Nono Posted October 4, 2019 Report Share Posted October 4, 2019 Hi all, I know this topic have been discuss for several time but I am totaly lost! I have last version FSUIPC 5/Wide FS 7. Ivap and TS2 are installed on PC slave. I would like to create PTT threw my joystick connected to PC master. cf log file: 450687 Server = PC-ASUS-NONO 450687 Trying TCP/IP host "PC-ASUS-NONO" port 8002 ... 450687 ... Okay, IP Address = ,,,,,,,,,,,,,,,,,,,,,,,, (I have hide ip adress!) 460812 Giving up server, looking for another! 532594 Trying to locate server: Need details from Server Broadcast 538672 Giving up server, looking for another! 656047 Trying to locate server: Need details from Server Broadcast 661094 Giving up server, looking for another! 799719 Trying to locate server: Need details from Server Broadcast 805781 Giving up server, looking for another! 963469 Trying to locate server: Need details from Server Broadcast 972656 Giving up server, looking for another! 1147031 Trying to locate server: Need details from Server Broadcast 1150078 Giving up server, looking for another! 1350594 Trying to locate server: Need details from Server Broadcast 1360734 Giving up server, looking for another! 1574765 Trying to locate server: Need details from Server Broadcast 1582875 Giving up server, looking for another! 1819312 Trying to locate server: Need details from Server Broadcast 1827437 Giving up server, looking for another! 6862797 Trying to locate server: Need details from Server Broadcast 6866812 Giving up server, looking for another! 7058453 ****** End of session performance summary ****** 7058453 Total time connected = 51 seconds 7058453 Reception maximum: 30 frames/sec, 1430 bytes/sec 7058453 Reception average whilst connected: 24 frames/sec, 1012 bytes/sec 7058453 Transmission maximum: 0 frames/sec, 176 bytes/sec 7058453 Transmission average whilst connected: 0 frames/sec, 26 bytes/sec 7058453 Max receive buffer = 588, Max send depth = 1, Send frames lost = 0 7058453 ********* Log file closed (Buffers: MaxUsed 2, Alloc 1262 Freed 1262 Refused 0) ********* and my wideFSclient.ini to press Q key is: ; PLEASE SEE WideFS documentation for parameter details ; ===================================================== [Config] ServerIPAddr=,,,,,,,,,,,,,,,,, (same ip than PC master and in log file) Protocol=TCP ServerName=PC-ASUS-NONO Port=8002 Window=43,44,886,589 Visible=Yes ButtonScanInterval=20 ClassInstance=0 NetworkTiming=5,1 MailslotTiming=1000,1000 PollInterval=2000 Port2=9002 ReconnectMinutes=0 ResponseTime=18 ApplicationDelay=0 TCPcoalesce=No WaitForNewData=500 MaxSendQ=100 OnMaxSendQ=Log NewSendScanTime=50 Priority=3,1,2 ; ----------------------------------------------- [User] Log=Errors+ Keysend1=81,16 Keysend1=81,24 UseSendInput=Yes ; =============================================== [Sounds] Path=C:\Users\arnau\Downloads\WideFS\Sound\ Device1=Périphérique audio principal Device2=Haut-parleurs (Realtek High Definition Audio) I pressed a joystick button calibrate in FSUIPC parameter on Button switch with key send fonction, but nothing running!! Do you have any ideas? Link to comment Share on other sites More sharing options...
Pete Dowson Posted October 4, 2019 Report Share Posted October 4, 2019 35 minutes ago, Nono said: 450687 ... Okay, IP Address = ,,,,,,,,,,,,,,,,,,,,,,,, (I have hide ip adress!) Why do you have to hide the IP address? It should be local to your local networked system, it means nothing to anyone else. These are usually like 192.168.n.n. If it looks like an Internet type of IP address then it's a problem with your router. Try setting you internal server IP address explicitly, "ServerIPAddr= ..." instead of giving the name. Pete Link to comment Share on other sites More sharing options...
Nono Posted October 4, 2019 Author Report Share Posted October 4, 2019 I confirm that my Ip adress is 192.168.1.XX and same value in my both file that I send to you.. OK I will test your reommandation Means: ServerIPaddr=192.168.1.XX" correct ? Link to comment Share on other sites More sharing options...
Nono Posted October 4, 2019 Author Report Share Posted October 4, 2019 perfect i's run!!! thanks Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now