Jump to content
The simFlight Network Forums
Sign in to follow this  
tekrc

Problem with buttons not saving

Recommended Posts

Hello, I have been trying to follow the manual in the Aerosoft F-14 for assigning button functions, but the changes do not appear to save. I make a change and hit ok, looking in the ini file the new button assignments do not appear nor do they function in the sim. running latest version from the site. using P3d v3 and v2. same issue in both. I did see another thread but his issue was solved on re install. mine was not

Share this post


Link to post
Share on other sites

Sorry, you don't provide enough information. Maybe a log file and you settings (FSUIPC4.LOG and FSUIPC4.INI, from the Modules folder). You can paste their contents into a message here.

Pete

 

Share this post


Link to post
Share on other sites

INI: 

 

[General]
UpdatedByVersion=4955c
History=06OV9CZ5K7E5RYS9O4XI6
InitDelayDevicesToo=No
Annotate=Yes
NewInterceptTextMenu=No
UseSystemTime=No
UseMidMouseBtn=Yes
MouseWheelMove=No
MouseWheelTrim=No
MouseWheelTrimSpeed=1
JoystickTimeout=20
PollGFTQ6=Yes
BlankDisplays=No
FixControlAccel=No
FixMachSpeedBug=No
NewDeleteVehiclesForAES=No
AutoScanDevices=Yes
AssignJoystickIDs=Yes
VisibilityOptions=No
OneCloudLayer=No
CloudTurbulence=No
CloudIcing=No
GenerateCirrus=No
SuppressCloudTurbulence=No
MaxIce=-4
MinIce=-4
UpperWindGusts=No
SuppressWindTurbulence=No
SuppressWindVariance=No
WindTurbulence=No
TurbulenceRate=1.0,5.0
TurbulenceDivisor=20,20,40,40
SuppressAllGusts=No
MaxSurfaceWind=0
WindLimitLevel=200
WindDiscardLevel=400
WindAjustAltitude=No
WindAjustAltitudeBy=2000
SmoothBySimTime=No
WindSmoothing=No
WindSmoothness=2
WindSmoothAirborneOnly=Yes
PressureSmoothness=0
TemperatureSmoothness=0
DisconnTrimForAP=No
ZeroElevForAPAlt=No
ThrottleSyncAll=No
WhiteMessages=No
ShowPMcontrols=No
SpoilerIncrement=512
MagicBattery=No
RudderSpikeRemoval=No
ElevatorSpikeRemoval=No
AileronSpikeRemoval=No
ReversedElevatorTrim=No
ClockSync=No
ClockSyncMins=5
ClearWeatherDynamics=No
OwnWeatherChanges=No
TimeForSelect=4
LoadFlightMenu=No
LoadPlanMenu=No
PauseAfterCrash=No
BrakeReleaseThreshold=75
SaveDataWithFlights=No
ZapSound=firework
ShortAircraftNameOk=Substring
UseProfiles=Yes
EnableMouseLook=No
DelayedMouseLookZoom=No
AxesWrongRange=No
TCASid=Flight
TCASrange=40
AxisCalibration=No
DirectAxesToCalibs=No
ShowMultilineWindow=Yes
SuppressSingleline=No
SuppressMultilineFS=No
AxisIntercepts=No
DontResetAxes=No
InitDelay=0
GetNearestAirports=No
LogOptionProtect=Yes
OOMcheck=Yes
OOMcheckInterval=10
WeatherReadFactor=2
WeatherRewriteSeconds=1
CustomWeatherModify=No
SimConnectStallTime=1
InitialStallTime=10
NormalStallTime=1
LuaRerunDelay=66
Console=No
FSVersionUsed="Lockheed Martin® Prepar3D® v3",3.3.3.3
SimConnectUsed=3.3.0.0

[JoyNames]
AutoAssignLetters=No
0=MFG Crosswind V2
0.GUID={30DFFEC0-1BDC-11E6-8005-444553540000}
1=Joystick - HOTAS Warthog
1.GUID={2D4A54E0-1BDC-11E6-8002-444553540000}
2=Throttle - HOTAS Warthog
2.GUID={2D9DCC10-1BDC-11E6-8004-444553540000}
3=F16 MFD 1
3.GUID={50C06DA0-1BCE-11E6-8001-444553540000}

[Axes]
PollInterval=10
RangeRepeatRate=10

[Buttons]
PollInterval=25
ButtonRepeat=20,10
1=P2,29,C3,10     -{Custom control: <3>}-

[AutoSave]
Next=1
Interval=60
Files=10
SaveOnGround=No
AutoSaveEnabled=No

[GPSout]
GPSoutEnabled=No

[GPSout2]
GPSoutEnabled=No

[WideServer]
WideFSenabled=Yes

[Sounds]
Path=G:\Prepar3D v3\Sound\
Device1=Primary Sound Driver
Device2=Headphones (2- Astro MixAmp Pro Game)
Device3=Speakers (Sound Blaster Recon3Di)
Device4=Headphones (Rift Audio)
Device5=ASUS VS228-0 (NVIDIA High Definition Audio)
Device6=SPDIF-Out (Sound Blaster Recon3Di)
Device7=Headset Earphone (2- Astro MixAmp Pro Voice)

[Profile.2 engine]
1=MJC8Q400_CJC
2=PMDG 737-700NGX PMDG House Winglets
3=PMDG 777-300ER PMDG House
4=Boeing 737-7H4NGX Southwest Airlines Winglets
5=PMDG 777-222LR United Airlines (Merger - Fictional)
6=VFA-27 "Royal Maces" Line

[JoystickCalibration]
AllowSuppressForPFCquad=Yes
ExcludeThrottleSet=Yes
ExcludeMixtureSet=Yes
ExcludePropPitchSet=Yes
SepRevsJetsOnly=No
ApplyHeloTrim=No
UseAxisControlsForNRZ=No
FlapsSetControl=0
FlapDetents=No
ReverserControl=66292
Reverser1Control=66422
Reverser2Control=66425
Reverser3Control=66428
Reverser4Control=66431
MaxThrottleForReverser=256
AileronTrimControl=66731
RudderTrimControl=66732
CowlFlaps1Control=66162
CowlFlaps2Control=66163
CowlFlaps3Control=66164
CowlFlaps4Control=66165
SteeringTillerControl=0
MaxSteerSpeed=60
LeftBrake=-16384,15839
RightBrake=-16384,11159

[Axes.2 engine]
RangeRepeatRate=10
0=0R,256,D,3,0,0,0    -{ DIRECT: Rudder }-
1=1X,256,D,1,0,0,0    -{ DIRECT: Aileron }-
2=1Y,256,D,2,0,0,0    -{ DIRECT: Elevator }-
3=2Z,256,D,10,0,0,0    -{ DIRECT: Throttle2 }-
4=2R,256,D,9,0,0,0    -{ DIRECT: Throttle1 }-

[Profile.1 Enging]
1=C172R default
2=North American T-6 Texan N584M

[Axes.1 Enging]
RangeRepeatRate=10
0=2Z,256,D,9,0,0,0    -{ DIRECT: Throttle1 }-
1=2R,256,D,17,0,0,0    -{ DIRECT: PropPitch1 }-
2=2S,256,D,6,0,0,0    -{ DIRECT: Mixture }-

[Profile.4 engine]
1=Boeing Stratocruiser, NWA

[Axes.4 engine]
RangeRepeatRate=10
0=2Z,256,D,11,12,0,0    -{ DIRECT: Throttle3, Throttle4 }-
1=2R,256,D,9,10,0,0    -{ DIRECT: Throttle1, Throttle2 }-

[LuaFiles]

1=Aerosoft_F14AB

[Profile.F 14]
1=F14 A Tomcat VF-114 1977

[Axes.F 14]
RangeRepeatRate=10
0=0R,256,D,3,0,0,0    -{ DIRECT: Rudder }-
1=1X,256,D,1,0,0,0    -{ DIRECT: Aileron }-
2=1Y,256,D,2,0,0,0    -{ DIRECT: Elevator }-
3=2Z,256,D,10,0,0,0    -{ DIRECT: Throttle2 }-
4=2R,256,D,9,0,0,0    -{ DIRECT: Throttle1 }-

[Buttons.F 14]
0=P2,16,C0,222     -{Custom control: <0>}-

[JoystickCalibration.F 14]
AllowSuppressForPFCquad=Yes
ExcludeThrottleSet=Yes
ExcludeMixtureSet=Yes
ExcludePropPitchSet=Yes
SepRevsJetsOnly=No
ApplyHeloTrim=No
UseAxisControlsForNRZ=No
FlapsSetControl=0
FlapDetents=No
ReverserControl=66292
Reverser1Control=66422
Reverser2Control=66425
Reverser3Control=66428
Reverser4Control=66431
MaxThrottleForReverser=256
AileronTrimControl=66731
RudderTrimControl=66732
CowlFlaps1Control=66162
CowlFlaps2Control=66163
CowlFlaps3Control=66164
CowlFlaps4Control=66165
SteeringTillerControl=0
MaxSteerSpeed=60
LeftBrake=-16384,15839
RightBrake=-16384,11159
Throttle1=-16266,-512,512,16165/32
Throttle2=-16324,-512,512,16227/32
[Profile.F18]
1=VFA-27 "Royal Maces" CAG
[Axes.F18]
RangeRepeatRate=10
0=0R,256,D,3,0,0,0    -{ DIRECT: Rudder }-
1=1X,256,D,1,0,0,0    -{ DIRECT: Aileron }-
2=1Y,256,D,2,0,0,0    -{ DIRECT: Elevator }-
3=2Z,256,D,10,0,0,0    -{ DIRECT: Throttle2 }-
4=2R,256,D,9,0,0,0    -{ DIRECT: Throttle1 }-




Log:


********* FSUIPC4, Version 4.955c (14th June 2016) by Pete Dowson *********
Windows version reported as 6.2.?.9200
Prepar3D.exe version = 3.3.17625.17625
Reading options from "G:\Prepar3D v3\Modules\FSUIPC4.ini"
Running inside Prepar3D v3 on Windows 8.0 or later
Module base=254D0000
User Name="Robert Caldwell"
User Addr="furrycoon@gmail.com"
FSUIPC4 Key is provided
WIDEFS7 not user registered, or expired
      171 System time = 17/09/2016 16:42:50
      171 FLT path = "C:\Users\Tek\Documents\Prepar3D v3 Files\"
      171 ------ Module Version Check ------
      171        acontain.dll: 3.3.5.17625
      171             api.dll: 3.3.5.17625
      171        controls.dll: 3.3.5.17625
      171      fs-traffic.dll: 3.3.5.17625
      171             G3D.dll: 3.3.5.17625
      171        language.dll: 3.3.5.17625
      171            sim1.dll: 3.3.5.17625
      171        visualfx.dll: 3.3.5.17625
      171         weather.dll: 3.3.5.17625
      171          window.dll: 3.3.5.17625
      171 ----------------------------------
      171 Trying G:\Prepar3D v3\Modules\SimConnectP3D3.dll
      171 Found it: trying to connect
      187 FS path = "G:\Prepar3D v3\"
      281 ---------------------- Joystick Device Scan -----------------------
      281 Product= Joystick - HOTAS Warthog
      281    Manufacturer= Thustmaster
      281    Vendor=044F, Product=0402 (Version 1.0)
      281    Serial Number= Thustmaster
      281 Product= Throttle - HOTAS Warthog
      281    Manufacturer= Thrustmaster
      281    Vendor=044F, Product=0404 (Version 1.0)
      281    Serial Number= Thrustmaster
      281 Product= MFG Crosswind V2
      281    Manufacturer= MFG
      281    Vendor=16D0, Product=0A38 (Version 33.1)
      281    Serial Number= MFG500001
      281 -------------------------------------------------------------------
      296 LogOptions=00000000 00000001
      296 -------------------------------------------------------------------
      296 ------ Setting the hooks and direct calls into the simulator ------
      296 --- CONTROLS timer memory location obtained ok
      296 --- SIM1 Frictions access gained
      296 --- FS Controls Table located ok
      296 --- Installed Mouse Macro hooks ok.
      296 --- Wind smoothing fix is installed
      296 --- All links okay (except older global weather setting method)
      296 -------------------------------------------------------------------
      296 SimConnect_Open succeeded: waiting to check version okay
      296 Trying to use SimConnect Prepar3D
     4343 Running in "Lockheed Martin® Prepar3D® v3", Version: 3.3.3.3 (SimConnect: 3.3.0.0)
     4343 Initialising SimConnect data requests now
     4343 FSUIPC Menu entry added
     4359 C:\Users\Tek\AppData\Local\Lockheed Martin\Prepar3D v3\Prepar3D_Default.fxml
     4359 G:\Prepar3D v3\SimObjects\Airplanes\IRIS Raptor Driver\Raptor.air
    36359 Weather Mode now = Custom
    38218 G:\Prepar3D v3\SimObjects\Airplanes\Aerosoft F14A Pre86\Aerosoft F-14A P3D.air
    38218 C:\Users\Tek\Documents\Prepar3D v3 Files\F-14A Persian Gulf (C&D).flt
    56531 System time = 17/09/2016 16:43:46, Simulator time = 09:40:26 (06:40Z)
    56531 Aircraft="F14 A Tomcat VF-114 1977"
    57515 Starting everything now ...
    57578 ASN active function link set
    57578 Ready for ASN WX radar
    58687 Advanced Weather Interface Enabled
    62843 Weather Mode now = Theme
    76484 G:\Prepar3D v3\SimObjects\Airplanes\VRS_FA-18E\FA-18E-6.8_SE.air
    77062 Aircraft="VFA-27 "Royal Maces" CAG"
   114453 Sim stopped: average frame rate for last 36 secs = 19.7 fps
   114453              Max AI traffic was 5 aircraft
   139328 Aircraft="MJC8Q400_CJC"
   139343 Aircraft="VFA-27 "Royal Maces" CAG"
   189125 Sim stopped: average frame rate for last 42 secs = 19.8 fps
   189125              Max AI traffic was 0 aircraft
   225140 Sim stopped: average frame rate for last 20 secs = 19.8 fps
   225140              Max AI traffic was 0 aircraft
   314093 Sim stopped: average frame rate for last 67 secs = 19.8 fps
   314093              Max AI traffic was 0 aircraft
  1873406 Sim stopped: average frame rate for last 1524 secs = 19.8 fps
  1873406              Max AI traffic was 5 aircraft
  2506906 Sim stopped: average frame rate for last 617 secs = 19.8 fps
  2506906              Max AI traffic was 0 aircraft
 

Share this post


Link to post
Share on other sites
On 9/17/2016 at 7:37 PM, tekrc said:

I make a change and hit ok, looking in the ini file the new button assignments do not appear nor do they function in the sim

There are two button assignments, one which aplies to all aircraft (i.e. not specific to a Profile):

2 hours ago, tekrc said:

1=P2,29,C3,10     -{Custom control: <3>}-

This control number is not valid. not sure why you selected <custom control> in the drop-down list and then entered "3". There's really no possibility of that being a valid control.

The other is specific to the F14

2 hours ago, tekrc said:

0=P2,16,C0,222     -{Custom control: <0>}-

and again it isn't valid, for the same reason!

Both of these buttons are on the throttle device.

I think you'd better explain what you are doing, step-by-step, because what you've done makes no sense. And no way will FSUIPC simply lose assignments -- they are saved in the INI file as soon as you press "OK" (but not if you press Cancel or Escape, of course).

Note that with buttons and keys (not axes) general assignments apply also to profiles unless overridden. You select between them using the Profile checkbox on the Buttons tab.

You can also use Button/Key logging to check your actions. See the Logging tab.

Pete

 

 

Share this post


Link to post
Share on other sites
Quote

This control number is not valid. not sure why you selected <custom control> in the drop-down list and then entered "3". There's really no possibility of that being a valid control.

I dont know what the custom control setting is from. never set 3 for anything. Im trying to assign lua functions for the f14 to buttons on my throttle. so all I did was go into fsuipc, set axes, save as profile, went to buttons and switches, select fs for control checked, press button on throttle, (in this case button 16) I check profile specific and select for FS control, enter parameter 222 (ifr probe toggle for the f14) and hit ok. when sim comes back and I use button 16 nothing happens. open fsuipc again to find it didnt save anything I just did. back to no assignment to the button, profile and select for fs control unchecked.

Edited by tekrc

Share this post


Link to post
Share on other sites

heres the log with the key and buttons enabled. 

 

  1181390 Button changed: bRef=0, Joy=2, Btn=16, Released
  1181890 Button changed: bRef=0, Joy=2, Btn=16, Pressed
  1181890 [Buttons.F14 A Tomcat VF-114 1977] 0=P2,16,C0,222
  1182187 Button changed: bRef=0, Joy=2, Btn=16, Released
  1182594 Button changed: bRef=0, Joy=2, Btn=16, Pressed
  1182594 [Buttons.F14 A Tomcat VF-114 1977] 0=P2,16,C0,222
  1183000 Button changed: bRef=0, Joy=2, Btn=16, Released
  1186297 Sim stopped: average frame rate for last 70 secs = 19.7 fps
  1186297              Max AI traffic was 0 aircraft
  1187469 *** Entered Buttons option page ***
  1187469 FirstButtonChange res=00000102 (0.1, 2)
  1189344 FirstButtonChange res=00000210 (0.2, 16)
  1195406 *** Exiting Buttons option page ***
  1196109 Button changed: bRef=0, Joy=2, Btn=16, Pressed
  1196109 [Buttons.F14 A Tomcat VF-114 1977] 0=P2,16,C0,222
  1196469 Button changed: bRef=0, Joy=2, Btn=16, Released
  1196656 Button changed: bRef=0, Joy=2, Btn=16, Pressed
  1196656 [Buttons.F14 A Tomcat VF-114 1977] 0=P2,16,C0,222
  1196859 Button changed: bRef=0, Joy=2, Btn=16, Released
  1197062 Button changed: bRef=0, Joy=2, Btn=16, Pressed
  1197062 [Buttons.F14 A Tomcat VF-114 1977] 0=P2,16,C0,222
  1197265 Button changed: bRef=0, Joy=2, Btn=16, Released
  1197422 Button changed: bRef=0, Joy=2, Btn=16, Pressed
  1197422 [Buttons.F14 A Tomcat VF-114 1977] 0=P2,16,C0,222
  1197515 Button changed: bRef=0, Joy=2, Btn=16, Released
  1199031 KEYDOWN: VK=189, Waiting=0, Repeat=N, Shifts=0
  1199031 .. Key not programmed -- passed on to FS
  1199140 KEYUP: VK=189, Waiting=0
  1199187 KEYDOWN: VK=189, Waiting=0, Repeat=N, Shifts=0
  1199187 .. Key not programmed -- passed on to FS
  1199281 KEYUP: VK=189, Waiting=0
  1199390 KEYDOWN: VK=189, Waiting=0, Repeat=N, Shifts=0
  1199390 .. Key not programmed -- passed on to FS
  1199437 KEYUP: VK=189, Waiting=0
  1199547 KEYDOWN: VK=189, Waiting=0, Repeat=N, Shifts=0
  1199547 .. Key not programmed -- passed on to FS
  1199594 KEYUP: VK=189, Waiting=0
  1199687 KEYDOWN: VK=189, Waiting=0, Repeat=N, Shifts=0
  1199687 .. Key not programmed -- passed on to FS
  1199750 KEYUP: VK=189, Waiting=0
  1205453 KEYDOWN: VK=187, Waiting=0, Repeat=N, Shifts=0
  1205453 .. Key not programmed -- passed on to FS
  1205547 KEYUP: VK=187, Waiting=0
  1205656 KEYDOWN: VK=187, Waiting=0, Repeat=N, Shifts=0
  1205656 .. Key not programmed -- passed on to FS
  1205703 KEYUP: VK=187, Waiting=0
  1205812 KEYDOWN: VK=187, Waiting=0, Repeat=N, Shifts=0
  1205812 .. Key not programmed -- passed on to FS
  1205906 KEYUP: VK=187, Waiting=0
  1206000 KEYDOWN: VK=187, Waiting=0, Repeat=N, Shifts=0
  1206000 .. Key not programmed -- passed on to FS
  1206062 KEYUP: VK=187, Waiting=0
  1206156 KEYDOWN: VK=187, Waiting=0, Repeat=N, Shifts=0
  1206156 .. Key not programmed -- passed on to FS
  1206265 KEYUP: VK=187, Waiting=0
  1214797 KEYDOWN: VK=189, Waiting=0, Repeat=N, Shifts=0
  1214797 .. Key not programmed -- passed on to FS
  1214906 KEYUP: VK=189, Waiting=0
  1215812 KEYDOWN: VK=189, Waiting=0, Repeat=N, Shifts=0
  1215812 .. Key not programmed -- passed on to FS
  1215906 KEYUP: VK=189, Waiting=0
  1220250 Button changed: bRef=0, Joy=2, Btn=16, Pressed
  1220250 [Buttons.F14 A Tomcat VF-114 1977] 0=P2,16,C0,222
  1220703 Button changed: bRef=0, Joy=2, Btn=16, Released
  1241719 Button changed: bRef=0, Joy=2, Btn=16, Pressed
  1241719 [Buttons.F14 A Tomcat VF-114 1977] 0=P2,16,C0,222
  1242015 Button changed: bRef=0, Joy=2, Btn=16, Released
  1242375 Button changed: bRef=0, Joy=2, Btn=16, Pressed
  1242375 [Buttons.F14 A Tomcat VF-114 1977] 0=P2,16,C0,222
  1242672 Button changed: bRef=0, Joy=2, Btn=16, Released
  1244203 KEYDOWN: VK=189, Waiting=0, Repeat=N, Shifts=0
  1244203 .. Key not programmed -- passed on to FS
  1244297 KEYUP: VK=189, Waiting=0
  1244390 KEYDOWN: VK=189, Waiting=0, Repeat=N, Shifts=0
  1244390 .. Key not programmed -- passed on to FS
  1244500 KEYUP: VK=189, Waiting=0
  1244547 KEYDOWN: VK=189, Waiting=0, Repeat=N, Shifts=0
  1244547 .. Key not programmed -- passed on to FS
  1244703 KEYUP: VK=189, Waiting=0
  1252890 Button changed: bRef=0, Joy=2, Btn=16, Pressed
  1252890 [Buttons.F14 A Tomcat VF-114 1977] 0=P2,16,C0,222
  1253344 Button changed: bRef=0, Joy=2, Btn=16, Released
  1253812 Button changed: bRef=0, Joy=2, Btn=16, Pressed
  1253812 [Buttons.F14 A Tomcat VF-114 1977] 0=P2,16,C0,222
  1254109 Button changed: bRef=0, Joy=2, Btn=16, Released
  1258672 Sim stopped: average frame rate for last 63 secs = 19.8 fps
  1258672              Max AI traffic was 0 aircraft
  1261297 *** Entered Buttons option page ***
  1261297 FirstButtonChange res=00000102 (0.1, 2)
  1263265 FirstButtonChange res=00000210 (0.2, 16)
  1270547 *** Exiting Buttons option page ***
  1271390 Button changed: bRef=0, Joy=2, Btn=16, Released
  1271797 Button changed: bRef=0, Joy=2, Btn=16, Pressed
  1271797 [Buttons.F14 A Tomcat VF-114 1977] 0=P2,16,C0,222
  1272094 Button changed: bRef=0, Joy=2, Btn=16, Released
  1272406 Button changed: bRef=0, Joy=2, Btn=16, Pressed
  1272406 [Buttons.F14 A Tomcat VF-114 1977] 0=P2,16,C0,222
  1272703 Button changed: bRef=0, Joy=2, Btn=16, Released
  1272906 Button changed: bRef=0, Joy=2, Btn=16, Pressed
  1272906 [Buttons.F14 A Tomcat VF-114 1977] 0=P2,16,C0,222
  1273109 Button changed: bRef=0, Joy=2, Btn=16, Released
  1273265 Button changed: bRef=0, Joy=2, Btn=16, Pressed
  1273265 [Buttons.F14 A Tomcat VF-114 1977] 0=P2,16,C0,222
  1273406 Button changed: bRef=0, Joy=2, Btn=16, Released
  1273969 Button changed: bRef=0, Joy=2, Btn=16, Pressed
  1273969 [Buttons.F14 A Tomcat VF-114 1977] 0=P2,16,C0,222
  1275531 Button changed: bRef=0, Joy=2, Btn=16, Released
  1287094 LogOptions changed, now 00000000 00000001



side note but it was working ok right up until a sim restart couple hours after I set it up the first time. now it wont keep the settings at all.

Share this post


Link to post
Share on other sites
5 hours ago, tekrc said:

went to buttons and switches, select fs for control checked, press button on throttle, (in this case button 16) I check profile specific and select for FS control, enter parameter 222 (ifr probe toggle for the f14) and hit ok.

Er, parameter 222 for which control? There's no "control" called "222". You need to assign to a control -- there's a drop-down list! They are all named, NOT numbered! See the drop-down list, which is in alphabetical order.

Practice with a normal default aircraft first. I've no idea what your F4 is doing, but it can't use controls like "222"! Nor control 0 as you assigned here:

5 hours ago, tekrc said:

[Buttons.F14 A Tomcat VF-114 1977] 0=P2,16,C0,222

You assigned control 0 (non-existent) with parameter 222! That simply is nonsense. Sorry.

Here you contradict the above:

5 hours ago, tekrc said:

Im trying to assign lua functions for the f14 to buttons on my throttle

Lua assignments all start with "Lua <name of lua file>", in the drop down list.

Pete

 

 

Share this post


Link to post
Share on other sites
Quote

Lua assignments all start with "Lua <name of lua file>", in the drop down list.

ok that was the issue. manual wasnt very clear there. 

Share this post


Link to post
Share on other sites
4 hours ago, tekrc said:

k that was the issue. manual wasnt very clear there. 

Sorry, which manual? The only ones about Lua at all are the Lua documents in the separate package. The Lua support is an add-on extra with FSUIPC, it is not covered at all in the main User guide,

And in any case, how did you think FSUIPC knew what you meant? How would it identify your Lua program? Did it never strike you as odd assigning to nothing but a parameter? No control name, nothing?

Pete

 

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
Sign in to follow this  

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use. Guidelines Privacy Policy We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.