Marty

I’m not real keen at this time to upgrade Prosim a little weary after this upgrade I will look into it. But I would have to install across 4 pc etc with mcp EFIS and displays running I would hate to upset those. At this time Prosim detects the throttle but I can’t calibrate or assign I really haven’t spent any time on Prosim I wanted to upgrade software before making switch and gauge assignments. I think the sdk is a little out of depth for the moment I understand the principle but I don’t intend on writing programmes I’m still trying to work out SIOC scripting. I will re calibrate the throttles, speed brake and ailerons. The ailerons appear easy but throttles a little different as well as speed brake have looked at some videos and the user manual but appreciate any advice here.

Before your suggested changes there was no recognition of the throttles flaps and speed brake in fsuicp now the movements are seen in axis assignments.

I tried calibrating throttles in Prosim but the MCP module is running on the slave Prosim recommends running on flight sim pc. I tried calibrating on MCP module on flight sim pc but did not recognise will have to do more research I think I will calibrate in fsuicp as originally was

I made johns changes to the ini file and fsuicp is now seeing the throttles speed brake and flaps is there any way to load the old assignments or will I have to re calibrate from scratch.

What does FSUICP SDK do? I’m trying to learn about offsets does this have something to do with that?

i found the joyscan.csv file attached i will wait for a response before making johns changes. Im thinking I might use prosim for the throttles as u do i never gave it much thought looks like iam going to have to re config the whole throttle anyway so start afresh. With the sim i want to keep it as close to real 737 800 as i can to mimic real world cockpit. Im still looking at software but for now orbx for scenery mainly airport scenery in australia and AI ATC like vox i will use vatsim and IVAO but i dont want to bod down the sim to much with software.

Good?, flags, VID, PID, Name, INIid, REGid, RegEntry, INIguid, REGguid, HIDguid, ValsOK?, ReadsOk? ,,, HIDscanning completed N, x00, x06A3, x0763, , -1, -1, 0, {NULL}, {NULL}, {E98E5CA0-5C91-11E1-8006-444553540000}, Y, N N, x00, x06A3, x0763, , -1, -1, 0, {NULL}, {NULL}, {E98E5CA0-5C91-11E1-8005-444553540000}, Y, N N, x00, x16C0, x05BA, , -1, -1, 0, {NULL}, {NULL}, {8C6FD830-FE13-11E2-8001-444553540000}, Y, N N, x00, x16C0, x2786, , -1, -1, 0, {NULL}, {NULL}, {6368B4F0-476D-11E2-8001-444553540000}, Y, N N, x00, x16C0, x2786, , -1, -1, 0, {NULL}, {NULL}, {E98E5CA0-5C91-11E1-8009-444553540000}, Y, N ,,, REGscanning completed N, x00, x06A3, x0763, Saitek Pro Flight Rudder Pedals, -1, 1, 1, {NULL}, {E98E5CA0-5C91-11E1-8006-444553540000}, {E98E5CA0-5C91-11E1-8006-444553540000}, Y, Y N, x00, x06A3, x0763, Saitek Pro Flight Rudder Pedals, -1, 4, 0, {NULL}, {E98E5CA0-5C91-11E1-8005-444553540000}, {E98E5CA0-5C91-11E1-8005-444553540000}, Y, Y N, x00, x16C0, x05BA, BU0836A Interface, -1, 0, 0, {NULL}, {8C6FD830-FE13-11E2-8001-444553540000}, {8C6FD830-FE13-11E2-8001-444553540000}, Y, Y N, x00, x16C0, x2786, 737YOKE-LE by ACE, -1, 2, 1, {NULL}, {6368B4F0-476D-11E2-8001-444553540000}, {6368B4F0-476D-11E2-8001-444553540000}, Y, Y N, x00, x16C0, x2786, 737YOKE-LE by ACE, -1, 3, 0, {NULL}, {E98E5CA0-5C91-11E1-8009-444553540000}, {E98E5CA0-5C91-11E1-8009-444553540000}, Y, Y ,,, User settings imported N, x00, x06A3, x0763, Saitek Pro Flight Rudder Pedals, 1, 1, 1, {E98E5CA0-5C91-11E1-8006-444553540000}, {E98E5CA0-5C91-11E1-8006-444553540000}, {E98E5CA0-5C91-11E1-8006-444553540000}, Y, Y N, x00, x06A3, x0763, Saitek Pro Flight Rudder Pedals, 4, 4, 0, {E98E5CA0-5C91-11E1-8005-444553540000}, {E98E5CA0-5C91-11E1-8005-444553540000}, {E98E5CA0-5C91-11E1-8005-444553540000}, Y, Y N, x00, x16C0, x05BA, BU0836A Interface, 0, 0, 0, {8C6FD830-FE13-11E2-8001-444553540000}, {8C6FD830-FE13-11E2-8001-444553540000}, {8C6FD830-FE13-11E2-8001-444553540000}, Y, Y N, x00, x16C0, x2786, 737YOKE-LE by ACE, 2, 2, 1, {6368B4F0-476D-11E2-8001-444553540000}, {6368B4F0-476D-11E2-8001-444553540000}, {6368B4F0-476D-11E2-8001-444553540000}, Y, Y N, x00, x16C0, x2786, 737YOKE-LE by ACE, 3, 3, 0, {E98E5CA0-5C91-11E1-8009-444553540000}, {E98E5CA0-5C91-11E1-8009-444553540000}, {E98E5CA0-5C91-11E1-8009-444553540000}, Y, Y ,,, Values matched and decided Y, x1E, x06A3, x0763, Saitek Pro Flight Rudder Pedals, 1, 1, 1, {E98E5CA0-5C91-11E1-8006-444553540000}, {E98E5CA0-5C91-11E1-8006-444553540000}, {E98E5CA0-5C91-11E1-8006-444553540000}, Y, Y Y, x1E, x06A3, x0763, Saitek Pro Flight Rudder Pedals, 4, 4, 0, {E98E5CA0-5C91-11E1-8005-444553540000}, {E98E5CA0-5C91-11E1-8005-444553540000}, {E98E5CA0-5C91-11E1-8005-444553540000}, Y, Y Y, x1E, x16C0, x05BA, BU0836A Interface, 0, 0, 0, {8C6FD830-FE13-11E2-8001-444553540000}, {8C6FD830-FE13-11E2-8001-444553540000}, {8C6FD830-FE13-11E2-8001-444553540000}, Y, Y Y, x1E, x16C0, x2786, 737YOKE-LE by ACE, 2, 2, 1, {6368B4F0-476D-11E2-8001-444553540000}, {6368B4F0-476D-11E2-8001-444553540000}, {6368B4F0-476D-11E2-8001-444553540000}, Y, Y Y, x1E, x16C0, x2786, 737YOKE-LE by ACE, 3, 3, 0, {E98E5CA0-5C91-11E1-8009-444553540000}, {E98E5CA0-5C91-11E1-8009-444553540000}, {E98E5CA0-5C91-11E1-8009-444553540000}, Y, Y

The throttles are connected via USB to the server pc the park brake lever led light to the slave pc via a bodner board. The USB connection has not been changed on the server pc for the throttle I will look again tomorrow for the joystick file. It was not in the module folder but I will check again to be absolutely sure. Prosim is v1.45 I was going to upgrade that but after this I think I’ll give it a miss. The bodner card is connected to the slave pc only and not the server. The only change other than the prepar upgrade was fsuicpv5 and the accidental upgrade to windows on the slave pc the bodner card is connected to. I disconnected the firewall and just to be sure made sure the wide client was in the firewall accepted programmes. I will implement johns changes tomorrow and c how things go. Thank you for the support thus far

The joyscan.csv file is not in that folder I have looked around but can’t locate it. I dont recall it ever being there. I will make your changes the throttle quad is connected to the server pc via USB (pc prepar is located) there is a wire connection to the Bodnar interface card I have looked at this and it is I presume the park brake LED light. There is an SIOC script for park brake light I’m assuming when it is on the light goes on the Bodnar card is connected to the slave pc where SIOC server is located. I’m assuming Prosim and fsuicpv5 communicate via widefs but having trouble with connection. The firewall is turned off on all pc and just to be sure I made sure the wide client 9Now the slave had firewall permission i can’t see how the throttle is connected to the Bodnar card and it was running via fsuicp before the changes

oh if i move throttles in prosim they show as as the interface card as well with heap of numbers

********* WideServer.DLL Log [version 7.076] ********* Blocksize guide = 8192 (double allowed) Date (dmy): 07/07/19, Time 20:44:04.710: Server name is MASTER11 15662 Initialising TCP/IP server 15662 Initialising UDP/IP server 26816 Auto send for 0 stopped before sending all data (0 of 47 sent), Error=10013 (IP=255.255.255.255) UDP 33540 Close signalled to clients

********* WideServer.DLL Log [version 7.076] ********* Blocksize guide = 8192 (double allowed) Date (dmy): 07/07/19, Time 21:17:29.187: Server name is MASTER11 15085 Initialising TCP/IP server 15085 Initialising UDP/IP server 17082 Connected to computer "SLAVE14" running WideClient version 6.860 (IP=192.168.15.120) UDP 726028 Auto send for 0 stopped before sending all data (0 of 47 sent), Error=10013 (IP=255.255.255.255) UDP 732549 Close signalled to clients 733657 Closing down now ... Memory managed: Offset records: 244 alloc, 242 free Read buffer usage: 6932 alloc, 6932 free, max in session: 1 Write buffer usage: 31690 alloc, 31690 free, max in session: 1 Throughput maximum achieved: 20 frames/sec, 789 bytes/sec Throughput average achieved for complete session: 4 frames/sec, 137 bytes/sec Average receive rate from "SLAVE14": 9 frames/sec, 552 bytes/sec ********* Log file closed *********

where would i find joyscan.csv

General] UpdatedByVersion=5151 History=ZHLS0H8HHGK4K0GRY3WHE MouseWheelMove=No MouseWheelTrim=No MouseWheelTrimSpeed=1 JoystickTimeout=20 PollGFTQ6=Yes BlankDisplays=No FixMachSpeedBug=No AutoScanDevices=Yes VisibilityOptions=No OneCloudLayer=No CloudTurbulence=No CloudIcing=No GenerateCirrus=No SuppressCloudTurbulence=No MaxIce=-4 MinIce=-4 UpperWindGusts=No SuppressWindTurbulence=No SuppressWindVariance=No WindTurbulence=No TurbulenceRate=1.0,5.0 TurbulenceDivisor=20,20,40,40 SuppressAllGusts=No MaxSurfaceWind=0 WindLimitLevel=200 WindDiscardLevel=400 WindAjustAltitude=No WindAjustAltitudeBy=2000 SmoothBySimTime=No WindSmoothing=No WindSmoothness=2 WindSmoothAirborneOnly=Yes PressureSmoothness=0 TemperatureSmoothness=0 DisconnTrimForAP=No ZeroElevForAPAlt=No ThrottleSyncAll=No WhiteMessages=No ShowPMcontrols=No SpoilerIncrement=512 MagicBattery=No RudderSpikeRemoval=No ElevatorSpikeRemoval=No AileronSpikeRemoval=No ReversedElevatorTrim=No ClockSync=No ClockSyncMins=5 ClearWeatherDynamics=No OwnWeatherChanges=No TimeForSelect=4 LoadFlightMenu=No LoadPlanMenu=No PauseAfterCrash=No BrakeReleaseThreshold=75 SaveDataWithFlights=No ZapSound=firework ShortAircraftNameOk=No UseProfiles=Yes EnableMouseLook=No AxesWrongRange=No TCASid=Flight TCASrange=40 AxisCalibration=No DirectAxesToCalibs=No ShowMultilineWindow=Yes SuppressSingleline=No SuppressMultilineFS=No AxisIntercepts=No DontResetAxes=No InitDelay=0 GetNearestAirports=Yes WeatherReadFactor=2 WeatherRewriteSeconds=1 LuaRerunDelay=66 Console=No OOMcheck=Yes InitDelayDevicesToo=No PMDG737offsets=Auto PMDG747offsets=Auto PMDG777offsets=Auto Annotate=Yes UseSystemTime=No UseMidMouseBtn=Yes RestoreSimcWindows=No DelayedMouseLookZoom=No WideLuaGlobals=Yes TextFileMaxRead=4095 TextFileNumbers=Yes TextFilePhonetics=Yes ThreadAffinityMask=x0 LuaAffinityMask=x0 LogOptionProtect=Yes TimeForLuaClosing=2 TrafficStallTime=1 InitialStallTime=10 NormalStallTime=1 ComReadLoopTime=20 DebugLua=Yes FSVersionUsed="Lockheed Martin® Prepar3D® v4",4.5.12.30293 SimConnectUsed=4.5.0.0 LogWeather=Yes LogWrites=Yes LogReads=Yes LogEvents=Yes LogLua=Yes LogAxes=Yes LogButtonsKeys=Yes LogExtras=Yes [JoyNames] AutoAssignLetters=No T=G-Throttles << MISSING JOYSTICK >> T.GUID={048B2C90-D690-11E1-8001-444553540000} B=BU0836X Interface << MISSING JOYSTICK >> B.GUID={8C6FD830-FE13-11E2-8001-444553540000} R=Saitek Pro Flight Rudder Pedals R.GUID={E98E5CA0-5C91-11E1-8006-444553540000} S=Saitek Pro Flight Rudder Pedals S.GUID={E98E5CA0-5C91-11E1-8005-444553540000} Z=737YOKE-LE by ACE Z.GUID={6368B4F0-476D-11E2-8001-444553540000} Y=737YOKE-LE by ACE Y.GUID={E98E5CA0-5C91-11E1-8009-444553540000} 1=Saitek Pro Flight Rudder Pedals 1.GUID={E98E5CA0-5C91-11E1-8006-444553540000} 2=737YOKE-LE by ACE 2.GUID={6368B4F0-476D-11E2-8001-444553540000} 3=737YOKE-LE by ACE 3.GUID={E98E5CA0-5C91-11E1-8009-444553540000} 4=Saitek Pro Flight Rudder Pedals 4.GUID={E98E5CA0-5C91-11E1-8005-444553540000} 0=BU0836A Interface 0.GUID={8C6FD830-FE13-11E2-8001-444553540000} A=BU0836A Interface A.GUID={8C6FD830-FE13-11E2-8001-444553540000} [Buttons] ButtonRepeat=20,10 13=P64,0,C66072,0 -{PITOT_HEAT_ON}- 14=U64,0,C66073,0 -{PITOT_HEAT_OFF}- 15=P64,1,C65591,0 -{SITUATION_RESET}- 16=P64,24,C65733,0 -{ABORT}- 17=P64,25,Cx02003320,xABCD -{offset word set, offset 3320}- 21=PT,0,Cx02000BC8,x0007 22=UT,0,Cx02000BC8,x0000 23=RT,3,C65602,0 24=UT,3,C65697,0 25=PB,0,Cx02000BC8,x0007 26=UB,0,Cx02000BC8,x0000 27=PB,1,C66079,0 28=PB,2,C66080,0 29=RB,3,C65607,0 30=RB,4,C65615,0 31=PB,5,Cx02007370,x003C 32=RY,1,C65607,0 -{ELEV_TRIM_DN}- 33=RY,0,C65615,0 -{ELEV_TRIM_UP}- 34=RZ,1,C65607,0 -{ELEV_TRIM_DN}- 35=RZ,0,C65615,0 -{ELEV_TRIM_UP}- 36=PZ,4,C65561,0 -{PAUSE_TOGGLE}- PollInterval=25 [AutoSave] Next=1 Interval=60 Files=10 SaveOnGround=No AutoSaveEnabled=No [GPSout] GPSoutEnabled=No [GPSout2] GPSoutEnabled=No [WideServer] WideFSenabled=Yes AdvertiseService=No Port=8002 Port2=9002 ProtocolPreferred=UDP AllowShutdown=Yes [Sounds] Path=D:\fsx\Sound\ Device1=Primary Sound Driver Device2=Speakers (Realtek High Definition Audio) Device3=Realtek Digital Output (Realtek High Definition Audio) Device4=MX613ST-4 (NVIDIA High Definition Audio) Device5=MX613ST-0 (NVIDIA High Definition Audio) Device6=MX613ST-C (NVIDIA High Definition Audio) [Axes] 0=TX,256,D,9,0,0,0 1=TY,256,D,10,0,0,0 2=TZ,256,D,23,0,0,0 3=TU,256,D,22,0,0,0 PollInterval=10 RangeRepeatRate=10 4=RX,256,D,7,0,0,0 -{ DIRECT: LeftBrake }- 5=RY,256,D,8,0,0,0 -{ DIRECT: RightBrake }- 6=RR,256,D,3,0,0,0 -{ DIRECT: Rudder }- 7=ZX,256,D,1,0,0,0 -{ DIRECT: Aileron }- 8=ZY,256,D,2,0,0,0 -{ DIRECT: Elevator }- 9=YX,256,D,1,0,0,0 -{ DIRECT: Aileron }- 10=YY,256,D,2,0,0,0 -{ DIRECT: Elevator }- 11=SX,256,D,7,0,0,0 -{ DIRECT: LeftBrake }- 12=SY,256,D,8,0,0,0 -{ DIRECT: RightBrake }- 13=SR,256,D,3,0,0,0 -{ DIRECT: Rudder }- [ClientNames] 1=SLAVE12 2=SLAVE13 3=SLAVE14 [JoystickCalibration] AllowSuppressForPFCquad=Yes ExcludeThrottleSet=Yes ExcludeMixtureSet=Yes ExcludePropPitchSet=Yes SepRevsJetsOnly=No ApplyHeloTrim=No UseAxisControlsForNRZ=No FlapsSetControl=0 FlapDetents=Yes ReverserControl=66292 Reverser1Control=66422 Reverser2Control=66425 Reverser3Control=66428 Reverser4Control=66431 MaxThrottleForReverser=256 AileronTrimControl=66731 RudderTrimControl=66732 CowlFlaps1Control=66162 CowlFlaps2Control=66163 CowlFlaps3Control=66164 CowlFlaps4Control=66165 SteeringTillerControl=0 MaxSteerSpeed=60 LeftBrake=-16380,16380/16 RightBrake=-16380,16380/16 FlapStarts=-16384,-13765,-9239,-6209,-2020,336,6755,10375,11868 Flaps=-16384,16380 FlapEnds=-14027,-10025,-7032,-3553,75,4292,10226,11607,13137 RudderBlendLowest=1 Throttle1=-16380,-512,512,16380 Throttle=-16380,16380 [Traffic Limiter] AirportPreference=50 PlannedAirportsPreference=50 GroundPreference=50 NearerPreference=50 TargetFrameRate=0 TrafficLimit=0 [Monitor] Display=15

********* FSUIPC5, Version 5.151 (21st February 2019) by Pete Dowson ********* Running inside Prepar3D v4 Module base=7FED9920000 Windows 7 Home Premium 64 Bit with SP 1.0 reported as Build 7601 (OS 6.1) Prepar3D.exe version = 4.5.12.30293 Reading options from "C:\Program Files\Lockheed Martin\Prepar3D v4\Modules\FSUIPC5.ini" Checking the Registrations now ... User Name="MARTYN DAVIS" User Addr="marty.davis71@gmail.com" FSUIPC5 Key is provided WideFS7 Key is provided 0 System time = 07/07/2019 20:43:10 0 FLT UNC path = "C:\Users\sim\Documents\Prepar3D v4 Files\" 16 Using DialogMode 16 FS UNC path = "C:\Program Files\Lockheed Martin\Prepar3D v4\" 156 ---------------------- Joystick Device Scan ----------------------- 156 Product= Saitek Pro Flight Rudder Pedals 156 Manufacturer= Saitek 156 Vendor=06A3, Product=0763 (Version 1.0) 156 GUIDs returned for product: VID_06A3&PID_0763: 156 GUID= {E98E5CA0-5C91-11E1-8006-444553540000} 156 Details: Btns=0, POVs=(0, 0, 0, 0), Cal=x00000000, Max=R511,U0,V0,X127,Y127,Z0 156 GUID= {E98E5CA0-5C91-11E1-8005-444553540000} 156 Details: Btns=0, POVs=(0, 0, 0, 0), Cal=x00000000, Max=R511,U0,V0,X127,Y127,Z0 172 Product= Saitek Pro Flight Rudder Pedals 172 Manufacturer= Saitek 172 Vendor=06A3, Product=0763 (Version 1.0) 172 Product= BU0836A Interface 172 Manufacturer= Leo Bodnar 172 Serial Number= B31362 172 Vendor=16C0, Product=05BA (Version 1.34) 172 GUIDs returned for product: VID_16C0&PID_05BA: 172 GUID= {8C6FD830-FE13-11E2-8001-444553540000} 172 Details: Btns=32, POVs=(0, 0, 0, 0), Cal=x00000000, Max=R3970,U3970,V3980,X0,Y0,Z3661 172 Product= 737YOKE-LE by ACE 172 Manufacturer= ACE 172 Serial Number= A18593 172 Vendor=16C0, Product=2786 (Version 1.35) 172 GUIDs returned for product: VID_16C0&PID_2786: 172 GUID= {6368B4F0-476D-11E2-8001-444553540000} 172 Details: Btns=32, POVs=(0, 0, 0, 0), Cal=x00000000, Max=R0,U0,V0,X2822,Y2739,Z0 172 GUID= {E98E5CA0-5C91-11E1-8009-444553540000} 172 Details: Btns=32, POVs=(0, 0, 0, 0), Cal=x00000000, Max=R0,U0,V0,X2860,Y2950,Z0 172 Product= 737YOKE-LE by ACE 172 Manufacturer= ACE 172 Serial Number= A23813 172 Vendor=16C0, Product=2786 (Version 1.35) 172 ------------------------------------------------------------------- 172 Device acquired for use: 172 Joystick ID = 1 (Registry okay) 172 1=Saitek Pro Flight Rudder Pedals 172 1.GUID={E98E5CA0-5C91-11E1-8006-444553540000} 172 Device acquired for use: 172 Joystick ID = 4 (Registry okay) 172 4=Saitek Pro Flight Rudder Pedals 172 4.GUID={E98E5CA0-5C91-11E1-8005-444553540000} 172 Device acquired for use: 172 Joystick ID = 0 (Registry okay) 172 0=BU0836A Interface 172 0.GUID={8C6FD830-FE13-11E2-8001-444553540000} 172 Device acquired for use: 172 Joystick ID = 2 (Registry okay) 172 2=737YOKE-LE by ACE 172 2.GUID={6368B4F0-476D-11E2-8001-444553540000} 172 Device acquired for use: 172 Joystick ID = 3 (Registry okay) 172 3=737YOKE-LE by ACE 172 3.GUID={E98E5CA0-5C91-11E1-8009-444553540000} 172 ------------------------------------------------------------------- 188 LogOptions=00000000 00000001 188 ------------------------------------------------------------------- 188 SimConnect_Open succeeded: waiting to check version okay 188 Opened separate AI Traffic client okay 188 ### PDKmodeHelper callback registered 2434 Running in "Lockheed Martin® Prepar3D® v4", Version: 4.5.12.30293 (SimConnect: 4.5.0.0) 2434 Initialising SimConnect data requests now 2434 FSUIPC Menu entry added 2434 ... Using Prepar3D with Professional License 2450 C:\Users\sim\Documents\Prepar3D v4 Files\Prepar3D_Default.fxml 2450 C:\Program Files\Lockheed Martin\Prepar3D v4\SimObjects\Airplanes\Prosim 737-800 Regular\Prosim738.air 32417 ### The user object is 'Prosim_737_800_Winglets_Prosim_Livery' 32417 ### Mode is NORMAL 33182 ### Mode: PAUSE on 45677 Loading Complete ... 45709 ### Mode is NORMAL 48017 Aircraft loaded: running normally now ... 48142 User Aircraft ID 2 supplied, now being used 48298 System time = 07/07/2019 20:43:58, Simulator time = 14:02:28 (05:02Z) 48298 Aircraft="Prosim_737_800_Winglets_Prosim_Livery" 54445 -------------------- Starting everything now ---------------------- 54445 Starting WideServer now ... 55958 Advanced Weather Interface Enabled 69046 Sim stopped: average frame rate for last 20 secs = 4.5 fps 69046 Max AI traffic was 0 aircraft 69046 ------------------------------------------------------------------- 70357 === Closing session: waiting for DLLStop to be called ... 78687 === DLLStop called ... 78687 === Closing external processes we started ... 79686 === About to kill any Lua plug-ins still running ... 79842 === Closing global Lua thread 80856 === About to kill my timers ... 81058 === Restoring window procs ... 81058 === Unloading libraries ... 81058 === stopping other threads ... 81058 === ... Button scanning ... 81152 === ... Axis scanning ... 81261 === Releasing joystick devices ... 81261 === Freeing macro memory 81261 === Removing any offset overrides 81261 === Closing all WideFS threads 81261 TransmitClientEvent failed! 81261 TransmitClientEvent failed! 81433 TransmitClientEvent failed! 81433 TransmitClientEvent failed! 81495 TransmitClientEvent failed! 81495 TransmitClientEvent failed! 81604 TransmitClientEvent failed! 81604 TransmitClientEvent failed! 81714 TransmitClientEvent failed! 81714 TransmitClientEvent failed! 81823 TransmitClientEvent failed! 81823 TransmitClientEvent failed! 81932 TransmitClientEvent failed! 81932 TransmitClientEvent failed! 82041 TransmitClientEvent failed! 82041 TransmitClientEvent failed! 82150 TransmitClientEvent failed! 82150 TransmitClientEvent failed! 82260 TransmitClientEvent failed! 82260 TransmitClientEvent failed! 82369 TransmitClientEvent failed! 82369 TransmitClientEvent failed! 82494 TransmitClientEvent failed! 82494 TransmitClientEvent failed! 82587 TransmitClientEvent failed! 82587 TransmitClientEvent failed! 82696 TransmitClientEvent failed! 82696 TransmitClientEvent failed! 82806 TransmitClientEvent failed! 82806 TransmitClientEvent failed! 82915 TransmitClientEvent failed! 82915 TransmitClientEvent failed! 83024 TransmitClientEvent failed! 83024 TransmitClientEvent failed! 83133 TransmitClientEvent failed! 83133 TransmitClientEvent failed! 83242 TransmitClientEvent failed! 83242 TransmitClientEvent failed! 83352 TransmitClientEvent failed! 83352 TransmitClientEvent failed! 83461 TransmitClientEvent failed! 83461 TransmitClientEvent failed! 83586 TransmitClientEvent failed! 83586 TransmitClientEvent failed! 83679 TransmitClientEvent failed! 83679 TransmitClientEvent failed! 83788 TransmitClientEvent failed! 83788 TransmitClientEvent failed! 83898 TransmitClientEvent failed! 83898 TransmitClientEvent failed!