FeelThere Ariel Posted August 7, 2018 Report Share Posted August 7, 2018 Yes, it does. Please show us a screenshot of the KLAS folder. Link to comment Share on other sites More sharing options...
winsaudi Posted August 7, 2018 Report Share Posted August 7, 2018 4 hours ago, Peabody said: I admit I am no expert on this but the logfile loaded the Janet terminal, wouldn't that indicate he has the new version loaded correctly? "Add terminal: Terminal_Janet - WWW" @Peabody @FeelThere Ariel I am not sure that it does. I may be completely wrong but isn't that line triggered by the klas_terminal.txt file which is a result of Real Traffic not T3D? That line does not convince me that the KLAS @nrholland is loading is actually the latest version. Perhaps his/her installation of KLAS_for_Tower3D_SP3 went to the wrong folder and an older version is being used when he/she starts T3D? We all know that a lot of the posts on this forum are resolved when the correct installation route is explained. Where is T3D's forensic detective when you need him? Time to shine the @crbascott signal onto some clouds. 🙂 Link to comment Share on other sites More sharing options...
crbascott Posted August 7, 2018 Report Share Posted August 7, 2018 3 hours ago, winsaudi said: @Peabody @FeelThere Ariel I am not sure that it does. I may be completely wrong but isn't that line triggered by the klas_terminal.txt file which is a result of Real Traffic not T3D? That line does not convince me that the KLAS @nrholland is loading is actually the latest version. Perhaps his/her installation of KLAS_for_Tower3D_SP3 went to the wrong folder and an older version is being used when he/she starts T3D? We all know that a lot of the posts on this forum are resolved when the correct installation route is explained. Where is T3D's forensic detective when you need him? Time to shine the @crbascott signal onto some clouds. 🙂 I already stated that this is a KLAS installation issue (which you basically repeated above) in this thread - twice. I can't help it if people choose to ignore me. The issue @nrholland is seeing is exactly what I reported back in December (https://forum.simflight.com/topic/84609-tower3d-pro-klas-terminal_e-issues/) and one of the reasons SP3 for KLAS was released. @Peabody all that line in the log file indicates is that @nrholland does have the latest version of RT. And to help educate, the sim will run fine and ignore an extra terminal entry (see a log extract below from a session I just ran), but it will freeze if a needed terminal entry is missing. Add terminal: Terminal_Cargo - AMF,FDX,UPS (Filename: C:/buildslave/unity/build/artifacts/generated/common/runtime/UnityEngineDebugBindings.gen.cpp Line: 42) Add terminal: Terminal_Janet - WWW (Filename: C:/buildslave/unity/build/artifacts/generated/common/runtime/UnityEngineDebugBindings.gen.cpp Line: 42) Add terminal: Terminal_Peabody - PPP (Filename: C:/buildslave/unity/build/artifacts/generated/common/runtime/UnityEngineDebugBindings.gen.cpp Line: 42) 1 Link to comment Share on other sites More sharing options...
winsaudi Posted August 7, 2018 Report Share Posted August 7, 2018 Thanks for your analysis Craig, When I saw that FeelThereAriel was agreeing with Peabody's conclusion, that started alarm bells ringing in my head. If only FeelThere would produce an intelligent installer similar to the NyergesDesign products, then this forum would be empty. (Apart from some rants from a loon in the NW of the USA that is). Wayne Link to comment Share on other sites More sharing options...
winsaudi Posted August 7, 2018 Report Share Posted August 7, 2018 Wouldn't it be a nice surprise if the EDDS add-on had the first FT intelligent installer? We can but dream. 🙂 Link to comment Share on other sites More sharing options...
ATC AlaskaGuy Posted August 7, 2018 Report Share Posted August 7, 2018 I seem to have the same problem with KLAS when I try to tell a aircraft to vacate runway on say 26R and to A6 it wants to go to B6 instead and doesn't like it when I tell the plane to vacate runway onto a6 I say Alfa Six and it doesn't like it and will go to Bravo 6 for some reason, is there going to be a update to fix this issue Link to comment Share on other sites More sharing options...
pete_agreatguy Posted August 7, 2018 Author Report Share Posted August 7, 2018 Some aircraft require a greater landing distance, is this what might be happening in your predicament? Link to comment Share on other sites More sharing options...
Peabody Posted August 7, 2018 Report Share Posted August 7, 2018 3 hours ago, crbascott said: I already stated that this is a KLAS installation issue (which you basically repeated above) in this thread - twice. I can't help it if people choose to ignore me. @nrholland. @Peabody all that line in the log file indicates is that @nrholland does have the latest version of RT. @crbascott My apologies I did not mean to question your knowledge. My post was intended as a question NOT a statement of fact. I don't know anyone on this forum so it was kind of a way to try to help. But it is so very obvious you know what you are talking about. Now with this new information it only makes sense the Janet terminal would be in RT because the stock game would not need it. I also offer apologies to nrholland for for a partial highjack of your thread, I did not mean to send them off defending themselves because of my post, I hope you get your problem fixed! P 2 Link to comment Share on other sites More sharing options...
crbascott Posted August 7, 2018 Report Share Posted August 7, 2018 1 hour ago, alaskaGuy2018 said: I seem to have the same problem with KLAS when I try to tell a aircraft to vacate runway on say 26R and to A6 it wants to go to B6 instead and doesn't like it when I tell the plane to vacate runway onto a6 I say Alfa Six and it doesn't like it and will go to Bravo 6 for some reason, is there going to be a update to fix this issue I know you are all about realism, so for a more realistic experience I would suggest using 26R for departures and having arrivals land on 26L - they'll take the A6 exit all day long there. 3 Link to comment Share on other sites More sharing options...
nrholland Posted August 8, 2018 Report Share Posted August 8, 2018 On 8/6/2018 at 7:42 PM, nrholland said: I just removed Tower 3D and am starting to install the sim back. After the first three airports that come with the game I then installed KLAS. When I run it at 100% there are no gates available in Terminal E. But if I run it at 50% there are two available gates. I did this at 1300 on the clock. A Volaris 320 came in and went to one of the unoccupied gates. I guess that's the problem. I don't know what it'll be like later in the day like around 2100. I haven't checked that yet. Link to comment Share on other sites More sharing options...
nrholland Posted August 8, 2018 Report Share Posted August 8, 2018 On 8/6/2018 at 7:42 PM, nrholland said: I am posting a copy of my game since I put everything back in the sim. I have installed all the airports. I have all of them thus far and am waiting patiently for more. game.log Link to comment Share on other sites More sharing options...
hexzed Posted August 8, 2018 Report Share Posted August 8, 2018 Is KLAS working OK now? I looked at my screenshot again, and in a case of not seeing the forest for the trees, i realised that it said 25R in your game log. If its updated correctly then it should have been 26R! Craig being correct. I loaded Real Traffic up just now at 1400, 100% traffic, and i do notice Terminal E is packed! I however had the Thomas Cook in the middle depart and then a Aeromexico flight arrive into that free gate. For comparison, i have also added a screenshot of the same time with my own schedule, which you will notice has a lot more free gates to play with Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now