Squick

I'm sorry for my late reply. Here are the logs frome wideserver and wideclient. I just realised they're not from the same session and that the wideserver.log is quiet strange looking. ********* WideClient Log [version 6.51] Class=FS98MAIN ********* Date (dmy): 27/09/06, Time 18:09:53.734: Client name is ORDI2 94 Attempting to connect now 469 Server = ORDI1 485 Trying TCP/IP host "ORDI1" port 8002 ... 485Okay, IP Address = 192.168.1.7 485 Connection made okay! 4766 New Client Application: "pfd" (Id=352) 17297 ****** End of session performance summary ****** 17297 Total time connected = 15 seconds 17297 Reception maximum: 24 frames/sec, 5275 bytes/sec 17297 Reception average whilst connected: 25 frames/sec, 4829 bytes/sec 17297 Transmission maximum: 4 frames/sec, 796 bytes/sec 17297 Transmission average whilst connected: 1 frames/sec, 134 bytes/sec 17297 Max receive buffer = 952, Max send depth = 4, Send frames lost = 0 17297 **************** Individual client application activity **************** 17297 Client 352 requests: 975 (Ave 65/sec), Data: 1065355 bytes (71023/sec), Average 1092 bytes/Process 17297 ********* Log file closed (Buffers: MaxUsed 5, Alloc 1380 Freed 1380 Refused 0) ********* and the server : ********* WideServer.DLL Log [version 6.51] ********* Blocksize guide = 4096 (double allowed) Date (dmy): 27/09/06, Time 16:51:26.031: Server name is ORDI1 57907 Initialising TCP/IP server 58094 Initialising IPX/SPX server 58094 IPX/SPX socket() failed [Error=10047] Address family not supported by protocol family 58094 Failed to start IPX/SPX Server 58344 Broadcasting service every 1 mSecs 59282 Incoming connection Accepted ok (skt=316) 59391 Connected to computer "ORDI2" running WideClient version 6.510 (skt=316) 349235 Error 10053: client socket disconnected at Client: removing (skt=316) 357328 Incoming connection Accepted ok (skt=464) 357375 Connected to computer "ORDI2" running WideClient version 6.510 (skt=464) 588157 Error 10053: client socket disconnected at Client: removing (skt=464) 679860 Incoming connection Accepted ok (skt=372) 679938 Connected to computer "ORDI2" running WideClient version 6.510 (skt=372) 716516 Error 10053: client socket disconnected at Client: removing (skt=372) 726578 Incoming connection Accepted ok (skt=464) 726703 Connected to computer "ORDI2" running WideClient version 6.510 (skt=464) 801516 Error 10053: client socket disconnected at Client: removing (skt=464) 865844 Incoming connection Accepted ok (skt=460) 865891 Connected to computer "ORDI2" running WideClient version 6.510 (skt=460) 882766 Error 10054: client socket disconnected at Client: removing (skt=460) 1101391 Closing down now ... Memory managed: Offset records: 836 alloc, 836 free Throughput maximum achieved: 24 frames/sec, 13575 bytes/sec Throughput average achieved for complete session: 3 frames/sec, 1234 bytes/sec Average receive rate from "ORDI2": 0 frames/sec, 7 bytes/sec ********* Log file closed ********* I know this isn't much but we are really stuck on that. On the network everything seems ok. Both computers are in the same workgroup. Thanks a lot

Good morning, I'm a 777 pitbuilder. Willing to use project magenta I installed FSUIPC and Wideserver.dll in the module folder of the main computer (along with the various .ini files). On the second computer Project magenta is installed with wideclient.exe and wideclient.ini (Run1="PMadress").When i open Wideclient, FS2004 detects 1 client and the status bar shows "connected". However PM does not connect and shows "Avionics off". It is the same problem with open source gauges like freeFD for example. I'm pretty sure I made no mistake in versions between Wideclient and wideserver and that the installation is clean Thanks fo your time squick PS: both softs are registered