kyleh
-
Posts
5 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Downloads
Posts posted by kyleh
-
-
Ok Studying the file a bit more. I see that it looks like my CH rudder pedals are joystick 0.
I'm assuming that means these axis were somehow assigned to the rudder pedals?
1=0U,256,D,41,0,0,0 REVERSER1
2=0V,256,D,36,0,0,0 STEERING TILLERI don't know how that would happen as with only 3 axis, shouldn't it only have values X,Y, & Z available?
Maybe my clicking ok in the calibration tab resets the 'focus' for these 2 axis back to the proper FDS-FC1 controller.
-
I do not know why there are duplicates for the reversers1. I did everything through the GUI, I didn't edit the .ini and I don't think I assigned another axis but you never know.
I'll try calibrating everything again as you suggested tonight and see if that fixes it. I had this setup on my old system with WinXP, and never had the ailerons and elevators handled by FSUIPC. I probably did have the throttles and rudder calibrated though.
Thanks Pete
-
When I go into the calibrate tab, the values I set are still there. It just doesn't work unless I actually open the tab and click ok.
Here's the contents of my .ini.
Quote[General]
History=U3F0LR4H3DDYIFN4GHAU6
TCASid=Flight
TCASrange=40
TrafficScanPerFrame=10
AxisCalibration=No
CentredDialogue=Yes
ClearWeatherDynamics=Yes
OwnWeatherChanges=No
WeatherReadInterval=4
MoveBGLvariables=Yes
MainMenu=&Modules
SubMenu=&FSUIPC ...
UpdatedByVersion=3999z9b
WindSmoothing=Yes
AutoTaxiWind=Yes
PropTaxiWind=Yes
TimeSetMode=Partial
WhiteMessages=No
ThrottleSyncAll=No
GraduatedVisibility=Yes
LowerVisAltitude=0
UpperVisAltitude=60000
UpperVisibility=6000
GenerateCirrus=Yes
WindShearSharp=No
UpperWindGusts=No
ExtendMetarMaxVis=Yes
CorrectVSsign=Yes
MouseWheelTrim=No
MouseWheelTrimSpeed=1
BrakeReleaseThreshold=75
AxisInterceptIfDirect=No
DontResetAxes=No
DisconnTrimForAP=No
ZeroElevForAPAlt=No
AutoClearWeather=Yes
ExtendTopWind=Yes
WindSmoothness=5
SmoothPressure=Yes
PressureSmoothness=5
SmoothVisibility=Yes
VisibilitySmoothness=2
MaxSurfaceWind=0
WindLimitLevel=200
WindDiscardLevel=400
WindAjustAltitude=No
WindAjustAltitude=No
MinimumVisibility=0
MaximumVisibilityFewClouds=0
MaximumVisibility=0
MaximumVisibility=0
MaximumVisibility=0
OneCloudLayer=No
ThinClouds=No
ThinThunderClouds=No
CloudThinness=1000
CloudThinness=1000
CloudTurbulence=Yes
CloudTurbulence=Yes
CloudIcing=Yes
CloudIcing=Yes
WindTurbulence=Yes
WindTurbulence=Yes
SuppressAllGusts=No
ExternalOptionControl=Yes
AutoTuneADF=No
KeepFS98CloudCover=No
ShowPMcontrols=No
MagicBattery=No
RudderSpikeRemoval=No
ElevatorSpikeRemoval=No
AileronSpikeRemoval=No
ReversedElevatorTrim=No
StopAutoFuel=No
TrapUserInterrupt=Yes
NavFreq50KHz=No
ClockSync=No
SmoothIAS=Yes
SetVisUpperAlt=No
VisUpperAltLimit=6000
MaxIce=4
MaxIce=3
MinIce=-1
WindSmoothing=Yes
WindSmoothAirborneOnly=No
LimitWindVariance=No
VisSmoothingDelay=0
VisSmoothAirborneOnly=No
TrafficControlDirect=Yes
CloudTurbulence=Yes
CloudTurbulence=Yes
WindTurbulence=Yes
WindTurbulence=Yes
SpoilerIncrement=512
JoystickTimeout=20
PollGFTQ6=Yes
BlankDisplays=No
ZapSound=firework
ShortAircraftNameOk=Substring
UseProfiles=Yes
AxesWrongRange=No
ShowMultilineWindow=Yes
SuppressSingleline=Yes
SuppressMultilineFS=No
FixWindows=No
FixControlAccel=No
TimeForSelect=4
WeatherReadsFast=No
LuaRerunDelay=66
WindAjustAltitudeBy=2000
MaximumVisibilityOvercast=0
MaximumVisibilityRainy=0
ThunderCloudThinness=10000
WindSmoothingDelay=0
SuppressCloudTurbulence=No
SuppressWindTurbulence=No[JoyNames]
AutoAssignLetters=No
1=CH FLIGHT SIM YOKE USB
1.GUID={60EB9430-C3D9-11E6-8003-444553540000}
0=CH PRO PEDALS USB
0.GUID={0CF919B0-C3D9-11E6-8001-444553540000}
2=FDS-FC1
2.GUID={0B4733A0-C6FD-11E6-8001-444553540000}[JoystickCalibration]
AllowSuppressForPFCquad=Yes
ExcludeThrottleSet=Yes
ExcludeMixtureSet=Yes
ExcludePropPitchSet=Yes
SepRevsJetsOnly=No
ApplyHeloTrim=No
UseAxisControlsForNRZ=No
FlapsSetControl=0
FlapDetents=No
ReverserControl=66292
Reverser1Control=66422
Reverser2Control=66425
Reverser3Control=66428
Reverser4Control=66431
MaxThrottleForReverser=256
AileronTrimControl=0
RudderTrimControl=0
CowlFlaps1Control=0
CowlFlaps2Control=0
CowlFlaps3Control=0
CowlFlaps4Control=0
MaxSteerSpeed=60
Spoilers=-11854,-7003,-512,16160
Reverser1=-14624,5622/16
Reverser2=-13056,7324/16
SteeringTiller=-16127,512,1824,16288[Sounds]
Path=F:\FS9\Sound\
Device1=Primary Sound Driver
Device2=Speakers (Realtek High Definition Audio)
Device3=Realtek Digital Output (Realtek High Definition Audio)
Device4=Realtek Digital Output(Optical) (Realtek High Definition Audio)[Buttons]
ButtonRepeat=20,10
2=R1,3,CM1:5,0
3=R1,6,CM1:1,0
4=R1,7,CM1:2,0
5=R1,5,CM1:4,0
6=R1,4,CM1:3,0
7=R1,2,CM1:6,0
8=P1,1,K90,10
9=P0,4,K90,11
10=P0,5,K71,11
11=P0,7,C65752,0
12=P0,18,C65698,0
13=R0,21,CM1:9,0
14=R0,27,CM1:10,0
15=P0,30,C65698,3000
16=P0,12,C65698,6000
17=P0,24,C65698,9000
18=P0,0,C65698,11000
19=P0,6,C65698,15000
20=P0,31,C65698,25000
21=P2,7,C65752,0
22=P2,4,K90,11
23=P2,5,K71,11
24=P2,18,C65698,0
25=P2,30,C65698,3000
26=P2,12,C65698,6000
27=P2,24,C65698,9000
28=P2,0,C65698,11000
29=P2,6,C65698,15000
30=P2,31,C65698,25000
31=P2,3,CM1:11,0
32=P1,0,C1006,1
33=U1,0,C1006,2
34=P2,1,C1006,1
35=U2,1,C1006,2[MacroFiles]
1=767[Axes]
0=0Z,256,D,3,0,0,0
1=0U,256,D,41,0,0,0
2=0V,256,D,36,0,0,0
3=2X,256,D,42,0,0,0
4=2Y,256,D,22,0,0,0
5=2Z,256,D,10,0,0,0
6=2R,256,D,9,0,0,0
7=2U,256,D,41,0,0,0
8=2V,256,D,36,0,0,0[Window.Radar Contact]
Docked=3222, 8994, 3540, 2934
Undocked=4281, 591, 231, 163 -
I'm having an issue where the steering tiller doesn't work on each flight unless I first go into the FSUIPC, tiller axis calibration tab and click ok. It then works fine until I restart flight sim. I don't even have to reset the calibration or anything, just go to the correct tab and click ok.
Details:
- FSUIPC 3.999z9 - registered
- WideFS 6.995 (the tiller is connected to the flight sim machine not on the client)
- Windows7
- FS9.1
- LDS767
Steering Tiller not saving
in FSUIPC Support Pete Dowson Modules
Posted
I was able to fix it by removing the above two lines from the .ini file. It worked fine after that.
I calibrated all the axis afterwards as per your recommendation just to be safe.
Just to be clear, this was a new install on a new pc. I didn't copy over any files from my old system.