GBOULANGER 0 Posted January 5 Report Share Posted January 5 Hi Peter thanks for your attention in fact i guess the problem is not FSUIPC it is either thrustmaster TCA Throttle or Aerosoft airbus, i'm sorry to disturb you Quote Link to post Share on other sites
SE-KMG 0 Posted January 6 Report Share Posted January 6 Hi. I experienced the same issue that the throttles seems to get stuck at idle with FSUIPS when using separate axis ex. Axis Throttle 1/2. But when selecting throttle one as "Axis Throttle Set" the are now working fine, tho you can not use them separately. Let me now if you experience the same. Cheers Quote Link to post Share on other sites
GBOULANGER 0 Posted January 6 Report Share Posted January 6 Hi SE-KMG your experience is very interesting and i will try this configuration and give you a feed back just to be shure of my well understanding you experienced this configuration with the Aerosoft Airbus A320/321 and FSX SE ? when you speak about separate axis, do you mean this choice in Aerosoftairbus configurator or elsewhere ? after assigning axis to "Axis throttle set" when calibrating, do you exclude any other parameter (like AXIS_THROTTLEX_SET ?) Thanks - Cheers Quote Link to post Share on other sites
SE-KMG 0 Posted January 6 Report Share Posted January 6 (edited) Hi GBOULANGER, 20 hours ago, GBOULANGER said: you experienced this configuration with the Aerosoft Airbus A320/321 and FSX SE ? Unfortunately I am using Aersoft Airbus Pro in P3D V4.5 and FSUIPC 5. But it could still be worth to try. 20 hours ago, GBOULANGER said: when you speak about separate axis, do you mean this choice in Aerosoftairbus configurator or elsewhere ? after assigning axis to "Axis throttle set" when calibrating, do you exclude any other parameter (like AXIS_THROTTLEX_SET ?) In the "Axis Assignment" in FSUIPC. When you select you axis, under "Type of action required", I selected "Send to FS as normal axis", click the box and select "Axis Throttle Set". I am trying to upload an image to make is clearer but the forum will not let me. Let me know if it changes anything. Cheers. Edited January 7 by SE-KMG Corrected Axis Throttle Set Quote Link to post Share on other sites
Pete Dowson 286 Posted January 7 Report Share Posted January 7 15 hours ago, SE-KMG said: I selected "Send to FS as normal axis", click the box and select "Throttle Set". You should probably select Axis throttle set instead. The Throttle set controls are the original FS98 controls which have a reverse zone. it is possible that the Airbus doesn't like those. If you assigned in the sim itself it would be the Axis throttle set controls. Pete Quote Link to post Share on other sites
Pluto7777 0 Posted January 17 Report Share Posted January 17 Can i find somewhere a complete guide how to setup my TCA airbus units (throttles and joystick) together with FSUIPC in order to work OK with FSLabs airbus (not aerosoft) Quote Link to post Share on other sites
John Dowson 134 Posted January 17 Report Share Posted January 17 7 minutes ago, Pluto7777 said: Can i find somewhere a complete guide how to setup my TCA airbus units (throttles and joystick) together with FSUIPC in order to work OK with FSLabs airbus Maybe check on the FSLabs forums. For throttle set-up, see this post: https://forums.flightsimlabs.com/index.php?/topic/26781-thrustmaster-airbus-throttle/ John Quote Link to post Share on other sites
GBOULANGER 0 Posted January 18 Report Share Posted January 18 just a few words, out of respect for your answer, to tell you that I put everything aside because I cannot achive anything with the Aerosoft Airbus A320/321. When I resume i'll keep you posted I Quote Link to post Share on other sites
Jetdriver50 0 Posted February 19 Report Share Posted February 19 Please make sure before attempting any FSUIPC, or any other control setup with the TC throttle that you have accomplished the calibration instructions using the bar lock and procedure for flashing it’s operating parameters. Until this procedure is completed you are sending garbage to fsuipc or other joystick (yes it’s outputs are x,y joystick for throttles) configurations. Note there are also 3 microswitch outputs in each throttle for the autothrottle, TO, and max detents. Reverse also has an output and variable range to capture. Quote Link to post Share on other sites
John Dowson 134 Posted February 19 Report Share Posted February 19 Thanks for the info @Jetdriver50. @GBOULANGER Did you do this? Quote Link to post Share on other sites
Jetdriver50 0 Posted February 19 Report Share Posted February 19 The procedure is located here: https://ts.thrustmaster.com/download/accessories/manuals/TCA_Quadrant/TCA_Quadrant-Throttle_Calibration.pdf Quote Link to post Share on other sites
Jetdriver50 0 Posted February 19 Report Share Posted February 19 ..and after calibration reference the outputs @ pg 3 & 4 here: https://ts.thrustmaster.com/download/accessories/manuals/TCA_Quadrant/TCA_Quadrant Airbus_Edition_user_manual.pdf Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.