flash

Thanks for the reply. I'll purchase when out of beta.

Been using the beta version for FS2020 (thanks) for my serial port Precision flight controls yoke and throttle quadrant. I just want to confirm using fsuipc is the only way to make them all work together. I don't need any other functionality, ie cockpit build with avionics, just the flight controls. Want to make sure when it's available for purchase it's the right path to take.

Hello again John. Did a test.. started with the baron running autopilot for 90 mins. Wiggled the yoke every so often to confirm there is movement. No problems. Once on ground I switched airports and A/C (to the 747). After a few minutes I lost fsuipc in the system tray again, it was totally shut down. The log below: Using PFC serial yoke and quadrant plus ch rudder pedals. ********* FSUIPC7, Version 7.0.0-Beta (8th September 2020) by John & Pete Dowson ********* Windows 10 Home 64 Bit reported as Build 19041, Release ID: 2004 (OS 10.0) Reading options from "C:\Users\Rob1\Desktop\fsuipc7b\FSUIPC7.ini" Checking the Registrations now ... User Name="MSFS Tester" User Addr="Time Limited 311020" FSUIPC7 Key is provided WIDEFS7 not user registered, or expired 62 System time = 12/09/2020 13:51:20 62 FLT path = "C:\Users\Rob1\AppData\Local\Packages\Microsoft.FlightSimulator_8wekyb3d8bbwe\LocalState\" 78 ------------------------------------------------------------------- 93 Registered HotKey 'InvokeFSUIPCOptionsKey' (key=0x46, modifier=0x1) 109 FS path = "C:\Users\Rob1\AppData\Local\Packages\Microsoft.FlightSimulator_8wekyb3d8bbwe\LocalCache\Packages\" 109 ---------------------- Joystick Device Scan ----------------------- 109 Product= CH Pro Pedals USB Rudder Pedals 109 Manufacturer= CH Products 109 Vendor=068E, Product=0501 (Version 2.35) 156 GUIDs returned for product: VID_068E&PID_0501: 156 GUID= {B10EEB80-F10E-11E6-8001-444553540000} 156 Details: Btns=1, POVs=(0, 0, 0, 0), Cal=x00000000, Max=R0,U0,V0,X255,Y255,Z255 156 ------------------------------------------------------------------- 171 Device acquired for use: 171 Joystick ID = 0 (Registry okay) 171 0=CH Pro Pedals USB Rudder Pedals 171 0.GUID={B10EEB80-F10E-11E6-8001-444553540000} 171 ------------------------------------------------------------------- 187 LogOptions=00000000 00000001 218 Loaded PFCcom64.DLL okay! 3078 Simulator detected 8171 SimConnect_Open succeeded 8171 Running in "KittyHawk", Version: 11.0.282174.999 (SimConnect: 11.0.62651.3) 8171 MSFS version = 11.0.282174.999 8171 Initialising SimConnect data requests now 8187 flights\other\MainMenu.FLT 8187 SimObjects\Airplanes\Asobo_B787_10\aircraft.CFG 8203 User Aircraft ID 1 supplied, now being used 8234 Aircraft loaded: running normally now ... 8640 System time = 12/09/2020 13:51:28, Simulator time = 17:49:41 (17:49Z) 8640 Aircraft="Boeing 787-10 Asobo" 16625 -------------------- Starting everything now ---------------------- 225343 C:\Users\Rob1\AppData\Local\Packages\Microsoft.FlightSimulator_8wekyb3d8bbwe\LocalCache\Packages\Official\OneStore\asobo-aircraft-baron-g58\SimObjects\Airplanes\Asobo_Baron_G58\aircraft.CFG 225343 Sim stopped: average frame rate for last 217 secs = 59.9 fps 225343 Max AI traffic was 0 aircraft 225343 ------------------------------------------------------------------- 225953 Aircraft="Asobo Baron G58" 228515 Planned flight from KOPN to KEVB 228515 C:\USERS\ROB1\APPDATA\LOCAL\PACKAGES\MICROSOFT.FLIGHTSIMULATOR_8WEKYB3D8BBWE\LOCALSTATE\MISSIONS\CUSTOM\CUSTOMFLIGHT\CUSTOMFLIGHT.PLN 228843 C:\Users\Rob1\AppData\Local\Packages\Microsoft.FlightSimulator_8wekyb3d8bbwe\LocalState\MISSIONS\Custom\CustomFlight\CustomFlight.FLT 624437 ---------------------- Joystick Device Scan ----------------------- 624437 Product= CH Pro Pedals USB Rudder Pedals 624453 Manufacturer= CH Products 624453 Vendor=068E, Product=0501 (Version 2.35) 624453 GUIDs returned for product: VID_068E&PID_0501: 624453 GUID= {B10EEB80-F10E-11E6-8001-444553540000} 624453 Details: Btns=1, POVs=(0, 0, 0, 0), Cal=x00000000, Max=R0,U0,V0,X255,Y255,Z255 624453 ------------------------------------------------------------------- 624453 Device acquired for use: 624453 Joystick ID = 0 (Registry okay) 624453 0=CH Pro Pedals USB Rudder Pedals 624453 0.GUID={B10EEB80-F10E-11E6-8001-444553540000} 624453 ------------------------------------------------------------------- 5497375 **** Restarting traffic scanning due to non-reception **** 7116078 Sim stopped: average frame rate for last 6873 secs = 59.6 fps 7116078 Max AI traffic was 87 aircraft 7116078 ------------------------------------------------------------------- 7120359 flights\other\MainMenu.FLT 7168312 C:\Users\Rob1\AppData\Local\Packages\Microsoft.FlightSimulator_8wekyb3d8bbwe\LocalCache\Packages\Community\liveries-747\SimObjects\Airplanes\Asobo_B747_8i\aircraft.CFG 7168312 Sim stopped: average frame rate for last 41 secs = 58.8 fps 7168312 Max AI traffic was 1 aircraft 7168312 ------------------------------------------------------------------- 7169296 Aircraft="Boeing 747-8i Asobo" 7171796 C:\Users\Rob1\AppData\Local\Packages\Microsoft.FlightSimulator_8wekyb3d8bbwe\LocalState\MISSIONS\Custom\CustomFlight\CustomFlight.FLT 7214531 **** Restarting traffic scanning due to non-reception **** 8007031 TransmitClientEvent failed! (Event=65763, Param=0, nGroup=0, fSame=0 8007031 **** Too many TransmitClientEvent errors received! Re-connecting now ... **** 8007281 SimConnect_Open succeeded 8007281 Running in "KittyHawk", Version: 11.0.282174.999 (SimConnect: 11.0.62651.3) 8007281 MSFS version = 11.0.282174.999 8007281 Initialising SimConnect data requests now 8007281 User Aircraft ID 1 supplied, now being used 8007296 SimObjects\Airplanes\Asobo_B747_8i\aircraft.CFG 8007359 System time = 12/09/2020 16:04:47, Simulator time = 16:04:50 (20:04Z) 8023531 TransmitClientEvent failed! (Event=65763, Param=547, nGroup=0, fSame=0 8023531 **** Too many TransmitClientEvent errors received! Re-connecting now ... **** 8023546 TransmitClientEvent failed! (Event=65763, Param=6579, nGroup=0, fSame=0 8023546 **** Too many TransmitClientEvent errors received! Re-connecting now ... **** 8023781 SimConnect_Open succeeded 8023781 Running in "KittyHawk", Version: 11.0.282174.999 (SimConnect: 11.0.62651.3) 8023781 MSFS version = 11.0.282174.999 8023781 Initialising SimConnect data requests now 8023781 User Aircraft ID 1 supplied, now being used

Thank you John. I have removed the extra files and will do some tests and get you an updated log file. Also, When fsuipc shuts down it is no longer in the system tray. The simulator was still running.

Hello. Not quite sure if this should go into the disconnect thread. I, like others in that thread, have occasional disconnects using fsuipc7. I would have to 'exit' out of fsupic and restart it to take effect again. It would then run the com1 check. Lately though when I go to the taskbar to shut it down I find that it has already done on its own. It is no longer running. I am only using the serial version of PFC jetliner yoke and throttle quadrant plus USB CH rudder pedals. I have the latest download of fsuipc7 and also downloaded and added to the folder the PFC.dll. Below is the contents of of my fsuipc folder. I assume i don't add the PFChid file.