Jump to content
The simFlight Network Forums

DavyC

Members
 View Profile  See their activity

  • Posts

    9

  • Joined

  • Last visited

 Content Type 

Posts posted by DavyC

  1. Sound Issues FSUIPC Closing

    in FSUIPC Support Pete Dowson Modules

    Posted

    Hi

     

    I have just installed PMDG 737NGX and FS2Crew

     

    I am having the following issue.

     

    I have done a few 4+ hour flights Heathrow to Larnaca.

     

    All goes well until I start the descent phase.

     

    When I start using my headset the sim freezes for about 2-3 seconds and runs for 2-3 seconds - this gets slightly better but unworkable.  I close the flight sim and restart from an autosave and no issues.

     

    Here is the strange bit FSUIPC disappears from the add-on menu and the auto saves stop as soon as this starts.

     

    I have checked all the sound drivers and USB drivers (USB headset) and they all seem up to date.

     

    I had similar issues with sound in the PMDG 777 however when I changed the sound set in the 777 control panel it improved dramatically but did not take it away completely.

     

    P3D V3

    Windows 10 - I strongly suspect is the culprit

    FSUIPC latest version I think 'k'

     

    I have all SDK's loaded and re-installed the P3D V3.2 SDK to be sure to be sure

    Re-intsalled P3D PMDG FS2Crew - FSUIPC

     

    Is this the USB ports going to sleep  - I do not know how to check but the headset will work.  Sounds seem a little funny, eg the engine sound dims or fluctuates more than at the start of the flight.

     

    There seems to be nothing strange in the FSUIPC log - currently trying another flight and will check log when it happens again.

     

    I only post here due to FSUIPC dropping off - when this happens - hoping that somebody could point me in the right direction.

     

    Thanks

     

    Davy C

  2. Crash P3D V3.1 when not at default airport

    in FSUIPC Support Pete Dowson Modules

    Posted

    Pete

     

    Sorry I deleted and uninstalled everything.  Added a new SSD drive and installed everything onto it.  Works a treat now.. so don't know what caused the problem.

     

    I have discovered that soon before this started to happen I installed one of my old UK2000 airport scenery and used an FSX version by mistake.  This created an entry in the registry that pointed FSX to the PSD v3 folder, I never had FSX on this pc - I really have no idea if that caused the problem but it is gone in any case...

     

    Once again thanks for taking the time to answer my problems

     

    Davy C

  3. Crash P3D V3.1 when not at default airport

    in FSUIPC Support Pete Dowson Modules

    Posted

    Hi

     

    Still stumped

     

    I have uninstalled v3.1 and installed v3.2 - same errors.

     

    I have

     

    EZDok

    Orbx Global

    Orbx Vectors

    UK2000 Gatwick, Leeds and Cardiff

    ASN

    Virtual Avionics

     

    I unloaded Ezdok - no change

    I uninstalled Orbx no

    I uninstalled UK2000 no change

    I uninstall ASN

     

    I changed the dll.xml file no change

    I deleted cfg files and rebuilt - no change

     

    I have found that the FSUIPC does not appear in the menu unless the loader dll file is in the modules folder

     

    I think it is a sim connect issue.

     

    I have P3D sim connect 3.2

    and 4 versions of Microsoft installed including a Microsoft ESP ver 1.xxxx  I have tried different settings with these present and missing but no change

     

    When the loader dll file is not in the modules folder no crashing but no FSUIPC

     

    The airports are very hit and miss but does not like any UK airport default or otherwise.

     

    Going to bed spent 8 hours plus today at this - head swimming it will be something simple I hope when I get home from work tomorrow.

     

    Thanks

     

    DC

  4. Crash P3D V3.1 when not at default airport

    in FSUIPC Support Pete Dowson Modules

    Posted

    Pete

     

    Appreciate your help.

     

    I double checked but FSUIPC is higher up the DLL file than ASN.

     

    ASN is just a new install and I haven't had it running on these tests as it is on another pc.

     

    I changed the name of the two dll files SIM1 and Visualfx to .old files and ran the p3d repair function, which created new files - no difference. 

     

    I have uninstalled and re-installed FSUIPC as this is the easy option.  I have noted that the crashes only happen when I select an airport in Europe.

     

    I am reluctant to uninstall P3D as I have spent 3-4 weeks building up my software and systems on a new pc

     

    I think the best option is to uninstall and re-install V3.2

     

    Thanks again for your help it is appreciated.

     

    DC

  5. Crash P3D V3.1 when not at default airport

    in FSUIPC Support Pete Dowson Modules

    Posted

    Hi

     

    Pulling my hair out with this

     

    If I load default aircraft and default airport - no issues

     

    If I load default aircraft and any other airport - immediate crash

     

    If I uninstall FSUIPC works fine

     

    I get these two lines at end of log when it crashes

     

    35680 Hook Error: can't find .1617821344 in SIM1.dll

    35680 Hook Error: can't find .1617821344 in VISUALFX.dll

     

    These two files are in the root P3d V3 folder albeit in lower case

     

    I am using

     

    windows 10  says windows 8 in FSUIPC log

    Prepare3D V3.1   version 3.01.2.15831

    FSUIPC 4.949h

     

    ********* FSUIPC4, Version 4.949h by Pete Dowson *********
    Prepar3D.exe version = 3.1.2.15831
    Reading options from "C:\Lockheed Martin\Prepar3D v3\Modules\FSUIPC4.ini"
    Running inside Prepar3D v3 on Windows 8.0
    Module base=60630000
    User Name="xxxx xxxxxx"
    User Addr="xxxx@xxxxxxxxxxxxxxxxx"
    FSUIPC4 Key is provided
    WIDEFS7 not user registered, or expired
         1610 System time = 08/03/2016 15:53:51
         1610 FLT path = "C:\Users\davyc\Documents\Prepar3D v3 Files\"
         1610 ------ Module Version Check ------
         1610        acontain.dll: 3.1.2.15831
         1610             api.dll: 3.1.2.15831
         1610        controls.dll: 3.1.2.15831
         1610      fs-traffic.dll: 3.1.2.15831
         1610             G3D.dll: 3.1.2.15831
         1610        language.dll: 3.1.2.15831
         1610            sim1.dll: 3.1.2.15831
         1610        visualfx.dll: 3.1.2.15831
         1610         weather.dll: 3.1.2.15831
         1610          window.dll: 3.1.2.15831
         1610 ----------------------------------
         1610 Trying C:\Lockheed Martin\Prepar3D v3\Modules\SimConnectP3D2.dll
         1610 Found it: trying to connect
         1610 FS path = "C:\Lockheed Martin\Prepar3D v3\"
         1797 ---------------------- Joystick Device Scan -----------------------
         1797 Product= Saitek Pro Flight Rudder Pedals
         1797    Manufacturer= Saitek
         1797    Vendor=06A3, Product=0763 (Version 1.1)
         1797    Serial Number= Saitek
         1797 Product= Saitek Pro Flight Yoke
         1797    Manufacturer= Saitek
         1797    Vendor=06A3, Product=0BAC (Version 3.4)
         1797    Serial Number= Saitek
         1797 -------------------------------------------------------------------
         1813 LogOptions=00000000 00000001
         1813 -------------------------------------------------------------------
         1813 ------ Setting the hooks and direct calls into the simulator ------
         1813 --- CONTROLS timer memory location obtained ok
         1813 --- SIM1 Frictions access gained
         1829 ASN active function link set
         1829 --- FS Controls Table located ok
         1829 --- Installed Mouse Macro hooks ok.
         1829 Wind smoothing may be by ASN, not FSUIPC, if it is running
         1829 Will switch smoothing action when ASN starts/stops
         1829 --- All links okay (except older global weather setting method)
         1829 -------------------------------------------------------------------
         1829 SimConnect_Open succeeded: waiting to check version okay
         1829 Trying to use SimConnect Prepar3D
         1829 Running in "Lockheed Martin® Prepar3D® v3", Version: 3.1.3.1 (SimConnect: 3.1.0.0)
         1829 Initialising SimConnect data requests now
         1829 FSUIPC Menu entry added
         1844 C:\Users\davyc\AppData\Local\Lockheed Martin\Prepar3D v3\Prepar3D_Default.fxml
         1844 C:\Lockheed Martin\Prepar3D v3\SimObjects\Airplanes\IRIS Raptor Driver\Raptor.air
        26672 System time = 08/03/2016 15:54:16, Simulator time = 08:00:01 (07:00Z)
        26672 Aircraft="F-22 Raptor - 525th Fighter Squadron"
        27688 Starting everything now ...
        27766 Ready for ASN WX radar
        35860 Hook Error: can't find .1617821344 in SIM1.dll
        35860 Hook Error: can't find .1617821344 in VISUALFX.dll

     

    I have ASN and Aivlasoft EFB on another PC in LAN and working with SimConnect with no issues???

     

    Any help appreciated.

     

    Davy C

    Unable to get drives in dbmanager

    in (Former) FS Commander Support Forum

    Posted

    Hi

    I switched the uac off and it now shows all the network dives and runs an update but I get an error that the country file has 0 bytes which yes it has I have checked the error log and get this

    FSC · Version 8.6 · Build:200210 - 17/04/2010 00:51:22

    Application path: C:\FSC

    ReadIni successful (True)

    SetFSVersion successful (True)

    SetCurrentFSPath successful (True)

    SetFlightplanFolders successful (True)

    DecryptIvaoPWord successful (True)

    ReadRegister successful (True)

    Unregistered version Z

    AIRAC-0911 Rev.1 - OCT22-NOV18/09

    ReadAirac successful (True)

    ReadAircraft successful (True)

    Initializing counters successful (True)

    Opening MagVar file successful (True)

    C:\FSC\database\FS09\region.fsc = 34

    C:\FSC\database\FS09\country.fsc = 0

    Exit in ErrorFileEmpty

    Logfile Closed at: 17/04/2010 00:51:32

    Everything is still being run in administrator role amd the file is there just 0 bytes

    what am I missing before I pull all my hair out

    Thanks

    DC

    Unable to get drives in dbmanager

    in (Former) FS Commander Support Forum

    Posted

    Hi

    I am using

    FS9.1 on main computer with Vista 32 Home Edition

    FSUIPC latest version 3.**

    Using Wideclient latest version

    Using laptop with vista 32 home

    Running everything as administrator

    Everything was working okay, I was carrying out flights and able to see them on FSC on the laptop.

    I then decided to save some flights back to the PMDG folder on FS9 on main computer, this did not work. I tried the windows options window and the F drive (my FS9 folder on main computer) was not visible. I went to explorer and it was there and I entered the folder and browsed around no problems. i checked the database manager and the F drive was visible.

    After much mucking around I foolishly removed FSC8.6 and reinstalled. I now cannot get the F drive visible in the database mamager so I cannot get anything to work. I can enter the drive in windows explorer. I can save files in notepad back to the F drive, it will just not appear in the database manager.

    I have tried several uninstalls and re-installs, tried it with wide client running and not running. Opened and explored the F drive before starting tha manager. Checked and double checked network names and work groups etc. Everything seems to work except FSC.

    Next stage is to remove 8.6 and install 8.5 and try that!!

    Any help appreciated.

    Davy C

    Mouse over

    in (Former) FS Commander Support Forum

    Posted

    Hi

    I use two screens from the same graphics card. The main screen I use for flight sim and I keep FSC on the second screen. If I move my mouse onto the FSC monitor it activates the FSC window without a click. This holds when I bring the mouse back onto the main screen or Flight Sim monitor. It can happen that I try and change something on the flight sim by clicking the mouse or scrolling the wheel but FSC changes. (not the worst problem in the world)

    I drag my IVAP window onto my FSC monitor but I cannot get my mouse into the IVAP window again because as I move the mouse over FSC it activates the FSC window (no clicks) and hides the IVAP window.

    I did notice on FSC 8.5 when I selected a flight plan from a list it jumped it straight onto the screen without double clicking or clicking ok - however this is fixed in 8.6 thanks for that.

    Thanks for a great package - a little help if possible on the mouse over effect woud be great

    Thanks

    Davy C

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use. Guidelines Privacy Policy We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.