Jump to content
The simFlight Network Forums
FeelThere

KNOWN ISSUES ON THE EMB V3

Recommended Posts

Dear Folks,

We would like to share the status of the upcoming SP for the EMB v3. Please note if you report something it will not automatically make this list and for sure it wont get here immediately. We need to verify, reproduce, fix, test then report. There will be issues, reports that will not make the list. We will not comment every single report, but we are actively monitor the forum. There is no timeframe on the SP, we are working as hard as we can to release it as soon as possible. FIXED means we fixed it and will be part of the upcoming SP. As we advance you will see more and more items making that list. If something is NOTED, please don't report it again. You are just taking the support's team time away from working on it.

IF YOU REPORT SOMETHING, PLEASE CHECK IF IT'S BEEN REPORTED.
TO MAKE THE FORUM CLEAN PLEASE DON'T REPORT IT AGAIN.
HOWEVER IF YOU WISH TO ADD SOMETHING NEW DON'T ADD IT INSIDE OF ANOTHER TOPIC WE MIGHT MISS IT. PLEASE OPEN A NEW ONE.

SOLUTION ALREADY RELEASED AS HOTFIX
-the EMB 175/195 is aliasing the sound to the 190 so if you don't have it, there will be missing sounds.
-newer ND database
-left/right landing light illuminates the VC
-new switch and knob sounds

FIXED (will be addressed in the upcoming SP)
-the EMB 175/195 is aliasing the sound to the 190 so if you don't have it, there will be missing sounds.
-missing customDB folder
-The PFD speed scale warning/caution colouring seems to be working off the prediction line as opposed to the current IAS.
-beacon light is showing in the VC
-the E190's wingview is need to be fixed
-E175's front doors open on both sides
-VSS camera is too dark at night
-E190's gear door
-175's winglet
-the front galley is dark from the outside view
-E195's first officer window can't be closed back
-higher res night textures in the VC
-mismatched 170/190 flaps
-The PFD speed scale warning/caution colouring seems to be working off the prediction line as opposed to the current IAS
-When pressing 'b' for the QNH setting. The altitude changes on PFD's and Standby instrument. However, the QNH will only change on the captain PFD. It appears that the standby and FO PFD Baro's are couples.
-APPROACHING MINIMUM is announced during takeoff in some cases
-updated AI logic
-On status page when we open the cargo door aft cargo door (shift+e+3) the page shows 2 cargo doors opened. If you close the fwd cargo door it shows the aft door as close, and the fwd as open.. (EMB 195)
-more dumped AT
-APU is burning fuel and the right tank gauge represents this, however to total fuel is not changing to represent L+R=T
-FD and Flight Path vector logic is updated
-Flt control page Rudder graphical error 
-FPL sequencing on final
-rangle LVARS
-the first officer's yoke is the same as the captain's
-climb speed restrictions are ignored
-various FDE reports
-brighter taxi lights
-max speed placards


TESTING
-SP1

WORKING ON


VERIFIED



NOTED
-When I first installed the airplane it didn't happen. Second time I loaded the airplane and on - this situation occurs and cannot be changed - Autobrakes, Windshield wipers, same for cockpit door lock switch and rudder trim switch.



NOT A BUG:
-wipers are not cleaning rain ----this is how's the A2A rain effect works that we use
-PDF/MFD's brightness knob you can increase the brightness but you cannot decrease. We did it to save on framerate.

----------PLEASE DO NOT REPLY TO THIS POST, IT'S RESERVED TO THE TEAM. ALL REPLIES WILL BE REMOVED IMMEDIATELY----------

Thank you

 

Vic & Team

LAST EDITED: Feb 19

  • Like 1

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use. Guidelines Privacy Policy We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.