Jump to content
The simFlight Network Forums

Every day I need to reconfigure FSUIPC.


Recommended Posts

2 hours ago, NNi2020 said:

Every day I need to reconfigure FSUIPC. It works, then the day after all slope settings are reset.  Values displayed are correct but without recalibrating axis it's not working

There's no way FSUIPC loses any settings. They are stored in your FSUIPCV INI file and reloaded each time.

How are you actually detecting the the slope settings are lost? And how do you "recalibrate" if there correct values are already displayed? What do you change? Please tell us the actual things you see and do.

Without some actual information we can't really help much. We don't know even what simulator you are using, let alone the version of FSUIPC. And we'd need to see your FSUIPC settings anyway (the FSUIPC INI file).

Pete

 

Link to comment
Share on other sites

I'm administrator each time. I tried not touching any usb. Same. every time, the slope values are to be reset EACH time... So I need to recalibrate each time I use the sim . help me, this is blocking me for all my test work. my p3d is on Z:/p3dv5/ it was the same with p3dv4 in the original folder. 

 

Link to comment
Share on other sites

6 hours ago, NNi2020 said:

help me, this is blocking me for all my test work. my p3d is on Z:/p3dv5/ it was the same with p3dv4 in the original folder. 

You aren't helping us to help you. Please read my previous post, not far above, from three days ago!

And there's really no way lack of having a slope applied actually necessitates re-calibration. Slopes are set after calibrating and are applied on top. Their absence, assuming you are interpreting things correctly which at present seems very unlikely,  cannot possibly "block" all your test work!

Pete

 

 

Link to comment
Share on other sites

wow. I didnt see your message, only the one by niberon was displayed at the time I answered...

There's no way FSUIPC loses any settings. They are stored in your FSUIPCV INI file and reloaded each time.
-> technically it's not what happens on my PC and I want this happens

The slope settings is  15 but reacts like -15 or unset so i consider the calibration is gone despite what is displayed. 
 

Link to comment
Share on other sites

I know the software is working correctly. I'm not saying it doesnt work. I just say I HAVE a weird result on mine. 
I flashed the bios yesterday, some changes appeared on USB. 

 

[General]
UpdatedByVersion=6004
History=4RBA0QPZ1XUHJB1G4ZSDF
InitDelayDevicesToo=No
PMDG737offsets=Auto
PMDG747offsets=Auto
PMDG777offsets=Auto
Annotate=Yes
UseSystemTime=No
UseMidMouseBtn=Yes
MouseWheelMove=No
MouseWheelTrim=No
MouseWheelTrimSpeed=1
JoystickTimeout=20
RestoreSimcWindows=No
FixMachSpeedBug=No
AutoScanDevices=Yes
DisconnTrimForAP=No
ZeroElevForAPAlt=No
ThrottleSyncAll=No
WhiteMessages=No
ShowPMcontrols=No
SpoilerIncrement=512
MagicBattery=No
RudderSpikeRemoval=No
ElevatorSpikeRemoval=No
AileronSpikeRemoval=No
ReversedElevatorTrim=No
ClockSync=No
ClockSyncMins=5
ClearWeatherDynamics=No
TimeForSelect=4
LoadFlightMenu=No
LoadPlanMenu=No
PauseAfterCrash=No
BrakeReleaseThreshold=75
SaveDataWithFlights=No
ZapSound=firework
ZapAirRange=1.50
ZapGroundRange=0.25
ZapCylinderAltDiff=0
ShortAircraftNameOk=Substring
UseProfiles=Yes
EnableMouseLook=No
DelayedMouseLookZoom=No
WideLuaGlobals=Yes
AxesWrongRange=No
TCASid=Flight
TCASrange=40,3
AxisCalibration=No
DirectAxesToCalibs=No
ShowMultilineWindow=Yes
SuppressSingleline=No
SuppressMultilineFS=No
AxisIntercepts=No
DontResetAxes=No
ThreadAffinityMask=x0
LuaAffinityMask=x0
InitDelay=0
GetNearestAirports=Yes
LogOptionProtect=Yes
TimeForLuaClosing=2
WeatherReadFactor=2
WeatherRewriteSeconds=1
TrafficStallTime=1
InitialStallTime=10
NormalStallTime=1
LuaRerunDelay=66
ComReadLoopTime=20
InvokeFSUIPCOptionsKey=222,8
OptionsDialogOffset=-397, -136
Console=No
ConsoleWindowTopMost=No
ControlsListBuild=34709
FSVersionUsed="Lockheed Martin® Prepar3D® v5",5.0.21.34709
SimConnectUsed=5.0.0.0

[Traffic Limiter]
AirportPreference=50
PlannedAirportsPreference=50
GroundPreference=50
NearerPreference=50
TargetFrameRate=0
TrafficLimit=0

[JoyNames]
AutoAssignLetters=No
0=USB Game Controllers
0.GUID={3A8C2530-F40F-11E8-8001-444553540000}
1=GUMSTICK
1.GUID={B0A1C0A0-895B-11E8-8001-444553540000}
2=Saitek Pro Flight Rudder Pedals
2.GUID={91AC41C0-41A7-11E9-8001-444553540000}

[JoystickCalibration]
RudderBlendLowest=1
AllowSuppressForPFCquad=Yes
ExcludeThrottleSet=Yes
ExcludeMixtureSet=Yes
ExcludePropPitchSet=Yes
SepRevsJetsOnly=No
ApplyHeloTrim=No
UseAxisControlsForNRZ=No
FlapsSetControl=0
FlapDetents=No
ReverserControl=66292
Reverser1Control=66422
Reverser2Control=66425
Reverser3Control=66428
Reverser4Control=66431
MaxThrottleForReverser=256
AileronTrimControl=66731
RudderTrimControl=66732
CowlFlaps1Control=66162
CowlFlaps2Control=66163
CowlFlaps3Control=66164
CowlFlaps4Control=66165
SteeringTillerControl=0
MaxSteerSpeed=60
Aileron=-16384,0,0,16383
Rudder=-16384,0,0,16383
SlopeRudder=7
Throttle=-16384,16254/8
SlopeThrottle=-1
LeftBrake=-16384,16383/24
RightBrake=-16384,16383/24
SlopeAileron=6
Elevator=-16384,0,0,16383
SlopeElevator=5

[Axes]
PollInterval=10
RangeRepeatRate=10
0=0X,1419,D,1,0,0,0    -{ DIRECT: Aileron }-
1=0Y,256,D,2,0,0,0    -{ DIRECT: Elevator }-
2=1S,256,D,4,0,0,0    -{ DIRECT: Throttle }-
3=2X,256,D,7,0,0,0    -{ DIRECT: LeftBrake }-
4=2Y,256,D,8,0,0,0    -{ DIRECT: RightBrake }-
5=2R,256,D,3,0,0,0    -{ DIRECT: Rudder }-

[Buttons]
PollInterval=25
ButtonRepeat=20,10
1=R0,36,C65615,0     -{ELEV_TRIM_UP}-
2=U0,36,C65615,0     -{ELEV_TRIM_UP}-
3=R0,32,C65607,0     -{ELEV_TRIM_DN}-
4=U0,32,C65607,0     -{ELEV_TRIM_DN}-
5=P1,8,C65758,0     -{FLAPS_INCR}-
6=P1,9,C65759,0     -{FLAPS_DECR}-
7=P0,1,C66157,0     -{FIRE_PRIMARY_GUNS}-

[AutoSave]
Next=1
Interval=60
Files=10
SaveOnGround=No
AutoSaveEnabled=No

[GPSout]
GPSoutEnabled=No
Port=COM1
Speed=4800
Interval=2000
PosTo6Decimal=No
SimModeIndicator=No
Sentences=

[GPSout2]
GPSoutEnabled=No
Port=<none set>
Speed=4800
Interval=2000
PosTo6Decimal=No
SimModeIndicator=No
Sentences=

[WideServer]
WideFSenabled=Yes

[Sounds]
Path=Y:\P3DV5\Sound\
Device1=Périphérique audio principal
Device2=Haut-parleurs (M-Track)
Device3=C32F391 (NVIDIA High Definition Audio)

[Profile.Ecureuil]
1=AS-355 Air Rescue
2=BK-117 Misty Gray

[JoystickCalibration.Ecureuil]
AllowSuppressForPFCquad=Yes
ExcludeThrottleSet=Yes
ExcludeMixtureSet=Yes
ExcludePropPitchSet=Yes
SepRevsJetsOnly=No
ApplyHeloTrim=No
UseAxisControlsForNRZ=No
FlapsSetControl=0
FlapDetents=No
ReverserControl=66292
Reverser1Control=66422
Reverser2Control=66425
Reverser3Control=66428
Reverser4Control=66431
MaxThrottleForReverser=256
AileronTrimControl=66731
RudderTrimControl=66732
CowlFlaps1Control=66162
CowlFlaps2Control=66163
CowlFlaps3Control=66164
CowlFlaps4Control=66165
SteeringTillerControl=0
MaxSteerSpeed=60
RudderBlendLowest=1
Aileron=-16384,0,0,16383
SlopeAileron=6
Elevator=-16384,0,0,16383
Rudder=-16384,64,64,16383
SlopeRudder=10
Throttle=-16384,16254/8
LeftBrake=-16384,16383/24
RightBrake=-16384,16383/24
SlopeElevator=15

[Window.Message Window]
NewDocked=15, 35, 1890, 18

[Profile.PIPER]
1=Piper Cub

[JoystickCalibration.PIPER]
AllowSuppressForPFCquad=Yes
ExcludeThrottleSet=Yes
ExcludeMixtureSet=Yes
ExcludePropPitchSet=Yes
SepRevsJetsOnly=No
ApplyHeloTrim=No
UseAxisControlsForNRZ=No
FlapsSetControl=0
FlapDetents=No
ReverserControl=66292
Reverser1Control=66422
Reverser2Control=66425
Reverser3Control=66428
Reverser4Control=66431
MaxThrottleForReverser=256
AileronTrimControl=66731
RudderTrimControl=66732
CowlFlaps1Control=66162
CowlFlaps2Control=66163
CowlFlaps3Control=66164
CowlFlaps4Control=66165
SteeringTillerControl=0
MaxSteerSpeed=60
RudderBlendLowest=1
Aileron=-16384,0,0,16383
SlopeAileron=-15
Elevator=-16384,0,0,16383/8
SlopeElevator=15
Rudder=-16384,0,0,16383/8
SlopeRudder=-12
Throttle=-16384,16254/8
SlopeThrottle=6
LeftBrake=-16384,16383/24
RightBrake=-16384,16383/24

[Profile.jet]
1=M2K-C 103-LI
2=SSW Tornado IDS UBUNTU Italian Air Force 6-26 Monogrey
3=SSW Tornado IDS Italian Air Force Operazione Locusta 1990
4=SSW Tornado IDS UBUNTU 102 Sqn. IAF 6-39

[Axes.jet]
RangeRepeatRate=10
0=0X,256,D,1,0,0,0    -{ DIRECT: Aileron }-
1=0Y,256,D,2,0,0,0    -{ DIRECT: Elevator }-
2=1S,256,D,4,0,0,0    -{ DIRECT: Throttle }-
3=2X,256,D,7,0,0,0    -{ DIRECT: LeftBrake }-
4=2Y,256,D,8,0,0,0    -{ DIRECT: RightBrake }-
5=2R,256,D,3,0,0,0    -{ DIRECT: Rudder }-

[Profile.Corvette]
1=MS760 Paris F-BOJO

[JoystickCalibration.Corvette]
AllowSuppressForPFCquad=Yes
ExcludeThrottleSet=Yes
ExcludeMixtureSet=Yes
ExcludePropPitchSet=Yes
SepRevsJetsOnly=No
ApplyHeloTrim=No
UseAxisControlsForNRZ=No
FlapsSetControl=0
FlapDetents=No
ReverserControl=66292
Reverser1Control=66422
Reverser2Control=66425
Reverser3Control=66428
Reverser4Control=66431
MaxThrottleForReverser=256
AileronTrimControl=66731
RudderTrimControl=66732
CowlFlaps1Control=66162
CowlFlaps2Control=66163
CowlFlaps3Control=66164
CowlFlaps4Control=66165
SteeringTillerControl=0
MaxSteerSpeed=60
RudderBlendLowest=1
Elevator=-16384,0,0,16383
SlopeElevator=15
Rudder=-16384,0,0,16383/8
SlopeRudder=15
Throttle=-16384,16254/8
SlopeThrottle=-1
LeftBrake=-16384,16383/24
RightBrake=-16384,16383/24
Aileron=-16384,0,0,16254
SlopeAileron=15

[AutoSaveFilesV5]
Next=1

[JoystickCalibration.jet]
AllowSuppressForPFCquad=Yes
ExcludeThrottleSet=Yes
ExcludeMixtureSet=Yes
ExcludePropPitchSet=Yes
SepRevsJetsOnly=No
ApplyHeloTrim=No
UseAxisControlsForNRZ=No
FlapsSetControl=0
FlapDetents=No
ReverserControl=66292
Reverser1Control=66422
Reverser2Control=66425
Reverser3Control=66428
Reverser4Control=66431
MaxThrottleForReverser=256
AileronTrimControl=66731
RudderTrimControl=66732
CowlFlaps1Control=66162
CowlFlaps2Control=66163
CowlFlaps3Control=66164
CowlFlaps4Control=66165
SteeringTillerControl=0
MaxSteerSpeed=60
RudderBlendLowest=1
Aileron=-16384,0,0,16383
SlopeAileron=8
Elevator=-16384,0,0,16383
SlopeElevator=7
Rudder=-16384,0,0,16383
SlopeRudder=7
Throttle=-16384,16254/8
SlopeThrottle=-1
LeftBrake=-16384,16383/24
RightBrake=-16384,16383/24

[Profile.BELL412]
1=Bell 412 EP C-GCHX
2=Gazelle-SA342 ALAT

[JoystickCalibration.BELL412]
AllowSuppressForPFCquad=Yes
ExcludeThrottleSet=Yes
ExcludeMixtureSet=Yes
ExcludePropPitchSet=Yes
SepRevsJetsOnly=No
ApplyHeloTrim=No
UseAxisControlsForNRZ=No
FlapsSetControl=0
FlapDetents=No
ReverserControl=66292
Reverser1Control=66422
Reverser2Control=66425
Reverser3Control=66428
Reverser4Control=66431
MaxThrottleForReverser=256
AileronTrimControl=66731
RudderTrimControl=66732
CowlFlaps1Control=66162
CowlFlaps2Control=66163
CowlFlaps3Control=66164
CowlFlaps4Control=66165
SteeringTillerControl=0
MaxSteerSpeed=60
RudderBlendLowest=1
Aileron=-16384,0,0,16383
SlopeAileron=9
Elevator=-16384,0,0,16255
SlopeElevator=14
Rudder=-16384,64,64,16383
SlopeRudder=15
Throttle=-16384,16254/8
LeftBrake=-16384,16383/24
RightBrake=-16384,16383/24
 

Link to comment
Share on other sites

So the settings are OK, the software work ok. BUT THE PROBLEM remains.
I need to RE-Calibrate everytime to have the settings( previously set) EFFECTIVeLY smoothing the axis. Else, the previously displayed, loaded settings, reloaded settings are NOT WORKING unless I
re-do the 
AXIS calibration, clear, rescan and reset. I Don't know how I should write this to make it more clear. Probably a youtube video could be from some help.

thanks.

Link to comment
Share on other sites

1 hour ago, NNi2020 said:

I need to RE-Calibrate everytime to have the settings( previously set) EFFECTIVeLY smoothing the axis. Else, the previously displayed, loaded settings, reloaded settings are NOT WORKING unless I
re-do the 
AXIS calibration, clear, rescan and reset. I Don't know how I should write this to make it more clear.

But there's no way possible for that to happen? I wouln't even know how to start looking.

I do see that you haven't really calibrated any of the controls properly in the first place. Apart from "slopes" the calibration numbers are pretty much all defaulted.Please follow the numbered steps in the User Guide for proper calibration. And I've never ever seen anyone use slope values of -15 or +15. those are so extreme!

Try first calibrating your controls properly in Windows. The fact that you find them so oversensitive really suggests to me that the calibration values actually Registered by Windows are bad. FSUIPC can only work with what it is given by Windows. It is not reading the USB devices directly (altohugh you can, via plug-ins, if desired -- but that needs some programming).

Pete

 

Link to comment
Share on other sites

Thanks This would explain a lot. it seems that windows values changed a lot. The problem appeared with the 1809 windows update... so I carry on investigation  . Thanks again. I really need your software working especially for helicopters . 

Link to comment
Share on other sites

Working better with your yesterday version. Can you send a mail to users when you release a new version ? I got it via Simarket, and never received any mail in case of update. 
Problems stays here. BUt is clearly related to windows controller calibration that is lost for unknown reason. Working as soon as I redo the windows calibration now, but it doesnt change the problem; except the windows calibration process is shorter, but must be done everyday. I need to investigate this now. Thanks. All good with FSUIPC, as soon as the windows calibration is applied, FSUIPC became effective. 

Link to comment
Share on other sites

51 minutes ago, NNi2020 said:

Working better with your yesterday version

There have been minimal changes in recent releases (check the changes/history log), and certainly none that have anything to do with your problem.

52 minutes ago, NNi2020 said:

Can you send a mail to users when you release a new version ?

No, not possible, sorry. Just check www.fsuipc.com every now and then, or at least before posting for support so that you know you are on the latest release. FYI, 6.0.5 was released yesterday. There have been a few patch releases recently to sort out some teething problems with FSUIPC6, but hopefully this will be the last release for a while - we have other things we need to start looking into 😉 !

 

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use. Guidelines Privacy Policy We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.