Jump to content
The simFlight Network Forums

Cannot set reversers in fsuipc5


marten
 Share

Recommended Posts

Hello,

I have a problem wiht assigning reversers in fsuipc5 when i press any reverse handle than there is no response in fsuipc to assign to a specific engine but all other handles of my saitek throtlle are working fine but the strange thing is that for engine 1 and 2 reverse is working without assingning in fsuipc but for 3 and 4 no responce for your info i am usig 2 saitek throtlle units.

When i go into game controllers all handles and buttons responding correctly it looks like the problem occured after the windows 2004 update because before that everything was ok.

Regards marten.

 

 

 

Link to comment
Share on other sites

20 hours ago, marten said:

I have a problem with assigning reversers in fsuipc5 when i press any reverse handle than there is no response in fsuipc to assign to a specific engine but all other handles of my saitek throttle are working fine but the strange thing is that for engine 1 and 2 reverse is working without assigning in fsuipc but for 3 and 4 no response for your info i am using 2 saitek throttle units.

Which saitek throttles are you using? (I ask as I didn't know that some models have a reverser)
Could you attach your FSUIPC5.ini please and I'll take a look, as well as your FSUIPC5.log and FSUIPC5.JoyScan.csv files.

20 hours ago, marten said:

the strange thing is that for engine 1 and 2 reverse is working without assigning in FSUIPC

That is strange.... Do you have controls enabled or disabled in PD3v4? If enabled, check the assignments. Otherwise, are you running any additional software for the throttles that could be interfering?

20 hours ago, marten said:

When i go into game controllers all handles and buttons responding correctly it looks like the problem occurred after the windows 2004 update because before that everything was ok.

That's rather worrying...I'm still on 1909 but was thinking of upgrading this afternoon.

Link to comment
Share on other sites

HI,

I have 2 logitech G saitek pro flight throttle quadrands also controllers are enabled and i am using no other software exept the mad catz drivers for the units.

I attached the FSUIPC.ini and the FSUIPC.log file i hope it will give you more information because this problem was suddenly there and I dit not changed  anything.      

FSUIPC5.ini FSUIPC5.log

Link to comment
Share on other sites

First, can you please update to the latest version of FSUIPC5, v5.157. You are still on 5.124 - I can only support the latest version of each product.

Also, you have some errors in your lua scripts:
         138625 *** LUA Error: ...ockheed Martin\Prepar3D v4\Modules\NGXMCP_PP_202.lua:101: attempt to perform arithmetic on a nil value

Your ini file also has no axes assignments. Where are you assigning - in the sim or in your Mad Catz driver?

22 hours ago, marten said:

when i press any reverse handle

But your throttles don't have a reverse handle, do they? Do you mean when entering the 'reverse range' of your throttle?

You are also using aa PMDG aircraft:

        166516 Aircraft="PMDG 747-400 KLM Royal Dutch Airlines (PH-BFN | 2017)

For PMDG aircraft, you should not calibrate in FSUIPC really, due to SimConnect priority levels. It can result in multiple values being received via SimConnect.

I've no idea why an update to windows 2004 should change anything. I've just updated but haven't had time to test/check anything yet.

Link to comment
Share on other sites

After updating fsuipc 5 it was possible to assingn all 4 reversers in fsuipc so everyting works fine now but now I have a problem with Wide FS because it is not registrated any more when I try to registrate there is a error no Wide FS entry to check (code 32) how can I fix this because in the old version it was ok.

For your info  the  saitek pro flight throttle quadrands have reverse when you push the throttle handles further than idle you get reverse.

Regards marten.

 

Link to comment
Share on other sites

10 hours ago, marten said:

I have a problem with Wide FS because it is not registrated any more when I try to registrate there is a error no Wide FS entry to check (code 32)

If you had previously registered then there is no need to re-register - you should have skipped registration (clicked 'not now') and your existing key file would have been used.

Did you enter all three details - name, email and your WideFS key?

Link to comment
Share on other sites

By the way, you should activate the "JoyLetters" facility. You can do this by setting AutoAssignLetters to Yes in the [JoyNames] section of your ini.  this will prevent you loosing assignments if your joystick ids change. It looks like this has already happened once, as you have entries assigned to device '3' which doesn't exist - you can remove these entries (highlighted in bold below):

Quote

[Buttons]
PollInterval=25
ButtonRepeat=20,10
1=R1,8,C65971,0     -{THROTTLE2_DECR}-
2=U1,8,C65972,0     -{THROTTLE2_CUT}-
3=R1,2,C65966,0     -{THROTTLE1_DECR}-
4=U1,2,C65967,0     -{THROTTLE1_CUT}-
5=R3,6,C65976,0     -{THROTTLE3_DECR}-
6=U3,6,C65977,0     -{THROTTLE3_CUT}-
9=R3,7,C65966,0     -{THROTTLE1_DECR}-
10=U3,7,C65967,0     -{THROTTLE1_CUT}-
11=R3,8,C65971,0     -{THROTTLE2_DECR}-
12=U3,8,C65972,0     -{THROTTLE2_CUT}-

13=R1,6,C65976,0     -{THROTTLE3_DECR}-
14=U1,6,C65977,0     -{THROTTLE3_CUT}-
15=R1,7,C65966,0     -{THROTTLE1_DECR}-
16=U1,7,C65967,0     -{THROTTLE1_CUT}-

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use. Guidelines Privacy Policy We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.