDK\SDK\Environment Kit\Traffic Toolbox SDK\traffictoolbox.dll</Path>
  </Launch.Addon>
  <Launch.Addon>
    <Name>Visual Effects Tool</Name>
    <Disabled>True</Disabled>
    <ManualLoad>False</ManualLoad>
    <Path>..\Microsoft Flight Simulator X SDK\SDK\Environment Kit\Special Effects SDK\visualfxtool.dll</Path>
  </Launch.Addon>
  <Launch.Addon>
    <Name>Flight Recorder</Name>
    <Disabled>False</Disabled>
    <ManualLoad>False</ManualLoad>
    <Path>Aerosoft\Flight Recorder\AS-FlightRecorder.dll</Path>
  </Launch.Addon>
  <Launch.Addon>
    <Name>RAASPRO</Name>
    <Disabled>False</Disabled>
    <ManualLoad>False</ManualLoad>
    <Path>.\RAASPRO\RAASPRO.dll</Path>
    <DllStartName>module_init</DllStartName>
    <DllStopName>module_deinit</DllStopName>
  </Launch.Addon>
  <Launch.Addon>
    <Name>PMDG Interface</Name>
    <Disabled>False</Disabled>
    <Path>PMDG\DLLs\PMDG_Interface.dll</Path>
    <DllStartName>module_init</DllStartName>
    <DllStopName>module_deinit</DllStopName>
  </Launch.Addon>
  <Launch.Addon>
    <Name>PMDG HUD interface</Name>
    <Disabled>False</Disabled>
    <Path>PMDG\DLLs\PMDG_HUD_interface.dll</Path>
    <DllStartName>module_init</DllStartName>
    <DllStopName>module_deinit</DllStopName>
  </Launch.Addon>
  <Launch.Addon>
    <Name>CMeteoXml</Name>
    <Disabled>False</Disabled>
    <Path>.\CMeteoXml.dll</Path>
  </Launch.Addon>
  <Launch.Addon>
    <Name>Captain Sim 767 Menu</Name>
    <Disabled>False</Disabled>
    <Path>Captain_Sim\Captain_Sim.b767.menu.dll</Path>
  </Launch.Addon>
  <Launch.Addon>
    <Name>FeelThere E170 Helper</Name>
    <Disabled>False</Disabled>
    <Path>FeelThere\E170\EJetH.dll</Path>
  </Launch.Addon>
  <Launch.Addon>
    <Name>b21 vario sound control</Name>
    <Disabled>False</Disabled>
    <ManualLoad>False</ManualLoad>
    <Path>Modules\b21_vario\b21_vario.dll</Path>
    <DllStartName>module_init</DllStartName>
    <DllStopName>module_deinit</DllStopName>
  </Launch.Addon>
  <Launch.Addon>
    <Name>PMDG Options</Name>
    <Disabled>False</Disabled>
    <Path>PMDG\DLLs\PMDGOptions.dll</Path>
  </Launch.Addon>
  <Launch.Addon>
    <Name>PMDG Events</Name>
    <Disabled>False</Disabled>
    <Path>PMDG\DLLs\PMDGEvents.dll</Path>
  </Launch.Addon>
  <Launch.Addon>
    <Name>PMDG Sounds</Name>
    <Disabled>False</Disabled>
    <Path>PMDG\DLLs\PMDGSounds.dll</Path>
  </Launch.Addon>
  <Launch.Addon>
    <Name>IvAp</Name>
    <Disabled>False</Disabled>
    <Path>C:\IvAp v2\ivap_fsx_bootstrap.dll</Path>
    <Commandline></Commandline>
  </Launch.Addon>
  <Launch.Addon>
        <Name>FSUIPC 4</Name>
        <Disabled>False</Disabled>
        <Path>Modules\FSUIPC4.dll</Path>
    </Launch.Addon>
  <Launch.Addon>
    <Name>FSCopilot</Name>
    <Disabled>False</Disabled>
    <Path>Modules\FSCopilot.dll</Path>
  </Launch.Addon>
  <Launch.Addon>
    <Name>as_connect</Name>
    <Disabled>False</Disabled>
    <Path>as_srv\as_btstrp.dll</Path>
  </Launch.Addon>
</SimBase.Document>
I think this is what your talking about correct?
Link to comment
Share on other sites

 

Ah, sorry about that. Thought I had the most recent. I'll give it a try,

 

Well you had the most recent supported release. It's just that odd things need updates between main releases, and the offsets in error reports then no longer tally. I look forward to seeing the error data with 4.937d.

 

 
I think this is what your talking about correct?
 
Yes, thank you. It is only to see what might be interacting with FSUIPC, assuming the error data you will be supplying makes little sense to me.
 
Of the DLLs being loaded, I assume the new one, pertaining to the ORBX scenery you just installed, is this one:
 
<Launch.Addon>
    <Name>ObjectFlow.dll</Name>
    <Disabled>False</Disabled>
    <ManualLoad>False</ManualLoad>
    <Path>C:\FSX\ORBX\FTX_AU\FTXAA_ORBXLIBS\Scenery\ObjectFlow.dll</Path>
  </Launch.Addon>
 
Maybe, just to verify that this might be the source of coflict, after getting a CTD with 4.937D, you could see if it goes away when changing this line:
 
    <Disabled>False</Disabled>
 
to be "True" instead of "False"?
 
Thanks,
Pete
 
 
Regards
Pete
Link to comment
Share on other sites

 

Well you had the most recent supported release. It's just that odd things need updates between main releases, and the offsets in error reports then no longer tally. I look forward to seeing the error data with 4.937d.

 

 
 
 
Yes, thank you. It is only to see what might be interacting with FSUIPC, assuming the error data you will be supplying makes little sense to me.
 
Of the DLLs being loaded, I assume the new one, pertaining to the ORBX scenery you just installed, is this one:
 
<Launch.Addon>
    <Name>ObjectFlow.dll</Name>
    <Disabled>False</Disabled>
    <ManualLoad>False</ManualLoad>
    <Path>C:\FSX\ORBX\FTX_AU\FTXAA_ORBXLIBS\Scenery\ObjectFlow.dll</Path>
  </Launch.Addon>
 
Maybe, just to verify that this might be the source of coflict, after getting a CTD with 4.937D, you could see if it goes away when changing this line:
 
    <Disabled>False</Disabled>
 
to be "True" instead of "False"?
 
Thanks,
Pete
 
 
Regards
Pete

 

Well everything went smooth. If anything happens with the new version I'll be sure to let you know. Thank you very much. 

Edited by BrendanS
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use. Guidelines Privacy Policy We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.