Jump to content
The simFlight Network Forums
Sign in to follow this  
Driver170

New windows 10 and prosim

Recommended Posts

Just updated windows 10 and started prosim. I copy paste my previous FSUIPC.INI but when starting P3D none of my buttons are working that i assigned to my jetmax TQ.

Surely having my Backed up ini file will restore my settings?

FSUIPC5.ini

Share this post


Link to post
Share on other sites

You are not using Joy Letters, and your Windows change will have changed the IDs as well as GUIDs associated with each device. You [JoyNames] section contains:

AutoAssignLetters=No
0=JetMAX 737 Throttle
0.GUID={9C0DB280-638E-11E9-800A-444553540000}
2=Flybycockpits
2.GUID={2A48FB90-638F-11E9-8001-444553540000}
1=Flybycockpits
1.GUID={9C0DB280-638E-11E9-800B-444553540000}


Your buttons are almost all assigned to devices with IDs 1 and 2 (the only exceptions being Pause Toggle and Auto Throttle Arm). So only the two are assigned to the JetMax!

Change the IDs above to match what they ought to be for your assignments. The IDs are the 0, 1 and 2 before the = in each case, including the GUID lines. Also set AutAssignLetters=Yes so that letters are used for assignments and avoid these complications in the future. There's a chapter about Joy Letters in the user guide.

Pete

 

Share this post


Link to post
Share on other sites

Pete thanks for the explanation but I don’t quite follow sir.

What am I exactly changing and what to?

Where do i find the IDs for my FBC and TQ and also the GUIDS

Regarding the Autothrottle arm i just assigned that before sending the INI file to test my AT disengage button, but that didn’t even work!

 

Do you think I should start a new Profile for PS

Share this post


Link to post
Share on other sites
Here is my windows 7 FSUIPC entrys

[JoyNames]
AutoAssignLetters=No
0=Flybycockpits
0.GUID={E1A43F20-297C-11E6-8001-444553540000}
2=Flybycockpits
2.GUID={1C3177B0-AF83-11E7-8001-444553540000}
1=JetMAX 737 Throttle
1.GUID={A9095060-D445-11E5-8011-444553540000}

 

Share this post


Link to post
Share on other sites
3 hours ago, Driver170 said:

What am I exactly changing and what to?

I told you this: just make sure the ID's (the 0, 1, 2 before the = or .GUID= in those 6 lines) match your assignments!

3 hours ago, Driver170 said:

Where do i find the IDs for my FBC and TQ and also the GUIDS

There in the [JoyNames] section in the INI -- the one I showed you in my first reply!!! Didn't you see them?

2 hours ago, Driver170 said:

Here is my windows 7 FSUIPC entrys

Well that makes it easy then, doesn't it! In the Win10 INI the 0= and 0.GUID= should be 1= and 1.GUID=, and the 1- and 1.GUID= need to be 0= and 0.GUID=, respectively.

That will sort your JetMax assignments.

Unfortunately you have two "Flybycockpits£ devices. You'll need to test your assignments for those. If they are the wrong way around just renumber the 0 to 1 and 1 to 0.

Pete

 

Share this post


Link to post
Share on other sites

Sorry pete all a bit daunting at first.

If I didn’t have that windows 7 ini file how would i know what ID  number goes with what device and GUID?

Also you said

Unfortunately you have two "Flybycockpits£ devices. You'll need to test your assignments for those. If they are the wrong way around just renumber the 0 to 1 and 1 to 0.

Don’t you mean 0 to 2 or 2 to 0 per my windows 7 ini file for FBC ID number?

Share this post


Link to post
Share on other sites

Only buttons i need to assign are these.

The rest are through PS

 

[Buttons.PS] 6=P2,4,C65561,0 -{PAUSE_TOGGLE}- 7=R1,3,C65602,0 -{THROTTLE_DECR}- 8=U1,3,C0,0 -{Custom control: <0>}- 9=P1,0,C65752,0 -{PARKING_BRAKES}- 10=U1,0,C65752,0 -{PARKING_BRAKES}- 11=P0,4,C65561,0 -{PAUSE_TOGGLE}- 12=R1,1,C66635,0 -{THROTTLE1_DECR_SMALL}- 13=U1,1,C65967,0 -{THROTTLE1_CUT}- 14=R1,4,C66636,0 -{THROTTLE2_DECR_SMALL}- 15=U1,4,C65972,0 -{THROTTLE2_CUT}- 16=R2,5,K190,8 -{Key press: .>key}- 17=R65,0,K190,8 -{Key press: .>key}- 18=R65,1,K190,8 -{Key press: .>key}-

Share this post


Link to post
Share on other sites
2 hours ago, Driver170 said:

If I didn’t have that windows 7 ini file how would i know what ID  number goes with what device and GUID?

The GUID and name of the device go hand in hand. They are read from your system as it is now. it is only the IDs which need sorting out.

To do this just look as your assignments. Button assignments will bt P, R or U (for Press, repeat or Up) followed by the axis name (X, Y, Z etc). You can see the joystick IDs on screen in the assignments tabs, at the top.

2 hours ago, Driver170 said:

Don’t you mean 0 to 2 or 2 to 0 per my windows 7 ini file for FBC ID number?

Yes, sorry. So, you get the hang of it now?

Pete

 

 

Share this post


Link to post
Share on other sites
1 hour ago, Driver170 said:

i will change them about tonight

Test them first. You need to determine which is which of the two identical units.

Pete

 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×

Important Information

By using this site, you agree to our Terms of Use. Guidelines Privacy Policy We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.