[Speech Issue Tower3D Pro]

Ahhh !  Thank you for the quick answer!

[Speech Issue Tower3D Pro]

Does anybody noticed the issue when Airplanes calling the tower they say for example:

Los Angeles Tower, Delta 1234 with you Runway xx

Same at Philadelphia

But in JFK and Las Vegas it is only:

TOWER, Delta 1234 with you Runway xx

 

I'm wondering why is there no Cityname before "Tower" like LAX or PHX!?

 

[Missing 747 Tower3D Pro with RT & RC]

Thank you very much for your help!  I just moved the files to the correct folder and now it works perfect.   So maybe the installer got the wrong folder even if I chose T3D Pro Steam......    

But anyway, thx for all your quick help!!!!

[Missing 747 Tower3D Pro with RT & RC]

The missing A380.........

[Missing 747 Tower3D Pro with RT & RC]

My Version of RT is SP6V7 and for RC SP2V3.  See the file attached where the RC is saved    

Also the A380 is not working, as I just found out when I was looking for another 747..........

[Missing 747 Tower3D Pro with RT & RC]

Hey folks,

I just installed a fresh Tower3D Pro version over Steam.  Tested it to see if the 747 works with LAX = it worked. Installed the actual version of RT and tested again for the 747 = worked well.  Now the big Problem:   installed RC for LAX (of course a fresh download) and the 747 is gone.......    it has become a white twin engine jet.......    What am I doing wrong here?     By the way, the RT works well and the RC colors  working as well with other airlines and planes such as southwest at LAX....        Any suggestions!?

["Change to runway xx" seems not to work]

Sorry, I can't do that, because this forum allows me to upload only 0.02MB.......  

["Change to runway xx" seems not to work]

Hi Ariel, thx for your reply.

The runway is active, yes.  And there are no AC's on it when I try the command!   I have tried it on every session and on various airports (KATL, KLAX, KLAS, KPHL).   It never worked..... 

["Change to runway xx" seems not to work]

Glad to hear that I'm not the only one with this problem!    Maybe it is a bug..... !?  

["Change to runway xx" seems not to work]

Thx for your reply.  

But, I know the command "enter final runway".   I like to use the verbal command "CALLSIGN CHANGE TO RUNWAY XX CLEARED TO LAND"!!!  In Tower2011 and it worked very well on switching parallel runways.   BUT it doesen't work on 3D PRO ..........    The command is listed in the manual, but it won't work.      The benefit of this command is, you can clear the AC in one transmission and switch it to another runway. 

["Change to runway xx" seems not to work]

Hey folks,

I tried to give an AC the "change to runway xx" command in KLAX right after it says "with you" on finals.   For example the AC is on 6R on final and I want him to change to 6L....   It's always "negative"!?????     It always worked with Tower2011 that way?  

Some suggestions?