ansett727rma
-
Posts
8 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Downloads
Posts posted by ansett727rma
-
-
If I use the Axis Spoiler Set control with the parameter 11451, it shows up on the log that the button has changed, but it has not triggered an event!
-
I want to use a rotary switch to control spoilers.
The Down, Arm(with its limitations), and Up positions are straightforward.
I wish to have at least one intermediate, or flight detent setting available.
I can see that there is either a Axis Spoiler Set, or Spoilers Set offset that I could use, but I am unable to work out what value to put as a Parameter.
The flight detent position for the stock FSX B737-800 appears to be 11451 (FSUIPC log).
What parameter would I use for this position?
THANK YOU
-
Hi Pete,
thanks for your help. I think Ive got the lights sorted for now.
-
HI Pete,
sorry i didnt see the swiching off lines further down.
I am using the Stock FSX 737-800.
Am I using the correct parameters?
Could you please list all the parameters for all lights using this offset? THANK YOU
15=P1,10,Cx06000D0C,x0002 (Beacon)
16=P1,11,Cx06000D0C,x0001 (Nav)
17=P1,12,C66052,0 (Strobe)
18=P1,13,Cx06000D0C,x0008 (Taxi)
19=P1,14,Cx06000D0C,x0004 (Landing
34=U1,10,Cx0A000D0C,x0002
35=U1,11,Cx0A000D0C,x0001
36=U1,12,C66053,0
37=U1,13,Cx0A000D0C,x0008
38=U1,14,Cx0A000D0C,x0004
-
I Have been using setbit/clrbit to try and get lights working with spdt rocker switches. Below is the code from FSUIPC4.ini that I have been trying with these. The Bcn, Nav, strobe and landing lights work fine until the taxi light switch is
switched which causes the others to turn off. I dont understand why? Any help would be appreciated. THANK YOU
15=P1,10,Cx06000D0C,x0002 (Beacon)
16=P1,11,Cx06000D0C,x0001 (Nav)
17=P1,12,C66052,0 (Strobe)
18=P1,13,Cx06000D0C,x0008 (Taxi)
19=P1,14,Cx06000D0C,x0004 (Landing)
-
Can Offset 0D0C be written to directly using FSUIPC.ini ?
Can you give an example?
-
Hi,
I am trying to setup my light switches as toggle switches connected to LPT Switch, interfaced in PPJoy and programmed directly in FSUIPC. I have read in other posts on this forum that Offset 0D0C can be used with Setbit and Clrbit to select individual lights, allowing synchronisation with Initial FS startup settings.
Programming directly with FSUIPC however appears to use Controls such as 6**** to select an offset. In the lists I cannot see one of these 6**** codes which correspond to Offset 0D0C.
Can someone please give an example of how this can be done.
Thank You
:?: :?: :?: :?: :?: :?: :?:
Spoiler switch setup HELP
in FSUIPC Support Pete Dowson Modules
Posted
All logging details are selected.
Below are excerts from the log, and ini files
1259641 Button changed: bRef=0, Joy=2, Btn=0, Pressed
1259641 [buttons] 62=P2,0,C66065,0
1259641 FS Control Sent: Ctrl=66065, Param=0
1259641 Button changed: bRef=0, Joy=2, Btn=1, Released
1259641 *** EVENT: Cntrl= 66065 (0x00010211), Param= 0 (0x00000000) SPOILERS_OFF
1264984 Button changed: bRef=0, Joy=2, Btn=0, Released
1265172 Button changed: bRef=0, Joy=2, Btn=1, Pressed
1265172 [buttons] 64=P2,1,C66066,0
1265172 FS Control Sent: Ctrl=66066, Param=0
1265172 *** EVENT: Cntrl= 66066 (0x00010212), Param= 0 (0x00000000) SPOILERS_ARM_ON
1268219 Button changed: bRef=0, Joy=2, Btn=1, Released
1268297 Button changed: bRef=0, Joy=2, Btn=2, Pressed
1268297 [buttons] 63=P2,2,C66382,11451
1268297 FS Control Sent: Ctrl=66382, Param=11451
1275375 Button changed: bRef=0, Joy=2, Btn=2, Released
1275375 Button changed: bRef=0, Joy=2, Btn=3, Pressed
1275375 [buttons] 67=P2,3,C66064,0
1275375 FS Control Sent: Ctrl=66064, Param=0
1275375 *** EVENT: Cntrl= 66064 (0x00010210), Param= 0 (0x00000000) SPOILERS_ON
62=P2,0,C66065,0 [spoilers Off]
63=P2,2,C66382,11451 [Axis Spoiler Set]
64=P2,1,C66066,0 [spoilers Arm - On]
67=P2,3,C66064,0 [spoilers On]