m4dsurg3on 0 Posted March 1, 2018 Report Share Posted March 1, 2018 I did a clean install of the latest FSUIPC 5.124 but there's something strange going on. I load up the PMDG 737 at FlyTampa EHAM (gate D47) and once the scenery is done loading, just as the plane systems start loading from 20 sec (I think), it get's interrupted. If I call up the FSUIPC menu from the Add-ons, it opens but with a few seconds delay. As soon as I close the FSUIPC menu, P3D crashes instantly. I went one step further and disabled every .dll and .exe entry in the .xml in order to reproduce the cause and the only thing that, once it's disabled didn't cause any issues with the same or different scenario is the FSUIPC5.dll in the dll.xml entry. Plane loads completely, views can be changed in ChasePlane etc. I'm not saying that the FSUIPC is the main cause but something is definitely interfering with the FSUIPC module and I can't find what it is. I have already zipped the FSUIPC5.log and I can upload it here if needed. Cheers, Sanjin Quote Link to post Share on other sites
Pete Dowson 281 Posted March 1, 2018 Report Share Posted March 1, 2018 49 minutes ago, m4dsurg3on said: I'm not saying that the FSUIPC is the main cause but something is definitely interfering with the FSUIPC module and I can't find what it is. What was the previous version of FSUIPC5 you were using, with the PMDG aircraft? Have you tried doing things without loading the PMDG aircraft? Is your PMDG aircraft fully updated? There was a problem with earlier versions, calling a facility in FSUIPC (if it is loaded) in the wrong way (32-but method) which was fixed. What do you mean by "just as the plane systems start loading from 20 sec (I think), it get's interrupted."? Possibly that's where it gets to the point where it calls FSUIPC in the unfixed version. Pete Quote Link to post Share on other sites
m4dsurg3on 0 Posted March 1, 2018 Author Report Share Posted March 1, 2018 I was using the .123e version. Yes, the same thing happens with other planes as well, even with the default F22. All my PMDG planes are up to date. For example, there is a 20 seconds timer where the PMDG plane needs to load all its systems. As soon as the green bar shows up with that 20 seconds timer, it disappears instantly. After that, calling up the FSUIPC menu and exiting is causing P3D to crash. Quote Link to post Share on other sites
Pete Dowson 281 Posted March 1, 2018 Report Share Posted March 1, 2018 2 hours ago, m4dsurg3on said: I was using the .123e version. Well, there's very little difference to 5.124. But can you try adding this line to the [General] section of the FSUIPC5.INI file: UsePDK=No That will make 5.124 the same as 123e, at the cost of a heavier load on SimConnect (which really should affect add-ons like the PMDG aircraft more). 2 hours ago, m4dsurg3on said: After that, calling up the FSUIPC menu and exiting is causing P3D to crash. There's no change in FSUIPC for the Options dialogue -- all that is purely a Simconnect function, plus standard Windows dialogue stuff. Pete Quote Link to post Share on other sites
FireRx 0 Posted March 1, 2018 Report Share Posted March 1, 2018 Pete, What exact build should I be downloading for Prepar3D v4.2? Thanks you sir. Quote Link to post Share on other sites
Thomas Richter 31 Posted March 1, 2018 Report Share Posted March 1, 2018 Hi, FSUIPC5.124 and then insert into the [General] section of the FSUIPC5.ini file UsePDK=No , as Pete said. Thomas Quote Link to post Share on other sites
FireRx 0 Posted March 1, 2018 Report Share Posted March 1, 2018 all I see on the DL is 5.123 :( Quote Link to post Share on other sites
m4dsurg3on 0 Posted March 1, 2018 Author Report Share Posted March 1, 2018 1 hour ago, Pete Dowson said: Well, there's very little difference to 5.124. But can you try adding this line to the [General] section of the FSUIPC5.INI file: UsePDK=No That will make 5.124 the same as 123e, at the cost of a heavier load on SimConnect (which really should affect add-ons like the PMDG aircraft more). There's no change in FSUIPC for the Options dialogue -- all that is purely a Simconnect function, plus standard Windows dialogue stuff. Pete I've decided to run the Delete Generated Files within the Prepar3D folder in order to revert everything to its default state. For some reason that did the trick even though I have restored all my previous add-ons. Something somewhere got corrupted which was causing the FSUIPC not to perform as usual. It's all good now. Thanks, Pete and this can now be marked as resolved. Cheers, Sanjin Quote Link to post Share on other sites
Thomas Richter 31 Posted March 1, 2018 Report Share Posted March 1, 2018 Hi, it shows correct 5.124. May be it didn't install correct. You will also find the used version in the FSUIPC5.log file and on top of the FSUIPC5.ini file. Thomas Quote Link to post Share on other sites
FireRx 0 Posted March 1, 2018 Report Share Posted March 1, 2018 yeah "I'm still on 5.122 for that reason. when I tried the new one my sim went wonky. Quote Link to post Share on other sites
m4dsurg3on 0 Posted March 1, 2018 Author Report Share Posted March 1, 2018 I think he means on http://www.schiratti.com/dowson as it shows the .123 when it's actually the .124 version. Quote Link to post Share on other sites
FireRx 0 Posted March 1, 2018 Report Share Posted March 1, 2018 is the better to get the DL from Simmarket or from here? Quote Link to post Share on other sites
FireRx 0 Posted March 1, 2018 Report Share Posted March 1, 2018 Just now, m4dsurg3on said: I think he means on http://www.schiratti.com/dowson as it shows the .123 when it's actually the .124 version. yeah, that's what I was asking :) Quote Link to post Share on other sites
m4dsurg3on 0 Posted March 1, 2018 Author Report Share Posted March 1, 2018 You should always check the Quote Link to post Share on other sites
Thomas Richter 31 Posted March 1, 2018 Report Share Posted March 1, 2018 Hi, for latest files the best place is here in this Forum above Download Links Thomas Quote Link to post Share on other sites
FireRx 0 Posted March 1, 2018 Report Share Posted March 1, 2018 Thanks sir :) Quote Link to post Share on other sites
Pete Dowson 281 Posted March 1, 2018 Report Share Posted March 1, 2018 5 hours ago, m4dsurg3on said: I think he means on http://www.schiratti.com/dowson as it shows the .123 when it's actually the .124 version. There's always a delay on the Schiratti updates, but the link points to the same download as the one here. 5 hours ago, Thomas Richter said: for latest files the best place is here in this Forum above Download Links The advantage of that route is that you can see if there are any interim updates which might fix your problem. But the full install will always be the same as on the Schiratti site -- only the text on the latter isn't alwas updated very quickly. Pete Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.