Jump to content
The simFlight Network Forums

P3D Version 3.0 crashes when operate left button on Saitek Throttle


Recommended Posts

Dear Pete and P3D experts

 

I installed P3D Version 3.0 without addon airplanes.

 

I installed and  registered your last FSUIPC 4.948 suitable for P3D-3.0

 

I can adapt all SAITEK controller using FSUIPC but remaining one serious trouble causing P3D to Crash.

 

On the SAITEK throttle quadrant, the left (using for the flaps) of the three button causes  P3D crash but the middle and the right one does not make any  problem and also the 3 levers works well.

 

If  I de-install FSUIPC and if I switch the throttle buttons withhin the P3D menue the P3D does not Crash.

 

I appreciate your help.

 

Thanks and regards Roger

Link to comment
Share on other sites

I have a somewhat similar problem.

 

I am using a cougar mfd and clicking on button 19 causes a CTD

LIke you, removing FSUIPC and again pressing button 19 does not cause a CTD.

This happens with the default aircraft F22 or any other aircraft.

 

Also, if I use LINDA, the console shows the following errors after the crash

 

(E) Hook Error cant find SIM1.DLL

(E) Hook Error cant find VISUALFX.DLL

 

Thanks

Link to comment
Share on other sites

I have a somewhat similar problem.

 

I am using a cougar mfd and clicking on button 19 causes a CTD

LIke you, removing FSUIPC and again pressing button 19 does not cause a CTD.

This happens with the default aircraft F22 or any other aircraft.

 

Also, if I use LINDA, the console shows the following errors after the crash

 

(E) Hook Error cant find SIM1.DLL

(E) Hook Error cant find VISUALFX.DLL

 

Thanks

 

First download this update:

 

FSUIPC4948c_TEST.zip

 

Then try again. I then need to see the FSUIPC4 LOG file,please. It looks like you have a bad P3D install.

 

Pete

Link to comment
Share on other sites

Thanks for helping me with this problem.

Your tireless work is much appreciated. 

 

I tried the FSUIPC test dll with the same result.

 

Here is the log.

********* FSUIPC4, Version 4.948c by Pete Dowson *********
Prepar3D.exe version = 3.0.14945.14945
Reading options from "C:\Program Files (x86)\Lockheed Martin\Prepar3D v3\Modules\FSUIPC4.ini"
Running inside Prepar3D v3 on Windows 7
Module base=57470000
User Name="xxxxxx xxxxxx"
User Addr="xxxxxxx xxxxxxx"
FSUIPC4 Key is provided
WideFS7 Key is provided
      219 System time = 07/12/2015 20:43:31
      219 FLT UNC path = "\\P3D\Prepar3D v3 Files\"
      219 ------ Module Version Check ------
      219        acontain.dll: 3.0.10.14945
      219             api.dll: 3.0.10.14945
      219        controls.dll: 3.0.10.14945
      219      fs-traffic.dll: 3.0.10.14945
      219             G3D.dll: 3.0.10.14945
      219            sim1.dll: 3.0.10.14945
      219        visualfx.dll: 3.0.10.14945
      219         weather.dll: 3.0.10.14945
      219          window.dll: 3.0.10.14945
      219 ----------------------------------
      219 Trying C:\Program Files (x86)\Lockheed Martin\Prepar3D v3\Modules\SimConnectP3D2.dll
      219 Found it: trying to connect
      234 FS UNC path = "\\P3D\Prepar3D v32\"
      515 ---------------------- Joystick Device Scan -----------------------
      515 Product= 
      515    Manufacturer= 
      515    Vendor=046D, Product=C2AB (Version 0.1)
      515    Serial Number= 
      515 Product= Saitek AV8R Joystick
      515    Manufacturer= 
      515    Vendor=06A3, Product=0461 (Version 1.18)
      515    Serial Number= 
      531 Product= Saitek Pro Flight Quadrant
      531    Manufacturer= Saitek
      531    Vendor=06A3, Product=0C2D (Version 2.1)
      531    Serial Number= 
      531 -------------------------------------------------------------------
      640 LogOptions=00000000 00000001
      655 -------------------------------------------------------------------
      655 ------ Setting the hooks and direct calls into the simulator ------
      655 --- CONTROLS timer memory location obtained ok
      655 --- SIM1 Frictions access gained
      655 --- FS Controls Table located ok
      655 --- Installed Mouse Macro hooks ok.
      655 --- Wind smoothing fix is installed
      655 --- All links okay (except older global weather setting method)
      655 -------------------------------------------------------------------
      655 SimConnect_Open succeeded: waiting to check version okay
      655 Trying to use SimConnect Prepar3D
      671 VRI port 1 "com3" opened
     3869 Running in "Lockheed Martin® Prepar3D® v3", Version: 3.0.3.0 (SimConnect: 3.0.0.0)
     3869 Initialising SimConnect data requests now
     3869 FSUIPC Menu entry added
     3885 \\P3D\SIM\AppData\Local\Lockheed Martin\Prepar3D v3\Prepar3D_Default.fxml
     3885 \\P3D\Prepar3D v32\SimObjects\Airplanes\IRIS Raptor Driver\Raptor.air
     4119 VRI FMER ("MCP Combi") detected on port com3
    27815 System time = 07/12/2015 20:43:59, Simulator time = 08:00:01 (13:00Z)
    27909 Aircraft="F-22 Raptor - 525th Fighter Squadron"
    28829 Starting everything now ...
    28829 LUA.0: beginning "C:\Program Files (x86)\Lockheed Martin\Prepar3D v3\Modules\ipcReady.lua"
    28829 LUA.0: ended "C:\Program Files (x86)\Lockheed Martin\Prepar3D v3\Modules\ipcReady.lua"
    28845 LUA.1: 
 
 
    28845 LUA.1: [iNIT]LINDA:: Loading...
    28876 ASN active function link set
    28876 Ready for ASN WX radar
    28938 LUA.1: LINDA:: Aircraft: F-22 Raptor - 525th Fighter Squadro
    28938 LUA.1: LINDA:: Aircraft module detected: FSX Default
    28970 LUA.0: LINDA:: AivlaSoft library loaded...
    28970 LUA.0: LINDA:: FSX standard library loaded...
    28985 LUA.0: LINDA:: IVAO library loaded...
    28985 LUA.0: LINDA:: RealityXP library loaded...
    28985 LUA.0: LINDA:: Weather library loaded...
    29001 LUA.0: LINDA:: A2A MAP library loaded...
    30140 Advanced Weather Interface Enabled
    30186 LUA.0: LINDA:: RADIOS : Empty command for :: COM1 Select
    31590 LUA.0: LINDA:: Module: FSX Default Started...
    31590 LUA.0: LINDA:: Ready to go, Captain!
    31590 LUA.0: LINDA:: 
    63758 Hook Error: can't find .1464991384 in SIM1.dll
    63758 Hook Error: can't find .1464991384 in VISUALFX.dll
Link to comment
Share on other sites

Hello Pete

 

Thanks for your Support.

 

I kopied your FSUIPC.dll into my P3D but the same result.

 

P3d crashes when using the left button  of the SAITEK throttle quadrant.

 

Here is the log Content:

 

********* FSUIPC4, Version 4.948c by Pete Dowson *********
User Name="changed by user1"
User Addr="changed by user"
FSUIPC4 Key is provided
WIDEFS7 not user registered, or expired
   140563 System time = 08/12/2015 07:44:57, Simulator time = 07:42:44 (06:42Z)
   140563 FLT path = "C:\Users\User\Documents\Prepar3D v3 Files\"
[Continuation log requested by user]
Running inside Prepar3D v3 on Windows 8.0
Module base=586B0000
   140563 LogOptions changed, now F0000000 0000001F
   141063 Ready Flags: Ready-To-Fly=Y, In Menu=N, In Dlg=N
   141094 Weather Read request (Global set) to area 1: ICAO="GLOB", Req=0
   141094 Weather Received (type 1 request, (null)): "GLOB&A0 000000Z 30110KT&D900NG 300V302 30125KT&A1026LG 295V307 80KM&B-423&D3048 1CU033&CU001FLLN000N 8CI328&CI001FNMN000L 18/12 05/04&A1026 Q0999 @@@ 34 5 301 25 | "
   141094 WX Received in (0 mSecs), WX request type 1, ICAO=GLOB
   141094  Results: FS98 Pressure=999.5 mb
   141094  Results: FS98 Wind0: ground (1417ft) to -1410ft AGL, dir 0M, vel 0, gust 0, turb 0
   141094  Results: FS98 AmbientWind at PlaneAlt=1417: dir 301T, vel 10
   141094  Results: FS98 CurrTemp at PlaneAlt=1417: 13C
   142094 ***  AXIS: Cntrl= 65762 (0x000100e2), Param= 64 (0x00000040) AXIS_ELEVATOR_SET
   143109 Weather Read request (Nr Station) to area 5: Lat=47.46, Lon=8.57, Alt=0.0, Req=1
   143109 Weather Received (type 5 request, Nearest): "LSZH&A432 300700Z 30110KT&D0NG 300V302 30124KT&A594NG 295V306 80KM&B-855&D3048 1CU019&CU001FLLN000N 8CI314&CI001FNMN000L 18/12 05/04&A594 Q0999 @@@ 34 5 301 24 | "
   143109 WX Received in (0 mSecs), WX request type 5, Lat=47.4566, Lon=8.5699, Alt=0.0m
   143109 >Change:  FS98 Vis: range =0sm, (raw value=0)
   143109 >Change:  FS98 Temp0: to 1420ft, Day 0.0C, NightVar 0.0C
   143109 >Change:  FS98 Dewpoint Control: disabled
   143109 >Change:  FS98 Precip Control: disabled
   145422 Weather Read request (At Aircrft) to area 4: Lat=47.46, Lon=8.57, Alt=432.8, Req=2
   145422 Weather Received (type 4 request, Interpolated): "????&A0 080642Z 30110KT&D0NG 300V302 80KM&B-423&D3048 1CU033&CU001FLLN000N 8CI328&CI001FNMN000L 12/08 Q0999 "
   145422 WX Received in (0 mSecs), WX request type 4, Lat=47.4566, Lon=8.5699, Alt=432.8m
   147516 *** EVENT: Cntrl= 65752 (0x000100d8), Param= 0 (0x00000000) PARKING_BRAKES
   147594 Weather Read request (Nr Station) to area 5: Lat=47.46, Lon=8.57, Alt=0.0, Req=1
   147594 Weather Received (type 5 request, Nearest): "LSZH&A432 300700Z 30110KT&D0NG 300V302 30124KT&A594NG 295V306 80KM&B-855&D3048 1CU019&CU001FLLN000N 8CI314&CI001FNMN000L 18/12 05/04&A594 Q0999 @@@ 34 5 301 24 | "
   147594 WX Received in (0 mSecs), WX request type 5, Lat=47.4566, Lon=8.5699, Alt=0.0m
   147594 >Change:  Pressure=999.0 mb
   147594 >Change:  Surface wind: to alt=1420ft, dir=301T, vel=10.0, gust=0.0, turb=0, shear=0, var=2.0
   147594 >Change:  Wind layer 1: to alt=6365ft, dir=301T, vel=10.0, gust=0.0, turb=0, shear=0, var=2.0
   147594 >Change:  Visibility[0]: range=49.7sm (80000m), from=-1380ft, to=8610ft
   147594 >Change:  Cloud[0]: type=9, from 3300ft to 7300ft (+/- 0ft), cover=1, turb=1, topshape=0
   147594 >Change:                      Precip=0, base=0ft, rate=0, icing=0
   147594 >Change:  Cloud[1]: type=1, from 32800ft to 33000ft (+/- 0ft), cover=8, turb=0, topshape=0
   147594 >Change:                      Precip=0, base=0ft, rate=0, icing=2
   147594 >Change:  Temperature[0]: alt=1420ft, Day=12.0 C, NightVar=0.0 C, DewPt=8.0 C
   147594 >Change:  Temperature[1]: alt=3366ft, Day=5.0 C, NightVar=0.0 C, DewPt=4.0 C
   147594  Results: FS98 Wind0: ground (1417ft) to 0ft AGL, dir 299M, vel 10, gust 0, turb 0
   147594  Results: FS98 Wind1: 1420ft to 6365ft AMSL, dir=300T, vel 10, gust 0, turb 0
   147594  Results: FS98 Vis: range =50sm, (raw value=4971)
   147594  Results: FS98 Cloud1: type=9, from 3300ft to 7300ft (+/- 0ft), cover 1, turb 72, ice 0
   147594  Results: FS98 Cloud2: type=1, from 32800ft to 33000ft (+/- 0ft), cover 8, turb 0, ice 2
   147594  Results: FS98 Temp0: to 1420ft, Day 12.0C, NightVar 0.0C
   147594  Results: FS98 Temp1: to 3366ft, Day 5.0C
   148016 *** EVENT: Cntrl= 65752 (0x000100d8), Param= 0 (0x00000000) PARKING_BRAKES
   149344 Button changed: bRef=0, Joy=0, Btn=0, Pressed
   149344 [buttons.Maule M7 260C] 0=P0,0,C65603,0
   149344 FS Control Sent: Ctrl=65603, Param=0
   149344 *** EVENT: Cntrl= 65603 (0x00010043), Param= 0 (0x00000000) FLAPS_DOWN
   149344 *** EVENT: Cntrl= 65758 (0x000100de), Param= 0 (0x00000000) FLAPS_INCR
   149672 Button changed: bRef=0, Joy=0, Btn=0, Released
   149672 [buttons.Maule M7 260C] 3=U0,0,C65759,0
   149672 FS Control Sent: Ctrl=65759, Param=0
   149672 *** EVENT: Cntrl= 65759 (0x000100df), Param= 0 (0x00000000) FLAPS_DECR
   149781 Weather Read request (Global set) to area 1: ICAO="GLOB", Req=0
   149781 Weather Received (type 1 request, (null)): "GLOB&A0 000000Z 30110KT&D900NG 300V302 30125KT&A1026LG 295V307 80KM&B-423&D3048 1CU033&CU001FLLN000N 8CI328&CI001FNMN000L 18/12 05/04&A1026 Q0999 @@@ 34 5 301 25 | "
   149781 WX Received in (0 mSecs), WX request type 1, ICAO=GLOB
   150484 Button changed: bRef=0, Joy=0, Btn=1, Pressed
   150484 [buttons.Maule M7 260C] 2=P0,1,C65733,0
   150484 FS Control Sent: Ctrl=65733, Param=0
   150484 *** EVENT: Cntrl= 65733 (0x000100c5), Param= 0 (0x00000000) ABORT
   151156 Ready Flags: Ready-To-Fly=Y, In Menu=Y, In Dlg=Y
   162547 === NOTE: not calling SimConnect_Close ...
   163547 System time = 08/12/2015 07:45:20, Simulator time = 07:42:54 (06:42Z)
   163547 *** FSUIPC log file being closed
Minimum frame rate was 27.7 fps, Maximum was 28.8 fps
Minimum available memory recorded was 2078Mb
Average frame rate for running time of 20 secs = 24.1 fps
Memory managed: 10 Allocs, 10 Freed
********* FSUIPC Log file closed **

Link to comment
Share on other sites

Hello Pete

 

Thanks for your Support.

 

I kopied your FSUIPC.dll into my P3D but the same result.

 

P3d crashes when using the left button  of the SAITEK throttle quadrant.

 

Here is the log Content:

 

The log is not so good. To start with it is a "continued" log -- you pressed the New Log button for some reason. Please do not, You've lost all the initialisation data. Second, the sim did not crash in this log, it terminated normally as you can see at the end. Thirdly, why are you logging weather and so on? That just fills up the log with irrelevant things.

 

I don't know any way pressing a button on a joystick can crash FS or P3D. What is it assigned to do? Is it this button, pressed near the end?

 

   150484 Button changed: bRef=0, Joy=0, Btn=1, Pressed

   150484 [buttons.Maule M7 260C] 2=P0,1,C65733,0

   150484 FS Control Sent: Ctrl=65733, Param=0

   150484 *** EVENT: Cntrl= 65733 (0x000100c5), Param= 0 (0x00000000) ABORT

 

Why are you assigning to ABORT? That presumably tells P3D to close (I've never used ABORT). Is the fact that you are telling P3D to close and it is doing so, quite normally, confusing you?

 

Pete

Link to comment
Share on other sites

Thanks for helping me with this problem.

Your tireless work is much appreciated. 

 

I tried the FSUIPC test dll with the same result.

 

Here is the log.

 

You need to ask LINDA support what is going on at this point: Was there a cTD there too? Is it the same as the button 19 crash?

 

    31590 LUA.0: LINDA:: Ready to go, Captain!

    31590 LUA.0: LINDA:: 
    63758 Hook Error: can't find .1464991384 in SIM1.dll
    63758 Hook Error: can't find .1464991384 in VISUALFX.dll

 

That's very strange. It looks like there's some sort of corruption occuring there.  But what is LINDA doing?

 

I suspect it is still a P3D crash in their joystick support.

 

Don't you have any crash data, like the module name and offset? On a CTD there will be data in the Windows Event Viewer.

 

On the earlier report you said it crashed on pressing "button 19". What is that assigned to?

 

Pete

Link to comment
Share on other sites

Dear Pete

 

This is my next logging file without weather logging.

 

I deleted Abort within the FSUIPC button controll.

 

Anyway P3D  still Closes when use the left button on the throttle Quadrant.

 

 

********* FSUIPC4, Version 4.948c by Pete Dowson *********
Prepar3D.exe version = 3.0.10.14945
Reading options from "C:\Program Files\Prepar3D v3\Modules\FSUIPC4.ini"
Running inside Prepar3D v3 on Windows 8.0
Module base=59A30000
User Name=""
User Addr="--"
FSUIPC4 Key is provided
WIDEFS7 not user registered, or expired
       47 System time = 08/12/2015 12:36:24
       47 FLT path = "C:\Users\User\Documents\Prepar3D v3 Files\"
       47 ------ Module Version Check ------
       47        acontain.dll: 3.0.10.14945
       47             api.dll: 3.0.10.14945
       47        controls.dll: 3.0.10.14945
       47      fs-traffic.dll: 3.0.10.14945
       47             G3D.dll: 3.0.10.14945
       47            sim1.dll: 3.0.10.14945
       47        visualfx.dll: 3.0.10.14945
       47         weather.dll: 3.0.10.14945
       47          window.dll: 3.0.10.14945
       47 ----------------------------------
       47 Trying C:\Program Files\Prepar3D v3\Modules\SimConnectP3D2.dll
       62 Found it: trying to connect
       62 FS path = "C:\Program Files\Prepar3D v3\"
      203 ---------------------- Joystick Device Scan -----------------------
      219 Product= Saitek Pro Flight Quadrant
      219    Manufacturer= Saitek
      219    Vendor=06A3, Product=0C2D (Version 2.1)
      219    Serial Number= Saitek
      219 Product= Pro Flight Cessna Yoke
      219    Manufacturer= Saitek
      219    Vendor=06A3, Product=0BD3 (Version 1.22)
      219    Serial Number= RD008479
      219 Product= Saitek Pro Flight Rudder Pedals
      219    Manufacturer= Saitek
      219    Vendor=06A3, Product=0763 (Version 1.0)
      219    Serial Number= Saitek
      219 Product= Pro Flight Cessna Trim Wheel
      219    Manufacturer= Saitek
      219    Vendor=06A3, Product=0BD4 (Version 1.6)
      219    Serial Number= RD003754
      219 -------------------------------------------------------------------
      234 LogOptions=F0000000 00000011
      234 -------------------------------------------------------------------
      234 ------ Setting the hooks and direct calls into the simulator ------
      234 --- CONTROLS timer memory location obtained ok
      234 --- SIM1 Frictions access gained
      234 --- FS Controls Table located ok
      234 --- Installed Mouse Macro hooks ok.
      234 --- Wind smoothing fix is installed
      234 --- All links okay (except older global weather setting method)
      234 -------------------------------------------------------------------
      234 SimConnect_Open succeeded: waiting to check version okay
      234 Trying to use SimConnect Prepar3D
     8062 Ready Flags: Ready-To-Fly=N, In Menu=N, In Dlg=N
     8078 Running in "Lockheed Martin® Prepar3D® v3", Version: 3.0.3.0 (SimConnect: 3.0.0.0)
     8078 Initialising SimConnect data requests now
     8078 FSUIPC Menu entry added
     8094 Ready Flags: Ready-To-Fly=N, In Menu=Y, In Dlg=Y
     8094 C:\Users\User\Documents\Prepar3D v3 Files\Maule LSZH RWY28.fxml
     8094 C:\Program Files\Prepar3D v3\SimObjects\Airplanes\Maule_M7_260C\Maule_M7_260C.air
     8125 Memory in use: 679Mb, Avail=3417Mb
    68640 Memory in use: 1473Mb, Avail=2623Mb
    83875 Ready Flags: Ready-To-Fly=N, In Menu=N, In Dlg=N
    84281 System time = 08/12/2015 12:37:48, Simulator time = 12:36:27 (11:36Z)
    84281 Aircraft="Maule M7 260C"
    86281 Starting everything now ...
    86281 Ready Flags: Ready-To-Fly=Y, In Menu=N, In Dlg=N
    86406 Ready Flags: Ready-To-Fly=Y, In Menu=Y, In Dlg=Y
    86906 Ready Flags: Ready-To-Fly=Y, In Menu=N, In Dlg=N
    87844 *** EVENT: Cntrl= 66416 (0x00010370), Param= -1 (0xffffffff) PAN_VIEW
    88078 Advanced Weather Interface Enabled
    92844 ***  AXIS: Cntrl= 65765 (0x000100e5), Param= -16384 (0xffffc000) AXIS_THROTTLE_SET
    92844 ***  AXIS: Cntrl= 66291 (0x000102f3), Param= -16384 (0xffffc000) AXIS_PROPELLER_SET
    92844 ***  AXIS: Cntrl= 66292 (0x000102f4), Param= -16384 (0xffffc000) AXIS_MIXTURE_SET
    92844 Button changed: bRef=0, Joy=0, Btn=0, Pressed
    92844 [buttons.Maule M7 260C] 0=P0,0,C0,0
    93078 Button changed: bRef=0, Joy=0, Btn=0, Released
   117515 Button changed: bRef=0, Joy=0, Btn=1, Pressed
   117515 [buttons.Maule M7 260C] 2=P0,1,C65733,0
   117515 FS Control Sent: Ctrl=65733, Param=0
   117515 *** EVENT: Cntrl= 65733 (0x000100c5), Param= 0 (0x00000000) ABORT
   118187 Ready Flags: Ready-To-Fly=Y, In Menu=Y, In Dlg=Y
   118187 Sim stopped: average frame rate for last 31 secs = 29.7 fps
   129500 === NOTE: not calling SimConnect_Close ...
   130500 System time = 08/12/2015 12:38:35, Simulator time
= 12:36:57 (11:36Z)
   130500 *** FSUIPC log file being closed
Minimum frame rate was 27.3 fps, Maximum was 29.9 fps
Minimum available memory recorded was 2131Mb
Average frame rate for running time of 33 secs = 29.5 fps
Memory managed: 19 Allocs, 19 Freed
********* FSUIPC Log file closed ***********

 

 

Hope for your rResponse and regards Roger

Link to comment
Share on other sites

Dear Pete

 

This is my next logging file without weather logging.

 

I deleted Abort within the FSUIPC button controll.

 

Anyway P3D  still Closes when use the left button on the throttle Quadrant.

 

You still have ABORT assigned, look here:

 

   117515 Button changed: bRef=0, Joy=0, Btn=1, Pressed

   117515 [buttons.Maule M7 260C] 2=P0,1,C65733,0

   117515 FS Control Sent: Ctrl=65733, Param=0

   117515 *** EVENT: Cntrl= 65733 (0x000100c5), Param= 0 (0x00000000) ABORT

 

The line in the INI where it is assigned is

 

2=P0,1,C65733,0

 

in the  [buttons.Maule M7 260C]  section.

 

Maybe you assigned it generically and specifically for the Maule? And, anyway, why would you assign ABORT if you didn't want FS to terminate when you press that button?

 

There's another assignment there which is not doing anything useful::

 

 0=P0,0,C0,0

 

Control 0? There isn't one. So that button will do nothing on the Maule. Is that what you intended?

 

Pete

Link to comment
Share on other sites

Pete Thanks for your outstanding Support.

 

I deleted the all the aircraft specific  profiles awithin the FSUIPC.ini and started to apply the main  rudder and button again and I tested and the problem became solved.

 

I was really surprised because several times a made a new install of FSUPIC from the scratch but the problem caused by pressing the left button causing to Close P3D was still going.

Now it Looks perfect.

 

Can you please verifiy my last copy of the logging file and  reponse if there is a wrong sentence.

 

********* FSUIPC4, Version 4.948c by Pete Dowson *********
Prepar3D.exe version = 3.0.10.14945
Reading options from "C:\Program Files\Prepar3D v3\Modules\FSUIPC4.ini"
Running inside Prepar3D v3 on Windows 8.0
Module base=58440000
User Name=""
User Addr=""
FSUIPC4 Key is provided
WIDEFS7 not user registered, or expired
       47 System time = 08/12/2015 16:15:16
       47 FLT path = "C:\Users\User\Documents\Prepar3D v3 Files\"
       47 ------ Module Version Check ------
       47        acontain.dll: 3.0.10.14945
       47             api.dll: 3.0.10.14945
       47        controls.dll: 3.0.10.14945
       47      fs-traffic.dll: 3.0.10.14945
       47             G3D.dll: 3.0.10.14945
       47            sim1.dll: 3.0.10.14945
       47        visualfx.dll: 3.0.10.14945
       47         weather.dll: 3.0.10.14945
       47          window.dll: 3.0.10.14945
       47 ----------------------------------
       47 Trying C:\Program Files\Prepar3D v3\Modules\SimConnectP3D2.dll
       47 Found it: trying to connect
       62 FS path = "C:\Program Files\Prepar3D v3\"
      203 ---------------------- Joystick Device Scan -----------------------
      203 Product= Saitek Pro Flight Quadrant
      203    Manufacturer= Saitek
      203    Vendor=06A3, Product=0C2D (Version 2.1)
      203    Serial Number= Saitek
      219 Product= Pro Flight Cessna Yoke
      219    Manufacturer= Saitek
      219    Vendor=06A3, Product=0BD3 (Version 1.22)
      219    Serial Number= RD008479
      219 Product= Saitek Pro Flight Rudder Pedals
      219    Manufacturer= Saitek
      219    Vendor=06A3, Product=0763 (Version 1.0)
      219    Serial Number= Saitek
      219 Product= Pro Flight Cessna Trim Wheel
      219    Manufacturer= Saitek
      219    Vendor=06A3, Product=0BD4 (Version 1.6)
      219    Serial Number= RD003754
      219 -------------------------------------------------------------------
      234 LogOptions=F0000000 00000011
      234 -------------------------------------------------------------------
      234 ------ Setting the hooks and direct calls into the simulator ------
      234 --- CONTROLS timer memory location obtained ok
      234 --- SIM1 Frictions access gained
      234 --- FS Controls Table located ok
      234 --- Installed Mouse Macro hooks ok.
      234 --- Wind smoothing fix is installed
      234 --- All links okay (except older global weather setting method)
      234 -------------------------------------------------------------------
      234 SimConnect_Open succeeded: waiting to check version okay
      234 Trying to use SimConnect Prepar3D
     8094 Ready Flags: Ready-To-Fly=N, In Menu=N, In Dlg=N
     8094 Running in "Lockheed Martin® Prepar3D® v3", Version: 3.0.3.0 (SimConnect: 3.0.0.0)
     8094 Initialising SimConnect data requests now
     8094 FSUIPC Menu entry added
     8109 Ready Flags: Ready-To-Fly=N, In Menu=Y, In Dlg=Y
     8109 C:\Users\User\Documents\Prepar3D v3 Files\Maule LSZH RWY28.fxml
     8109 C:\Program Files\Prepar3D v3\SimObjects\Airplanes\Maule_M7_260C\Maule_M7_260C.air
     8265 Memory in use: 735Mb, Avail=3361Mb
    68531 Memory in use: 1669Mb, Avail=2427Mb
    71640 Ready Flags: Ready-To-Fly=N, In Menu=N, In Dlg=N
    72609 System time = 08/12/2015 16:16:29, Simulator time = 16:15:19 (15:15Z)
    72609 Aircraft="Maule M7 260C"
    76984 Ready Flags: Ready-To-Fly=N, In Menu=Y, In Dlg=Y
    77703 Ready Flags: Ready-To-Fly=N, In Menu=N, In Dlg=N
    80515 Starting everything now ...
    80562 Ready Flags: Ready-To-Fly=Y, In Menu=N, In Dlg=N
    81875 Advanced Weather Interface Enabled
    87078 *** EVENT: Cntrl= 65758 (0x000100de), Param= 0 (0x00000000) FLAPS_INCR
    87109 ***  AXIS: Cntrl= 65765 (0x000100e5), Param= -16384 (0xffffc000) AXIS_THROTTLE_SET
    87125 ***  AXIS: Cntrl= 66291 (0x000102f3), Param= -16384 (0xffffc000) AXIS_PROPELLER_SET
    87125 ***  AXIS: Cntrl= 66292 (0x000102f4), Param= -16384 (0xffffc000) AXIS_MIXTURE_SET
    90625 *** EVENT: Cntrl= 66416 (0x00010370), Param= -1 (0xffffffff) PAN_VIEW
    91078 *** EVENT: Cntrl= 65567 (0x0001001f), Param= 0 (0x00000000) VIEW_MODE
    94578 *** EVENT: Cntrl= 65759 (0x000100df), Param= 0 (0x00000000) FLAPS_DECR
    95672 *** EVENT: Cntrl= 65759 (0x000100df), Param= 0 (0x00000000) FLAPS_DECR
    96781 *** EVENT: Cntrl= 65759 (0x000100df), Param= 0 (0x00000000) FLAPS_DECR
   106437 *** EVENT: Cntrl= 65732 (0x000100c4), Param= 0 (0x00000000) EXIT
   107078 Ready Flags: Ready-To-Fly=Y, In Menu=Y, In Dlg=Y

   107078 Sim stopped: average frame rate for last 29 secs = 29.0 fps
   115781 === NOTE: not calling SimConnect_Close ...
   116781 System time = 08/12/2015 16:17:13, Simulator time = 16:15:47 (15:15Z)
   116781 *** FSUIPC log file being closed
Minimum frame rate was 27.8 fps, Maximum was 29.9 fps
Minimum available memory recorded was 2110Mb
Average frame rate for running time of 34 secs = 26.5 fps
Memory managed: 16 Allocs, 16 Freed
********* FSUIPC Log file closed ***********

 

Again thanks and regards Roger
 

Link to comment
Share on other sites

I was really surprised because several times a made a new install of FSUPIC from the scratch but the problem caused by pressing the left button causing to Close P3D was still going.

 

Reinstalling FSUIPC never deletes or changes any of your settings. I'd be in lots of trouble if that happened -- folks spend hours getting their stuff just right! To install from scratch you would need to delete all files in the Modules folder, or the whole folder itself.

 

Can you please verifiy my last copy of the logging file and  reponse if there is a wrong sentence.

 

 

Looks okay. You may want to go into the Logging tab next time and turn off the logging options you no longer need.

 

Pete

Link to comment
Share on other sites

Dear

 

Thanks for immediate response.

 

I just can confirm that I have never overwritten the FSUPIC installation with a re-install. I really deleted the modul folder first the be empty  . Due to the newly installed P3D Version 3.0 at that time the modul folder contained only the FSUPIC installation.

I have already turned off the logging tab.

 

Anyway have many thank to push me to observe und to send you the logging file which I had  only recognised due to your high expert knowledge.

 

regards Roger

Link to comment
Share on other sites

I just can confirm that I have never overwritten the FSUPIC installation with a re-install. I really deleted the modul folder first the be empty 

 

Well, it is magic then, because FSUIPC can only ever get those assignments from an existing settings file, and only in the Modules folder.

 

Pete

Link to comment
Share on other sites

Looks like the problem I had has disappeared (I hope).

 

Only thing I changed was I installed a 10 port usb device to replace a 6 port unit and a 4 port unit that I had daisy chained together.

Not sure if it had anything to do with it. 

 

Thanks for all your help.

 

All the best to you.

 

Lance

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use. Guidelines Privacy Policy We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.