antoniointini Posted December 18, 2019 Report Share Posted December 18, 2019 I found this issue on E195 - see image attached (I did not check in the other aircrafts). The night texture is of very poor quality. It becomes instantly better when you use the flood/storm knob. I would expect a high definition texture even without the flood/storm light. Best regards -- mods. edit: subject line to better describe issue Link to comment Share on other sites More sharing options...
scoobflight Posted December 18, 2019 Report Share Posted December 18, 2019 more details needed - all aircraft? only the locations pictured? Link to comment Share on other sites More sharing options...
antoniointini Posted December 19, 2019 Author Report Share Posted December 19, 2019 I can only confirm E175 and E195. I don't own the E170 and E190, so I can't check them. It happens pretty much in the whole instrument panel, where there are written stuff, like the pictures above (keyboard of the FMS and the reference speed table). Link to comment Share on other sites More sharing options...
DABspotting Posted December 19, 2019 Report Share Posted December 19, 2019 Can confirm I get low def textures with the dome light with the E175/195 Link to comment Share on other sites More sharing options...
scoobflight Posted December 19, 2019 Report Share Posted December 19, 2019 3 minutes ago, DABspotting said: Can confirm I get low def textures with the dome light with the E175/195 So you have the opposite issue from the OP? Link to comment Share on other sites More sharing options...
Matty260191 Posted December 19, 2019 Report Share Posted December 19, 2019 i can confirm i get blurry textures but only if i turn the chart light on... Link to comment Share on other sites More sharing options...
Matty260191 Posted December 19, 2019 Report Share Posted December 19, 2019 flood/dome is crisp Link to comment Share on other sites More sharing options...
antoniointini Posted December 19, 2019 Author Report Share Posted December 19, 2019 10 hours ago, scoobflight said: So you have the opposite issue from the OP? I believe it is the same thing. I forgot to mention that it is the dome light. Link to comment Share on other sites More sharing options...
antoniointini Posted December 19, 2019 Author Report Share Posted December 19, 2019 Please also have a look at the texture of the FMS. It appears that there is a mismatching layer or something. If you look at the number keys, you can see a circular light "shadow", decentralized to the its left. You can note the same pattern in the other keys and the screws of the MCDU. Link to comment Share on other sites More sharing options...
FeelThere Ariel Posted December 19, 2019 Report Share Posted December 19, 2019 A hotfix for the night light issue is meant to be released as soon as possible. You can follow its status here: https://forum.simflight.com/topic/88090-known-issues-on-the-emb-v3/ Link to comment Share on other sites More sharing options...
antoniointini Posted December 20, 2019 Author Report Share Posted December 20, 2019 Excelent, thanks for the quick response! Link to comment Share on other sites More sharing options...
FeelThere_Vic Posted December 20, 2019 Report Share Posted December 20, 2019 On 12/19/2019 at 1:42 PM, antoniointini said: Please also have a look at the texture of the FMS. It appears that there is a mismatching layer or something. If you look at the number keys, you can see a circular light "shadow", decentralized to the its left. You can note the same pattern in the other keys and the screws of the MCDU. It seems like the light is just hitting the keys in a weird angle. Most likely it will not happen at any other lighting condition. Link to comment Share on other sites More sharing options...
antoniointini Posted December 20, 2019 Author Report Share Posted December 20, 2019 2 hours ago, FeelThere said: It seems like the light is just hitting the keys in a weird angle. Most likely it will not happen at any other lighting condition. It is not light. I used "shadow" for lack of a better word, but it seems like a stain. Have a look at the screw holes in the upper part of the FMS, and you will notice that it is not a shadow. Link to comment Share on other sites More sharing options...
Biggles2010 Posted December 20, 2019 Report Share Posted December 20, 2019 3 hours ago, antoniointini said: It is not light. I used "shadow" for lack of a better word, but it seems like a stain. Have a look at the screw holes in the upper part of the FMS, and you will notice that it is not a shadow. Regarding the FMS keys, I cannot see why you think there is a problem. To me they look perfectly normal. The alpha numeric keys are indented, that is, they have a depression in the centre of each key. To represent that on a flat screen requires use of lighter and darker shades, as in any artistic work. Real FMS keys develop a shine in use, and the example shown gives a good representation of the real thing. Link to comment Share on other sites More sharing options...
antoniointini Posted December 20, 2019 Author Report Share Posted December 20, 2019 1 hour ago, Biggles2010 said: Regarding the FMS keys, I cannot see why you think there is a problem. To me they look perfectly normal. The alpha numeric keys are indented, that is, they have a depression in the centre of each key. To represent that on a flat screen requires use of lighter and darker shades, as in any artistic work. Real FMS keys develop a shine in use, and the example shown gives a good representation of the real thing. It is not the keys, but around them. I hope the picture below make it more clear: Link to comment Share on other sites More sharing options...
Matty260191 Posted December 20, 2019 Report Share Posted December 20, 2019 seriously your complaining about a screw texture? Link to comment Share on other sites More sharing options...
antoniointini Posted December 21, 2019 Author Report Share Posted December 21, 2019 9 hours ago, Matty260191 said: seriously your complaining about a screw texture? What's the problem? I payed US$60 in this aircraft, and I'm here supporting Feelthere with improvements/troubleshooting in this product. Link to comment Share on other sites More sharing options...
Matty260191 Posted December 21, 2019 Report Share Posted December 21, 2019 I thought you were reporting an issue that was about the light? Not the screw texture? Im sure they will add it too the list ..........At the bottom. Link to comment Share on other sites More sharing options...
antoniointini Posted December 21, 2019 Author Report Share Posted December 21, 2019 48 minutes ago, Matty260191 said: I thought you were reporting an issue that was about the light? Not the screw texture? Im sure they will add it too the list ..........At the bottom. They may add it to the bottom. I never asked for priority on this one. Link to comment Share on other sites More sharing options...
antoniointini Posted December 21, 2019 Author Report Share Posted December 21, 2019 Feelthere, just to make sure, there's two issues that I reported in this topic: the texture at night (dome light), and the stains in the FMS (not light related, appears to be a texture issue as well). Link to comment Share on other sites More sharing options...
FeelThere_Vic Posted December 21, 2019 Report Share Posted December 21, 2019 Please help us to understand which light is making the textures blurry; -flood, dome or chart light. Thank you Vic Link to comment Share on other sites More sharing options...
Matty260191 Posted December 22, 2019 Report Share Posted December 22, 2019 Chart light makes it all blury for me 1 Link to comment Share on other sites More sharing options...
DABspotting Posted December 22, 2019 Report Share Posted December 22, 2019 Mine happens when only tunring on the Dome Light 1 Link to comment Share on other sites More sharing options...
vali Posted December 22, 2019 Report Share Posted December 22, 2019 From the Chart light for me also. 1 Link to comment Share on other sites More sharing options...
FeelThere_Vic Posted December 22, 2019 Report Share Posted December 22, 2019 Thank you. Vic Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now