Jump to content
The simFlight Network Forums
Manny

VAS display in FSUIPC

Recommended Posts

Correction - my mistake - it's the amount of free VAS.

 

But you should only be getting an OOM if it shows something like 150K.

 

 

Exactly... So its showing I have a VAS of 2.5 G left yet it beeps that I am running low on VAS often  times with Flightbeam KSFO and PMDG 777 and  other sceneries added I get OOMs

Manny

Share this post


Link to post
Share on other sites

Exactly... So its showing I have a VAS of 2.5 G left yet it beeps that I am running low on VAS often  times with Flightbeam KSFO and PMDG 777 and  other sceneries added I get OOMs

Manny

 

The FSUIPC beeped warnings are based on a comparison of the value in offset 024C with 256000, which means 250 Mb left only, so the beeps at the point shown in your picture cannot be from FSUIPC -- or maybe the display on the title bar has frozen for some reason? Best to log to "normal log" so the progress of the value can be clearly seen, and even timestamped!

 

Pete

Share this post


Link to post
Share on other sites

Pete this is not a single instance..this is a pattern..so its not frozen

 

LEt me see how to do a normal log.. I haven't done this in a while I have forgotten how to turn on the log

Share this post


Link to post
Share on other sites

Pete this is not a single instance..this is a pattern..so its not frozen

 

Nevertheless the value in 024C IS the value being checked when FSUIPC issues its warnings. And the check IS less than 250Mb (256000).

 

LEt me see how to do a normal log.. I haven't done this in a while I have forgotten how to turn on the log

 

You don't "turn on the log". There is ALWAYS a log.  You have opted to monitor 024C on the title bar, near where you did that there is an option to monitor in the "normal log". You can't miss it if you've already managed to set it in the title bar!

 

You can also log messages like Memory in use: nnnnMb, Avail=nnnnMb by adding

 

Debug=Please

LogExtras=x1000

 

to the [General] section of the INI file before running the sim.

 

Also note that the check is only performed at most every 10 seconds, but it might be made much less frequent (up to 3600 seconds, or one hour) using the parameter

 

OOMcheckInterval=10

 

(in seconds).

 

Pete

Share this post


Link to post
Share on other sites
I tuned on the log within FSUIPC  normal log

 

FSUIPC4 Key is provided

WideFS7 Key is provided

   668886 System time = 04/10/2015 19:48:16, Simulator time = 08:00:07 (15:00Z)

   668886 FLT UNC path = "\\FSX2-PC\Users\FSX2\Documents\Prepar3D v3 Files\"

[Continuation log requested by user]

Running inside Prepar3D v3 on Windows 7

Module base=18240000


dule base=18240000

   669042 Monitor IPC:024C (S32) = 2635704

   679088 Monitor IPC:024C (S32) = 2632936

   709150 Monitor IPC:024C (S32) = 2633448

   759382 Monitor IPC:024C (S32) = 2626892

   819723 Monitor IPC:024C (S32) = 2625228

   829754 Monitor IPC:024C (S32) = 2626892

   849785 Monitor IPC:024C (S32) = 2609484

   859816 Monitor IPC:024C (S32) = 2608680

   869831 Monitor IPC:024C (S32) = 2601016

   879862 Monitor IPC:024C (S32) = 2607704

   889877 Monitor IPC:024C (S32) = 2611336

   899908 Monitor IPC:024C (S32) = 2610184

   909939 Monitor IPC:024C (S32) = 2607336

   919970 Monitor IPC:024C (S32) = 2606792

   930016 Monitor IPC:024C (S32) = 2583388

   950140 Monitor IPC:024C (S32) = 2588316

   960187 Monitor IPC:024C (S32) = 2586264

   980264 Monitor IPC:024C (S32) = 2584212

   990279 Monitor IPC:024C (S32) = 2581320

  1000310 Monitor IPC:024C (S32) = 2577764

 

Share this post


Link to post
Share on other sites

one flight I had to reboot.. the gauges and everything froze...but the flight was proceeding I was able to operate the aicraft with my yoke.. but I could not use my mouse or place my cursor on the browser.. It was dinging everytime I clicked on my mouse... like all the mouse clickes are in bugffer.. so I had to reboot

 

I am now loading the 777 at KSFO...with e logs turned on

 

FSUIPC4 Key is provided
WideFS7 Key is provided
       31 System time = 04/10/2015 20:14:39
       31 FLT UNC path = "\\FSX2-PC\Users\FSX2\Documents\Prepar3D v3 Files\"
       31 Trying P:\P3D v3\Modules\SimConnectP3D2.dll
       31 Found it: trying to connect
       47 FS UNC path = "P:\P3D v3\"
      374 Run: "F:\FSX\FSX.bat"
      374 LogOptions=00000000 00010011
      374 -------------------------------------------------------------------
      374 ------ Setting the hooks and direct calls into the simulator ------
      374 --- CONTROLS timer memory location obtained ok
      374 --- SIM1 Frictions access gained
      374 --- FS Controls Table located ok
      374 --- Installed Mouse Macro hooks ok.
      374 --- Wind smoothing fix is installed
      374 --- All links checked okay
      374 -------------------------------------------------------------------
      374 SimConnect_Open succeeded: waiting to check version okay
      374 Trying to use SimConnect Prepar3D
     5007 Ready Flags: Ready-To-Fly=N, In Menu=N, In Dlg=N
     5007 Monitor IPC:024C (S32) = 0
     5007 Running in "Lockheed Martin® Prepar3D® v3", Version: 3.0.3.0 (SimConnect: 3.0.0.0)
     5007 Initialising SimConnect data requests now
     5007 FSUIPC Menu entry added
     5039 Ready Flags: Ready-To-Fly=N, In Menu=Y, In Dlg=Y
     5039 \\FSX2-PC\Users\FSX2\AppData\Local\Lockheed Martin\Prepar3D v3\Prepar3D_Default.fxml
     5039 P:\P3D v3\SimObjects\Airplanes\IRIS Raptor Driver\Raptor.air
     5070 Memory in use: 821Mb, Avail=3275Mb
     5226 Deactivated for PID=4208, "notepad.exe"
     5397 Monitor IPC:024C (S32) = 3353296
    15116 Memory in use: 979Mb, Avail=3117Mb
    15288 Monitor IPC:024C (S32) = 3191952
    25163 Memory in use: 1036Mb, Avail=3059Mb
    25334 Monitor IPC:024C (S32) = 3132808
    35209 Memory in use: 1037Mb, Avail=3059Mb
    35256 Monitor IPC:024C (S32) = 3132044
    39655 Weather Mode now = Theme
    45256 Memory in use: 1052Mb, Avail=3044Mb
    48703 P:\P3D v3\SimObjects\Airplanes\PMDG 777-300ER\B777-300ER.air
    49109 Monitor IPC:024C (S32) = 3116792
    53789 Deactivated for PID=4356, "explorer.exe"
    53789 Lost focus to PID=4356, "explorer.exe"
    55411 Memory in use: 1796Mb, Avail=2300Mb
    55443 Monitor IPC:024C (S32) = 2355056
    65520 Memory in use: 1796Mb, Avail=2300Mb
    75598 Memory in use: 1810Mb, Avail=2286Mb
    75879 Monitor IPC:024C (S32) = 2340912
    85722 Memory in use: 1889Mb, Avail=2207Mb
    85910 Monitor IPC:024C (S32) = 2260208
    95862 Memory in use: 1907Mb, Avail=2189Mb
    96143 Monitor IPC:024C (S32) = 2241900
   105956 Memory in use: 1922Mb, Avail=2174Mb
   106190 Monitor IPC:024C (S32) = 2226220
   116096 Memory in use: 1921Mb, Avail=2175Mb
   116330 Monitor IPC:024C (S32) = 2226732
   126220 Memory in use: 1937Mb, Avail=2159Mb
   126329 Monitor IPC:024C (S32) = 2210540
   136391 Memory in use: 1952Mb, Avail=2143Mb
   136641 Monitor IPC:024C (S32) = 2194860
   146516 Memory in use: 1977Mb, Avail=2118Mb
   146578 Monitor IPC:024C (S32) = 2169256
   156625 Memory in use: 1978Mb, Avail=2118Mb
   156765 Monitor IPC:024C (S32) = 2169120
   166734 Memory in use: 1978Mb, Avail=2118Mb
   166749 Monitor IPC:024C (S32) = 2168400
   176842 Memory in use: 1979Mb, Avail=2117Mb
   176842 Monitor IPC:024C (S32) = 2167820
   185735 Lost focus to PID=4356, "explorer.exe"
   186905 Memory in use: 1979Mb, Avail=2116Mb
   187092 Monitor IPC:024C (S32) = 2167204
   196967 Memory in use: 1980Mb, Avail=2116Mb
   196982 Monitor IPC:024C (S32) = 2166488
   207122 Memory in use: 1980Mb, Avail=2115Mb
   207231 Monitor IPC:024C (S32) = 2166248
   217184 Memory in use: 1981Mb, Avail=2115Mb
   217309 Monitor IPC:024C (S32) = 2165632
   227231 Memory in use: 1981Mb, Avail=2115Mb
   227293 Monitor IPC:024C (S32) = 2165324
   237340 Memory in use: 1981Mb, Avail=2115Mb
   247417 Memory in use: 1981Mb, Avail=2115Mb
   247417 Monitor IPC:024C (S32) = 2165836
   257495 Memory in use: 1997Mb, Avail=2099Mb
   257682 Monitor IPC:024C (S32) = 2149644
   267557 Memory in use: 1997Mb, Avail=2099Mb
   277713 Memory in use: 1997Mb, Avail=2098Mb
   277791 Monitor IPC:024C (S32) = 2148860
   287790 Memory in use: 1998Mb, Avail=2098Mb
   287790 Monitor IPC:024C (S32) = 2148516
   297868 Memory in use: 1998Mb, Avail=2098Mb
   298071 Monitor IPC:024C (S32) = 2148412
   307977 Memory in use: 1998Mb, Avail=2098Mb
   308086 Monitor IPC:024C (S32) = 2148312
   318086 Memory in use: 2014Mb, Avail=2082Mb
   318211 Monitor IPC:024C (S32) = 2131708
   328179 Memory in use: 2015Mb, Avail=2081Mb
   328241 Monitor IPC:024C (S32) = 2131160
   338272 Memory in use: 2016Mb, Avail=2080Mb
   338444 Monitor IPC:024C (S32) = 2130204
   348334 Memory in use: 2017Mb, Avail=2079Mb
 
  539685 Memory in use: 2346Mb, Avail=1750Mb
   539857 Monitor IPC:024C (S32) = 1791620
   549778 Memory in use: 2361Mb, Avail=1735Mb
   549934 Monitor IPC:024C (S32) = 1776176
   559809 Memory in use: 2502Mb, Avail=1594Mb
   560028 Monitor IPC:024C (S32) = 1631948
   560605 Ready Flags: Ready-To-Fly=N, In Menu=N, In Dlg=N
   561057 System time = 04/10/2015 20:24:00, Simulator time = 08:00:00 (16:00Z)
   561089 Aircraft="PMDG 777-323ER American Airlines"
   569825 Memory in use: 2707Mb, Avail=1389Mb
   569840 Monitor IPC:024C (S32) = 1422208
   570870 Starting everything now ...
   570901 Using "C:\Program Files (x86)\GoFlight\GFDEV.DLL", version 2.2.4.3
   570901 GoFlight GFP8 detected: 1 device 
   570901 GoFlight GF166 detected: 1 device 
   570901 GoFlight GFRP48 detected: 1 device 
   570901 GoFlight GF46 detected: 1 device 
   570901 GoFlight GFMCPPRO detected: 1 device 
   570901 GoFlight GFEFIS detected: 1 device 
   570901 GoFlight GFWP6 detected: 1 device 
   570901 Ready Flags: Ready-To-Fly=Y, In Menu=N, In Dlg=N
   579887 Memory in use: 2733Mb, Avail=1363Mb
   579887 Monitor IPC:024C (S32) = 1395568
   587328 Ready Flags: Ready-To-Fly=Y, In Menu=Y, In Dlg=Y
   587328 Sim stopped: average frame rate for last 27 secs = 15.3 fps\
 
I got a ding here Memory warning and a popup (out of memory..i clicked on the right button that did not exist the sim)...its still loading
 
I got a black screen and freeze I had to reboot
 
Reminder of the log
 
   601384 Memory in use: 2754Mb, Avail=1341Mb
   601555 Monitor IPC:024C (S32) = 1373584
   611414 Memory in use: 2770Mb, Avail=1326Mb
   611586 Monitor IPC:024C (S32) = 1357680
   621430 Memory in use: 2771Mb, Avail=1325Mb
   621555 Monitor IPC:024C (S32) = 1357168
   631461 Memory in use: 2770Mb, Avail=1326Mb
   631523 Monitor IPC:024C (S32) = 1357680
   641523 Memory in use: 2770Mb, Avail=1326Mb
   651538 Memory in use: 2771Mb, Avail=1325Mb
   651600 Monitor IPC:024C (S32) = 1356656
   661787 Memory in use: 2805Mb, Avail=1291Mb
   661787 Monitor IPC:024C (S32) = 1321796
 

Share this post


Link to post
Share on other sites

I am starting another flight..this time in KSFO but using the default aircraft.. lets see

 

I am able to load this and fly around

 

1263640 Monitor IPC:024C (S32) = 1995720
  1273655 Memory in use: 2146Mb, Avail=1949Mb
  1273655 Monitor IPC:024C (S32) = 1996232
  1283670 Memory in use: 2135Mb, Avail=1961Mb
  1283670 Monitor IPC:024C (S32) = 2007880
  1293685 Memory in use: 2147Mb, Avail=1949Mb
  1293685 Monitor IPC:024C (S32) = 1995720
  1303701 Memory in use: 2148Mb, Avail=1948Mb
  1303701 Monitor IPC:024C (S32) = 1994868
  1312842 Deactivated for PID=5964, "notepad.exe"
  1312842 Lost focus to PID=5964, "notepad.exe"
  1313747 Memory in use: 2146Mb, Avail=1949Mb
  1313763 Monitor IPC:024C (S32) = 1996236
  1314511 Deactivated: culprit unknown
  1314511 Focus lost: culprit unknown
 
 
so the vAS reported in the screen is the same as in the log

Share this post


Link to post
Share on other sites

Pete..it may not be OOM.. its windows message

 

something like this. Its almost identical except it says close "Prepar3D" The pop up I keep mentioning is this windiow

 

 

21769677059_17be908171_o.jpg

 

This is PAgefile issue and now I remember I swapped my FSX SSD to a 1TB SSD for the new P3D V3 and that smaller SSD is running out of space..

 

Sorry about this pete

 

Let me try to fix that and come back and report back. 

Share this post


Link to post
Share on other sites

 

YES that was the issue

 

I created a new Page file and  now I am able to load my PMDG 777 in Flightbeam's KSFO!

 

smile.png  smile.png  smile.png  smile.png

 

https://youtu.be/Pze9ZtfBChM

 

 

 

Okay. Thanks from confirming. I could see for sure it was not FSUIPC OOM detection, not FSUIPC's "beep" but a Windows "ding"!

 

Pete

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use. Guidelines Privacy Policy We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.