Abrupto

January 26, 2011

Actually the latest FSUIPC incremental update is 4.657. Version 4.651 was quite a few weeks ago.

But what was your problem? The install log is for 4.60a of course. And it shows it was completely successful.

What is the problem? So far you've mentioned none.

Regards

Pete

The same problem as crx0203:

I launched FSX and then have an error message, explaining that FSX has detected a problem with a third progamm FSUIPC and advicing not to execute this software. By forcing to launch FSUIPC, FSX launch take ages and crash at the end.

Regards

Henrique

January 25, 2011

Hello Pete,

I've tried to use the latest FSUIPC4 incremental update, 4.651, but it did not work. This is my FSUIPC4 install log

Installer for FSUIPC4.DLL version 4.60a

Looking in registry for FSX install path:
     HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft Games\Flight Simulator\10.0
     Parameter"SetupPath"
... &gt;&gt;&gt;  OK! FOUND FSX!  &lt;&lt;&lt; ...
Looking in registry for ESP install path:
     HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft ESP\1.0
     Parameter"SetupPath"
Not there, so looking in:
     HKEY_CURRENT_USER\SOFTWARE\Microsoft\Microsoft ESP\1.0
     Parameter"AppPath"
... NOT found! ...
===========================================================

INSTALLATION FOR FSX:
AppPath="C:\Programas\Microsoft Games\Microsoft Flight Simulator X\"
Checking version of FSX.EXE:
... Version 10.0.61637.0  (Need at least 10.0.60905.0)
Checking compatibility with installed SimConnect:
    Found SimConnect build 60905 (Original)
    Found SimConnect build 61242 (SP1 May07)
    Found SimConnect build 61259 (Acc/SP2 Oct07)
Checking if there's already a version of FSUIPC4 installed in:
       C:\Programas\Microsoft Games\Microsoft Flight Simulator X\Modules\FSUIPC4.DLL
... No previous valid version found.
FSX Modules folder already exists.
Okay -- installed FSUIPC4 into "C:\Programas\Microsoft Games\Microsoft Flight Simulator X\Modules\FSUIPC4.DLL"
Looking for the current user's Application Data path: 
... found as "C:\Documents and Settings\Henrique\Application Data"
Now finding \Microsoft\FSX\FSX.CFG for all users, including this one
Looking in "C:\Documents and Settings\Administrador\Application Data"
 ... No FSX.CFG there
Looking in "C:\Documents and Settings\All Users\Application Data"
 ... No FSX.CFG there
Looking in "C:\Documents and Settings\Default User\Application Data"
 ... No FSX.CFG there
Looking in "C:\Documents and Settings\Henrique\Application Data"
Found FSX.CFG in "C:\Documents and Settings\Henrique\Application Data\Microsoft\FSX\FSX.CFG"
Now checking DLL.XML ...
... There is a previous DLL.XML, checking for FSUIPC4 section.
... FSUIPC4 section already exists but will be replaced.
... FSUIPC4 section of DLL.XML written okay
Now checking for a SimConnect.XML file ...
... There is a SimConnect.XML, checking for "local" section.
... "local" section already exists, file not modified.
Looking in "C:\Documents and Settings\LocalService\Application Data"
 ... No FSX.CFG there
Looking in "C:\Documents and Settings\NetworkService\Application Data"
 ... No FSX.CFG there
"Modules\FSUIPC Documents" folder already exists.
Now installing additional files into the "Modules\FSUIPC Documents" folder:
   Installed "FSUIPC4 User Guide.pdf" okay
   Installed "FSUIPC4 for Advanced Users.pdf" okay
   Installed "FSUIPC4 History.pdf" okay
   Installed "List of FSX controls.pdf" okay
   Installed "GlobalSign Root.exe" okay
   Installed "FSUIPC Lua Library.pdf" okay
   Installed "FSUIPC Lua Plug-Ins.pdf" okay
   Installed "Lua License.pdf" okay
   Installed "Lua Plugins for VRInsight Devices.pdf" okay
   Installed "Example LUA plugins.zip" okay
FSUIPC4.DLL installed and signature checked out okay!
Deleted GlobalSign Root fix program ... no longer relevant
===========================================================

All installer tasks completed okay!
Registration check for FSUIPC4 and WideFS was successful! (result code 00)

*************** End of Install Log ***************

Can you please tell me what to do to have FSX running with FSUIPC.

Best Regards

Henrique

February 13, 2010

Hello Peter,

I have a computer network to run Project Magenta and of course I'm using WideFS on the clients. PM and WideFS are on the start up folder so they open automaticaly each time the computer powers on. Now in one of the clients I want to add to the start up folder FSX but I'm getting this error:

"Microsoft Filght Simulator is already running" but it is not. After closing the WideFS service FSX starts ok. What should I do to open FSX with WideFS running?

Please help

Regards

Henrique

July 19, 2009

Hello Peter,

I'm testing FSX with Project Magenta in a Vista computer and I'm getting problems with comunications. Very often the the PM ND stops (frezzes) and after some time it comes back and so on. FSX does not stop.

I post both the Wideserver and Wide client logs for you to see:

********* WideServer.DLL Log [version 7.520] *********
Blocksize guide = 4096 (double allowed)
Date (dmy): 19/07/09, Time 10:38:51.518: Server name is RADEON
    15351 Initialising TCP/IP server
    15351 Initialising IPX/SPX server
    15351 IPX/SPX socket() failed [Error=10047] Address family not supported by protocol family
    15351 Failed to start IPX/SPX Server
    15351 Initialising UDP/IP server
    16193 Broadcasting service every 1000 mSecs
   103975 Incoming connection Accepted ok (skt=3640) TCP
   104271 Connected to computer "MAGENTA" running WideClient version 6.780 (skt=3640) TCP
   812235 Close signalled to clients
   813327 Closing down now ...
Memory managed:  Offset records: 499 alloc, 498 free
Read buffer usage:  358 alloc, 358 free, max in session: 1
Write buffer usage: 7176 alloc, 7176 free, max in session: 1
Throughput maximum achieved:  25 frames/sec, 4660 bytes/sec
Throughput average achieved for complete session:  4 frames/sec, 952 bytes/sec
Average receive rate from "MAGENTA":  0 frames/sec, 21 bytes/sec
********* Log file closed *********

Wideclient

********* WideClient Log [version 6.78] Class=FS98MAIN *********
Date (dmy): 19/07/09, Time 10:41:01.421: Client name is MAGENTA
      265 Attempting to connect now
      312 Trying TCP/IP host "RADEON" port 8002 ...
      312Okay, IP Address = 192.168.1.103
      328 Connection made okay!
     4625 New Client Application: "pfd" (Id=224)
   703125 Received shutdown offset code = ADBC
   703125 FS closing down (param=ADBC), disconnecting

   703125 ********* Interim performance summary *********
   703125 Total time connected so far = 703 seconds
   703125 Reception maximum so far:  25 frames/sec, 4676 bytes/sec
   703125 Reception average whilst connected so far:  10 frames/sec, 2200 bytes/sec
   703125 Transmission maximum so far:  2 frames/sec, 776 bytes/sec
   703125 Transmission average whilst connected so far:  0 frames/sec, 21 bytes/sec
   703125 Max receive buffer = 717, Max send depth = 2, Send frames lost = 0

   703125 **************** Individual client application activity ****************
   703125 Client 224 requests: 8063 (Ave 11/sec), Data: 29238159 bytes (41590/sec), Average 3626 bytes/Process
   703125 ***********************************************
   703234 Received shutdown offset code = ADBC
   709718 Connection closed by server!
   709718 Attempting to connect now
   709734 Trying TCP/IP host "RADEON" port 8002 ...
   709734Okay, IP Address = 192.168.1.103
   730687 Error on client pre-Connection Select() [Error=10060] Connection timed out
   730687 Ready to try connection again
   731703 Attempting to connect now
   775703 Trying TCP/IP host "RADEON" port 8002 ...
   775703Okay, IP Address = 192.168.1.103
   841953 Trying TCP/IP host "RADEON" port 8002 ...
   841953Okay, IP Address = 192.168.1.103
   908453 Trying TCP/IP host "RADEON" port 8002 ...
   908453Okay, IP Address = 192.168.1.103

Can you please help me?

Regards

Henrique

February 23, 2008

Tanks Pete!

Working now!

Regards

Abrupto

February 22, 2008

Hi Pete!

I’m using FSCONV to bridge LEVELD SDK to FSUIPC. I’m getting a problem with a rotary button I want to have for DH may be because I’m a newbie :wink:

In Buttons + Switches tab, after detecting the joystick I configure this way:

- send to FS Control

- control sent – Offset Byte Set

- offset – x8B56

- parameter – x01

Configuring like this the numbers on the DH are always changing until they reach 0. What am I doing wrong?

Could you please help?

Regards

Abrupto

This is the information regarding DH in the FSCONV user’s manual:

7.1 Captains DH Commands

The maximum sample rate for this offset is 6.

O S T

56 2 VL Set Captains DH value in feet (range -20 .. 990)

At each sample FSCONV will check the captains DH value in the panel and generate Level-D

SDK + or – DH value commands if the value in this offset is different from the value in the

panel.

Recommendation: use the value in this offset for your hardware display as well, the

Level-D panel will follow…

Sign In

Abrupto

Posts

Joined

Last visited

Content Type

Profiles

Forums

Events

Gallery

Downloads

Posts posted by Abrupto

FSUIPC not accepted by FSX

FSUIPC not accepted by FSX

WideFS PM and FSX

WideClient/server and Vista

Offset Configuration

Offset Configuration

Browse

Activity

Important Information