sanleg
-
Posts
8 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Downloads
Posts posted by sanleg
-
-
I need to know what i have to write in flightillusion.txt to have work the bleed psi dual needle gauge.
Any help?
Thanks
Santiago
-
I have two more problems:
1- The cabin altitude gauge does not show what pmsystems show.... When i set the aircraft in 2000 for ex. The large needle in pmsystems is showing 1 and the gauge 7. Do you have any idea why?
2- the duct press gauge do not move... its correctly connected and installed.
Thanks
Santiago
-
Yes, i have downloaded the 99b version and works perfect!! THANKS A LOT.....
Now i am goeing to test them with pmsystems!!
Other question? How we goeing with my other order?? (Standby Instruments package with CIM) Please dont forget The LCV
Thanks
Santiago
-
Mark, i have really good news.... I make the gauges work.... the thing is:
I installed pmsystems built 84, and it works perfect!! The thing is that with built 98 (the last) gauges do not work,,, i dont know why.... Now i am goeing to try with built 96 and i tell you later....
Please check with project magenta this that i am telling you...
Thanks
Santiago
-
Hi!, i have only one interface, the one that it cames with the overhead blunde, and the only gauges that i have are the overheads. I have to have two interfances????
Thanks
Santiago
-
Hi simbuff, i did what you told me,,,, y check the com port and its correct, its the same i use with control program, and then i change the full scan value to 1 (one), and nothing, they dont work.
The com port is correct because project magenta detects the gauges, i can see them in flight illusion menu into pm systems menu.
When i put the full scan value in one, pm systems take like 2 miinutes to start because they check between 1 and 255.
I hope you can help me!
Thanks!
Santiago
-
HI, my name is Santiago Legnani, i have the overhead gauges but i can make them work with pmsystems.
The gauges are correctly conected, when i start the control program i can make the needles move and the light go on or off. I `d configure the pmsystems ini and the put the correct gauges port.
When i get into pmsystems menu, in flight illusion menu, i can see all the gauges correctly detected buy they dont move. I check my flightillusion.txt and they seems to be ok.
Here is my txt
//Flight Illusion Definitions
//[GaugeID], [Needle], [Variable], [Factor], [speed]
//
//Set Gauge ID using the Flight Illusion GSControl software
//
//Examples:
//180, 1, apuegt, 0.72, 4000
//181, 1, cabinclimb, 1, 1000
//182, 1, cabinalt, 1, 500
//182, 2, diffpress, max 1000, 500
//183, 1, bleedpsi1, max 80, 500
//183, 2, bleedpsi2, max 80, 500
//184, 1, fueltemp, 120, 4000
//185, 1, cabintemp, 0.66, 2000 //TODO
//186, 1, oxypress, 0.66, 2000 //TODO
//187, 1, flaps, 1, 2000
//
180, 1, apuegt, 0.72, 1600
181, 1, cabinclimb, 1, 1000
182, 2, cabinalt, 1, 500
182, 2, diffpress, 0.7, 500
184, 1, fueltemp, 120, 4500
185, 1, cabintemp, 0.66, 2000
186, 1, oxypress, 0.66, 2000
187, 1, flaps, 1, 2000
Can anyone help me please??
Thanks!!
Santiago
CAN'T CONNECT WIDE FS WITH FSX
in FSUIPC Support Pete Dowson Modules
Posted
I correctly installed the FSUIPC 4.12 on FSX and register. I configure the wideclient.ini correctly and when y try to connect, they seems to connect Ok buy a few seconds later they disconnect and reconect again. On the FSX bar, each time the wideclient reconects, they show a new conection, as if another PC conects FSX, and they show me 3, 4 ,5 connections.
Any ide why?
here are my files:
WIDECLIENT.INI
; PLEASE SEE WideFS documentation for parameter details
; =====================================================
[Config]
Port=8002
Port2=9002
Window=164,223,886,589
Visible=Yes
ServerName=santiagofs
Protocol=TCP
ButtonScanInterval=20
ClassInstance=0
NetworkTiming=5,1
MailslotTiming=2000,1000
PollInterval=2000
Port2=9002
ResponseTime=18
ApplicationDelay=0
TCPcoalesce=No
WaitForNewData=500
MaxSendQ=100
OnMaxSendQ=Log
NewSendScanTime=50
Priority=3,1,2
; -----------------------------------------------
[user]
Log=Errors+
; ===============================================
WIDECLIENT.LOG
********* WideClient Log [version 6.75] Class=FS98MAIN *********
Date (dmy): 19/06/07, Time 12:02:17.140: Client name is SEMPRON3
203 Attempting to connect now
219 Trying TCP/IP host "santiagofs" port 8002 ...
219Okay, IP Address = 192.168.1.107
219 Connection made okay!
36562 Timed out response: connection assumed lost!
36562 Ready to try connection again
36625 Timed out response: connection assumed lost!
37562 Attempting to connect now
37562 Connection made okay!
55750 Timed out response: connection assumed lost!
55750 Ready to try connection again
55812 Timed out response: connection assumed lost!
56750 Attempting to connect now
56750 Connection made okay!
63765 ****** End of session performance summary ******
63765 Total time connected = 63 seconds
63765 Reception maximum: 0 frames/sec, 0 bytes/sec
63765 Reception average whilst connected: 0 frames/sec, 0 bytes/sec
63765 Transmission maximum: 0 frames/sec, 108 bytes/sec
63765 Transmission average whilst connected: 0 frames/sec, 21 bytes/sec
63765 Max receive buffer = 0, Max send depth = 1, Send frames lost = 0
63765 ********* Log file closed (Buffers: MaxUsed 1, Alloc 30 Freed 30 Refused 0) *********
I ATTACHED A PHOTO OF THE FSX BAR WITH A CONECTION OF ONE PC. as yoy can see its like if there are 3 PC conected.
PLEASE ANY HELP