FSUIPC7 version 7.5.0-beta available for both MSFS2020 and MSFS2024

[LeoSchoonbroodt]

Yes copied the complete fsuipc-lvar-module folder structure from MSFS2020 community to the MSFS2024 community.
It's an aircraft copied from the MSFS2020 community folder and the name isn't changed. 
Also confirmed because the plane loads and corresponding profile file and lua file are loaded.
I will check the persistent storage locations and let you know if that's the case and will enable WASM debugging

BTW also ipc.execCalcCode wich i also use a lot for sending Hvars because you stated earlier that it not needs to know the Hvars did not work.

Leo

[LeoSchoonbroodt]

John
Totally forgot were this persistant storage is, i have done it before but it's totally gone now from my memory, can you point me to it?
I cant find ant FSUIPC in AppData\Local but also not in Roaming were all the other apps store their data.

Leo

 

[SMN204]

MSFS 2024
Piper PA-24-250 Comanche.

Followed your instructions for the 2024
 - Replacing FSUIPC7.exe ( v7.4.18 to v 7.5.0 beta)
 - fsuipc-lvar-module from MSFS2020 Community folder to MSFS2024 Community folder

Starting FSUIPC manually after starting MSFS 2024 before flight start
Start flight
FSUIPC works fine at first, but stops working after a few switches.
Rebooting FSUIPC does not help!
Only exit from MSFS 2024 and a new start.
After restart MSFS2024 everything happens again

P.S
Noticed that only what is assigned on the right side stops working.


The one on the left continues to work!

 

 

FSUIPC7.log

[kr283]

HI John,

I'm seeing an issue with FSUIPC7 hanging when trying to List LVARS through the Add-ons -> WASM -> List Lvars

FSUIPC7.log doesn't appear to show any errors, but can attach if needed.

 

Thanks

[LeoSchoonbroodt]

Hi John,
From the FSUIPC_WASM.log i can see that it doesn't find the .hvar file for the plane. although they are present in the fsuipc-lvar-module\modules folder of 2020 and 2024.
They are NOT listed in the layout.json, but for 2020 that was never a problem.

In the persistent storage i find a MSFS2020 and a MSFS2024 folder.
Only the MSFS2020 folder contains a  the fsuipc-lvar-module folder with only a work folder, containing the attached FSUIPC_WASM.log but no modules folder with hvar files.

Is it possible that FSUIPC only looks for hvar files listed in layout.json as that would explain why the 2 not listed therein are not found?

Sorry forgot to mention:
several calculatorcode executions worked this time but stopped after a few seconds.

Leo

[jabloomf1230]

9 hours ago, John Dowson said:

Yes.

I think you must be mistaken. FSUIPC does not appear anywhere in MSFS2020. What you are probably seeing is a profile (that you created) called FSUIPC.
MSFS2020 (and 2024) automatically creates  profiles for many controllers, but if you assign your controllers in FSUIPC we recommend first creating an empty profile in MSFS.

As with MSFS2020, you should create empty profiles in MSFS2024 for your controllers / devices if assigning in FSUIPC. If you are using the same FSUIPC installation for 2024 as with 2020, then your current assignments should be preserved.

That's the first thing that I did. I duplicated and cleared the throttle and joystick presets, renamed them and made them default. The axes from the FSUIPC ini file were picked up, but the buttons were not. In any case, MSFS2024 continued to used its own presets for the buttons, so maybe the clear function in the controls settings doesn't work. Here's the log file, but whatever's wrong is something to do with my setup and I'll keep trying to figure it out.

FSUIPC7.log

[John Dowson]

1 hour ago, ljk811 said:

Why is the path of FSUIPC_WASM.log is C:\Users\ljk81\AppData\Roaming\Microsoft Flight Simulator 2024\WASM\MSFS2020\fsuipc-lvar-module\work\FSUIPC_WASM.log, not C:\Users\ljk81\AppData\ Roaming\Microsoft Flight Simulator 2024\WASM\MSFS2024\fsuipc-lvar-module\work\FSUIPC_WASM.log

Because that is the folder MSFS2024 has designated for this WASM. Presumably because MSFS2024 detects that the WASM has been compiled against the MSFS2020 SDK.
I wouldn't worry about this - I certainly aren't!

1 hour ago, ljk811 said:

In fact, this is just a problem of programmers' obsessive-compulsive disorder, not a code bug problem.

Then please try and restrain this instinct...at the moment its difficult to get anything done when I am continually answering support questions....

 

[John Dowson]

@LeoSchoonbroodt Are you actually using the hvar files? These are only needed if using in lua or macro scripts (or via offsets). It is far easier to use presets, where these files are not needed., I am going to remove these as they are continually causing issues and are really not needed anymore. They are a hangover from the early days of MSFS2020.
If using hvars directly, switch to using presets instead. If using presets for hvars, stop going on about hvars and just talk about presets.

1 hour ago, LeoSchoonbroodt said:

In the persistent storage i find a MSFS2020 and a MSFS2024 folder.
Only the MSFS2020 folder contains a  the fsuipc-lvar-module folder with only a work folder, containing the attached FSUIPC_WASM.log but no modules folder with hvar files.

 Of course not. They are only there if you add them. I do install some hvar files, but they are installed with the FSUIPC WASM folder under your Community folder. As with the FSUIPC_WASM.ini, there is an order to how these are loaded, but please see the Advanced User guide - I am not going to explain this again when this has nothing to do with MSFS2024...
It all works in exactly the same way with MSFS2024 as with MSFS2020, only the locations have changed. I will update the documentation with the new locations for MSFS2024 before I release officially.

@SMN204  Looks like you are suffering from a WASM crash. See the FAQ entry on how to resolve this - but take care to use the MSFS2024 locations. If you had this in MSFS2020, you probably added an FSUIPC_WASM.ini with updated ini parameters to resolve  this in your MSFS2020 WASM persistence storage area. You need to copy this across to the MSFS2024 WASM persistence storage area.

@kr283 Your issue also sounds like a WASM crash (IF you have the WASM installed). Please check the FAQ entry on what to do. But it is A:WAYS helpful if you can attach a log if/when you have issues. If I need further info or additional logging, I will ask. But attaching a log when you experience am issue is always helpful, and I would encourage everyone to do this - it can save a lot of time...

52 minutes ago, jabloomf1230 said:

That's the first thing that I did. I duplicated and cleared the throttle and joystick presets, renamed them and made them default. The axes from the FSUIPC ini file were picked up, but the buttons were not. In any case, MSFS2024 continued to used its own presets for the buttons, so maybe the clear function in the controls settings doesn't work. Here's the log file, but whatever's wrong is something to do with my setup and I'll keep trying to figure it out.

@jabloomf1230 The clear function in FSUIPC only clears the FSUIPC assignments. not the ones in MSFS. It is up to you to either create an empty profile in MSFS, or delete any assignments to a button/Switch/key/Axis in MSFS of assigning in FSUIPC. Other than that, I am not  sure what your issue is. Your log file looks ok, but shows you are using 7.5.0a. Please download and update to 7.5.0b.

Thats it from me for tonight....

John

 

 

[SMN204]

49 minutes ago, John Dowson said:

You need to copy this across to the MSFS2024 WASM persistence storage area.

In "MSFS2024 WASM persistence storage area:
C:\Users\xxx\AppData\Roaming\Microsoft Flight Simulator 2024\WASM
there are two folders:
- MSFS2020
- MSFS2024

Which one should I copy fsuipc-lvar-module folder with corrected FSUIPC_WASM.ini to?
Both?
 

[John Dowson]

13 minutes ago, SMN204 said:

In "MSFS2024 WASM persistence storage area:
C:\Users\xxx\AppData\Roaming\Microsoft Flight Simulator 2024\WASM
there are two folders:
- MSFS2020
- MSFS2024

Which one should I copy fsuipc-lvar-module folder with corrected FSUIPC_WASM.ini to?

Neither. You copy the fsuipc-lvar-module folder to the MSFS2024 Community folder, as described in the initial post. If you then want to add an  FSUIPC_WASM.ini file to the WASM persistence storage area, you need to first run MSFS2024 with the WASM installed, then the WASM storage area folder will be created under the ...\WASM\MSFS2020 folder. Then add your ini to the  ...\WASM\MSFS2020\fsuipc-lvar-module\work folder.

I don't understand why this is so difficult. This works in exactly the same way as with MSFS2020, it is just the folder names that have changed. I will update the documentation for this, once I have updated the installer...

 

[LeoSchoonbroodt]

46 minutes ago, John Dowson said:

@LeoSchoonbroodt Are you actually using the hvar files? These are only needed if using in lua or macro scripts (or via offsets). It is far easier to use presets, where these files are not needed., I am going to remove these as they are continually causing issues and are really not needed anymore. They are a hangover from the early days of MSFS2020.
If using hvars directly, switch to using presets instead. If using presets for hvars, stop going on about hvars and just talk about presets.

 Of course not. They are only there if you add them. I do install some hvar files, but they are installed with the FSUIPC WASM folder under your Community folder. As with the FSUIPC_WASM.ini, there is an order to how these are loaded, but please see the Advanced User guide - I am not going to explain this again when this has nothing to do with MSFS2024...
It all works in exactly the same way with MSFS2024 as with MSFS2020, only the locations have changed. I will update the documentation with the new locations for MSFS2024 before I release officially.

John,
I don't use the Hvar files anymore, today i use ipc.execCalcCode because there were more Hvars as get loaded from the files and in the past you advised to do it that way.
Just mentioned it as found that they were loaded under 2020 and NOT loaded under 2024 and don't know if it's related.
Also, i use a lot of lua files all using ipc.execCalcCode and don't feel to create all these presets and modify all my files when calculator code also should work.

You mentioned that it could use the files from persisted storage, that's why i mention that there are no hvar files in persisted storage.

Stays the question why it loads the hvar files for 2020 and not for 2024, used or not.

Also, it executes calculator code for a few seconds as you can see from the attached log and thereafter not anymore while in 2020 my lua can run AND function for hours and execute calculator code.

To be complete: i copied the FSUIPC7 folder for 2020 to a 2024FSUIPC7 folder containing the version 7.5b and copied the fsuipc-lvar-module folder from the 2020 community folder to the 2024 community folder.

Leo

 

 

 

[SMN204]

23 minutes ago, John Dowson said:

You copy the fsuipc-lvar-module folder to the MSFS2024 Community folder, as described in the initial post. If you then want to add an  FSUIPC_WASM.ini file to the WASM persistence storage area, you need to first run MSFS2024 with the WASM installed, then the WASM storage area folder will be created under the ...\WASM\MSFS2020 folder. Then add your ini to the  ...\WASM\MSFS2020\fsuipc-lvar-module\work folder.

🙂 I've already had it copied fsuipc-lvar-module folder to the MSFS2024 Community folder before!
And I've run MSFS2024 before.
And under ....AppData\Roaming\Microsoft Flight Simulator 2024\WASM  I see two folders  MSFS2020 and MSFS2024  😶
Probably 2024 was created when MSFS2024 was installed, and 2020 when it was started MSFS2024 after fsuipc-lvar-module
I got it, in the 2020  fsuipc-lvar-module\work folder  👍

[John Dowson]

39 minutes ago, SMN204 said:

And under ....AppData\Roaming\Microsoft Flight Simulator 2024\WASM  I see two folders  MSFS2020 and MSFS2024

These are the WASM permanent storage areas created by MSFS2024.

@LeoSchoonbroodt Please don't embed your questions into quoted text, you are just making things difficult for me...I am not going to respond to that, sorry. But please check that you are not suffering from a WASM crash if you have issues where calc. code updates stop working. I have already posted enough information on this. Otherwise, please post any quertions unquoted...

That is it definitely it for tonight now - no more responses from me until late tomorrow or even later. Please review before posting.

John

One more piece of advise: if you are manually copying aircraft from MSFS2020 to MSFS2024 and have issues, please DO NOT post here. Doing this just complicates things, and I will not look into any issues if you have done this. 

 

Edited 14 hours ago by John Dowson
Further info added

[kaha]

On 11/22/2024 at 10:53 AM, John Dowson said:

Why are you sure about this? If its the same aircraft, I would have thought the same settings would apply. This is the case with P3D, where I use one installation of FSUIPC6 for both P3Fv5 and P3Dv6 (and sometimes also with P3Dv4).

...

I flew the Carenado Cessna 182 RG in 2024 and it behaves differently from 2020. I would need different curves for aileron, elevator and rudder axis. How can I do that? Or is the only possibility to manually copy the FSUIPC folder? Or I could maintain 2 different .ini files and copy them before starting the sim.

I think this will also apply to some other aircraft.

Karl