dekodan

Hello Gene, Sorry for the late reply. I have been out of the country and was not in the sim world. I will look into your post, thank you. Did you hear anything from Simplugins? Thanks Dan

Hello Pete, Thanks for being curious and pushing the investigation. Firstly, I double checked, there are no other lua files in the modules folder. Next, I tried assigning axes by using the direct to FS method. I assigned to the "axis aileron set" and "axis elevator set". Nothing works while the lua file is present. Pull it out and everything is fine. Attached are the most recent logs. In both cases, axes logging is on, I try some moves with the yoke. I also try to change aircraft. In the log with LUA present, there doesn't seem to be any axes movements and then the LUA error appears after trying to change aircraft. In the log without the LUA file, everything works just fine it seems. Dan FSUIPC4_NO LUA.log FSUIPC4_WITH LUA.log

That's quite possibly true. The program comes from simplugins panel builder. I have been using it a long time and never had an issue until this updated fsuipc. So which side is conflicting with which is hard for me to determine. I have another workaround which unfortunately means I skip Fsuipc for my axes. I have remapped everything in SPAD.Next including my custom bandings. SPAD.next, like Fsuipc supports LVARS so I was able to replicate all the functions I need. It's all working for me again. Axes, special bandings and my gauges through Simpanel. Thank you for all your help Daniel

Hi Pete, OK, so the rogue Lua plug-in is for Simpanels A2A instruments to drive my second PC that has my instruments gauges. It is actually required or my gauges don't function properly. Now that I put the ipcinit.lua file back in the modules folder, my gauges works great again. But now my axes don't work anymore. Grrrr! If I remove the ipcinit.lua, all controls work fine again but I lose some of my gauges in simpanel.... I'm going bonkers trying to sort this out. Any ideas? Dan attached is my ipcinit.lua file if that helps. ipcinit.lua

Hi Pete, You sound like me so I appreciate the annoyance on the cut off log entry earlier. I should have looked at it more carefully. Everything is working fine now. The difference between what I did before and after is the following. I deleted the ini file the first time and rebooted all. The results are the ones we have been discussing; i.e. nothing working. My latest attempt was to delete all contents from the modules folder and reinstall fsuipc and reassign all my controls. All works now. My only conclusion is something corrupted between the P3D client update and the installation of your latest fsuipc. I don't see any significant differences in the ini file from what I posted initially and this now new one after reinstall. The device IDs seem the same, the basic axes assignments seem the same too... maybe I am missing something if you feel like investigating. Here is my ini file: [General] UpdatedByVersion=4962 History=4XLTR7L3ITAZ0IORAUN8J InitDelayDevicesToo=No Annotate=Yes NewInterceptTextMenu=No UseSystemTime=No UseMidMouseBtn=Yes MouseWheelMove=No MouseWheelTrim=No MouseWheelTrimSpeed=1 JoystickTimeout=20 PollGFTQ6=Yes BlankDisplays=No FixControlAccel=No FixMachSpeedBug=No NewDeleteVehiclesForAES=No AutoScanDevices=Yes AssignJoystickIDs=Yes VisibilityOptions=No OneCloudLayer=No CloudTurbulence=No CloudIcing=No GenerateCirrus=No SuppressCloudTurbulence=No MaxIce=-4 MinIce=-4 UpperWindGusts=No SuppressWindTurbulence=No SuppressWindVariance=No WindTurbulence=No TurbulenceRate=1.0,5.0 TurbulenceDivisor=20,20,40,40 SuppressAllGusts=No MaxSurfaceWind=0 WindLimitLevel=200 WindDiscardLevel=400 WindAjustAltitude=No WindAjustAltitudeBy=2000 SmoothBySimTime=No WindSmoothing=No WindSmoothness=2 WindSmoothAirborneOnly=Yes PressureSmoothness=0 TemperatureSmoothness=0 DisconnTrimForAP=No ZeroElevForAPAlt=No ThrottleSyncAll=No WhiteMessages=No ShowPMcontrols=No SpoilerIncrement=512 MagicBattery=No RudderSpikeRemoval=No ElevatorSpikeRemoval=No AileronSpikeRemoval=No ReversedElevatorTrim=No ClockSync=No ClockSyncMins=5 ClearWeatherDynamics=No OwnWeatherChanges=No TimeForSelect=4 LoadFlightMenu=No LoadPlanMenu=No PauseAfterCrash=No BrakeReleaseThreshold=75 SaveDataWithFlights=No ZapSound=firework ShortAircraftNameOk=Substring UseProfiles=Yes EnableMouseLook=No DelayedMouseLookZoom=No WideLuaGlobals=Yes AxesWrongRange=No TCASid=Flight TCASrange=40 AxisCalibration=No DirectAxesToCalibs=No ShowMultilineWindow=Yes SuppressSingleline=No SuppressMultilineFS=No AxisIntercepts=No DontResetAxes=No ThreadAffinityMask=x0 LuaAffinityMask=x0 InitDelay=0 GetNearestAirports=Yes LogOptionProtect=Yes OOMcheck=Yes OOMcheckInterval=10 TimeForLuaClosing=2 WeatherReadFactor=2 WeatherRewriteSeconds=1 CustomWeatherModify=No SimConnectStallTime=4 InitialStallTime=10 NormalStallTime=1 LuaRerunDelay=66 Console=No FSVersionUsed="Lockheed Martin® Prepar3D® v3",3.4.22.19868 SimConnectUsed=3.4.0.0 [JoyNames] AutoAssignLetters=No 0=Saitek Pro Flight Yoke 0.GUID={65F47080-6E34-11E3-8001-444553540000} 1=BU0836A Interface 1.GUID={7B14B960-A2A8-11E6-8001-444553540000} 2=Saitek Pro Flight Cessna Trim Wheel 2.GUID={2188EAB0-6E35-11E3-8001-444553540000} 3=Pro Flight TPM System 3.GUID={4F372CE0-7E35-11E4-8001-444553540000} 4=Saitek Pro Flight Rudder Pedals 4.GUID={066A5200-6E35-11E3-8001-444553540000} [Axes] PollInterval=10 RangeRepeatRate=10 0=1X,256,D,1,0,0,0 -{ DIRECT: Aileron }- 1=1Y,256,D,2,0,0,0 -{ DIRECT: Elevator }- 2=2X,256,D,21,0,0,0 -{ DIRECT: ElevatorTrim }- 3=3X,256,D,4,0,0,0 -{ DIRECT: Throttle }- 4=3R,256,D,6,0,0,0 -{ DIRECT: Mixture }- 5=4X,256,D,7,0,0,0 -{ DIRECT: LeftBrake }- 6=4Y,256,D,8,0,0,0 -{ DIRECT: RightBrake }- 7=4R,256,D,3,0,0,0 -{ DIRECT: Rudder }- [Buttons] PollInterval=25 ButtonRepeat=20,10 [AutoSave] Next=1 Interval=60 Files=10 SaveOnGround=No AutoSaveEnabled=No [GPSout] GPSoutEnabled=No [GPSout2] GPSoutEnabled=No [Traffic Limiter] TrafficLimit=0 AirportPreference=50 GroundPreference=50 NearerPreference=50 [WideServer] WideFSenabled=Yes [Sounds] Path=C:\Program Files (x86)\Lockheed Martin\Prepar3D v3\Sound\ Device1=Primary Sound Driver Device2=Headset Earphone (Razer Kraken 7.1) Device3=Realtek Digital Output (Realtek High Definition Audio) Device4=Speakers (Realtek High Definition Audio) Device5=Realtek Digital Output(Optical) (Realtek High Definition Audio) [JoystickCalibration] AllowSuppressForPFCquad=Yes ExcludeThrottleSet=Yes ExcludeMixtureSet=Yes ExcludePropPitchSet=Yes SepRevsJetsOnly=No ApplyHeloTrim=No UseAxisControlsForNRZ=No FlapsSetControl=0 FlapDetents=No ReverserControl=66292 Reverser1Control=66422 Reverser2Control=66425 Reverser3Control=66428 Reverser4Control=66431 MaxThrottleForReverser=256 AileronTrimControl=66731 RudderTrimControl=66732 CowlFlaps1Control=66162 CowlFlaps2Control=66163 CowlFlaps3Control=66164 CowlFlaps4Control=66165 SteeringTillerControl=0 MaxSteerSpeed=60 LeftBrake=-16380,16380/16 RightBrake=-16380,16380/16 Throttle=-16380,16380 Mixture=-16380,16380 Aileron=-16380,-512,512,16380 Elevator=-16380,-512,512,16380 [MacroFiles] 1=A2A_C172 2=A2A_Cherokee_180 [Profile.A2A_Cherokee_180] 1=Piper Pa-28-180 Cherokee 4 [Axes.A2A_Cherokee_180] RangeRepeatRate=10 0=0Z,256 1=0Z,B,0,16383,65752,0 -{ Entering=PARKING_BRAKES }- 2=0Z,B,-16384,0,65752,1 -{ Entering=PARKING_BRAKES }- 3=0U,256 4=0U,B,6272,16383,M2:2,1 -{ Entering=Macro A2A_Cherokee_180: L:FSelCherokeeState set }- 5=0U,B,-4031,6272,M2:2,0 -{ Entering=Macro A2A_Cherokee_180: L:FSelCherokeeState set }- 6=0U,B,-16384,-4031,M2:2,2 -{ Entering=Macro A2A_Cherokee_180: L:FSelCherokeeState set }- 7=0V,256 8=0V,B,2580,16383,M2:1,0 -{ Entering=Macro A2A_Cherokee_180: L:PrimerState set }- 9=0V,B,-5676,2580,M2:1,1 -{ Entering=Macro A2A_Cherokee_180: L:PrimerState set }- 10=0V,B,-16384,-5676,M2:1,2 -{ Entering=Macro A2A_Cherokee_180: L:PrimerState set }- 11=1X,256,D,1,0,0,0 -{ DIRECT: Aileron }- 12=1Y,256,D,2,0,0,0 -{ DIRECT: Elevator }- 13=2X,256,D,21,0,0,0 -{ DIRECT: ElevatorTrim }- 14=3X,256,D,4,0,0,0 -{ DIRECT: Throttle }- 15=3R,256,D,6,0,0,0 -{ DIRECT: Mixture }- 16=4X,256,D,7,0,0,0 -{ DIRECT: LeftBrake }- 17=4Y,256,D,8,0,0,0 -{ DIRECT: RightBrake }- 18=4R,256,D,3,0,0,0 -{ DIRECT: Rudder }-

Hi Pete, HOLD on this for now... I completely deleted all traces of FSUIPC and have done a complete reinstall. I have had success with 2 axes... Trying everything and might be back on track. I have no idea why this fixes the problem but it does... I'll come back with further news.. Dan

Hi Pete, Always worked ok with A2A... So just gave a default aircraft a try (Beech Baron 58). I assigned the axes in FSUIPC, works fine inside there. Back to the cockpit and nothing. I turned on the axis logging. I am assuming the output of the log is in fsuipc4.log? Here it is: ********* FSUIPC4, Version 4.962 (8th February 2017) by Pete Dowson ********* Windows 10 Pro 64 Bit reported as Build 14393, Release ID: 1607 (OS 10.0) Prepar3D.exe version = 3.4.22.19868 Reading options from "C:\Program Files (x86)\Lockheed Martin\Prepar3D v3\Modules\FSUIPC4.ini" Running inside Prepar3D v3 on Windows 10 Module base=58CB0000 User Name= User Addr= FSUIPC4 Key is provided WIDEFS7 not user registered, or expired 0 System time = 11/02/2017 11:00:29 0 FLT path = "C:\Users\Danny-SIM\Documents\Prepar3D v3 Files\" 0 ------ Module Version Check ------ 0 acontain.dll: 3.4.22.19868 0 api.dll: 3.4.22.19868 0 controls.dll: 3.4.22.19868 0 fs-traffic.dll: 3.4.22.19868 0 G3D.dll: 3.4.22.19868 0 language.dll: 3.4.22.19868 0 sim1.dll: 3.4.22.19868 0 visualfx.dll: 3.4.22.19868 0 weather.dll: 3.4.22.19868 0 window.dll: 3.4.22.19868 0 ---------------------------------- 0 Trying C:\Program Files (x86)\Lockheed Martin\Prepar3D v3\Modules\SimConnectP3D3.dll 0 Found it: trying to connect 0 FS path = "C:\Program Files (x86)\Lockheed Martin\Prepar3D v3\" 266 ---------------------- Joystick Device Scan ----------------------- 266 Product= Pro Flight Cessna Trim Wheel 266 Manufacturer= Saitek 266 Vendor=06A3, Product=0BD4 (Version 1.7) 266 Serial Number= RD012324 266 Product= BU0836A Interface 266 Manufacturer= Leo Bodnar 266 Vendor=16C0, Product=05BA (Version 1.34) 266 Serial Number= B56542 266 Product= Saitek Pro Flight Rudder Pedals 266 Manufacturer= Saitek 266 Vendor=06A3, Product=0763 (Version 1.1) 266 Serial Number= 266 Product= Saitek Pro Flight Yoke 266 Manufacturer= Saitek 266 Vendor=06A3, Product=0BAC (Version 3.0) 266 Serial Number= 266 Product= Pro Flight TPM System 266 Manufacturer= Mad Catz 266 Vendor=06A3, Product=0B4D (Version 1.100) 266 Serial Number= G0000398 266 ------------------------------------------------------------------- 360 LogOptions=00000000 00000001 360 ------------------------------------------------------------------- 360 ------ Setting the hooks and direct calls into the simulator ------ 360 --- CONTROLS timer memory location obtained ok 360 --- SIM1 Frictions access gained 375 --- FS Controls Table located ok 375 --- Installed Mouse Macro hooks ok. 375 --- Wind smoothing fix is installed 375 --- SimConnect intercept for texts and menus option is off 375 --- All links okay (except older global weather setting method) 375 ------------------------------------------------------------------- 375 SimConnect_Open succeeded: waiting to check version okay 375 Trying to use SimConnect Prepar3D 375 Opened separate AI Traffic client okay 45360 Running in "Lockheed Martin® Prepar3D® v3", Version: 3.4.22.19868 (SimConnect: 3.4.0.0) 45360 Initialising SimConnect data requests now 45360 FSUIPC Menu entry added 45360 LUA.0: beginning "C:\Program Files (x86)\Lockheed Martin\Prepar3D v3\Modules\ipcInit.lua" 45422 C:\Users\Danny-SIM\Documents\Prepar3D v3 Files\FBPH Parked CYRO.fxml 45422 C:\Program Files (x86)\Lockheed Martin\Prepar3D v3\SimObjects\Airplanes\A2A_Piper_PA28_180_Cherokee\PA28_180.air 99625 User Aircraft ID 2 supplied, now being used 100032 System time = 11/02/2017 11:02:09, Simulator time = 11:01:20 (16:01Z) 100172 Aircraft="Piper Pa-28-180 Cherokee 4" 170563 Sim stopped: average frame rate for last 71 secs = 37.4 fps 170563 Max AI traffic was 0 aircraft 272657 Sim stopped: average frame rate for last 95 secs = 45.1 fps 272657 Max AI traffic was 0 aircraft 343297 Sim stopped: average frame rate for last 35 secs = 47.3 fps 343297 Max AI traffic was 0 aircraft 4500828 Sim stopped: average frame rate for last 4153 secs = 53.0 fps 4500828 Max AI traffic was 0 aircraft 4511203 C:\Program Files (x86)\Lockheed Martin\Prepar3D v3\SimObjects\Airplanes\beech_baron_58\Beech_Baron_58.air 4511407 Aircraft="Beech Baron 58" 4512032 *** LUA Error: ipcinit_SOURCE.lua:36: attempt to perform arithmetic on global 'HOBHR4' (a nil value) 4543297 Sim stopped: average frame rate for last 31 secs = 44.2 fps 4543297 Max AI traffic was 0 aircraft 4596422 Sim stopped: average frame rate for last 36 secs = 47.0 fps 4596422 Max AI traffic was 0 aircraft 4616157 LogOptions changed, now 10000000 00000001

Hello Pete, Thanks for your reply. See my answers/comments below. I assure you, I can see and calibrate them properly in FSUIPC. I have been using your addon for a long time and very familiar with it. The only thing I changed was moving to the updated P3D client and your update. I might have mis-stated. The controllers are not enabled in P3D. I understand why you would think this. I replaced the Roll and Pitch axes of my Saitek Pro Flight Yoke with the BU0836A interface because the stock firmware on the Saitek Yoke is rubbish. I did this many months ago. As explained above - new joystick board to read these axes. The reason you only see two axes in the ini file: When my problems started, I scrapped the original fsuiipc.ini file in case I was having conflicts. When I started everything over, there are blank assignments. As a test, I only assigned those two axes. In the case above, profile specific. In the case below, it was just a non-profile specific test with one axis. For the life of me, I cannot see why this is not working. Your help is greatly appreciated. Thanks Dan

Hello - I need help please. After upgrading to 3.4.22 P3D with their hotfix and updating FSUIPC 4.962 (registered), I have lost all my axes assignments. I have deleted the ini file and tried again and nothing. Inside FSUIPC, I can see the movements of all the axes. I can assign them and calibrate them no problem. Back in the cockpit I get nothing. I have no conflict inside the standard control settings in P3D. No axes are assigned. I am pasting the new ini file (where I only reassigned elevator and aileron as a test). I still have my old ini file should that be required to debug. [General] UpdatedByVersion=4962 History=4P6JBZDO8L0F9KACVF8T5 InitDelayDevicesToo=No Annotate=Yes NewInterceptTextMenu=No UseSystemTime=No UseMidMouseBtn=Yes MouseWheelMove=No MouseWheelTrim=No MouseWheelTrimSpeed=1 JoystickTimeout=20 PollGFTQ6=Yes BlankDisplays=No FixControlAccel=No FixMachSpeedBug=No NewDeleteVehiclesForAES=No AutoScanDevices=Yes AssignJoystickIDs=Yes VisibilityOptions=No OneCloudLayer=No CloudTurbulence=No CloudIcing=No GenerateCirrus=No SuppressCloudTurbulence=No MaxIce=-4 MinIce=-1 UpperWindGusts=No SuppressWindTurbulence=No SuppressWindVariance=No WindTurbulence=No TurbulenceRate=1.0,5.0 TurbulenceDivisor=20,20,40,40 SuppressAllGusts=No MaxSurfaceWind=0 WindLimitLevel=200 WindDiscardLevel=400 WindAjustAltitude=No WindAjustAltitudeBy=2000 SmoothBySimTime=No WindSmoothing=No WindSmoothness=2 WindSmoothAirborneOnly=Yes PressureSmoothness=0 TemperatureSmoothness=0 DisconnTrimForAP=No ZeroElevForAPAlt=No ThrottleSyncAll=No WhiteMessages=No ShowPMcontrols=No SpoilerIncrement=512 MagicBattery=No RudderSpikeRemoval=No ElevatorSpikeRemoval=No AileronSpikeRemoval=No ReversedElevatorTrim=No ClockSync=No ClockSyncMins=5 ClearWeatherDynamics=No OwnWeatherChanges=No TimeForSelect=4 LoadFlightMenu=No LoadPlanMenu=No PauseAfterCrash=No BrakeReleaseThreshold=75 SaveDataWithFlights=No ZapSound=firework ShortAircraftNameOk=Substring UseProfiles=Yes EnableMouseLook=No DelayedMouseLookZoom=No WideLuaGlobals=Yes AxesWrongRange=No TCASid=Flight TCASrange=40 AxisCalibration=No DirectAxesToCalibs=No ShowMultilineWindow=Yes SuppressSingleline=No SuppressMultilineFS=No AxisIntercepts=No DontResetAxes=No ThreadAffinityMask=x0 LuaAffinityMask=x0 InitDelay=0 GetNearestAirports=Yes LogOptionProtect=Yes OOMcheck=Yes OOMcheckInterval=10 TimeForLuaClosing=2 WeatherReadFactor=2 WeatherRewriteSeconds=1 CustomWeatherModify=No SimConnectStallTime=1 InitialStallTime=10 NormalStallTime=1 LuaRerunDelay=66 FSVersionUsed="Lockheed Martin® Prepar3D® v3",3.4.22.19868 SimConnectUsed=3.4.0.0 [JoyNames] AutoAssignLetters=No 0=Saitek Pro Flight Yoke 0.GUID={65F47080-6E34-11E3-8001-444553540000} 1=BU0836A Interface 1.GUID={7B14B960-A2A8-11E6-8001-444553540000} 2=Saitek Pro Flight Cessna Trim Wheel 2.GUID={2188EAB0-6E35-11E3-8001-444553540000} 3=Pro Flight TPM System 3.GUID={4F372CE0-7E35-11E4-8001-444553540000} 4=Saitek Pro Flight Rudder Pedals 4.GUID={066A5200-6E35-11E3-8001-444553540000} [Axes] PollInterval=10 RangeRepeatRate=10 0=1X,256,D,1,0,0,0 -{ DIRECT: Aileron }- [MacroFiles] 1=A2A_C172 2=A2A_Cherokee_180 [LuaFiles] 1=ipcinit [Buttons] PollInterval=25 ButtonRepeat=20,10 [AutoSave] Next=1 Interval=60 Files=10 SaveOnGround=No AutoSaveEnabled=No [GPSout] GPSoutEnabled=No [GPSout2] GPSoutEnabled=No [Traffic Limiter] TrafficLimit=0 AirportPreference=50 GroundPreference=50 NearerPreference=50 [WideServer] WideFSenabled=Yes [Sounds] Path=C:\Program Files (x86)\Lockheed Martin\Prepar3D v3\Sound\ Device1=Primary Sound Driver Device2=Headset Earphone (Razer Kraken 7.1) Device3=Realtek Digital Output (Realtek High Definition Audio) Device4=Speakers (Realtek High Definition Audio) Device5=Realtek Digital Output(Optical) (Realtek High Definition Audio) [JoystickCalibration] AllowSuppressForPFCquad=Yes ExcludeThrottleSet=Yes ExcludeMixtureSet=Yes ExcludePropPitchSet=Yes SepRevsJetsOnly=No ApplyHeloTrim=No UseAxisControlsForNRZ=No FlapsSetControl=0 FlapDetents=No ReverserControl=66292 Reverser1Control=66422 Reverser2Control=66425 Reverser3Control=66428 Reverser4Control=66431 MaxThrottleForReverser=256 AileronTrimControl=66731 RudderTrimControl=66732 CowlFlaps1Control=66162 CowlFlaps2Control=66163 CowlFlaps3Control=66164 CowlFlaps4Control=66165 SteeringTillerControl=0 MaxSteerSpeed=60 Aileron=-16351,186,186,16259 Elevator=-16356,-225,-225,16129 [Profile.A2A Cherokee 180] 1=Piper Pa-28-180 Cherokee 4 [Axes.A2A Cherokee 180] RangeRepeatRate=10 0=1X,256,D,1,0,0,0 -{ DIRECT: Aileron }- 1=1Y,256,D,2,0,0,0 -{ DIRECT: Elevator }- [JoystickCalibration.A2A Cherokee 180] AllowSuppressForPFCquad=Yes ExcludeThrottleSet=Yes ExcludeMixtureSet=Yes ExcludePropPitchSet=Yes SepRevsJetsOnly=No ApplyHeloTrim=No UseAxisControlsForNRZ=No FlapsSetControl=0 FlapDetents=No ReverserControl=66292 Reverser1Control=66422 Reverser2Control=66425 Reverser3Control=66428 Reverser4Control=66431 MaxThrottleForReverser=256 AileronTrimControl=66731 RudderTrimControl=66732 CowlFlaps1Control=66162 CowlFlaps2Control=66163 CowlFlaps3Control=66164 CowlFlaps4Control=66165 SteeringTillerControl=0 MaxSteerSpeed=60 Aileron=-16351,186,186,16259 Elevator=-16356,-225,-225,16129 Log: ********* FSUIPC4, Version 4.962 (8th February 2017) by Pete Dowson ********* Windows 10 Pro 64 Bit reported as Build 14393, Release ID: 1607 (OS 10.0) Prepar3D.exe version = 3.4.22.19868 Running inside Prepar3D v3 on Windows 10 Module base=58D10000 User Name="**********" User Addr="****************" FSUIPC4 Key is provided WIDEFS7 not user registered, or expired 0 System time = 09/02/2017 14:55:02 0 FLT path = "C:\Users\Danny-SIM\Documents\Prepar3D v3 Files\" 0 ------ Module Version Check ------ 0 acontain.dll: 3.4.22.19868 0 api.dll: 3.4.22.19868 0 controls.dll: 3.4.22.19868 0 fs-traffic.dll: 3.4.22.19868 0 G3D.dll: 3.4.22.19868 0 language.dll: 3.4.22.19868 0 sim1.dll: 3.4.22.19868 0 visualfx.dll: 3.4.22.19868 0 weather.dll: 3.4.22.19868 0 window.dll: 3.4.22.19868 0 ---------------------------------- 0 Trying C:\Program Files (x86)\Lockheed Martin\Prepar3D v3\Modules\SimConnectP3D3.dll 0 Found it: trying to connect 0 FS path = "C:\Program Files (x86)\Lockheed Martin\Prepar3D v3\" 125 ---------------------- Joystick Device Scan ----------------------- 125 Product= Pro Flight Cessna Trim Wheel 125 Manufacturer= Saitek 125 Vendor=06A3, Product=0BD4 (Version 1.7) 125 Serial Number= RD012324 125 Product= BU0836A Interface 125 Manufacturer= Leo Bodnar 125 Vendor=16C0, Product=05BA (Version 1.34) 125 Serial Number= B56542 140 Product= Saitek Pro Flight Rudder Pedals 140 Manufacturer= Saitek 140 Vendor=06A3, Product=0763 (Version 1.1) 140 Serial Number= 140 Product= Saitek Pro Flight Yoke 140 Manufacturer= Saitek 140 Vendor=06A3, Product=0BAC (Version 3.0) 140 Serial Number= 140 Product= Pro Flight TPM System 140 Manufacturer= Mad Catz 140 Vendor=06A3, Product=0B4D (Version 1.100) 140 Serial Number= G0000398 140 ------------------------------------------------------------------- 250 LogOptions=00000000 00000001 250 ------------------------------------------------------------------- 250 ------ Setting the hooks and direct calls into the simulator ------ 250 --- CONTROLS timer memory location obtained ok 250 --- SIM1 Frictions access gained 250 --- FS Controls Table located ok 250 --- Installed Mouse Macro hooks ok. 250 --- Wind smoothing fix is installed 250 --- SimConnect intercept for texts and menus option is off 250 --- All links okay (except older global weather setting method) 250 ------------------------------------------------------------------- 250 SimConnect_Open succeeded: waiting to check version okay 250 Trying to use SimConnect Prepar3D 250 Opened separate AI Traffic client okay 31640 Running in "Lockheed Martin® Prepar3D® v3", Version: 3.4.22.19868 (SimConnect: 3.4.0.0) 31640 Initialising SimConnect data requests now 31640 FSUIPC Menu entry added 31640 LUA.0: beginning "C:\Program Files (x86)\Lockheed Martin\Prepar3D v3\Modules\ipcInit.lua" 31703 C:\Users\Danny-SIM\Documents\Prepar3D v3 Files\FBPH Parked CYRO.fxml 31703 C:\Program Files (x86)\Lockheed Martin\Prepar3D v3\SimObjects\Airplanes\A2A_Piper_PA28_180_Cherokee\PA28_180.air 103265 User Aircraft ID 2 supplied, now being used 103906 System time = 09/02/2017 14:56:46, Simulator time = 14:55:59 (19:55Z) 104031 Aircraft="Piper Pa-28-180 Cherokee 4" 1284828 Sim stopped: average frame rate for last 961 secs = 35.0 fps 1284828 Max AI traffic was 0 aircraft 1339062 Sim stopped: average frame rate for last 36 secs = 39.3 fps 1339062 Max AI traffic was 0 aircraft 1360922 Aircraft="Piper Pa-28-180 Cherokee 4" 1807078 Sim stopped: average frame rate for last 394 secs = 38.0 fps 1807078 Max AI traffic was 0 aircraft