Marty
-
Posts
33 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Downloads
Posts posted by Marty
-
-
12 hours ago, John Dowson said:
The SDK is the 'Software Development Kit', which allows you to write programs (in various languages) that communicate with FSUIPC (i.e. read/write offsets).
The changes did not allow you to see the throttles! They only put back your previous assignments/calibration to that device. If that worked, then you must have been able to see this before, they just weren't assigned.
Well, what you have now is all your old assignments back from your old ini, or thats what I thought! Looking at your ini, it looks like you have your flaps and toe brakes calibrated:
LeftBrake=-16380,16380/16
RightBrake=-16380,16380/16
FlapStarts=-16384,-13765,-9239,-6209,-2020,336,6755,10375,11868
Flaps=-16384,16380
FlapEnds=-14027,-10025,-7032,-3553,75,4292,10226,11607,13137But no calibration for your ailerons, elevator, throttle, etc, so you will need to calibrate them (especially if you are sending to FSUIPC for calibration).
Then again, if you are going to upgrade ProSim, you will probably be better off assigning and calibrating there, as Pete suggested.
It is recommended to run on the flight sim pc to avoid delays caused by network latency, although it should still work running on the slave.
Before your suggested changes there was no recognition of the throttles flaps and speed brake in fsuicp now the movements are seen in axis assignments.
-
I tried calibrating throttles in Prosim but the MCP module is running on the slave Prosim recommends running on flight sim pc. I tried calibrating on MCP module on flight sim pc but did not recognise will have to do more research I think I will calibrate in fsuicp as originally was
-
I made johns changes to the ini file and fsuicp is now seeing the throttles speed brake and flaps is there any way to load the old assignments or will I have to re calibrate from scratch.
-
1 hour ago, John Dowson said:
Your joyscan.csv file shows the device BU0836A Interface is recognised and matches you log and ini, so this must be your throttle device - please go ahead and make the suggested changes. I'm not sure if this will work though, as you cannot see the axis value change (in the axis assignment tab) when this is unassigned, which is strange.
You could also try downloading the HiDScanner utility - from
Run this and move the throttle to see if any axis values are changed (and post the log).
What does FSUICP SDK do? I’m trying to learn about offsets does this have something to do with that?
-
i found the joyscan.csv file attached i will wait for a response before making johns changes. Im thinking I might use prosim for the throttles as u do i never gave it much thought looks like iam going to have to re config the whole throttle anyway so start afresh.
With the sim i want to keep it as close to real 737 800 as i can to mimic real world cockpit. Im still looking at software but for now orbx for scenery mainly airport scenery in australia and AI ATC like vox i will use vatsim and IVAO but i dont want to bod down the sim to much with software.
-
Good?, flags, VID, PID, Name, INIid, REGid, RegEntry, INIguid, REGguid, HIDguid, ValsOK?, ReadsOk?
,,, HIDscanning completed
N, x00, x06A3, x0763, , -1, -1, 0, {NULL}, {NULL}, {E98E5CA0-5C91-11E1-8006-444553540000}, Y, N
N, x00, x06A3, x0763, , -1, -1, 0, {NULL}, {NULL}, {E98E5CA0-5C91-11E1-8005-444553540000}, Y, N
N, x00, x16C0, x05BA, , -1, -1, 0, {NULL}, {NULL}, {8C6FD830-FE13-11E2-8001-444553540000}, Y, N
N, x00, x16C0, x2786, , -1, -1, 0, {NULL}, {NULL}, {6368B4F0-476D-11E2-8001-444553540000}, Y, N
N, x00, x16C0, x2786, , -1, -1, 0, {NULL}, {NULL}, {E98E5CA0-5C91-11E1-8009-444553540000}, Y, N
,,, REGscanning completed
N, x00, x06A3, x0763, Saitek Pro Flight Rudder Pedals, -1, 1, 1, {NULL}, {E98E5CA0-5C91-11E1-8006-444553540000}, {E98E5CA0-5C91-11E1-8006-444553540000}, Y, Y
N, x00, x06A3, x0763, Saitek Pro Flight Rudder Pedals, -1, 4, 0, {NULL}, {E98E5CA0-5C91-11E1-8005-444553540000}, {E98E5CA0-5C91-11E1-8005-444553540000}, Y, Y
N, x00, x16C0, x05BA, BU0836A Interface, -1, 0, 0, {NULL}, {8C6FD830-FE13-11E2-8001-444553540000}, {8C6FD830-FE13-11E2-8001-444553540000}, Y, Y
N, x00, x16C0, x2786, 737YOKE-LE by ACE, -1, 2, 1, {NULL}, {6368B4F0-476D-11E2-8001-444553540000}, {6368B4F0-476D-11E2-8001-444553540000}, Y, Y
N, x00, x16C0, x2786, 737YOKE-LE by ACE, -1, 3, 0, {NULL}, {E98E5CA0-5C91-11E1-8009-444553540000}, {E98E5CA0-5C91-11E1-8009-444553540000}, Y, Y
,,, User settings imported
N, x00, x06A3, x0763, Saitek Pro Flight Rudder Pedals, 1, 1, 1, {E98E5CA0-5C91-11E1-8006-444553540000}, {E98E5CA0-5C91-11E1-8006-444553540000}, {E98E5CA0-5C91-11E1-8006-444553540000}, Y, Y
N, x00, x06A3, x0763, Saitek Pro Flight Rudder Pedals, 4, 4, 0, {E98E5CA0-5C91-11E1-8005-444553540000}, {E98E5CA0-5C91-11E1-8005-444553540000}, {E98E5CA0-5C91-11E1-8005-444553540000}, Y, Y
N, x00, x16C0, x05BA, BU0836A Interface, 0, 0, 0, {8C6FD830-FE13-11E2-8001-444553540000}, {8C6FD830-FE13-11E2-8001-444553540000}, {8C6FD830-FE13-11E2-8001-444553540000}, Y, Y
N, x00, x16C0, x2786, 737YOKE-LE by ACE, 2, 2, 1, {6368B4F0-476D-11E2-8001-444553540000}, {6368B4F0-476D-11E2-8001-444553540000}, {6368B4F0-476D-11E2-8001-444553540000}, Y, Y
N, x00, x16C0, x2786, 737YOKE-LE by ACE, 3, 3, 0, {E98E5CA0-5C91-11E1-8009-444553540000}, {E98E5CA0-5C91-11E1-8009-444553540000}, {E98E5CA0-5C91-11E1-8009-444553540000}, Y, Y
,,, Values matched and decided
Y, x1E, x06A3, x0763, Saitek Pro Flight Rudder Pedals, 1, 1, 1, {E98E5CA0-5C91-11E1-8006-444553540000}, {E98E5CA0-5C91-11E1-8006-444553540000}, {E98E5CA0-5C91-11E1-8006-444553540000}, Y, Y
Y, x1E, x06A3, x0763, Saitek Pro Flight Rudder Pedals, 4, 4, 0, {E98E5CA0-5C91-11E1-8005-444553540000}, {E98E5CA0-5C91-11E1-8005-444553540000}, {E98E5CA0-5C91-11E1-8005-444553540000}, Y, Y
Y, x1E, x16C0, x05BA, BU0836A Interface, 0, 0, 0, {8C6FD830-FE13-11E2-8001-444553540000}, {8C6FD830-FE13-11E2-8001-444553540000}, {8C6FD830-FE13-11E2-8001-444553540000}, Y, Y
Y, x1E, x16C0, x2786, 737YOKE-LE by ACE, 2, 2, 1, {6368B4F0-476D-11E2-8001-444553540000}, {6368B4F0-476D-11E2-8001-444553540000}, {6368B4F0-476D-11E2-8001-444553540000}, Y, Y
Y, x1E, x16C0, x2786, 737YOKE-LE by ACE, 3, 3, 0, {E98E5CA0-5C91-11E1-8009-444553540000}, {E98E5CA0-5C91-11E1-8009-444553540000}, {E98E5CA0-5C91-11E1-8009-444553540000}, Y, Y
-
1 hour ago, Pete Dowson said:
FSUIPC5 always created the FSUIPC5.Joyscan.csv file. It will certainly be there, in the same folder as your FSUIPC5.INI and FSUIPC5.Log files.
I'm finding this a bit confusing. If the Bodnar board is connected to the same PC as your P3D Installation, then that's where the throttle axes will be seen, and directly, not via WideFS.
If your throttles are connected to a Bodnar board on a different PC, then WideClient does not send the axis inputs through to FSUIPC, only buttons -- these will be seen as connecting to joysticks with numbers with a client PC number first. Client numbers are listed in your FSUIPC5.INI file, here:
[ClientNames]
1=SLAVE12
2=SLAVE13
3=SLAVE14I don't know what troubles you are having with connection, or which WideFS client your Bodnar board is connected to (if it is), but the WideServer.LOG you posted showed a healthy connection with "SLAVE14":
********* WideServer.DLL Log [version 7.076] *********
Blocksize guide = 8192 (double allowed)
Date (dmy): 07/07/19, Time 21:17:29.187: Server name is MASTER11
15085 Initialising TCP/IP server
15085 Initialising UDP/IP server
17082 Connected to computer "SLAVE14" running WideClient version 6.860 (IP=192.168.15.120) UDP
726028 Auto send for 0 stopped before sending all data (0 of 47 sent), Error=10013 (IP=255.255.255.255) UDP
732549 Close signalled to clients
733657 Closing down now ...
Memory managed: Offset records: 244 alloc, 242 free
Read buffer usage: 6932 alloc, 6932 free, max in session: 1
Write buffer usage: 31690 alloc, 31690 free, max in session: 1
Throughput maximum achieved: 20 frames/sec, 789 bytes/sec
Throughput average achieved for complete session: 4 frames/sec, 137 bytes/sec
Average receive rate from "SLAVE14": 9 frames/sec, 552 bytes/sec
********* Log file closed *********The error 10013 is only the disconnection when you closed the P3D session. It was obviously quite happily exchanging data for nearly 12 minutes before this.
However, WideFs is not involved in your throttle axis problems.
If the only change was from P3D3 to P3D4 and so FSUIPC4 to FSUIPC5, and no changes were made to the hardware at all, then everything would have worked exactly as before. That's always been one of the whole points of the FSUIPC interface -- continuity right through FS versions since FS98.
Changes to the USB connections would mean the assignments have to be re-matched, for which I see John has helped sort out for you. Also, re-installs of Windows changes things too because it will generate new "GUIDs" -- the unique identity assigned by Windows to everything (all devices, all objects, even all internal textures and so on).
Incidentally, I assume you are using the old version of ProSim (v1)? The latest versions of Prosim v2 do require you to assign and calibrate all flight controls in ProSim. But i have been doing this for my throttles successfully now since first using ProSim, which was then an early version 1. I've only just recently moved my flight controls (yoke, rudder, till0 to ProSim.
Pete
The throttles are connected via USB to the server pc the park brake lever led light to the slave pc via a bodner board. The USB connection has not been changed on the server pc for the throttle I will look again tomorrow for the joystick file. It was not in the module folder but I will check again to be absolutely sure. Prosim is v1.45 I was going to upgrade that but after this I think I’ll give it a miss.
The bodner card is connected to the slave pc only and not the server. The only change other than the prepar upgrade was fsuicpv5 and the accidental upgrade to windows on the slave pc the bodner card is connected to. I disconnected the firewall and just to be sure made sure the wide client was in the firewall accepted programmes. I will implement johns changes tomorrow and c how things go. Thank you for the support thus far
-
The joyscan.csv file is not in that folder I have looked around but can’t locate it. I dont recall it ever being there. I will make your changes the throttle quad is connected to the server pc via USB (pc prepar is located) there is a wire connection to the Bodnar interface card I have looked at this and it is I presume the park brake LED light. There is an SIOC script for park brake light I’m assuming when it is on the light goes on the Bodnar card is connected to the slave pc where SIOC server is located. I’m assuming Prosim and fsuicpv5 communicate via widefs but having trouble with connection. The firewall is turned off on all pc and just to be sure I made sure the wide client 9Now the slave had firewall permission
i can’t see how the throttle is connected to the Bodnar card and it was running via fsuicp before the changes
-
oh if i move throttles in prosim they show as as the interface card as well with heap of numbers
-
********* WideServer.DLL Log [version 7.076] *********
Blocksize guide = 8192 (double allowed)
Date (dmy): 07/07/19, Time 20:44:04.710: Server name is MASTER11
15662 Initialising TCP/IP server
15662 Initialising UDP/IP server
26816 Auto send for 0 stopped before sending all data (0 of 47 sent), Error=10013 (IP=255.255.255.255) UDP
33540 Close signalled to clients
-
********* WideServer.DLL Log [version 7.076] *********
Blocksize guide = 8192 (double allowed)
Date (dmy): 07/07/19, Time 21:17:29.187: Server name is MASTER11
15085 Initialising TCP/IP server
15085 Initialising UDP/IP server
17082 Connected to computer "SLAVE14" running WideClient version 6.860 (IP=192.168.15.120) UDP
726028 Auto send for 0 stopped before sending all data (0 of 47 sent), Error=10013 (IP=255.255.255.255) UDP
732549 Close signalled to clients
733657 Closing down now ...
Memory managed: Offset records: 244 alloc, 242 free
Read buffer usage: 6932 alloc, 6932 free, max in session: 1
Write buffer usage: 31690 alloc, 31690 free, max in session: 1
Throughput maximum achieved: 20 frames/sec, 789 bytes/sec
Throughput average achieved for complete session: 4 frames/sec, 137 bytes/sec
Average receive rate from "SLAVE14": 9 frames/sec, 552 bytes/sec
********* Log file closed ********* -
3 hours ago, John Dowson said:
As I said, I need to see your joyscan.csv and log files, as well as your current ini - could you please attach all 3. If your devices are recognised by windows as joystick/HID devices then they should be recognised by FSUIPC.
where would i find joyscan.csv
-
General]
UpdatedByVersion=5151
History=ZHLS0H8HHGK4K0GRY3WHE
MouseWheelMove=No
MouseWheelTrim=No
MouseWheelTrimSpeed=1
JoystickTimeout=20
PollGFTQ6=Yes
BlankDisplays=No
FixMachSpeedBug=No
AutoScanDevices=Yes
VisibilityOptions=No
OneCloudLayer=No
CloudTurbulence=No
CloudIcing=No
GenerateCirrus=No
SuppressCloudTurbulence=No
MaxIce=-4
MinIce=-4
UpperWindGusts=No
SuppressWindTurbulence=No
SuppressWindVariance=No
WindTurbulence=No
TurbulenceRate=1.0,5.0
TurbulenceDivisor=20,20,40,40
SuppressAllGusts=No
MaxSurfaceWind=0
WindLimitLevel=200
WindDiscardLevel=400
WindAjustAltitude=No
WindAjustAltitudeBy=2000
SmoothBySimTime=No
WindSmoothing=No
WindSmoothness=2
WindSmoothAirborneOnly=Yes
PressureSmoothness=0
TemperatureSmoothness=0
DisconnTrimForAP=No
ZeroElevForAPAlt=No
ThrottleSyncAll=No
WhiteMessages=No
ShowPMcontrols=No
SpoilerIncrement=512
MagicBattery=No
RudderSpikeRemoval=No
ElevatorSpikeRemoval=No
AileronSpikeRemoval=No
ReversedElevatorTrim=No
ClockSync=No
ClockSyncMins=5
ClearWeatherDynamics=No
OwnWeatherChanges=No
TimeForSelect=4
LoadFlightMenu=No
LoadPlanMenu=No
PauseAfterCrash=No
BrakeReleaseThreshold=75
SaveDataWithFlights=No
ZapSound=firework
ShortAircraftNameOk=No
UseProfiles=Yes
EnableMouseLook=No
AxesWrongRange=No
TCASid=Flight
TCASrange=40
AxisCalibration=No
DirectAxesToCalibs=No
ShowMultilineWindow=Yes
SuppressSingleline=No
SuppressMultilineFS=No
AxisIntercepts=No
DontResetAxes=No
InitDelay=0
GetNearestAirports=Yes
WeatherReadFactor=2
WeatherRewriteSeconds=1
LuaRerunDelay=66
Console=No
OOMcheck=Yes
InitDelayDevicesToo=No
PMDG737offsets=Auto
PMDG747offsets=Auto
PMDG777offsets=Auto
Annotate=Yes
UseSystemTime=No
UseMidMouseBtn=Yes
RestoreSimcWindows=No
DelayedMouseLookZoom=No
WideLuaGlobals=Yes
TextFileMaxRead=4095
TextFileNumbers=Yes
TextFilePhonetics=Yes
ThreadAffinityMask=x0
LuaAffinityMask=x0
LogOptionProtect=Yes
TimeForLuaClosing=2
TrafficStallTime=1
InitialStallTime=10
NormalStallTime=1
ComReadLoopTime=20
DebugLua=Yes
FSVersionUsed="Lockheed Martin® Prepar3D® v4",4.5.12.30293
SimConnectUsed=4.5.0.0
LogWeather=Yes
LogWrites=Yes
LogReads=Yes
LogEvents=Yes
LogLua=Yes
LogAxes=Yes
LogButtonsKeys=Yes
LogExtras=Yes[JoyNames]
AutoAssignLetters=No
T=G-Throttles << MISSING JOYSTICK >>
T.GUID={048B2C90-D690-11E1-8001-444553540000}
B=BU0836X Interface << MISSING JOYSTICK >>
B.GUID={8C6FD830-FE13-11E2-8001-444553540000}
R=Saitek Pro Flight Rudder Pedals
R.GUID={E98E5CA0-5C91-11E1-8006-444553540000}
S=Saitek Pro Flight Rudder Pedals
S.GUID={E98E5CA0-5C91-11E1-8005-444553540000}
Z=737YOKE-LE by ACE
Z.GUID={6368B4F0-476D-11E2-8001-444553540000}
Y=737YOKE-LE by ACE
Y.GUID={E98E5CA0-5C91-11E1-8009-444553540000}
1=Saitek Pro Flight Rudder Pedals
1.GUID={E98E5CA0-5C91-11E1-8006-444553540000}
2=737YOKE-LE by ACE
2.GUID={6368B4F0-476D-11E2-8001-444553540000}
3=737YOKE-LE by ACE
3.GUID={E98E5CA0-5C91-11E1-8009-444553540000}
4=Saitek Pro Flight Rudder Pedals
4.GUID={E98E5CA0-5C91-11E1-8005-444553540000}
0=BU0836A Interface
0.GUID={8C6FD830-FE13-11E2-8001-444553540000}
A=BU0836A Interface
A.GUID={8C6FD830-FE13-11E2-8001-444553540000}[Buttons]
ButtonRepeat=20,10
13=P64,0,C66072,0 -{PITOT_HEAT_ON}-
14=U64,0,C66073,0 -{PITOT_HEAT_OFF}-
15=P64,1,C65591,0 -{SITUATION_RESET}-
16=P64,24,C65733,0 -{ABORT}-
17=P64,25,Cx02003320,xABCD -{offset word set, offset 3320}-
21=PT,0,Cx02000BC8,x0007
22=UT,0,Cx02000BC8,x0000
23=RT,3,C65602,0
24=UT,3,C65697,0
25=PB,0,Cx02000BC8,x0007
26=UB,0,Cx02000BC8,x0000
27=PB,1,C66079,0
28=PB,2,C66080,0
29=RB,3,C65607,0
30=RB,4,C65615,0
31=PB,5,Cx02007370,x003C
32=RY,1,C65607,0 -{ELEV_TRIM_DN}-
33=RY,0,C65615,0 -{ELEV_TRIM_UP}-
34=RZ,1,C65607,0 -{ELEV_TRIM_DN}-
35=RZ,0,C65615,0 -{ELEV_TRIM_UP}-
36=PZ,4,C65561,0 -{PAUSE_TOGGLE}-
PollInterval=25[AutoSave]
Next=1
Interval=60
Files=10
SaveOnGround=No
AutoSaveEnabled=No[GPSout]
GPSoutEnabled=No[GPSout2]
GPSoutEnabled=No[WideServer]
WideFSenabled=Yes
AdvertiseService=No
Port=8002
Port2=9002
ProtocolPreferred=UDP
AllowShutdown=Yes
[Sounds]
Path=D:\fsx\Sound\
Device1=Primary Sound Driver
Device2=Speakers (Realtek High Definition Audio)
Device3=Realtek Digital Output (Realtek High Definition Audio)
Device4=MX613ST-4 (NVIDIA High Definition Audio)
Device5=MX613ST-0 (NVIDIA High Definition Audio)
Device6=MX613ST-C (NVIDIA High Definition Audio)[Axes]
0=TX,256,D,9,0,0,0
1=TY,256,D,10,0,0,0
2=TZ,256,D,23,0,0,0
3=TU,256,D,22,0,0,0
PollInterval=10
RangeRepeatRate=10
4=RX,256,D,7,0,0,0 -{ DIRECT: LeftBrake }-
5=RY,256,D,8,0,0,0 -{ DIRECT: RightBrake }-
6=RR,256,D,3,0,0,0 -{ DIRECT: Rudder }-
7=ZX,256,D,1,0,0,0 -{ DIRECT: Aileron }-
8=ZY,256,D,2,0,0,0 -{ DIRECT: Elevator }-
9=YX,256,D,1,0,0,0 -{ DIRECT: Aileron }-
10=YY,256,D,2,0,0,0 -{ DIRECT: Elevator }-
11=SX,256,D,7,0,0,0 -{ DIRECT: LeftBrake }-
12=SY,256,D,8,0,0,0 -{ DIRECT: RightBrake }-
13=SR,256,D,3,0,0,0 -{ DIRECT: Rudder }-[ClientNames]
1=SLAVE12
2=SLAVE13
3=SLAVE14[JoystickCalibration]
AllowSuppressForPFCquad=Yes
ExcludeThrottleSet=Yes
ExcludeMixtureSet=Yes
ExcludePropPitchSet=Yes
SepRevsJetsOnly=No
ApplyHeloTrim=No
UseAxisControlsForNRZ=No
FlapsSetControl=0
FlapDetents=Yes
ReverserControl=66292
Reverser1Control=66422
Reverser2Control=66425
Reverser3Control=66428
Reverser4Control=66431
MaxThrottleForReverser=256
AileronTrimControl=66731
RudderTrimControl=66732
CowlFlaps1Control=66162
CowlFlaps2Control=66163
CowlFlaps3Control=66164
CowlFlaps4Control=66165
SteeringTillerControl=0
MaxSteerSpeed=60
LeftBrake=-16380,16380/16
RightBrake=-16380,16380/16
FlapStarts=-16384,-13765,-9239,-6209,-2020,336,6755,10375,11868
Flaps=-16384,16380
FlapEnds=-14027,-10025,-7032,-3553,75,4292,10226,11607,13137
RudderBlendLowest=1
Throttle1=-16380,-512,512,16380
Throttle=-16380,16380[Traffic Limiter]
AirportPreference=50
PlannedAirportsPreference=50
GroundPreference=50
NearerPreference=50
TargetFrameRate=0
TrafficLimit=0[Monitor]
Display=15 -
********* FSUIPC5, Version 5.151 (21st February 2019) by Pete Dowson *********
Running inside Prepar3D v4
Module base=7FED9920000
Windows 7 Home Premium 64 Bit with SP 1.0 reported as Build 7601 (OS 6.1)
Prepar3D.exe version = 4.5.12.30293
Reading options from "C:\Program Files\Lockheed Martin\Prepar3D v4\Modules\FSUIPC5.ini"
Checking the Registrations now ...
User Name="MARTYN DAVIS"
User Addr="marty.davis71@gmail.com"
FSUIPC5 Key is provided
WideFS7 Key is provided
0 System time = 07/07/2019 20:43:10
0 FLT UNC path = "C:\Users\sim\Documents\Prepar3D v4 Files\"
16 Using DialogMode
16 FS UNC path = "C:\Program Files\Lockheed Martin\Prepar3D v4\"
156 ---------------------- Joystick Device Scan -----------------------
156 Product= Saitek Pro Flight Rudder Pedals
156 Manufacturer= Saitek
156 Vendor=06A3, Product=0763 (Version 1.0)
156 GUIDs returned for product: VID_06A3&PID_0763:
156 GUID= {E98E5CA0-5C91-11E1-8006-444553540000}
156 Details: Btns=0, POVs=(0, 0, 0, 0), Cal=x00000000, Max=R511,U0,V0,X127,Y127,Z0
156 GUID= {E98E5CA0-5C91-11E1-8005-444553540000}
156 Details: Btns=0, POVs=(0, 0, 0, 0), Cal=x00000000, Max=R511,U0,V0,X127,Y127,Z0
172 Product= Saitek Pro Flight Rudder Pedals
172 Manufacturer= Saitek
172 Vendor=06A3, Product=0763 (Version 1.0)
172 Product= BU0836A Interface
172 Manufacturer= Leo Bodnar
172 Serial Number= B31362
172 Vendor=16C0, Product=05BA (Version 1.34)
172 GUIDs returned for product: VID_16C0&PID_05BA:
172 GUID= {8C6FD830-FE13-11E2-8001-444553540000}
172 Details: Btns=32, POVs=(0, 0, 0, 0), Cal=x00000000, Max=R3970,U3970,V3980,X0,Y0,Z3661
172 Product= 737YOKE-LE by ACE
172 Manufacturer= ACE
172 Serial Number= A18593
172 Vendor=16C0, Product=2786 (Version 1.35)
172 GUIDs returned for product: VID_16C0&PID_2786:
172 GUID= {6368B4F0-476D-11E2-8001-444553540000}
172 Details: Btns=32, POVs=(0, 0, 0, 0), Cal=x00000000, Max=R0,U0,V0,X2822,Y2739,Z0
172 GUID= {E98E5CA0-5C91-11E1-8009-444553540000}
172 Details: Btns=32, POVs=(0, 0, 0, 0), Cal=x00000000, Max=R0,U0,V0,X2860,Y2950,Z0
172 Product= 737YOKE-LE by ACE
172 Manufacturer= ACE
172 Serial Number= A23813
172 Vendor=16C0, Product=2786 (Version 1.35)
172 -------------------------------------------------------------------
172 Device acquired for use:
172 Joystick ID = 1 (Registry okay)
172 1=Saitek Pro Flight Rudder Pedals
172 1.GUID={E98E5CA0-5C91-11E1-8006-444553540000}
172 Device acquired for use:
172 Joystick ID = 4 (Registry okay)
172 4=Saitek Pro Flight Rudder Pedals
172 4.GUID={E98E5CA0-5C91-11E1-8005-444553540000}
172 Device acquired for use:
172 Joystick ID = 0 (Registry okay)
172 0=BU0836A Interface
172 0.GUID={8C6FD830-FE13-11E2-8001-444553540000}
172 Device acquired for use:
172 Joystick ID = 2 (Registry okay)
172 2=737YOKE-LE by ACE
172 2.GUID={6368B4F0-476D-11E2-8001-444553540000}
172 Device acquired for use:
172 Joystick ID = 3 (Registry okay)
172 3=737YOKE-LE by ACE
172 3.GUID={E98E5CA0-5C91-11E1-8009-444553540000}
172 -------------------------------------------------------------------
188 LogOptions=00000000 00000001
188 -------------------------------------------------------------------
188 SimConnect_Open succeeded: waiting to check version okay
188 Opened separate AI Traffic client okay
188 ### PDKmodeHelper callback registered
2434 Running in "Lockheed Martin® Prepar3D® v4", Version: 4.5.12.30293 (SimConnect: 4.5.0.0)
2434 Initialising SimConnect data requests now
2434 FSUIPC Menu entry added
2434 ... Using Prepar3D with Professional License
2450 C:\Users\sim\Documents\Prepar3D v4 Files\Prepar3D_Default.fxml
2450 C:\Program Files\Lockheed Martin\Prepar3D v4\SimObjects\Airplanes\Prosim 737-800 Regular\Prosim738.air
32417 ### The user object is 'Prosim_737_800_Winglets_Prosim_Livery'
32417 ### Mode is NORMAL
33182 ### Mode: PAUSE on
45677 Loading Complete ...
45709 ### Mode is NORMAL
48017 Aircraft loaded: running normally now ...
48142 User Aircraft ID 2 supplied, now being used
48298 System time = 07/07/2019 20:43:58, Simulator time = 14:02:28 (05:02Z)
48298 Aircraft="Prosim_737_800_Winglets_Prosim_Livery"
54445 -------------------- Starting everything now ----------------------
54445 Starting WideServer now ...
55958 Advanced Weather Interface Enabled
69046 Sim stopped: average frame rate for last 20 secs = 4.5 fps
69046 Max AI traffic was 0 aircraft
69046 -------------------------------------------------------------------
70357 === Closing session: waiting for DLLStop to be called ...
78687 === DLLStop called ...
78687 === Closing external processes we started ...
79686 === About to kill any Lua plug-ins still running ...
79842 === Closing global Lua thread
80856 === About to kill my timers ...
81058 === Restoring window procs ...
81058 === Unloading libraries ...
81058 === stopping other threads ...
81058 === ... Button scanning ...
81152 === ... Axis scanning ...
81261 === Releasing joystick devices ...
81261 === Freeing macro memory
81261 === Removing any offset overrides
81261 === Closing all WideFS threads
81261 TransmitClientEvent failed!
81261 TransmitClientEvent failed!
81433 TransmitClientEvent failed!
81433 TransmitClientEvent failed!
81495 TransmitClientEvent failed!
81495 TransmitClientEvent failed!
81604 TransmitClientEvent failed!
81604 TransmitClientEvent failed!
81714 TransmitClientEvent failed!
81714 TransmitClientEvent failed!
81823 TransmitClientEvent failed!
81823 TransmitClientEvent failed!
81932 TransmitClientEvent failed!
81932 TransmitClientEvent failed!
82041 TransmitClientEvent failed!
82041 TransmitClientEvent failed!
82150 TransmitClientEvent failed!
82150 TransmitClientEvent failed!
82260 TransmitClientEvent failed!
82260 TransmitClientEvent failed!
82369 TransmitClientEvent failed!
82369 TransmitClientEvent failed!
82494 TransmitClientEvent failed!
82494 TransmitClientEvent failed!
82587 TransmitClientEvent failed!
82587 TransmitClientEvent failed!
82696 TransmitClientEvent failed!
82696 TransmitClientEvent failed!
82806 TransmitClientEvent failed!
82806 TransmitClientEvent failed!
82915 TransmitClientEvent failed!
82915 TransmitClientEvent failed!
83024 TransmitClientEvent failed!
83024 TransmitClientEvent failed!
83133 TransmitClientEvent failed!
83133 TransmitClientEvent failed!
83242 TransmitClientEvent failed!
83242 TransmitClientEvent failed!
83352 TransmitClientEvent failed!
83352 TransmitClientEvent failed!
83461 TransmitClientEvent failed!
83461 TransmitClientEvent failed!
83586 TransmitClientEvent failed!
83586 TransmitClientEvent failed!
83679 TransmitClientEvent failed!
83679 TransmitClientEvent failed!
83788 TransmitClientEvent failed!
83788 TransmitClientEvent failed!
83898 TransmitClientEvent failed!
83898 TransmitClientEvent failed! -
********* FSUIPC5, Version 5.151 (21st February 2019) by Pete Dowson *********
Running inside Prepar3D v4
Module base=7FED9920000
Windows 7 Home Premium 64 Bit with SP 1.0 reported as Build 7601 (OS 6.1)
Prepar3D.exe version = 4.5.12.30293
Reading options from "C:\Program Files\Lockheed Martin\Prepar3D v4\Modules\FSUIPC5.ini"
Checking the Registrations now ...
User Name="MARTYN DAVIS"
User Addr="marty.davis71@gmail.com"
FSUIPC5 Key is provided
WideFS7 Key is provided
0 System time = 07/07/2019 20:43:10
0 FLT UNC path = "C:\Users\sim\Documents\Prepar3D v4 Files\"
16 Using DialogMode
16 FS UNC path = "C:\Program Files\Lockheed Martin\Prepar3D v4\"
156 ---------------------- Joystick Device Scan -----------------------
156 Product= Saitek Pro Flight Rudder Pedals
156 Manufacturer= Saitek
156 Vendor=06A3, Product=0763 (Version 1.0)
156 GUIDs returned for product: VID_06A3&PID_0763:
156 GUID= {E98E5CA0-5C91-11E1-8006-444553540000}
156 Details: Btns=0, POVs=(0, 0, 0, 0), Cal=x00000000, Max=R511,U0,V0,X127,Y127,Z0
156 GUID= {E98E5CA0-5C91-11E1-8005-444553540000}
156 Details: Btns=0, POVs=(0, 0, 0, 0), Cal=x00000000, Max=R511,U0,V0,X127,Y127,Z0
172 Product= Saitek Pro Flight Rudder Pedals
172 Manufacturer= Saitek
172 Vendor=06A3, Product=0763 (Version 1.0)
172 Product= BU0836A Interface
172 Manufacturer= Leo Bodnar
172 Serial Number= B31362
172 Vendor=16C0, Product=05BA (Version 1.34)
172 GUIDs returned for product: VID_16C0&PID_05BA:
172 GUID= {8C6FD830-FE13-11E2-8001-444553540000}
172 Details: Btns=32, POVs=(0, 0, 0, 0), Cal=x00000000, Max=R3970,U3970,V3980,X0,Y0,Z3661
172 Product= 737YOKE-LE by ACE
172 Manufacturer= ACE
172 Serial Number= A18593
172 Vendor=16C0, Product=2786 (Version 1.35)
172 GUIDs returned for product: VID_16C0&PID_2786:
172 GUID= {6368B4F0-476D-11E2-8001-444553540000}
172 Details: Btns=32, POVs=(0, 0, 0, 0), Cal=x00000000, Max=R0,U0,V0,X2822,Y2739,Z0
172 GUID= {E98E5CA0-5C91-11E1-8009-444553540000}
172 Details: Btns=32, POVs=(0, 0, 0, 0), Cal=x00000000, Max=R0,U0,V0,X2860,Y2950,Z0
172 Product= 737YOKE-LE by ACE
172 Manufacturer= ACE
172 Serial Number= A23813
172 Vendor=16C0, Product=2786 (Version 1.35)
172 -------------------------------------------------------------------
172 Device acquired for use:
172 Joystick ID = 1 (Registry okay)
172 1=Saitek Pro Flight Rudder Pedals
172 1.GUID={E98E5CA0-5C91-11E1-8006-444553540000}
172 Device acquired for use:
172 Joystick ID = 4 (Registry okay)
172 4=Saitek Pro Flight Rudder Pedals
172 4.GUID={E98E5CA0-5C91-11E1-8005-444553540000}
172 Device acquired for use:
172 Joystick ID = 0 (Registry okay)
172 0=BU0836A Interface
172 0.GUID={8C6FD830-FE13-11E2-8001-444553540000}
172 Device acquired for use:
172 Joystick ID = 2 (Registry okay)
172 2=737YOKE-LE by ACE
172 2.GUID={6368B4F0-476D-11E2-8001-444553540000}
172 Device acquired for use:
172 Joystick ID = 3 (Registry okay)
172 3=737YOKE-LE by ACE
172 3.GUID={E98E5CA0-5C91-11E1-8009-444553540000}
172 -------------------------------------------------------------------
188 LogOptions=00000000 00000001
188 -------------------------------------------------------------------
188 SimConnect_Open succeeded: waiting to check version okay
188 Opened separate AI Traffic client okay
188 ### PDKmodeHelper callback registered
2434 Running in "Lockheed Martin® Prepar3D® v4", Version: 4.5.12.30293 (SimConnect: 4.5.0.0)
2434 Initialising SimConnect data requests now
2434 FSUIPC Menu entry added
2434 ... Using Prepar3D with Professional License
2450 C:\Users\sim\Documents\Prepar3D v4 Files\Prepar3D_Default.fxml
2450 C:\Program Files\Lockheed Martin\Prepar3D v4\SimObjects\Airplanes\Prosim 737-800 Regular\Prosim738.air
32417 ### The user object is 'Prosim_737_800_Winglets_Prosim_Livery'
32417 ### Mode is NORMAL
33182 ### Mode: PAUSE on
45677 Loading Complete ...
45709 ### Mode is NORMAL
48017 Aircraft loaded: running normally now ...
48142 User Aircraft ID 2 supplied, now being used
48298 System time = 07/07/2019 20:43:58, Simulator time = 14:02:28 (05:02Z)
48298 Aircraft="Prosim_737_800_Winglets_Prosim_Livery"
54445 -------------------- Starting everything now ----------------------
54445 Starting WideServer now ...
55958 Advanced Weather Interface Enabled
69046 Sim stopped: average frame rate for last 20 secs = 4.5 fps
69046 Max AI traffic was 0 aircraft
69046 -------------------------------------------------------------------
70357 === Closing session: waiting for DLLStop to be called ...
78687 === DLLStop called ...
78687 === Closing external processes we started ...
79686 === About to kill any Lua plug-ins still running ...
79842 === Closing global Lua thread
80856 === About to kill my timers ...
81058 === Restoring window procs ...
81058 === Unloading libraries ...
81058 === stopping other threads ...
81058 === ... Button scanning ...
81152 === ... Axis scanning ...
81261 === Releasing joystick devices ...
81261 === Freeing macro memory
81261 === Removing any offset overrides
81261 === Closing all WideFS threads
81261 TransmitClientEvent failed!
81261 TransmitClientEvent failed!
81433 TransmitClientEvent failed!
81433 TransmitClientEvent failed!
81495 TransmitClientEvent failed!
81495 TransmitClientEvent failed!
81604 TransmitClientEvent failed!
81604 TransmitClientEvent failed!
81714 TransmitClientEvent failed!
81714 TransmitClientEvent failed!
81823 TransmitClientEvent failed!
81823 TransmitClientEvent failed!
81932 TransmitClientEvent failed!
81932 TransmitClientEvent failed!
82041 TransmitClientEvent failed!
82041 TransmitClientEvent failed!
82150 TransmitClientEvent failed!
82150 TransmitClientEvent failed!
82260 TransmitClientEvent failed!
82260 TransmitClientEvent failed!
82369 TransmitClientEvent failed!
82369 TransmitClientEvent failed!
82494 TransmitClientEvent failed!
82494 TransmitClientEvent failed!
82587 TransmitClientEvent failed!
82587 TransmitClientEvent failed!
82696 TransmitClientEvent failed!
82696 TransmitClientEvent failed!
82806 TransmitClientEvent failed!
82806 TransmitClientEvent failed!
82915 TransmitClientEvent failed!
82915 TransmitClientEvent failed!
83024 TransmitClientEvent failed!
83024 TransmitClientEvent failed!
83133 TransmitClientEvent failed!
83133 TransmitClientEvent failed!
83242 TransmitClientEvent failed!
83242 TransmitClientEvent failed!
83352 TransmitClientEvent failed!
83352 TransmitClientEvent failed! -
If I go to windows games devices calibration the throttle flaps and speed brake arm register as device Buo836a and can be calibrated. The park brake and fuel cutoff levers don’t. If this helps
-
I noticed there are 2 Buo86 interface cards in the .ini file there is only one card I see it listed twice in the file an X and an A with different guid numbers. Is this important?
The throttle quad is connected by USB to main flight sim pc. There are wires connected to the Buo836a interface card but I believe this is the parkbrake so the LED light goes off and on with the brake. The fuel cut of levers, park brake lever, all register as buttons in FSUICPV5 The throttle levers, flaps lever and speed brake do not register at all in FSUICPV5. I have attached a picture to help understand what I have it may help. I believe the throttles flaps and speed brake are not connected to the card but USB direct to flight sim machine. I will do as u ask tomorrow
-
Still can’t get the throttle flaps etc back im out of ideas now but have learnt heaps and getting very close to solving it now
-
[General]
UpdatedByVersion=5151
History=CW4LDWN0AVQLC6W6DIBWZ
MouseWheelMove=No
MouseWheelTrim=No
MouseWheelTrimSpeed=1
JoystickTimeout=20
PollGFTQ6=Yes
BlankDisplays=No
FixMachSpeedBug=No
AutoScanDevices=Yes
VisibilityOptions=No
OneCloudLayer=No
CloudTurbulence=No
CloudIcing=No
GenerateCirrus=No
SuppressCloudTurbulence=No
MaxIce=-4
MinIce=-4
UpperWindGusts=No
SuppressWindTurbulence=No
SuppressWindVariance=No
WindTurbulence=No
TurbulenceRate=1.0,5.0
TurbulenceDivisor=20,20,40,40
SuppressAllGusts=No
MaxSurfaceWind=0
WindLimitLevel=200
WindDiscardLevel=400
WindAjustAltitude=No
WindAjustAltitudeBy=2000
SmoothBySimTime=No
WindSmoothing=No
WindSmoothness=2
WindSmoothAirborneOnly=Yes
PressureSmoothness=0
TemperatureSmoothness=0
DisconnTrimForAP=No
ZeroElevForAPAlt=No
ThrottleSyncAll=No
WhiteMessages=No
ShowPMcontrols=No
SpoilerIncrement=512
MagicBattery=No
RudderSpikeRemoval=No
ElevatorSpikeRemoval=No
AileronSpikeRemoval=No
ReversedElevatorTrim=No
ClockSync=No
ClockSyncMins=5
ClearWeatherDynamics=No
OwnWeatherChanges=No
TimeForSelect=4
LoadFlightMenu=No
LoadPlanMenu=No
PauseAfterCrash=No
BrakeReleaseThreshold=75
SaveDataWithFlights=No
ZapSound=firework
ShortAircraftNameOk=No
UseProfiles=Yes
EnableMouseLook=No
AxesWrongRange=No
TCASid=Flight
TCASrange=40
AxisCalibration=No
DirectAxesToCalibs=No
ShowMultilineWindow=Yes
SuppressSingleline=No
SuppressMultilineFS=No
AxisIntercepts=No
DontResetAxes=No
InitDelay=0
GetNearestAirports=Yes
WeatherReadFactor=2
WeatherRewriteSeconds=1
LuaRerunDelay=66
Console=No
OOMcheck=Yes
InitDelayDevicesToo=No
PMDG737offsets=Auto
PMDG747offsets=Auto
PMDG777offsets=Auto
Annotate=Yes
UseSystemTime=No
UseMidMouseBtn=Yes
RestoreSimcWindows=No
DelayedMouseLookZoom=No
WideLuaGlobals=Yes
TextFileMaxRead=4095
TextFileNumbers=Yes
TextFilePhonetics=Yes
ThreadAffinityMask=x0
LuaAffinityMask=x0
LogOptionProtect=Yes
TimeForLuaClosing=2
TrafficStallTime=1
InitialStallTime=10
NormalStallTime=1
ComReadLoopTime=20
FSVersionUsed="Lockheed Martin® Prepar3D® v4",4.5.12.30293
SimConnectUsed=4.5.0.0[JoyNames]
AutoAssignLetters=YES
T=G-Throttles << MISSING JOYSTICK >>
T.GUID={048B2C90-D690-11E1-8001-444553540000}
B=BU0836X Interface
B.GUID={8C6FD830-FE13-11E2-8001-444553540000}
R=Saitek Pro Flight Rudder Pedals
R.GUID={E98E5CA0-5C91-11E1-8006-444553540000}
S=Saitek Pro Flight Rudder Pedals
S.GUID={E98E5CA0-5C91-11E1-8005-444553540000}
Z=737YOKE-LE by ACE
Z.GUID={6368B4F0-476D-11E2-8001-444553540000}
Y=737YOKE-LE by ACE
Y.GUID={E98E5CA0-5C91-11E1-8009-444553540000}
1=Saitek Pro Flight Rudder Pedals
1.GUID={E98E5CA0-5C91-11E1-8006-444553540000}
2=737YOKE-LE by ACE
2.GUID={6368B4F0-476D-11E2-8001-444553540000}
3=737YOKE-LE by ACE
3.GUID={E98E5CA0-5C91-11E1-8009-444553540000}
4=Saitek Pro Flight Rudder Pedals
4.GUID={E98E5CA0-5C91-11E1-8005-444553540000}
0=BU0836A Interface
0.GUID={8C6FD830-FE13-11E2-8001-444553540000}[Buttons]
ButtonRepeat=20,10
13=P64,0,C66072,0 -{PITOT_HEAT_ON}-
14=U64,0,C66073,0 -{PITOT_HEAT_OFF}-
15=P64,1,C65591,0 -{SITUATION_RESET}-
16=P64,24,C65733,0 -{ABORT}-
17=P64,25,Cx02003320,xABCD -{offset word set, offset 3320}-
21=PT,0,Cx02000BC8,x0007
22=UT,0,Cx02000BC8,x0000
23=RT,3,C65602,0
24=UT,3,C65697,0
25=PB,0,Cx02000BC8,x0007
26=UB,0,Cx02000BC8,x0000
27=PB,1,C66079,0
28=PB,2,C66080,0
29=RB,3,C65607,0
30=RB,4,C65615,0
31=PB,5,Cx02007370,x003C
32=RY,1,C65607,0 -{ELEV_TRIM_DN}-
33=RY,0,C65615,0 -{ELEV_TRIM_UP}-
34=RZ,1,C65607,0 -{ELEV_TRIM_DN}-
35=RZ,0,C65615,0 -{ELEV_TRIM_UP}-
36=PZ,4,C65561,0 -{PAUSE_TOGGLE}-
PollInterval=25[AutoSave]
Next=1
Interval=60
Files=10
SaveOnGround=No
AutoSaveEnabled=No[GPSout]
GPSoutEnabled=No[GPSout2]
GPSoutEnabled=No[WideServer]
WideFSenabled=Yes
AdvertiseService=No
Port=8002
Port2=9002
ProtocolPreferred=UDP
AllowShutdown=Yes
[Sounds]
Path=D:\fsx\Sound\
Device1=Primary Sound Driver
Device2=Speakers (Realtek High Definition Audio)
Device3=Realtek Digital Output (Realtek High Definition Audio)
Device4=MX613ST-4 (NVIDIA High Definition Audio)
Device5=MX613ST-0 (NVIDIA High Definition Audio)
Device6=MX613ST-C (NVIDIA High Definition Audio)[Axes]
0=TX,256,D,9,0,0,0
1=TY,256,D,10,0,0,0
2=TZ,256,D,23,0,0,0
3=TU,256,D,22,0,0,0
PollInterval=10
RangeRepeatRate=10
4=RX,256,D,7,0,0,0 -{ DIRECT: LeftBrake }-
5=RY,256,D,8,0,0,0 -{ DIRECT: RightBrake }-
6=RR,256,D,3,0,0,0 -{ DIRECT: Rudder }-
7=ZX,256,D,1,0,0,0 -{ DIRECT: Aileron }-
8=ZY,256,D,2,0,0,0 -{ DIRECT: Elevator }-
9=YX,256,D,1,0,0,0 -{ DIRECT: Aileron }-
10=YY,256,D,2,0,0,0 -{ DIRECT: Elevator }-
11=SX,256,D,7,0,0,0 -{ DIRECT: LeftBrake }-
12=SY,256,D,8,0,0,0 -{ DIRECT: RightBrake }-
13=SR,256,D,3,0,0,0 -{ DIRECT: Rudder }-[ClientNames]
1=SLAVE12
2=SLAVE13
3=SLAVE14[JoystickCalibration]
AllowSuppressForPFCquad=Yes
ExcludeThrottleSet=Yes
ExcludeMixtureSet=Yes
ExcludePropPitchSet=Yes
SepRevsJetsOnly=No
ApplyHeloTrim=No
UseAxisControlsForNRZ=No
FlapsSetControl=0
FlapDetents=Yes
ReverserControl=66292
Reverser1Control=66422
Reverser2Control=66425
Reverser3Control=66428
Reverser4Control=66431
MaxThrottleForReverser=256
AileronTrimControl=66731
RudderTrimControl=66732
CowlFlaps1Control=66162
CowlFlaps2Control=66163
CowlFlaps3Control=66164
CowlFlaps4Control=66165
SteeringTillerControl=0
MaxSteerSpeed=60
LeftBrake=-16380,16380/16
RightBrake=-16380,16380/16
FlapStarts=-16384,-13765,-9239,-6209,-2020,336,6755,10375,11868
Flaps=-16384,16380
FlapEnds=-14027,-10025,-7032,-3553,75,4292,10226,11607,13137
RudderBlendLowest=1[Traffic Limiter]
AirportPreference=50
PlannedAirportsPreference=50
GroundPreference=50
NearerPreference=50
TargetFrameRate=0
TrafficLimit=0 -
I changed the auto assign letters in the fsuicp5ini file to YES and reload the buttons in fsuicp. I now have the BUO836A interface back but still missing the throttles I will post the file.
-
I’ve been reading the user guide yep got that working thanks. I looked at my other pc one had done an auto update turning on the windows firewall the BUO836A Interface card is connected via this pc I have turned off the firewall and reloaded all pc but still nothing wondering if my issues are to do with the GUID’S I don’t really understand but the update could have changed the is numbers
-
I’ve got back the rudder and yoke but no throttle it is connected as it is registering in windows as input device game controller called Buo836a interface. I can calibrate throttles flaps and speed brake there. The fuel cut off levers are registering in fsuicp as buttons as well as park brake lever. flaps lever doesn’t work neither does speed brake. I don’t get it it was all working before I have copied the fsuicpini file with all the assignments like before but still nothing. I have turned off controllers in p3d to avoid conflict. The BUO836A (Bodnar card) is showing in list of contollers in p3dv4.5 something has changed I think with fsuicp as this is the interface. I checked all connections obviously connected as windows can see it.
all the axis and button assignments are also gone why would this be If they are in the ini file.
-
this the fsuicp5 config file the problem iam having is firstly the brakes dont come off the sim saying either differential brakes or just brakes. The right engine cut off lever on the throttle quad is changing views and also the trim switch on the yokes doing some thing. I have gone into the sim settings and removed all axis and key assignments to avoid a conflict. I have also tried to config some control setting in fsuicp like park brake but without a user manual i cant really work out what i should be doing.
i re calibrated controls in windows. Not sure if controls should be calibrated in prepar or just fsuicp im guessing just oneor the other as they would conflict? any ideas on how i can read the user manual?
[General]
UpdatedByVersion=5151
History=RCK7QB2GWAQ4199IPUN8A
MouseWheelMove=No
MouseWheelTrim=No
MouseWheelTrimSpeed=1
JoystickTimeout=20
PollGFTQ6=Yes
BlankDisplays=No
FixMachSpeedBug=No
AutoScanDevices=Yes
VisibilityOptions=No
OneCloudLayer=No
CloudTurbulence=No
CloudIcing=No
GenerateCirrus=No
SuppressCloudTurbulence=No
MaxIce=-4
MinIce=-4
UpperWindGusts=No
SuppressWindTurbulence=No
SuppressWindVariance=No
WindTurbulence=No
TurbulenceRate=1.0,5.0
TurbulenceDivisor=20,20,40,40
SuppressAllGusts=No
MaxSurfaceWind=0
WindLimitLevel=200
WindDiscardLevel=400
WindAjustAltitude=No
WindAjustAltitudeBy=2000
SmoothBySimTime=No
WindSmoothing=No
WindSmoothness=2
WindSmoothAirborneOnly=Yes
PressureSmoothness=0
TemperatureSmoothness=0
DisconnTrimForAP=No
ZeroElevForAPAlt=No
ThrottleSyncAll=No
WhiteMessages=No
ShowPMcontrols=No
SpoilerIncrement=512
MagicBattery=No
RudderSpikeRemoval=No
ElevatorSpikeRemoval=No
AileronSpikeRemoval=No
ReversedElevatorTrim=No
ClockSync=No
ClockSyncMins=5
ClearWeatherDynamics=No
OwnWeatherChanges=No
TimeForSelect=4
LoadFlightMenu=No
LoadPlanMenu=No
PauseAfterCrash=No
BrakeReleaseThreshold=75
SaveDataWithFlights=No
ZapSound=firework
ShortAircraftNameOk=No
UseProfiles=Yes
EnableMouseLook=No
AxesWrongRange=No
TCASid=Flight
TCASrange=40
AxisCalibration=No
DirectAxesToCalibs=No
ShowMultilineWindow=Yes
SuppressSingleline=No
SuppressMultilineFS=No
AxisIntercepts=No
DontResetAxes=No
InitDelay=0
GetNearestAirports=Yes
WeatherReadFactor=2
WeatherRewriteSeconds=1
LuaRerunDelay=66
Console=No
OOMcheck=Yes
InitDelayDevicesToo=No
PMDG737offsets=Auto
PMDG747offsets=Auto
PMDG777offsets=Auto
Annotate=Yes
UseSystemTime=No
UseMidMouseBtn=Yes
RestoreSimcWindows=No
DelayedMouseLookZoom=No
WideLuaGlobals=Yes
TextFileMaxRead=4095
TextFileNumbers=Yes
TextFilePhonetics=Yes
ThreadAffinityMask=x0
LuaAffinityMask=x0
LogOptionProtect=Yes
TimeForLuaClosing=2
TrafficStallTime=1
InitialStallTime=10
NormalStallTime=1
ComReadLoopTime=20
FSVersionUsed="Lockheed Martin® Prepar3D® v4",4.5.12.30293
SimConnectUsed=4.5.0.0[JoyNames]
AutoAssignLetters=No
T=G-Throttles << MISSING JOYSTICK >>
T.GUID={048B2C90-D690-11E1-8001-444553540000}
B=BU0836X Interface << MISSING JOYSTICK >>
B.GUID={2A723950-D706-11E1-8001-444553540000}
R=Saitek Pro Flight Rudder Pedals << MISSING JOYSTICK >>
R.GUID={7007B920-BD3B-11E1-8001-444553540000}
S=Saitek Pro Flight Rudder Pedals << MISSING JOYSTICK >>
S.GUID={75984520-D704-11E1-8001-444553540000}
Z=737YOKE-LE by ACE << MISSING JOYSTICK >>
Z.GUID={5EA0F8E0-D70D-11E1-8001-444553540000}
Y=737YOKE-LE by ACE << MISSING JOYSTICK >>
Y.GUID={B7B896E0-D70D-11E1-8002-444553540000}
1=Saitek Pro Flight Rudder Pedals
1.GUID={E98E5CA0-5C91-11E1-8006-444553540000}
2=737YOKE-LE by ACE
2.GUID={6368B4F0-476D-11E2-8001-444553540000}
3=737YOKE-LE by ACE
3.GUID={E98E5CA0-5C91-11E1-8009-444553540000}
4=Saitek Pro Flight Rudder Pedals
4.GUID={E98E5CA0-5C91-11E1-8005-444553540000}
0=BU0836A Interface
0.GUID={8C6FD830-FE13-11E2-8001-444553540000}[Buttons]
ButtonRepeat=20,10
13=P64,0,C66072,0 -{PITOT_HEAT_ON}-
14=U64,0,C66073,0 -{PITOT_HEAT_OFF}-
15=P64,1,C65591,0 -{SITUATION_RESET}-
16=P64,24,C65733,0 -{ABORT}-
17=P64,25,Cx02003320,xABCD -{offset word set, offset 3320}-
21=PT,0,Cx02000BC8,x0007
22=UT,0,Cx02000BC8,x0000
23=RT,3,C65602,0
24=UT,3,C65697,0
25=PB,0,Cx02000BC8,x0007
26=UB,0,Cx02000BC8,x0000
27=PB,1,C66079,0
28=PB,2,C66080,0
29=RB,3,C65607,0
30=RB,4,C65615,0
31=PB,5,Cx02007370,x003C
32=RY,1,C65607,0
33=RY,0,C65615,0
34=RZ,1,C65607,0
35=RZ,0,C65615,0
36=PZ,4,C65561,0
PollInterval=25
37=R0,6,C65752,0 -{PARKING_BRAKES}-
38=U0,6,C65752,0 -{PARKING_BRAKES}-[AutoSave]
Next=1
Interval=60
Files=10
SaveOnGround=No
AutoSaveEnabled=No[GPSout]
GPSoutEnabled=No
Port=COM1
Speed=4800
Interval=2000
PosTo6Decimal=No
SimModeIndicator=No
Sentences=[GPSout2]
GPSoutEnabled=No
Port=<none set>
Speed=4800
Interval=2000
PosTo6Decimal=No
SimModeIndicator=No
Sentences=[WideServer]
WideFSenabled=Yes
AdvertiseService=No
Port=8002
Port2=9002
ProtocolPreferred=UDP
AllowShutdown=Yes
[Sounds]
Path=D:\fsx\Sound\
Device1=Primary Sound Driver
Device2=Speakers (Realtek High Definition Audio)
Device3=Realtek Digital Output (Realtek High Definition Audio)
Device4=MX613ST-4 (NVIDIA High Definition Audio)
Device5=MX613ST-0 (NVIDIA High Definition Audio)
Device6=MX613ST-C (NVIDIA High Definition Audio)[Axes]
0=TX,256,D,9,0,0,0
1=TY,256,D,10,0,0,0
2=TZ,256,D,23,0,0,0
3=TU,256,D,22,0,0,0
4=RX,256,D,7,0,0,0
5=RY,256,D,8,0,0,0
6=RR,256,D,3,0,0,0
7=SX,256,D,7,0,0,0
8=SY,256,D,8,0,0,0
9=SR,256,D,3,0,0,0
10=ZX,256,D,1,0,0,0
11=ZY,256,D,2,0,0,0
12=YX,256,D,1,0,0,0
13=YY,256,D,2,0,0,0
PollInterval=10
RangeRepeatRate=10[ClientNames]
1=SLAVE12
2=SLAVE13
3=SLAVE14[JoystickCalibration]
AllowSuppressForPFCquad=Yes
ExcludeThrottleSet=Yes
ExcludeMixtureSet=Yes
ExcludePropPitchSet=Yes
SepRevsJetsOnly=No
ApplyHeloTrim=No
UseAxisControlsForNRZ=No
FlapsSetControl=0
FlapDetents=Yes
ReverserControl=66292
Reverser1Control=66422
Reverser2Control=66425
Reverser3Control=66428
Reverser4Control=66431
MaxThrottleForReverser=256
AileronTrimControl=66731
RudderTrimControl=66732
CowlFlaps1Control=66162
CowlFlaps2Control=66163
CowlFlaps3Control=66164
CowlFlaps4Control=66165
SteeringTillerControl=0
MaxSteerSpeed=60
LeftBrake=-16380,16380/16
RightBrake=-16380,16380/16
FlapStarts=-16384,-13765,-9239,-6209,-2020,336,6755,10375,11868
Flaps=-16384,16380
FlapEnds=-14027,-10025,-7032,-3553,75,4292,10226,11607,13137
RudderBlendLowest=1[Traffic Limiter]
AirportPreference=50
PlannedAirportsPreference=50
GroundPreference=50
NearerPreference=50
TargetFrameRate=0
TrafficLimit=0 -
Ok so I registered the widefs and now SIOC is seeing fsuicp and everything talking the only thing now is the controls in the sim are not functioning properly. I have checked the user manual and for some reason I can’t read it just a lot of characters. In the fsuicp.ini folder it says the is sim being used is Microsoft flight sim but I’m using prepar 3d v 4.5 I will try and screen shot some things see if this helps point to my problems.
FSUICP NEWBIE
in FSUIPC Support Pete Dowson Modules
Posted
I’m not real keen at this time to upgrade Prosim a little weary after this upgrade I will look into it. But I would have to install across 4 pc etc with mcp EFIS and displays running I would hate to upset those. At this time Prosim detects the throttle but I can’t calibrate or assign I really haven’t spent any time on Prosim I wanted to upgrade software before making switch and gauge assignments.
I think the sdk is a little out of depth for the moment I understand the principle but I don’t intend on writing programmes I’m still trying to work out SIOC scripting.
I will re calibrate the throttles, speed brake and ailerons. The ailerons appear easy but throttles a little different as well as speed brake have looked at some videos and the user manual but appreciate any advice here.