Jump to content
The simFlight Network Forums
Sign in to follow this  
BoxxMann

4.947 Wont run on FSX:SE, P3d v2.5 and v3

Recommended Posts

I updated to 4.947 from 4.946 and now all three sims listed above will not run.  I rolled back to 4.946 and all seems to be good.  :/

 

It runs fine here on all those plus FSX.

 

I need more information, please. Specifically what actually happens -- "will not run" is rather less than informative. And a view of the FSUIPC4.LOG file (in the Modulers folder) from the unsuccessful attempts would be handy.

 

There's really no point in reporting things like this with no accompanying information, don't you see?

 

Pete

Share this post


Link to post
Share on other sites

It runs fine here on all those plus FSX.

 

I need more information, please. Specifically what actually happens -- "will not run" is rather less than informative. And a view of the FSUIPC4.LOG file (in the Modulers folder) from the unsuccessful attempts would be handy.

 

There's really no point in reporting things like this with no accompanying information, don't you see?

 

Pete

 

Yes, you're right.  I rolled back to 4.946 and it goes fine.  If there was an option here to remove the thread, I'd have opted for it.

 

Here's the symptom:  Start up each of the programs and none run, none of which go past the splash screens.  There's really nothing more to report.  While I'm sure all run fine on your end, but don't you see that perhaps others may not have the same results? 

 

Congratulations on having such a successful program.  I am sure I am not your only paying customer who enjoys it so much.  Since 4.946 runs without trouble and 4.947 does not produce more symptoms than what's stated, I'm happy to stay there and leave it at that.

Share this post


Link to post
Share on other sites

There's really nothing more to report.  While I'm sure all run fine on your end, but don't you see that perhaps others may not have the same results? 

 

Pete asked you for the log. I'm sure he understands that others may not have the same results, but unless you give him more information how is he ever going to find out what isn't working??

 

Cheers!

 

Luke

Share this post


Link to post
Share on other sites

I've got the same problem.

 

Here the full log:

********* FSUIPC4, Version 4.947 by Pete Dowson *********
Reading options from "C:\Program Files (x86)\Lockheed Martin\Prepar3D v3\Modules\FSUIPC4.ini"
Running inside Prepar3D v3 on Windows 8.0
Module base=52780000


FSUIPC4 Key is provided
WIDEFS7 not user registered, or expired
     1312 System time = 10/10/2015 16:33:24
     1312 FLT path = "C:\Users\Walti\Documents\Prepar3D v3 Files\"
     1312 Trying C:\Program Files (x86)\Lockheed Martin\Prepar3D v3\Modules\SimConnectP3D2.dll
     1328 Found it: trying to connect
     1359 FS path = "C:\Program Files (x86)\Lockheed Martin\Prepar3D v3\"
     1547 ---------------------- Joystick Device Scan -----------------------

 

If  I run fsuipc as an unregistered user then Prepar3d V3 starts without a problem. If  I run fsuipc as an registered user then Prepar3d V3 crashes.

 

Thanks

 

Walter

Share this post


Link to post
Share on other sites

Yes, you're right.  I rolled back to 4.946 and it goes fine.  If there was an option here to remove the thread, I'd have opted for it.

 

Why? How will I ever fix problems is everyone did that? I have to find and fix problems!

 

Here's the symptom:  Start up each of the programs and none run, none of which go past the splash screens.  There's really nothing more to report. 

 

 
Okay, that is more helpful. So it HANGS at the start-up screen, not CRASHES? i.e. Windows doesn't report a crash?
 
While I'm sure all run fine on your end, but don't you see that perhaps others may not have the same results? 

 

 

Oh dear. It is precisely BECAUSE it doesn't fail here thgat I need your help in finding out why it doesn't work there! There are so many variations on folks systems that I cannot possibly test here. I do my best, but then I'm reliant on nice friendly users giving me feedback, information, with which to continue to improve the program whilst trying to avoid or at least fix any problems!

 

 Since 4.946 runs without trouble and 4.947 does not produce more symptoms than what's stated, I'm happy to stay there and leave it at that.

 

 

That's really unhelpful! All I asked for was for more information so I could fix it. I'm sorry you don't have the time nor patience to do this. Hopefully the next person to get a similar problem won't take the same attitude, otherwise I'll not be able to fix it at all, and such users will never be able to update their P3D or FSX-SE either, because each such update requires a new update for FSUIPC.
 
:sad:
 
[LATER]
Ah, I see the next person has been more helpful, so I won't bother you any more.
 
Pete

Share this post


Link to post
Share on other sites

I've got the same problem.

 

Here the full log:

 

 

Ah, THANK YOU very much. That's much more helpful.

 

So it's hanging in the device scan, even before logging the first device. Hmm. 

 

Could you please download this test version,FSUIPC4947a_TEST with additional logging added. Before running P3D, add these lines to the [General] section of the FSUIPC4.INI file:

 

Debug=Please

LogExtras=x200000

 

Please just run it to get, hopefully, a more detailed log. You should then remove the LogExtras line before going back, temporarily (hopefully) to 4.946.

 

Another way to help please, if you don't mind, would be to runHidScanner and show me the log resulting from that, please. The new scanning code in FSUIPC uses the same methods as HidScanner. If this doesn't hang as well it will give me a log more info.

 

If  I run fsuipc as an unregistered user then Prepar3d V3 starts without a problem. If  I run fsuipc as an registered user then Prepar3d V3 crashes.

 

 

 

You really mean crashes rather than hangs?  If so, can you locate the windows crash data from me, please? In Windows' event viewer? That'll be most useful too.

 

Thanks 

Pete

Share this post


Link to post
Share on other sites

Helle Pete,

 

thank you very much. 4947a works!

 

Here the log

********* FSUIPC4, Version 4.947a by Pete Dowson *********
Reading options from "C:\Program Files (x86)\Lockheed Martin\Prepar3D v3\Modules\FSUIPC4.ini"
Running inside Prepar3D v3 on Windows 8.0
Module base=15540000

 

FSUIPC4 Key is provided
WIDEFS7 not user registered, or expired
      422 System time = 11/10/2015 11:26:47
      422 FLT path = "C:\Users\Walti\Documents\Prepar3D v3 Files\"
      422 Trying C:\Program Files (x86)\Lockheed Martin\Prepar3D v3\Modules\SimConnectP3D2.dll
      438 Found it: trying to connect
      485 FS path = "C:\Program Files (x86)\Lockheed Martin\Prepar3D v3\"
      657 #### Initialising Dlrectinput Axis Scanning ...
      672    Found correct joystick Id 0
      672    ... and a "GUID" value
      688 ... okay, Acquired device as #0!
      782 ---------------------- Joystick Device Scan -----------------------
      782 Checking: \\?\hid#vid_044f&pid_b10a#6&1255c004&1&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}
      782 Product= T.16000M
      782    Manufacturer= Thrustmaster
      782    Vendor=044F, Product=B10A (Version 5.0)
      782    Serial Number= Thrustmaster
      782 Checking: \\?\hid#vid_056a&pid_0027&col02#7&792ed82&0&0001#{4d1e55b2-f16f-11cf-88cb-001111000030}
      782 Checking: \\?\hid#vid_046d&pid_c31c&mi_01&col01#8&3031901a&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}
      782 Checking: \\?\hid#vid_056a&pid_0027&col03#7&792ed82&0&0002#{4d1e55b2-f16f-11cf-88cb-001111000030}
      782 Checking: \\?\hid#vid_046d&pid_c31c&mi_01&col02#8&3031901a&0&0001#{4d1e55b2-f16f-11cf-88cb-001111000030}
      782 Checking: \\?\hid#vid_046d&pid_c31c&mi_01&col03#8&3031901a&0&0002#{4d1e55b2-f16f-11cf-88cb-001111000030}
      782 Checking: \\?\hid#vid_056d&pid_0002#8&260220fe&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}
      782 Checking: \\?\hid#vid_056a&pid_0027&col04#7&792ed82&0&0003#{4d1e55b2-f16f-11cf-88cb-001111000030}
      782 Checking: \\?\hid#vid_056a&pid_0027&col05#7&792ed82&0&0004#{4d1e55b2-f16f-11cf-88cb-001111000030}
      782 Checking: \\?\hid#vid_046d&pid_c069#6&1488b66d&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}
      782 Checking: \\?\hid#vid_046d&pid_c31c&mi_00#8&186e03d5&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}
      782 Checking: \\?\hid#vid_056a&pid_0027&col01#7&792ed82&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}
      782 -------------------------------------------------------------------
      782 #### Completed Dlrectinput Axis Scanning
      860 LogOptions=00000000 02000011
      891 -------------------------------------------------------------------
      891 ------ Setting the hooks and direct calls into the simulator ------
      891 --- CONTROLS timer memory location obtained ok
      891 --- SIM1 Frictions access gained
      907 --- FS Controls Table located ok
      907 --- Installed Mouse Macro hooks ok.
      907 --- Wind smoothing fix is installed
      907 --- All links checked okay
      907 -------------------------------------------------------------------
      907 SimConnect_Open succeeded: waiting to check version okay
      907 Trying to use SimConnect Prepar3D
     2469 Running in "Lockheed Martin® Prepar3D® v3", Version: 3.0.3.0 (SimConnect: 3.0.0.0)
     2469 Initialising SimConnect data requests now
     2469 FSUIPC Menu entry added
     2485 Ready Flags: Ready-To-Fly=N, In Menu=Y, In Dlg=Y
     2485 C:\Users\Walti\Documents\Prepar3D v3 Files\ZRH Beech King.fxml
     2485 C:\Program Files (x86)\Lockheed Martin\Prepar3D v3\SimObjects\Airplanes\Beech_King_Air_350\Beech_King_Air_350.air
     2594 Memory in use: 742Mb, Avail=3354Mb
    14766 Ready Flags: Ready-To-Fly=N, In Menu=N, In Dlg=N
    15703 System time = 11/10/2015 11:27:02, Simulator time = 08:00:01 (07:00Z)
    15719 Aircraft="Beech King Air 350 Paint1"
    16719 Starting everything now ...
    16735 Ready Flags: Ready-To-Fly=Y, In Menu=N, In Dlg=N
    17297 Ready Flags: Ready-To-Fly=Y, In Menu=Y, In Dlg=Y
    24875 Ready Flags: Ready-To-Fly=Y, In Menu=N, In Dlg=N
    27032 Advanced Weather Interface Enabled
    29344 Ready Flags: Ready-To-Fly=Y, In Menu=Y, In Dlg=Y
    34282 Deactivated for PID=9748, "notepad++.exe"
    34282 Lost focus to PID=9748, "notepad++.exe"
    34797 === NOTE: not calling SimConnect_Close ...
    35797 System time = 11/10/2015 11:27:22, Simulator time = 08:00:07 (07:00Z)
    35797 *** FSUIPC log file being closed
Minimum frame rate was 78.2 fps, Maximum was 86.4 fps
Minimum available memory recorded was 32768Mb
Average frame rate for running time of 7 secs = 83.7 fps
Memory managed: 5 Allocs, 5 Freed
********* FSUIPC Log file closed ***********

 

 

You really mean crashes rather than hangs?  If so, can you locate the windows crash data from me, please? In Windows' event viewer? That'll be most useful too.

No, windows is not crashing. If  I run fsuipc as an registered user then Prepar3d V3 is hidden and I can't "play" with it :-)
 

Share this post


Link to post
Share on other sites

thank you very much. 4947a works!

 

Ah, but does it still work if you remove those extra logging lines? If not then I have a difficult timing bug to locate. If it does still work then I think I know what it must have been ...

 

Thanks for the log. It is very useful to help me improve some things in any case. ;-)

 

I'll have another Test version later today. Would you mind trying that for me too, before I "unleash" any more trouble? 

 

Pete

Share this post


Link to post
Share on other sites

I removed those extra logging lines and it still works :razz:

 

Good.

 

 

In my case, the problem ist solved. The next test version I will be able to test not before tomorrow evening, sorry!

 

Okay. I'll post another link anyway later today and be patient! ;-)

 

Pete

Share this post


Link to post
Share on other sites

Sorry Pete,

 

it's crazy, but at the moment fsuipc 4.947a is not working anymore even with extra logging files!

 

Good luck

 

Walter

 

Here are the logs

********* HidScanner, Version 2.00 by Pete Dowson *********

  Device at "\\?\hid#vid_044f&pid_b10a#6&1255c004&1&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}"
  Vendor=044F, Product=B10A (Version 5.0)
  Manufacturer= Thrustmaster
  Product= T.16000M
  Serial Number= T.16000M
  Usage Page: 1
  Input Report Byte Length: 10
  Output Report Byte Length: 0
  Feature Report Byte Length: 5
  Number of Link Collection Nodes: 1
  Number of Input Button Caps: 1
  Number of InputValue Caps: 5
  Number of InputData Indices: 21
  Number of Output Button Caps: 0
  Number of Output Value Caps: 0
  Number of Output Data Indices: 0
  Number of Feature Button Caps: 0
  Number of Feature Value Caps: 1
  Number of Feature Data Indices: 1
  Buttons range 1 -> 16 at indices 0 -> 15
  Value POV at index 16, range 0 -> 7, using 4 bits
  Value X at index 17, range 0 -> 16383, using 14 bits
  Value Y at index 18, range 0 -> 16383, using 14 bits
  Value Sldr at index 19, range 0 -> 255, using 8 bits
  Value R/RZ at index 20, range 0 -> 255, using 8 bits
  **************************************************************************

  Device at "\\?\hid#vid_056a&pid_0027&col02#7&792ed82&0&0001#{4d1e55b2-f16f-11cf-88cb-001111000030}"
  Vendor=056A, Product=0027 (Version 1.7)
  Manufacturer= Wacom Co.,Ltd.
  Product= Intuos5 touch M
  Serial Number=
  Usage Page: FF00
  Input Report Byte Length: 11
  Output Report Byte Length: 86
  Feature Report Byte Length: 1024
  Number of Link Collection Nodes: 3
  Number of Input Button Caps: 0
  Number of InputValue Caps: 5
  Number of InputData Indices: 5
  Number of Output Button Caps: 0
  Number of Output Value Caps: 1
  Number of Output Data Indices: 1
  Number of Feature Button Caps: 1
  Number of Feature Value Caps: 1
  Number of Feature Data Indices: 2
  Value X at index 0, range 0 -> 44704, using 16 bits
  Value Y at index 1, range 0 -> 27940, using 16 bits
  Value X at index 2, range 0 -> 2047, using 16 bits
  Value 0x01 at index 3, range 0 -> 255, using 8 bits
  Value 0x01 at index 4, range 0 -> 255, using 8 bits
  **************************************************************************

  Device at "\\?\hid#vid_046d&pid_c31c&mi_01&col01#8&3031901a&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}"
  Vendor=046D, Product=C31C (Version 100.0)
  Manufacturer= Logitech
  Product= USB Keyboard
  Serial Number= USB Keyboard
  Usage Page: C
  Input Report Byte Length: 2
  Output Report Byte Length: 0
  Feature Report Byte Length: 0
  Number of Link Collection Nodes: 1
  Number of Input Button Caps: 1
  Number of InputValue Caps: 1
  Number of InputData Indices: 2
  Number of Output Button Caps: 0
  Number of Output Value Caps: 0
  Number of Output Data Indices: 0
  Number of Feature Button Caps: 0
  Number of Feature Value Caps: 0
  Number of Feature Data Indices: 0
  Value 0xE0 at index 0, range -24 -> 24, using 7 bits
  **************************************************************************

  Device at "\\?\hid#vid_056a&pid_0027&col03#7&792ed82&0&0002#{4d1e55b2-f16f-11cf-88cb-001111000030}"
  Vendor=056A, Product=0027 (Version 1.7)
  Manufacturer= Wacom Co.,Ltd.
  Product= Intuos5 touch M
  Serial Number=
  Usage Page: FF00
  Input Report Byte Length: 64
  Output Report Byte Length: 86
  Feature Report Byte Length: 1024
  Number of Link Collection Nodes: 3
  Number of Input Button Caps: 0
  Number of InputValue Caps: 4
  Number of InputData Indices: 4
  Number of Output Button Caps: 0
  Number of Output Value Caps: 1
  Number of Output Data Indices: 1
  Number of Feature Button Caps: 1
  Number of Feature Value Caps: 1
  Number of Feature Data Indices: 2
  Value X at index 0, range 0 -> 4096, using 16 bits
  Value Y at index 1, range 0 -> 4096, using 16 bits
  Value 0x01 at index 2, range 0 -> 255, using 8 bits
  Value 0x01 at index 3, range 0 -> 255, using 8 bits
  **************************************************************************

  Device at "\\?\hid#vid_046d&pid_c31c&mi_01&col02#8&3031901a&0&0001#{4d1e55b2-f16f-11cf-88cb-001111000030}"
  Vendor=046D, Product=C31C (Version 100.0)
  Manufacturer= Logitech
  Product= USB Keyboard
  Serial Number= USB Keyboard
  Usage Page: 1
  Input Report Byte Length: 2
  Output Report Byte Length: 0
  Feature Report Byte Length: 0
  Number of Link Collection Nodes: 1
  Number of Input Button Caps: 3
  Number of InputValue Caps: 0
  Number of InputData Indices: 3
  Number of Output Button Caps: 0
  Number of Output Value Caps: 0
  Number of Output Data Indices: 0
  Number of Feature Button Caps: 0
  Number of Feature Value Caps: 0
  Number of Feature Data Indices: 0
  **************************************************************************

  Device at "\\?\hid#vid_046d&pid_c31c&mi_01&col03#8&3031901a&0&0002#{4d1e55b2-f16f-11cf-88cb-001111000030}"
  Vendor=046D, Product=C31C (Version 100.0)
  Manufacturer= Logitech
  Product= USB Keyboard
  Serial Number= USB Keyboard
  Usage Page: C
  Input Report Byte Length: 4
  Output Report Byte Length: 0
  Feature Report Byte Length: 0
  Number of Link Collection Nodes: 1
  Number of Input Button Caps: 21
  Number of InputValue Caps: 0
  Number of InputData Indices: 21
  Number of Output Button Caps: 0
  Number of Output Value Caps: 0
  Number of Output Data Indices: 0
  Number of Feature Button Caps: 0
  Number of Feature Value Caps: 0
  Number of Feature Data Indices: 0
  **************************************************************************

  Device at "\\?\hid#vid_056d&pid_0002#8&260220fe&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}"
  Vendor=056D, Product=0002 (Version 128.0)
  Manufacturer= EIZO
  Product= EIZO USB HID Monitor
  Serial Number= EIZO USB HID Monitor
  Usage Page: 80
  Input Report Byte Length: 519
  Output Report Byte Length: 0
  Feature Report Byte Length: 519
  Number of Link Collection Nodes: 1
  Number of Input Button Caps: 0
  Number of InputValue Caps: 2
  Number of InputData Indices: 2
  Number of Output Button Caps: 0
  Number of Output Value Caps: 0
  Number of Output Data Indices: 0
  Number of Feature Button Caps: 0
  Number of Feature Value Caps: 9
  Number of Feature Data Indices: 9
  Value 0x03 at index 0, range 0 -> 255, using 8 bits
  Value 0x05 at index 1, range 0 -> 255, using 8 bits
  **************************************************************************

  Device at "\\?\hid#vid_056a&pid_0027&col04#7&792ed82&0&0003#{4d1e55b2-f16f-11cf-88cb-001111000030}"
  Vendor=056A, Product=0027 (Version 1.7)
  Manufacturer= Wacom Co.,Ltd.
  Product= Intuos5 touch M
  Serial Number=
  Usage Page: D
  Input Report Byte Length: 38
  Output Report Byte Length: 0
  Feature Report Byte Length: 2
  Number of Link Collection Nodes: 2
  Number of Input Button Caps: 6
  Number of InputValue Caps: 13
  Number of InputData Indices: 19
  Number of Output Button Caps: 0
  Number of Output Value Caps: 0
  Number of Output Data Indices: 0
  Number of Feature Button Caps: 0
  Number of Feature Value Caps: 1
  Number of Feature Data Indices: 1
  Value X at index 6, range 0 -> 32767, using 16 bits
  Value Y at index 7, range 0 -> 32767, using 16 bits
  Value Z at index 8, range 0 -> 1024, using 16 bits
  Value X at index 9, range 0 -> 2047, using 16 bits
  Value 0x5B at index 10, range 0 -> 2047, using 32 bits
  Value 0x5B at index 11, range 0 -> 2047, using 64 bits
  Value 0x77 at index 12, range 0 -> 2047, using 32 bits
  Value Y at index 13, range 0 -> 1024, using 16 bits
  Value 0x3D at index 14, range -9000 -> 9000, using 16 bits
  Value 0x3E at index 15, range -9000 -> 9000, using 16 bits
  Value 0x40 at index 16, range -9000 -> 9000, using 16 bits
  Value 0x3F at index 17, range 0 -> 36000, using 16 bits
  Value 0x41 at index 18, range 0 -> 36000, using 16 bits
  **************************************************************************

  Device at "\\?\hid#vid_056a&pid_0027&col05#7&792ed82&0&0004#{4d1e55b2-f16f-11cf-88cb-001111000030}"
  Vendor=056A, Product=0027 (Version 1.7)
  Manufacturer= Wacom Co.,Ltd.
  Product= Intuos5 touch M
  Serial Number=
  Usage Page: D
  Input Report Byte Length: 38
  Output Report Byte Length: 0
  Feature Report Byte Length: 0
  Number of Link Collection Nodes: 2
  Number of Input Button Caps: 6
  Number of InputValue Caps: 13
  Number of InputData Indices: 19
  Number of Output Button Caps: 0
  Number of Output Value Caps: 0
  Number of Output Data Indices: 0
  Number of Feature Button Caps: 0
  Number of Feature Value Caps: 0
  Number of Feature Data Indices: 0
  Value X at index 6, range 0 -> 32767, using 16 bits
  Value Y at index 7, range 0 -> 32767, using 16 bits
  Value Z at index 8, range 0 -> 1024, using 16 bits
  Value X at index 9, range 0 -> 2047, using 16 bits
  Value 0x5B at index 10, range 0 -> 2047, using 32 bits
  Value 0x5B at index 11, range 0 -> 2047, using 64 bits
  Value 0x77 at index 12, range 0 -> 2047, using 32 bits
  Value Y at index 13, range 0 -> 1024, using 16 bits
  Value 0x3D at index 14, range -9000 -> 9000, using 16 bits
  Value 0x3E at index 15, range -9000 -> 9000, using 16 bits
  Value 0x40 at index 16, range -9000 -> 9000, using 16 bits
  Value 0x3F at index 17, range 0 -> 36000, using 16 bits
  Value 0x41 at index 18, range 0 -> 36000, using 16 bits
  **************************************************************************
      172: Error 6 [00000006] returned on HidD_GetAttributes:  (\\?\hid#vid_1493&pid_001b#6&34f5874&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030})

  Device at "\\?\hid#vid_1493&pid_001b#6&34f5874&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}"
  Vendor=007F, Product=0000 (Version 231.22)
  Manufacturer=
  Product=
  Serial Number=
  Usage Page: 0
  Input Report Byte Length: 20
  Output Report Byte Length: 0
  Feature Report Byte Length: 64512
  Number of Link Collection Nodes: 39968
  Number of Input Button Caps: 64
  Number of InputValue Caps: 20
  Number of InputData Indices: 0
  Number of Output Button Caps: 39672
  Number of Output Value Caps: 64
  Number of Output Data Indices: 0
  Number of Feature Button Caps: 0
  Number of Feature Value Caps: 256
  Number of Feature Data Indices: 0
  Value 0x00 at index 0, range 0 -> 0, using 0 bits
  Value 0x00 at index 0, range 0 -> 0, using 0 bits
  Value 0x00 at index 0, range 0 -> 0, using 0 bits
  Value 0x00 at index 0, range 0 -> 0, using 0 bits
  Value 0x00 at index 0, range 0 -> 0, using 0 bits
  Value 0x00 at index 0, range 0 -> 0, using 0 bits
  Value 0x00 at index 0, range 0 -> 0, using 0 bits
  Value 0x00 at index 0, range 0 -> 0, using 0 bits
  Value 0x00 at index 0, range 0 -> 0, using 0 bits
  Value 0x00 at index 0, range 0 -> 0, using 0 bits
  Value 0x00 at index 0, range 0 -> 0, using 0 bits
  Value 0x00 at index 0, range 0 -> 0, using 0 bits
  Value 0x00 at index 0, range 0 -> 0, using 0 bits
  Value 0x00 at index 0, range 0 -> 0, using 0 bits
  Value 0x00 at index 0, range 0 -> 0, using 0 bits
  Value 0x00 at index 0, range 0 -> 0, using 0 bits
  Value 0x00 at index 0, range 0 -> 0, using 0 bits
  Value 0x00 at index 0, range 0 -> 0, using 0 bits
  Value 0x00 at index 0, range 0 -> 0, using 0 bits
  Value 0x00 at index 0, range 0 -> 0, using 0 bits
  **************************************************************************

  Device at "\\?\hid#vid_046d&pid_c069#6&1488b66d&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}"
  Vendor=046D, Product=C069 (Version 86.1)
  Manufacturer= Logitech
  Product= USB Laser Mouse
  Serial Number= USB Laser Mouse
  Device is a mouse
  Usage Page: 1
  Input Report Byte Length: 7
  Output Report Byte Length: 0
  Feature Report Byte Length: 0
  Number of Link Collection Nodes: 2
  Number of Input Button Caps: 1
  Number of InputValue Caps: 4
  Number of InputData Indices: 12
  Number of Output Button Caps: 0
  Number of Output Value Caps: 0
  Number of Output Data Indices: 0
  Number of Feature Button Caps: 0
  Number of Feature Value Caps: 0
  Number of Feature Data Indices: 0
  Buttons range 1 -> 8 at indices 0 -> 7
  Value Y at index 8, range -2047 -> 2047, using 12 bits
  Value X at index 9, range -2047 -> 2047, using 12 bits
  Value Wh at index 10, range -127 -> 127, using 8 bits
  Value Wh at index 11, range -127 -> 127, using 8 bits
  **************************************************************************

  Device at "\\?\hid#vid_046d&pid_c31c&mi_00#8&186e03d5&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}"
  Vendor=046D, Product=C31C (Version 100.0)
  Manufacturer= Logitech
  Product= USB Keyboard
  Serial Number= USB Keyboard
  Device is a keyboard
  Usage Page: 1
  Input Report Byte Length: 9
  Output Report Byte Length: 2
  Feature Report Byte Length: 0
  Number of Link Collection Nodes: 1
  Number of Input Button Caps: 2
  Number of InputValue Caps: 0
  Number of InputData Indices: 264
  Number of Output Button Caps: 1
  Number of Output Value Caps: 0
  Number of Output Data Indices: 5
  Number of Feature Button Caps: 0
  Number of Feature Value Caps: 0
  Number of Feature Data Indices: 0
  **************************************************************************

  Device at "\\?\hid#vid_056a&pid_0027&col01#7&792ed82&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}"
  Vendor=056A, Product=0027 (Version 1.7)
  Manufacturer= Wacom Co.,Ltd.
  Product= Intuos5 touch M
  Serial Number=
  Usage Page: 1
  Input Report Byte Length: 7
  Output Report Byte Length: 0
  Feature Report Byte Length: 0
  Number of Link Collection Nodes: 2
  Number of Input Button Caps: 1
  Number of InputValue Caps: 3
  Number of InputData Indices: 8
  Number of Output Button Caps: 0
  Number of Output Value Caps: 0
  Number of Output Data Indices: 0
  Number of Feature Button Caps: 0
  Number of Feature Value Caps: 0
  Number of Feature Data Indices: 0
  Buttons range 1 -> 5 at indices 0 -> 4
  Value Y at index 5, range 0 -> 32767, using 16 bits
  Value X at index 6, range 0 -> 32767, using 16 bits
  Value Wh at index 7, range -127 -> 127, using 8 bits
  **************************************************************************

 

 

 

********* FSUIPC4, Version 4.947a by Pete Dowson *********
Reading options from "C:\Program Files (x86)\Lockheed Martin\Prepar3D v3\Modules\FSUIPC4.ini"
Running inside Prepar3D v3 on Windows 8.0
Module base=50530000


FSUIPC4 Key is provided
WIDEFS7 not user registered, or expired
       16 System time = 11/10/2015 13:20:16
       16 FLT path = "C:\Users\Walti\Documents\Prepar3D v3 Files\"
       16 Trying C:\Program Files (x86)\Lockheed Martin\Prepar3D v3\Modules\SimConnectP3D2.dll
       16 Found it: trying to connect
       47 FS path = "C:\Program Files (x86)\Lockheed Martin\Prepar3D v3\"
      203 #### Initialising Dlrectinput Axis Scanning ...
      219    Found correct joystick Id 0
      219    ... and a "GUID" value
      219 ... okay, Acquired device as #0!
      219 ---------------------- Joystick Device Scan -----------------------
      219 Checking: \\?\hid#vid_044f&pid_b10a#6&1255c004&1&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}
      219 Product= T.16000M
      219    Manufacturer= Thrustmaster
      219    Vendor=044F, Product=B10A (Version 5.0)
      219    Serial Number= Thrustmaster
      219 Checking: \\?\hid#vid_056a&pid_0027&col02#7&792ed82&0&0001#{4d1e55b2-f16f-11cf-88cb-001111000030}
      219 Checking: \\?\hid#vid_046d&pid_c31c&mi_01&col01#8&3031901a&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}
      219 Checking: \\?\hid#vid_056a&pid_0027&col03#7&792ed82&0&0002#{4d1e55b2-f16f-11cf-88cb-001111000030}
      219 Checking: \\?\hid#vid_046d&pid_c31c&mi_01&col02#8&3031901a&0&0001#{4d1e55b2-f16f-11cf-88cb-001111000030}
      219 Checking: \\?\hid#vid_046d&pid_c31c&mi_01&col03#8&3031901a&0&0002#{4d1e55b2-f16f-11cf-88cb-001111000030}
      219 Checking: \\?\hid#vid_056d&pid_0002#8&260220fe&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}
      235 Checking: \\?\hid#vid_056a&pid_0027&col04#7&792ed82&0&0003#{4d1e55b2-f16f-11cf-88cb-001111000030}
      235 Checking: \\?\hid#vid_056a&pid_0027&col05#7&792ed82&0&0004#{4d1e55b2-f16f-11cf-88cb-001111000030}
      235 Checking: \\?\hid#vid_1493&pid_001b#6&34f5874&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}
 

Share this post


Link to post
Share on other sites

it's crazy, but at the moment fsuipc 4.947a is not working anymore even with extra logging files!

 

Another USB HID device seems to have "come alive", but it is causing the error:

 

From HidScanner:

    172: Error 6 [00000006] returned on HidD_GetAttributes:  (\\?\hid#vid_1493&pid_001b#6&34f5874&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030})

  Device at "\\?\hid#vid_1493&pid_001b#6&34f5874&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}"
  Vendor=007F, Product=0000 (Version 231.22)
  Manufacturer= 
  Product= 
  Serial Number= 

and, not coincidentally I'm sure, the last device being scanned by FSUIPC is that one, here:

235 Checking: \\?\hid#vid_1493&pid_001b#6&34f5874&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}

So it looks like some sort of odd, (not quite valid or normal?), device recorded in Windows, and FSUIPC not properly handling that error 6 return. I think I can track that down now. Thanks very much for the feedback!

 

Pete

Share this post


Link to post
Share on other sites

Could you try FSUIPC 4.947b, just uploaded, please? I've done all I can to avoid a problem with odd devices during the scan. I'm still not totally sure how HidScanner got away with it when FSUIPC didn't! The code is almost identical. Anyway, I've included more precautionary checked.

 

Thanks,

Pete

Share this post


Link to post
Share on other sites

Pete:

 

I tried 4.947b in P3DV3, windows 10.  It crashed shortly after loading.  Log follows:

 

********* FSUIPC4, Version 4.947b by Pete Dowson *********
Reading options from "I:\P3DV3\Modules\FSUIPC4.ini"
Running inside Prepar3D v3 on Windows 10.0
Module base=66070000
User Name="Danny Rice"
User Addr="danny.rice@comcast.net"
FSUIPC4 Key is provided
WideFS7 Key is provided
        0 System time = 11/10/2015 10:38:20
       47 FLT UNC path = "\\DANNY-PC\Users\Danny\Documents\Prepar3D v3 Files\"
       47 Trying I:\P3DV3\Modules\SimConnectP3D2.dll
       47 !!! Error 126: The specified module could not be found. 
       78 Trying to connect to SimConnect Acc/SP2 Oct07 ...
      172 FS UNC path = "\\DANNY-PC\P3DV3\P3DV3\"
      453 Finished: 0 Profile files created
      515 ---------------------- Joystick Device Scan -----------------------
      515 Product= Logitech Extreme 3D Pro
      515    Manufacturer= Logitech
      515    Vendor=046D, Product=C215 (Version 53.0)
      515    Serial Number= Logitech
      515 Product= Pro Flight Cessna Yoke
      515    Manufacturer= Saitek 
      515    Vendor=06A3, Product=0BD3 (Version 1.22)
      515    Serial Number= RD002687
      515 Product= Saitek Pro Flight Rudder Pedals
      515    Manufacturer= Saitek
      515    Vendor=06A3, Product=0763 (Version 1.0)
      515    Serial Number= Saitek
      531 Product= Saitek Pro Flight Quadrant
      531    Manufacturer= Saitek
      531    Vendor=06A3, Product=0C2D (Version 2.0)
      531    Serial Number= Saitek
      531 Product= T.16000M
      531    Manufacturer= Thrustmaster
      531    Vendor=044F, Product=B10A (Version 5.0)
      531    Serial Number= Thrustmaster
      531 Product= Joystick - HOTAS Warthog
      531    Manufacturer= Thustmaster
      531    Vendor=044F, Product=0402 (Version 1.0)
      531    Serial Number= Thustmaster
      531 -------------------------------------------------------------------
      875 LogOptions=10000000 00000001
      875 -------------------------------------------------------------------
      875 ------ Setting the hooks and direct calls into the simulator ------
      875 --- CONTROLS timer memory location obtained ok
      875 --- SIM1 Frictions access gained
      875 --- FS Controls Table located ok
      875 --- Installed Mouse Macro hooks ok.
      875 --- Wind smoothing fix is installed
      875 --- All links checked okay
      875 -------------------------------------------------------------------
      875 VRI port 1 "com7" failed to open
      875 SimConnect_Open succeeded: waiting to check version okay
      875 Trying to use SimConnect Acc/SP2 Oct07
    38156 Running in "Lockheed Martin® Prepar3D® v3", Version: 3.0.3.0 (SimConnect: 3.0.0.0)
    38156 Initialising SimConnect data requests now
    38156 FSUIPC Menu entry added
    38297 \\DANNY-PC\Users\Danny\Documents\Prepar3D v3 Files\UH60 at KOLM.fxml
    38297 \\DANNY-PC\P3DV3\P3DV3\SimObjects\Rotorcraft\Virtavia Sikorsky H-60 Blackhawk\Blackhawk.air
    77156 System time = 11/10/2015 10:39:37, Simulator time = 10:38:59 (17:38Z)
    77562 Aircraft="Virtavia Blackhawk 160thSOAR nd"
    82156 Starting everything now ...
 
Switched back to 4.946 and everything works fine.
 
Danny

Share this post


Link to post
Share on other sites

I tried 4.947b in P3DV3, windows 10.  It crashed shortly after loading.  Log follows:

 

Well, whatever is wrong there it isn't related to the earlier reports in this thread. I need the crash details from Windows event viewer please as there's nothing helpful in the log as far as it got. "Starting everything now" iswhere it is all set up and ready to go.

 

Pete

Share this post


Link to post
Share on other sites
Pete:

 

The contents of the event log are below.

 

Regards,

 

Danny

 

 

Version=1

EventType=APPCRASH

EventTime=130890587827277781

ReportType=2

Consent=1

UploadTime=130890587828218677

ReportIdentifier=0d7f3fb7-703f-11e5-9c24-c86000c29d6e

IntegratorReportIdentifier=881fb0d6-6c82-4880-8264-b7ec769a4ae3

WOW64=1

NsAppName=Prepar3D.exe

Response.BucketId=6542c6c70e2f4020d7360cd46d6b27ad

Response.BucketTable=1

Response.LegacyBucketId=107651510896

Response.type=4

Sig[0].Name=Application Name

Sig[0].Value=Prepar3D.exe

Sig[1].Name=Application Version

Sig[1].Value=3.0.10.14945

Sig[2].Name=Application Timestamp

Sig[2].Value=560b4abe

Sig[3].Name=Fault Module Name

Sig[3].Value=FSUIPC4.dll

Sig[4].Name=Fault Module Version

Sig[4].Value=4.9.4.7

Sig[5].Name=Fault Module Timestamp

Sig[5].Value=561a7ad2

Sig[6].Name=Exception Code

Sig[6].Value=c0000005

Sig[7].Name=Exception Offset

Sig[7].Value=00087172

DynamicSig[1].Name=OS Version

DynamicSig[1].Value=10.0.10240.2.0.0.768.101

DynamicSig[2].Name=Locale ID

DynamicSig[2].Value=1033

DynamicSig[22].Name=Additional Information 1

DynamicSig[22].Value=bdcb

DynamicSig[23].Name=Additional Information 2

DynamicSig[23].Value=bdcb33e65a9843796b7ec31cc25bda3b

DynamicSig[24].Name=Additional Information 3

DynamicSig[24].Value=689d

DynamicSig[25].Name=Additional Information 4

DynamicSig[25].Value=689d12abf00dd47c453b5e1a156c0fa3

UI[2]=I:\P3DV3\Prepar3D.exe

UI[3]=Prepar3D exe has stopped working

UI[4]=Windows can check online for a solution to the problem.

UI[5]=Check online for a solution and close the program

UI[6]=Check online for a solution later and close the program

UI[7]=Close the program

LoadedModule[0]=I:\P3DV3\Prepar3D.exe

LoadedModule[1]=C:\WINDOWS\SYSTEM32\ntdll.dll

LoadedModule[2]=C:\WINDOWS\SYSTEM32\KERNEL32.DLL

LoadedModule[3]=C:\WINDOWS\SYSTEM32\KERNELBASE.dll

LoadedModule[4]=C:\WINDOWS\SYSTEM32\USER32.dll

LoadedModule[5]=C:\WINDOWS\SYSTEM32\GDI32.dll

LoadedModule[6]=C:\WINDOWS\SYSTEM32\ole32.dll

LoadedModule[7]=C:\WINDOWS\SYSTEM32\combase.dll

LoadedModule[8]=C:\WINDOWS\SYSTEM32\msvcrt.dll

LoadedModule[9]=C:\WINDOWS\SYSTEM32\RPCRT4.dll

LoadedModule[10]=C:\WINDOWS\SYSTEM32\SspiCli.dll

LoadedModule[11]=C:\WINDOWS\SYSTEM32\CRYPTBASE.dll

LoadedModule[12]=C:\WINDOWS\SYSTEM32\bcryptPrimitives.dll

LoadedModule[13]=C:\WINDOWS\SYSTEM32\sechost.dll

LoadedModule[14]=I:\P3DV3\api.dll

LoadedModule[15]=C:\WINDOWS\SYSTEM32\MSVCP120.dll

LoadedModule[16]=C:\WINDOWS\SYSTEM32\MSVCR120.dll

LoadedModule[17]=C:\WINDOWS\SYSTEM32\MSWSOCK.dll

LoadedModule[18]=C:\WINDOWS\SYSTEM32\WINHTTP.dll

LoadedModule[19]=C:\WINDOWS\SYSTEM32\IMM32.dll

LoadedModule[20]=C:\WINDOWS\SYSTEM32\MSCTF.dll

LoadedModule[21]=C:\WINDOWS\SYSTEM32\Cabinet.dll

LoadedModule[22]=C:\WINDOWS\SYSTEM32\WS2_32.dll

LoadedModule[23]=C:\WINDOWS\SYSTEM32\ADVAPI32.dll

LoadedModule[24]=C:\WINDOWS\SYSTEM32\NSI.dll

LoadedModule[25]=C:\WINDOWS\SYSTEM32\SHELL32.dll

LoadedModule[26]=C:\WINDOWS\SYSTEM32\WINMM.dll

LoadedModule[27]=C:\WINDOWS\SYSTEM32\windows.storage.dll

LoadedModule[28]=C:\WINDOWS\WinSxS\x86_microsoft.windows.common-controls_6595b64144ccf1df_5.82.10240.16384_none_49c02355cf03478c\COMCTL32.dll

LoadedModule[29]=C:\WINDOWS\SYSTEM32\shlwapi.dll

LoadedModule[30]=C:\WINDOWS\SYSTEM32\VERSION.dll

LoadedModule[31]=C:\WINDOWS\SYSTEM32\kernel.appcore.dll

LoadedModule[32]=C:\WINDOWS\SYSTEM32\shcore.dll

LoadedModule[33]=C:\WINDOWS\SYSTEM32\powrprof.dll

LoadedModule[34]=C:\WINDOWS\SYSTEM32\WINMMBASE.dll

LoadedModule[35]=C:\WINDOWS\SYSTEM32\profapi.dll

LoadedModule[36]=C:\WINDOWS\SYSTEM32\cfgmgr32.dll

LoadedModule[37]=C:\WINDOWS\SYSTEM32\CRYPT32.dll

LoadedModule[38]=C:\WINDOWS\SYSTEM32\MSASN1.dll

LoadedModule[39]=I:\P3DV3\acontain.dll

LoadedModule[40]=I:\P3DV3\ai_player.dll

LoadedModule[41]=I:\P3DV3\atc.dll

LoadedModule[42]=I:\P3DV3\controls.dll

LoadedModule[43]=I:\P3DV3\demo.dll

LoadedModule[44]=C:\WINDOWS\SYSTEM32\SETUPAPI.dll

LoadedModule[45]=I:\P3DV3\facilities.dll

LoadedModule[46]=C:\WINDOWS\SYSTEM32\OLEAUT32.dll

LoadedModule[47]=I:\P3DV3\fe.dll

LoadedModule[48]=I:\P3DV3\flight.dll

LoadedModule[49]=I:\P3DV3\fs-traffic.dll

LoadedModule[50]=I:\P3DV3\g2d.dll

LoadedModule[51]=I:\P3DV3\g3d.dll

LoadedModule[52]=I:\P3DV3\gps.dll

LoadedModule[53]=I:\P3DV3\livingwater.dll

LoadedModule[54]=I:\P3DV3\main.dll

LoadedModule[55]=I:\P3DV3\menus.dll

LoadedModule[56]=C:\WINDOWS\SYSTEM32\COMDLG32.dll

LoadedModule[57]=I:\P3DV3\multiplayer.dll

LoadedModule[58]=I:\P3DV3\pdk.dll

LoadedModule[59]=I:\P3DV3\panels.dll

LoadedModule[60]=I:\P3DV3\sim1.dll

LoadedModule[61]=I:\P3DV3\simscheduler.dll

LoadedModule[62]=I:\P3DV3\simprop.dll

LoadedModule[63]=I:\P3DV3\sound.dll

LoadedModule[64]=I:\P3DV3\symmap.dll

LoadedModule[65]=I:\P3DV3\terrain.dll

LoadedModule[66]=I:\P3DV3\util.dll

LoadedModule[67]=I:\P3DV3\visualfx.dll

LoadedModule[68]=I:\P3DV3\weather.dll

LoadedModule[69]=I:\P3DV3\window.dll

LoadedModule[70]=C:\WINDOWS\SYSTEM32\DEVOBJ.dll

LoadedModule[71]=C:\WINDOWS\SYSTEM32\WLDAP32.dll

LoadedModule[72]=C:\WINDOWS\SYSTEM32\HID.DLL

LoadedModule[73]=C:\WINDOWS\SYSTEM32\USERENV.dll

LoadedModule[74]=C:\WINDOWS\SYSTEM32\DSOUND.dll

LoadedModule[75]=C:\WINDOWS\SYSTEM32\MSACM32.dll

LoadedModule[76]=C:\WINDOWS\SYSTEM32\dxgi.dll

LoadedModule[77]=C:\WINDOWS\SYSTEM32\d3d9.dll

LoadedModule[78]=C:\WINDOWS\SYSTEM32\d3d11.dll

LoadedModule[79]=C:\WINDOWS\SYSTEM32\D3DCOMPILER_43.dll

LoadedModule[80]=C:\WINDOWS\SYSTEM32\OPENGL32.dll

LoadedModule[81]=C:\WINDOWS\SYSTEM32\GLU32.dll

LoadedModule[82]=C:\WINDOWS\SYSTEM32\d3dx9_43.dll

LoadedModule[83]=C:\WINDOWS\SYSTEM32\d3dx11_43.dll

LoadedModule[84]=C:\WINDOWS\SYSTEM32\DDRAW.dll

LoadedModule[85]=C:\WINDOWS\SYSTEM32\dwmapi.dll

LoadedModule[86]=C:\WINDOWS\SYSTEM32\DCIMAN32.dll

LoadedModule[87]=I:\P3DV3\language.dll

LoadedModule[88]=C:\WINDOWS\SYSTEM32\bcrypt.dll

LoadedModule[89]=C:\WINDOWS\system32\uxtheme.dll

LoadedModule[90]=C:\Program Files (x86)\RivaTuner Statistics Server\RTSSHooks.dll

LoadedModule[91]=C:\WINDOWS\WinSxS\x86_microsoft.vc90.crt_1fc8b3b9a1e18e3b_9.0.30729.9158_none_5091b51ebcb97cdc\MSVCR90.dll

LoadedModule[92]=C:\WINDOWS\SYSTEM32\clbcatq.dll

LoadedModule[93]=C:\WINDOWS\system32\nvspcap.dll

LoadedModule[94]=C:\WINDOWS\SYSTEM32\PSAPI.DLL

LoadedModule[95]=C:\WINDOWS\system32\nvapi.dll

LoadedModule[96]=C:\Program Files (x86)\NVIDIA Corporation\3D Vision\nvSCPAPI.dll

LoadedModule[97]=C:\WINDOWS\SYSTEM32\d3d10.dll

LoadedModule[98]=C:\WINDOWS\SYSTEM32\d3d10core.dll

LoadedModule[99]=C:\WINDOWS\SYSTEM32\MSXML6.DLL

LoadedModule[100]=C:\WINDOWS\SYSTEM32\ntmarta.dll

LoadedModule[101]=C:\WINDOWS\SYSTEM32\PROPSYS.dll

LoadedModule[102]=I:\P3DV3\uiInterface.dll

LoadedModule[103]=C:\WINDOWS\SYSTEM32\mscoree.dll

LoadedModule[104]=C:\Windows\Microsoft.NET\Framework\v4.0.30319\mscoreei.dll

LoadedModule[105]=C:\Windows\Microsoft.NET\Framework\v4.0.30319\clr.dll

LoadedModule[106]=C:\WINDOWS\SYSTEM32\MSVCR120_CLR0400.dll

LoadedModule[107]=C:\Windows\Microsoft.NET\Framework\v4.0.30319\clrjit.dll

LoadedModule[108]=C:\WINDOWS\SYSTEM32\CRYPTSP.dll

LoadedModule[109]=C:\WINDOWS\system32\rsaenh.dll

LoadedModule[110]=C:\WINDOWS\SYSTEM32\dwrite.dll

LoadedModule[111]=C:\Windows\Microsoft.NET\Framework\v4.0.30319\WPF\wpfgfx_v0400.dll

LoadedModule[112]=C:\Windows\Microsoft.NET\Framework\v4.0.30319\WPF\PresentationNative_v0400.dll

LoadedModule[113]=C:\WINDOWS\SYSTEM32\iphlpapi.dll

LoadedModule[114]=C:\WINDOWS\SYSTEM32\WINNSI.DLL

LoadedModule[115]=C:\WINDOWS\SYSTEM32\dhcpcsvc6.DLL

LoadedModule[116]=C:\WINDOWS\SYSTEM32\dhcpcsvc.DLL

LoadedModule[117]=C:\WINDOWS\SYSTEM32\DNSAPI.dll

LoadedModule[118]=C:\Program Files (x86)\Bonjour\mdnsNSP.dll

LoadedModule[119]=C:\WINDOWS\System32\fwpuclnt.dll

LoadedModule[120]=C:\Windows\System32\rasadhlp.dll

LoadedModule[121]=C:\WINDOWS\SYSTEM32\nvwgf2um.dll

LoadedModule[122]=C:\WINDOWS\SYSTEM32\WTSAPI32.DLL

LoadedModule[123]=C:\WINDOWS\SYSTEM32\WINSTA.dll

LoadedModule[124]=C:\WINDOWS\SYSTEM32\apphelp.dll

LoadedModule[125]=C:\Program Files (x86)\FileZilla FTP Client\fzshellext.dll

LoadedModule[126]=C:\WINDOWS\system32\ntshrui.dll

LoadedModule[127]=C:\WINDOWS\system32\srvcli.dll

LoadedModule[128]=C:\WINDOWS\SYSTEM32\cscapi.dll

LoadedModule[129]=C:\WINDOWS\WinSxS\x86_microsoft.windows.common-controls_6595b64144ccf1df_6.0.10240.16384_none_3bccb1ff6bcd1849\comctl32.dll

LoadedModule[130]=C:\WINDOWS\system32\netutils.dll

LoadedModule[131]=C:\WINDOWS\SYSTEM32\coml2.dll

LoadedModule[132]=C:\WINDOWS\system32\mssprxy.dll

LoadedModule[133]=C:\WINDOWS\System32\MMDevApi.dll

LoadedModule[134]=C:\WINDOWS\SYSTEM32\AUDIOSES.DLL

LoadedModule[135]=C:\WINDOWS\SYSTEM32\wintypes.dll

LoadedModule[136]=C:\WINDOWS\SYSTEM32\XInput9_1_0.dll

LoadedModule[137]=C:\WINDOWS\SYSTEM32\urlmon.dll

LoadedModule[138]=C:\WINDOWS\SYSTEM32\iertutil.dll

LoadedModule[139]=C:\WINDOWS\SYSTEM32\WindowsCodecs.dll

LoadedModule[140]=C:\WINDOWS\SYSTEM32\nvd3dum.dll

LoadedModule[141]=I:\P3DV3\Gauges\TargetInfo.dll

LoadedModule[142]=C:\WINDOWS\SYSTEM32\wdmaud.drv

LoadedModule[143]=C:\WINDOWS\SYSTEM32\ksuser.dll

LoadedModule[144]=C:\WINDOWS\SYSTEM32\AVRT.dll

LoadedModule[145]=C:\WINDOWS\SYSTEM32\msacm32.drv

LoadedModule[146]=C:\WINDOWS\SYSTEM32\midimap.dll

LoadedModule[147]=I:\P3DV3\radar.dll

LoadedModule[148]=I:\P3DV3\D3DCOMPILER_47.dll

LoadedModule[149]=I:\P3DV3\Oculus.dll

LoadedModule[150]=C:\WINDOWS\SYSTEM32\dbghelp.dll

LoadedModule[151]=I:\P3DV3\ControllableCamera.dll

LoadedModule[152]=I:\P3DV3\Modules\FSUIPC4.dll

LoadedModule[153]=C:\WINDOWS\SYSTEM32\DINPUT8.dll

LoadedModule[154]=C:\WINDOWS\SYSTEM32\SHFolder.DLL

LoadedModule[155]=C:\WINDOWS\WinSxS\x86_microsoft.flightsimulator.simconnect_67c7c14424d61b5b_10.0.61259.0_none_55f5ecdc14f60568\SimConnect.dll

LoadedModule[156]=C:\WINDOWS\WinSxS\x86_microsoft.vc80.crt_1fc8b3b9a1e18e3b_8.0.50727.9185_none_d0905a48442809b8\MSVCR80.dll

LoadedModule[157]=C:\WINDOWS\WinSxS\x86_microsoft.vc80.crt_1fc8b3b9a1e18e3b_8.0.50727.9185_none_d0905a48442809b8\MSVCP80.dll

LoadedModule[158]=C:\WINDOWS\SYSTEM32\DINPUT.DLL

LoadedModule[159]=C:\WINDOWS\SYSTEM32\WINTRUST.dll

LoadedModule[160]=I:\P3DV3\Modules\OpusPDK_v3.DLL

LoadedModule[161]=C:\WINDOWS\SYSTEM32\MSVCR100.dll

LoadedModule[162]=I:\P3DV3\Modules\DafWings.dll

LoadedModule[163]=C:\WINDOWS\SYSTEM32\DPLAYX.dll

LoadedModule[164]=C:\WINDOWS\SYSTEM32\MSIMG32.dll

LoadedModule[165]=C:\WINDOWS\SYSTEM32\WINSPOOL.DRV

LoadedModule[166]=C:\WINDOWS\WinSxS\x86_microsoft.windows.gdiplus_6595b64144ccf1df_1.1.10240.16384_none_d15682eeaf714889\gdiplus.dll

LoadedModule[167]=C:\WINDOWS\SYSTEM32\OLEACC.dll

LoadedModule[168]=C:\WINDOWS\SYSTEM32\WININET.dll

LoadedModule[169]=C:\WINDOWS\SYSTEM32\RICHED32.DLL

LoadedModule[170]=C:\WINDOWS\SYSTEM32\RICHED20.dll

LoadedModule[171]=C:\WINDOWS\SYSTEM32\USP10.dll

LoadedModule[172]=C:\WINDOWS\SYSTEM32\msls31.dll

LoadedModule[173]=I:\P3DV3\SimDirector.dll

LoadedModule[174]=I:\P3DV3\BGLCompLib.dll

LoadedModule[175]=I:\P3DV3\simpropext.dll

LoadedModule[176]=C:\WINDOWS\SYSTEM32\XInput1_4.dll

LoadedModule[177]=C:\WINDOWS\system32\wbem\wbemprox.dll

LoadedModule[178]=C:\WINDOWS\SYSTEM32\wbemcomn.dll

LoadedModule[179]=C:\WINDOWS\system32\wbem\wbemsvc.dll

LoadedModule[180]=C:\WINDOWS\system32\wbem\fastprox.dll

LoadedModule[181]=I:\Addons\gauges\AS532AFCP.gau

LoadedModule[182]=I:\P3DV3\HAPX.DLL

LoadedModule[183]=C:\WINDOWS\SYSTEM32\mscms.dll

LoadedModule[184]=C:\WINDOWS\SYSTEM32\WindowsCodecsExt.dll

LoadedModule[185]=C:\WINDOWS\SYSTEM32\icm32.dll

LoadedModule[186]=C:\Windows\Microsoft.NET\Framework\v4.0.30319\webengine4.dll

LoadedModule[187]=C:\Program Files (x86)\HIDMacro\Winhook.dll

LoadedModule[188]=C:\WINDOWS\system32\dataexchange.dll

LoadedModule[189]=C:\WINDOWS\system32\d2d1.dll

LoadedModule[190]=C:\WINDOWS\system32\dcomp.dll

LoadedModule[191]=C:\WINDOWS\system32\twinapi.appcore.dll

LoadedModule[192]=C:\WINDOWS\system32\msctfui.dll

LoadedModule[193]=C:\WINDOWS\SYSTEM32\UIAutomationCore.dll

LoadedModule[194]=C:\WINDOWS\SYSTEM32\msiltcfg.dll

LoadedModule[195]=C:\WINDOWS\SYSTEM32\msi.dll

LoadedModule[196]=C:\WINDOWS\SYSTEM32\sxs.dll

LoadedModule[197]=C:\Windows\SYSTEM32\ieframe.dll

LoadedModule[198]=C:\Windows\SYSTEM32\mshtml.dll

LoadedModule[199]=C:\WINDOWS\SYSTEM32\ieapfltr.dll

LoadedModule[200]=C:\Windows\System32\vaultcli.dll

LoadedModule[201]=C:\WINDOWS\SYSTEM32\Secur32.dll

LoadedModule[202]=C:\WINDOWS\SYSTEM32\MLANG.dll

LoadedModule[203]=I:\P3DV3\TritonResources\vc12\win32\TritonCUDA-MT-DLL.dll

LoadedModule[204]=I:\P3DV3\TritonResources\dll\cudart32_42_9.dll

LoadedModule[205]=I:\P3DV3\TritonResources\dll\cufft32_42_9.dll

LoadedModule[206]=C:\WINDOWS\SYSTEM32\MSVCP100.dll

LoadedModule[207]=C:\WINDOWS\SYSTEM32\nvcuda.dll

State[0].Key=Transport.DoneStage1

State[0].Value=1

FriendlyEventName=Stopped working

ConsentKey=APPCRASH

AppName=Prepar3D exe

AppPath=I:\P3DV3\Prepar3D.exe

NsPartner=windows

NsGroup=windows8

ApplicationIdentity=EF24156912BB64EBC47D28B48728A7DC

 

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
Sign in to follow this  

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use. Guidelines Privacy Policy We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.