[Doors open error]

As you recommended, I have assigned through FSUIPC a command to open each of the doors, I assigned the command Ctrl + Shift + 2 for Toggle Aircraft Exit with parameter 2.  I have done it with the parameter "TimeForSelect "configured for 4, unfortunately it has not worked. Here is the log:

Running inside Prepar3D v4 on Windows 10
Module base=7FF9D0EF0000
  1265906 Ready Flags: Ready-To-Fly=Y, In Menu=N, In Dlg=N
  1265906  READ0[8000]  3304,   4 bytes: 00 00 53 51                                      ..SQ
  1265906  READ0[8000]  3308,   4 bytes: 0C 00 DE FA                                      ....
  1266000  READ0[8000]  330C,   2 bytes: 06 00                                            ..
  1266656 KEYDOWN: VK=16, Waiting=0, Repeat=N, Shifts=1
  1266656 .. Key not programmed -- passed on to FS
  1266813 KEYDOWN: VK=69, Waiting=0, Repeat=N, Shifts=1
  1266813 .. Key not programmed -- passed on to FS
  1266813 *** EVENT: Cntrl= 66389 (0x00010355), Param= 0 (0x00000000) TOGGLE_AIRCRAFT_EXIT
  1266813 *** EVENT: Cntrl= 66514 (0x000103d2), Param= 0 (0x00000000) ATC_MENU_CLOSE
  1266813 *** EVENT: Cntrl= 66514 (0x000103d2), Param= 0 (0x00000000) ATC_MENU_CLOSE
  1266969 KEYUP: VK=69, Waiting=0
  1267000 KEYUP: VK=16, Waiting=0
  1267125 KEYDOWN: VK=50, Waiting=0, Repeat=N, Shifts=0
  1267125 .. Key not programmed -- passed on to FS
  1267125 *** EVENT: Cntrl= 65539 (0x00010003), Param= 0 (0x00000000) SELECT_2
  1267281 KEYUP: VK=50, Waiting=0
  1272828 KEYDOWN: VK=16, Waiting=0, Repeat=N, Shifts=1
  1272828 .. Key not programmed -- passed on to FS
  1273031 KEYDOWN: VK=69, Waiting=0, Repeat=N, Shifts=1
  1273031 .. Key not programmed -- passed on to FS
  1273031 *** EVENT: Cntrl= 66389 (0x00010355), Param= 0 (0x00000000) TOGGLE_AIRCRAFT_EXIT
  1273031 *** EVENT: Cntrl= 66514 (0x000103d2), Param= 0 (0x00000000) ATC_MENU_CLOSE
  1273031 *** EVENT: Cntrl= 66514 (0x000103d2), Param= 0 (0x00000000) ATC_MENU_CLOSE
  1273188 KEYUP: VK=69, Waiting=0
  1273219 KEYUP: VK=16, Waiting=0
  1273375 KEYDOWN: VK=50, Waiting=0, Repeat=N, Shifts=0
  1273375 .. Key not programmed -- passed on to FS
  1273375 *** EVENT: Cntrl= 65539 (0x00010003), Param= 0 (0x00000000) SELECT_2
  1273485 KEYUP: VK=50, Waiting=0
  1278422 KEYDOWN: VK=17, Waiting=0, Repeat=N, Shifts=2
  1278422 .. Key not programmed -- passed on to FS
  1278610 KEYDOWN: VK=16, Waiting=0, Repeat=N, Shifts=3
  1278625 .. Key not programmed -- passed on to FS
  1279047 KEYDOWN: VK=50, Waiting=0, Repeat=N, Shifts=3
  1279047 FS Control Sent: Ctrl=66389, Param=2 TOGGLE_AIRCRAFT_EXIT
  1279047 .. This key is programmed in FSUIPC5 'Keys' options
  1279047 Exception 1 "ERROR", Ref 3387, Index param 2 on TransmitClientEvent, object=1, id=66389 (TOGGLE_AIRCRAFT_EXIT), data=2
  1279266 KEYUP: VK=50, Waiting=0
  1279344 KEYUP: VK=16, Waiting=0
  1279344 KEYUP: VK=17, Waiting=0
  1281031 KEYDOWN: VK=18, Waiting=0, Repeat=N, Shifts=4
  1281031 .. Key not programmed -- passed on to FS
  1281125 Deactivated for PID=2496, "explorer.exe"
  1281141 Lost focus to PID=2496, "explorer.exe"
 

[Doors open error]

12 hours ago, Pete Dowson said:

Ah, so, you only worked out that it was related to FSUIPC recently?  And is that why you didn't report it a year ago?

Exactly sorry if I didn't express myself correctly from the start.

12 hours ago, Pete Dowson said:

Can you try without GSX and Accu-Feel please?

I deactivate Accu-Feel, GSX and also SODE that I forgot to mention but nothing changed, I was still experiencing the same error, this time I tried with default aircraft.

12 hours ago, Pete Dowson said:

Did you yet try the two alternatives I suggested? did you try changing the TimeForSelect parameter as I also suggested. Unless you do try what i ask I really can't see any way to help you!

As you advised me I did, but I have not obtained any results either.

Honestly this error puzzles me more and more, is it possible to make FSUIP have no command assigned? I mean I wish that all he does is read data and parameters of the simulator (which is really what interests me). I think the problem is that although there is no command assigned to close the ATC menu in the simulator, FSUIPC does have it in its registry and that is why I have this error (it is an assumption because I do not understand this).

 

Because I do not understand this error considering that in case it was due to that I deleted the assignment to close the ATC menu, which did not solve anything, I also tried to assign a very different command to the one that open the doors.

779750 *** EVENT: Cntrl= 66514 (0x000103d2), Param= 0 (0x00000000) ATC_MENU_CLOSE
 779750 *** EVENT: Cntrl= 66514 (0x000103d2), Param= 0 (0x00000000) ATC_MENU_CLOSE

Diego

[Doors open error]

1 hour ago, Pete Dowson said:

so, you experienced an error 'related to fSUIPC', but did not know it was an error? that doesn't make sense.

Yes, I knew it was a FSUIPC error because when I started experiencing it, I formatted the computer and retested one by one the addons that I had with a default airplane, the only addon that I had the problem with was FSUIPC.

 

2 hours ago, Pete Dowson said:

That's very strange. what add-ons are you running apart from FSUIPC?

I use addons like Accu-Feel from A2A, GSX (V1 and V2), Active Sky + ASCA, envtex, ORBX and the rest are scenery and airplanes.

 

I have remembered that with the first versions of FSUIPC for P3Dv4 I had no problem since I remember using the QW 787 without problems with the doors. I understand it's a very strange error but I greatly appreciated if you could help me.

Diego

[Doors open error]

Hi Pete,
Sorry for the late reply, but he has been very busy these past few days. In response to your first question, I did not report the error because as I am studying the ATPL I only flew small aircraft to practice procedures, which only have one door and made me unaware of the error.

I have done everything that has been indicated to me, however nothing has solved the error, although fortunately thanks to it I have been able to at least locate the error (until now I did not know why it was) and that is when I have FSUIPC activated, at the moment opening door 2 of the plane for example the following occurs:

   779750 *** EVENT: Cntrl= 66389 (0x00010355), Param= 0 (0x00000000) TOGGLE_AIRCRAFT_EXIT
   779750 *** EVENT: Cntrl= 66514 (0x000103d2), Param= 0 (0x00000000) ATC_MENU_CLOSE
   779750 *** EVENT: Cntrl= 66514 (0x000103d2), Param= 0 (0x00000000) ATC_MENU_CLOSE
   779750 *** EVENT: Cntrl= 65539 (0x00010003), Param= 0 (0x00000000) SELECT_2

also happens with any other door:

   800031 *** EVENT: Cntrl= 66389 (0x00010355), Param= 0 (0x00000000) TOGGLE_AIRCRAFT_EXIT
   800031 *** EVENT: Cntrl= 66514 (0x000103d2), Param= 0 (0x00000000) ATC_MENU_CLOSE
   800031 *** EVENT: Cntrl= 66514 (0x000103d2), Param= 0 (0x00000000) ATC_MENU_CLOSE
   800031 *** EVENT: Cntrl= 65541 (0x00010005), Param= 0 (0x00000000) SELECT_4

 

I don't understand very well about this, but I think I understand that the error is that the command ATC_MENU_CLOSE blocks the select for each command to open the door. I am attaching the log so you can see it, the command is registered in line 828. I hope you can help me solve this problem.

Diego

 

Log (was to heavy to uploaded here):https://easyupload.io/v0jgte

[Doors open error]

Hi John,

So sorry for posting in the wrong place, any way to move the post?. My simulator is Prepar3D v4.5, it happens with Fsuipc 5 (all versions) and Fsuipc 6 with all the aircrafts (default and payware) actually I dont have anything assigned in Fsuipc.

There are only a few exceptions, pmdg planes and aerosoft ones, I think they use their own custom doors comands. 

FSUIPC6.ini FSUIPC6.log

[Doors open error]

*** Posted in Download Links - please post support requests in the main Support Forum ***

Hello,
For a year I have been experiencing a problem related to Fsuipc when opening the doors of the plane, I know that the error is due to fsuipc because if I uninstall fsuipc, the error disappears.

The error is that despite being able to open different doors of the airplane (for example the QW 787) through the menu or the keyboard commands, only the first door opens despite having selected any other.

Hope you can help me

Diego