Jump to content
The simFlight Network Forums

marcgeerts

Members
 View Profile  See their activity

  • Posts

    30

  • Joined

  • Last visited

 Content Type 

Posts posted by marcgeerts

  4. 4.316 interim "forgets" button assignments

    in FSUIPC Support Pete Dowson Modules

    Posted

    OK,

    Let me add my little bit of misery too.I also keep loosing an assign.I assigned 3 buttons on a second joy to open panel windows for the PMDG 747 FSX version. beeing the overhead, central pedestal and the throttle and I keep loosing the throttle assigened button{that is assigned to open panel8}.Tried both aircraft specifec and none specific.

    I start my FSX with the default boeing and then change to the PMDG 747X.

    Regards...Marc

  7. SB assigns

    in FSUIPC Support Pete Dowson Modules

    Posted

    I have a question/request?If I remember correctly one can those sb commands{standby,normal and ident}assign to a button.I have 3 joystick buttons to which I want to assign those commands to.

    Is there anybody who can explain me exactly how to{maybe step by step with parameters if needed.I know I'm not too clever} assign those 3 joystick buttons so I can use them to set the right sb mode and ident?Would be much appreciated.I think its done with fsuipc but that's as far as my knolledge goes.

    Regards...Marc

  9. Macro prob

    in FSUIPC Support Pete Dowson Modules

    Posted

    Hi Pete,

    I try to assign joystick buttons to the PMDG 747X fuel cuttoff leavers on the throttle window via the macro abillity.I followed the user guide to the letter I think but I get no result just one leaver is working. i think it has to do with the click area {rectangle?}.

    Here is the macro file

    [Macros]

    Module="PMDG_747400_Center.DLL"

    1=Fuel cutt eng 1=R1

    2=Fuel cutt eng 2=R1

    3=Fuel cutt eng 3=R1

    4=Fuel cutt eng 4=R1

    So when I click a lever it switches all 4 for that matter but when I press TAB to test only the first one most left one switches.

    Hope this can be sorted out?Help much appreciated.

    Regards...Marc

  10. simconnect prob

    in FSUIPC Support Pete Dowson Modules

    Posted

    Hi Pete,

    Thx for following up.I been checking the planner site aswell.But I start thinking my system must haunted lol.

    Now when I try that openport tool I get only two collums with result:protocoll{which all are TCP} and PID{two times 81.465.166.201and ten times 0.0.0.0}All other collums stay empty.I think I tried everything possible to get results.

    Only last thing I can think off is that because I use VISTA 32 something gets blocked are messed up.Slowly starting to go insane lol.Only comfort is that I noticed on the planner forum that I'm not alone.

    Regards ...Marc

  11. simconnect prob

    in FSUIPC Support Pete Dowson Modules

    Posted

    Hi Peter,

    A last update maybe.Did exactly as you described but for me to no avail.Prob persists.FSXPlanner works even connected to FSX but then it's like something prohibits any other communication to FSX the moment I put the xml file in the fsx folder.That means like I stated before:no addons menu,by which no joystick activity,and no com radio communication even though I see the icon of goflight prog in systemtray.As soon as I remove the xml file all goes back to normal.

    So I start to think there might be something wrong with my system.Guess I'll have to do a complete re-install at some point.But for now it'll have to do like it is.In the end I can live without FSXPlanner lol.

    But anyway thank you SO MUCH for all your troubble and your patience with me.

    Regards...Marc

    PS:Had same prob with the new fsuipc version,FSX hanging {in my case the moment I touched joystick}.But that already happened to me with the 4.126 version for which I got a workaround by letting it make a new ini file.But anyway allis ok now with new 4.151 version.

  13. simconnect prob

    in FSUIPC Support Pete Dowson Modules

    Posted

    Hi Peter,

    It's me once more.I sawour post at the planner forum from wich I can maybe understand yorogram out and know how to get it working connection included?I'm interested in a realy step by step instruction how to since I only read those Dummies books lol :wink: .Where to put what and so on?I even can give you my email if wanted.

    I know it's still just a beta but it looks promissing.I'm eager to lrarn.

    Regards ...Marc

  14. simconnect prob

    in FSUIPC Support Pete Dowson Modules

    Posted

    Hi Peter,

    I think i tried everything now also without neither file but to no avail.That FSXPlanner works fine, the prob is the connection with FSX.I tried to attach the prog before but too big.It's a new {bete} prog afcad like to edit airports.When connected to FSX I planned to use it as kinda moving map also at airports where I don't know my way around and when flying online I could find way to RW or sate when instructed by atc.And ofcorse to edit airports connected to FSX to exactly put things in.Like I said the prog itself works fine but the connection with FSX to get airplane position is a mess { for me at least}.Let me give you the url so maybe you can take a look at it and come up with a solution?;>}

    http://www.zbluesoftware.com/fsxplanner/

    Regards...Marc

  15. simconnect prob

    in FSUIPC Support Pete Dowson Modules

    Posted

    Hi Peter,

    Thx anyway for ur help.I know this isn't prob the right place but I got the idea that the people on the planner forum aren't exactly sure what they are doing or how things work.So I gave it a try here anyway.

    So yes I only use one pc.So if I understand correctly I need neither xml nore cfg filed for thar simconnect?

    Rely THX AGAIN for ur much appreciated help.

    Regards...Marc

  16. simconnect prob

    in FSUIPC Support Pete Dowson Modules

    Posted

    Hi Peter,

    Thx for the reply.

    Ok if I do remove the sinconnect.xml file all is ok and fsxplanner works but won't connect to FSX.If I delete last portion{remote} from it still same prob.So the moment there's that simconnect.xml file in the FSX folder things stuff up.

    Yes there is a simconnect.cfg file {see text below} wich is in the local fsxplanner folder{the folder where to I unzipped downloadaed file }.Maybe that cfg file needs to go some place else?

    Regards...Marc

    Simconnect.cfg:

    [simConnect.0]

    Protocol=IPv4

    Address=10.1.0.6

    Port=48447

    MaxReceiveSize=4096

    DisableNagle=0

    [simConnect.2]

    Protocol=IPv4

    Address=10.1.0.6

    Port=48447

    MaxReceiveSize=4096

    DisableNagle=0

    [simConnect.6]

    Protocol=IPv6

    Address=fe80::217:31ff:fe16:e986

    Port=48447

  17. simconnect prob

    in FSUIPC Support Pete Dowson Modules

    Posted

    Hi Peter,

    Don't lnow if this is right forum but give it a try anyway.Trying to use the new FSXPlanner prog wich connects to FSX now via simconnect.Instructions are to put the simconnect.xml file in the FSX folder {you know the one where also reside dll.xml and exe.xml}Below I pasted the xml text.Ok the fsxplanner works, it connects to FSX but the prob is the moment that cimconnect.xml is in the fsx folder I lose my addons menu and thus joystick since assigned via fsuipc{latest and registered} nor does that goflicht exe for my radios,flaps and trim no longer work;that prig loads cause I have an icon in sys tray but GoFlight modules stay blank and finaly when trying to load my leveld plane I get an error sying simconnect session open failure.When I remove that simconnect.xml file from the FSX folder all is back to normal again.

    Any light on this maybe?

    Regards...Marc

    PS I tried to get a simconnect log file like described in sticky but for some obscure reason I don't see one in the c:\root {I'm using Vista 32,FSX withSP1 latest fsuipc version registered goflight radio and flaps/gear module and addons leveld 767 }

    Simconnect.xml text:

    <?xml version="1.0" encoding="Windows-1252"?>

    SimConnect

    SimConnect.xml

    False

    False

    IPv4

    local

    64

    4096

    False

    False

    IPv4

    local

    127.0.0.1

    64

    48447

    4096

    False

    False

    IPv4

    global

    192.168.1.103

    64

    48447

    4096

    False

    FSUIPC log:

    ********* FSUIPC4, Version 4.126 by Pete Dowson *********

    User Name="Marc Geerts"

    User Addr="post.marc@telenet.be"

    FSUIPC4 Key is provided

    WIDEFS7 not user registered, or expired

    Running inside FSX on Windows Vista (SimConnect SP1 May07)

    Module base=61000000

    DebugStatus=15

    78 System time = 10:24:12

    78 FLT UNC path = "C:\Users\Marc\Documents\Flight Simulator X Files\"

    78 FS UNC path = "E:\Program Files\Microsoft Games\Microsoft Flight Simulator X\"

    1217 LogOptions=00000001

    1326 Failed on SimConnect_Open, return = 0x80004005: FSUIPC4 cannot operate!

    16364 **** Retrying SimConnect connection****

    16458 Failed on SimConnect_Open, return = 0x80004005: FSUIPC4 cannot operate!

    31465 **** Retrying SimConnect connection****

    31574 Failed on SimConnect_Open, return = 0x80004005: FSUIPC4 cannot operate!

    51855 **** Retrying SimConnect connection****

    51948 Failed on SimConnect_Open, return = 0x80004005: FSUIPC4 cannot operate!

    66971 **** Retrying SimConnect connection****

    67065 Failed on SimConnect_Open, return = 0x80004005: FSUIPC4 cannot operate!

    84209 System time = 10:25:37

    84209 *** FSUIPC log file being closed

    Memory managed: 2 Allocs, 2 Freed

    ********* FSUIPC Log file closed ***********

  19. FSUIPC 3.712

    in FSUIPC Support Pete Dowson Modules

    Posted

    Hi Pete,

    Good find, gr8 job, again a prob solved very quickly.

    ********* FSUIPC, Version 3.715 by Pete Dowson *********

    Verifying Certificate for "D:\Program Files\Microsoft Games\Flight Simulator 9\MODULES\FSUIPC.dll" now ...

    SUCCESS! Signature verifies okay!

    Running inside FS2004 (FS9.1 CONTROLS.DLL, FS9.1 WEATHER.DLL)

    User Name="Marc Geerts"

    User Addr="madana@pandora.be"

    FSUIPC Key is provided

    I guess this was team effort.Much appreciated.

    Regards...Marc

  20. FSUIPC 3.712

    in FSUIPC Support Pete Dowson Modules

    Posted

    Pete

    I'm running WinXP, SP2.Yes, running FSUIPC4, v4.064 on the same system and that is working ok.version number WinTrust.DLL 5.131.2600.2180, dated 4 augustus 2004.

    Here is a log file after installing version 3.714 and FS beeing closed.

    ********* FSUIPC, Version 3.714 by Pete Dowson *********

    Verifying Certificate for "D:\Program Files\Microsoft Games\Flight Simulator 9\MODULES\FSUIPC.dll" now ...

    FAILURE! "WinVerifyTrustEx" error 0x80092003:

    This return is non-standard, possibly specific to trust provider

    Running inside FS2004 (FS9.1 CONTROLS.DLL, FS9.1 WEATHER.DLL)

    User Name="Marc Geerts"

    User Addr="madana@pandora.be"

    FSUIPC Key is provided

    WIDEFS not user registered, or expired

    Module base=61000000

    ClassOptions: UIPCMAIN=FF7F, FS98MAIN=FF7F, FS2KMAIN=FF5E

    WeatherOptions(Orig)=4000B7AF[4000B7AF]

    InitDelay: 0 seconds

    WeatherReadInterval=4

    LogOptions=00000001

    DebugStatus=15

    26844 System time = 20:09:39

    26860 D:\Program Files\Microsoft Games\Flight Simulator 9\

    26860 System time = 20:09:39, FS2004 time = 12:00:00 (00:00Z)

    98735 C:\Documents and Settings\Marc Geerts\Mijn documenten\Flight Simulator Files\Ace's Startup.flt

    99110 AIRCRAFT\PMDG747-400\B747-400.air

    99297 Aircraft="747-400 Lufthansa"

    140141 Clear All Weather requested: external weather discarded

    155203 System time = 20:11:48, FS2004 time = 20:11:34 (20:11Z)

    155203 *** FSUIPC log file being closed

    Memory managed: 0 Allocs, 0 Freed

    ********* FSUIPC Log file closed *** *******

    Regards...Marc

  21. FSUIPC 3.712

    in FSUIPC Support Pete Dowson Modules

    Posted

    Hi Pete, think I have a prob of different kind.When putting version 3.714 in the modules folder (and same with previous version 3.712 and I am registered user) when I start FS9 I get an error message stating: "FSUIPC version too old.Need at least version 3.48 or later.Flight Simulator will close now.".When putting version 3.71 back in all goes well.Any ideas?

    Much appreciated.

    Regards...Marc

  25. istall and update FSUIPC4

    in FSUIPC Support Pete Dowson Modules

    Posted

    Hi Peter,

    Thx for the reply.About the repzatedly binstall, Ihad version 4,023 installed and tried to update it with version4,026.That's how I found those things out.

    The modules folder wasn't hidden.But aal the installation files from FSUIPC4 were.Except for the ini, key and log file after running FSX were showing.Only after I changed display properties in extra,folder options, display where I unchecked the item "Hide Secured system files (recommendedà" wich by default was checked I got to see the FSUIPC4 files.And all those files are marked read only and hidden(hidden checkbox grayed out but checked)I could uncheck the read only thing but like I said not the hidden check(grayed out).

    And yes as long as a FSUIPC4.DLL is in the modules folder when I tried to update I got that error message like mentioned before.Only after I manually remove the DLL I'm able to install the new version.Hope this helps.

    Regards...Marc

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use. Guidelines Privacy Policy We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.