[no connection WideFS and Wideserver]

Hi Pete,

 

can you tell me where can I find the SimConnect.xml?

 

Here are the logfiles:

1. wideclientlog

********* WideClient Log [version 6.999b] Class=FS98MAIN *********
Date (dmy): 10/03/14, Time 17:59:07.474: Client name is FLIGHTSIM-PC
       94 LUA: "D:\Downloads\Initial.LUA": not found
      110 Attempting to connect now
      110 Trying to locate server: Need details from Server Broadcast
      110 Failed to connect: waiting to try again
     2110 Attempting to connect now
     4922 New Client Application: "Prosim737" (Id=3664)
    24110 Server = ERAZERSIM
    24110 Trying TCP/IP host "ERAZERSIM" port 8002 ...
    24110 ... Okay, IP Address = 192.168.0.140
    45125 Error on client pre-Connection Select() [Error=10060] Connection timed out
    45125 Ready to try connection again
    47172 Attempting to connect now
    47172 Giving up server, looking for another!
    47172 Server = ERAZERSIM
    47172 Trying TCP/IP host "ERAZERSIM" port 8002 ...
    47172 ... Okay, IP Address = 192.168.0.140
    70235 Server = ERAZERSIM
    70235 Trying TCP/IP host "ERAZERSIM" port 8002 ...
    70235 ... Okay, IP Address = 192.168.0.140
    93235 Giving up server, looking for another!
    93235 Server = ERAZERSIM
    93235 Trying TCP/IP host "ERAZERSIM" port 8002 ...
    93235 ... Okay, IP Address = 192.168.0.140
   116235 Server = ERAZERSIM
   116235 Trying TCP/IP host "ERAZERSIM" port 8002 ...
   116235 ... Okay, IP Address = 192.168.0.140
   139235 Giving up server, looking for another!
   139235 Server = ERAZERSIM
   139235 Trying TCP/IP host "ERAZERSIM" port 8002 ...
   139235 ... Okay, IP Address = 192.168.0.140
   162297 Server = ERAZERSIM
   162297 Trying TCP/IP host "ERAZERSIM" port 8002 ...
   162297 ... Okay, IP Address = 192.168.0.140
   185297 Giving up server, looking for another!
   185297 Server = ERAZERSIM
   185297 Trying TCP/IP host "ERAZERSIM" port 8002 ...
   185297 ... Okay, IP Address = 192.168.0.140
   208297 Server = ERAZERSIM
   208297 Trying TCP/IP host "ERAZERSIM" port 8002 ...
   208297 ... Okay, IP Address = 192.168.0.140
   231360 Giving up server, looking for another!
   231360 Server = ERAZERSIM
   231360 Trying TCP/IP host "ERAZERSIM" port 8002 ...
   231360 ... Okay, IP Address = 192.168.0.140
   254422 Server = ERAZERSIM
   254422 Trying TCP/IP host "ERAZERSIM" port 8002 ...
   254422 ... Okay, IP Address = 192.168.0.140
   254422 Connection made okay!
   291219 Received shutdown offset code = ADBC
   291219 FS closing down (param=ADBC), disconnecting

   291219 ********* Interim performance summary *********
   291219 Total time connected so far = 35 seconds
   291219 Reception maximum so far:  29 frames/sec, 4178 bytes/sec
   291219 Reception average whilst connected so far:  27 frames/sec, 3067 bytes/sec
   291219 Transmission maximum so far:  13 frames/sec, 2500 bytes/sec
   291219 Transmission average whilst connected so far:  11 frames/sec, 1758 bytes/sec
   291219 Max receive buffer = 731, Max send depth = 6, Send frames lost = 0

   291219 **************** Individual client application activity ****************
   291219 Client 3664 requests: 982 (Ave 28/sec), Data: 1134193 bytes (32405/sec), Average 1154 bytes/Process
   291219 ***********************************************
   291344 Received shutdown offset code = ADBC
   298875 Connection closed by server!
   298875 Attempting to connect now
   298875 Server = ERAZERSIM
   298875 Trying TCP/IP host "ERAZERSIM" port 8002 ...
   298875 ... Okay, IP Address = 192.168.0.140
   321922 Giving up server, looking for another!

 

2 wideserver fsx

********* WideServer.DLL Log [version 7.929] *********
Blocksize guide = 8192 (double allowed)
Date (dmy): 10/03/14, Time 17:59:58.866: Server name is ERAZERSIM
    15094 Initialising TCP/IP server
    15094 Initialising UDP/IP server
    16016 Broadcasting service every 1000 mSecs
   119625 Closing down now ...
Memory managed:  Offset records: 61 alloc, 60 free
Read buffer usage:  0 alloc, 0 free, max in session: 0
Write buffer usage: 0 alloc, 0 free, max in session: 0
Throughput maximum achieved:  0 frames/sec, 0 bytes/sec
Throughput average achieved for complete session:  0 frames/sec, 0 bytes/sec
********* Log file closed *********

3. wideserver prepar3d

 

********* WideServer.DLL Log [version 7.929] *********
Blocksize guide = 8192 (double allowed)
Date (dmy): 10/03/14, Time 18:03:41.398: Server name is ERAZERSIM
    15329 Initialising TCP/IP server
    15329 Initialising UDP/IP server
    16032 Broadcasting service every 1000 mSecs
    26750 Incoming connection Accepted ok (skt=11600) TCP
    26813 Connected to computer "FLIGHTSIM-PC" running WideClient version 6.999 (skt=11600) TCP
    63547 Auto send stopped before sending all data (0 of 47 sent), Error=10013 (IP=255.255.255.255) UDP
    70094 Close signalled to clients
    71188 Closing down now ...
Memory managed:  Offset records: 228 alloc, 227 free
Read buffer usage:  275 alloc, 275 free, max in session: 1
Write buffer usage: 1932 alloc, 1932 free, max in session: 1
Throughput maximum achieved:  30 frames/sec, 4143 bytes/sec
Throughput average achieved for complete session:  6 frames/sec, 741 bytes/sec
Average receive rate from "FLIGHTSIM-PC":  6 frames/sec, 1221 bytes/sec
********* Log file closed *********

 

The clientlog stayed running from the moment I have started fsx, closing fsx, starting prepar3d until closing prepar3d
 

Pete I also have tried starting fsx with firewalls disabled with the same result.

I thought that the Estonia migration tool could possibly cause the problem is that is something I also recently installed.

 

Tomorrow I will give it a try with other port numbers.

 

With kind regards,

 

Simon

[no connection WideFS and Wideserver]

Hello Pete,

 

thank you for your quick reaction.

 

The Windows error occurs after starting FSX and after the moment I see the message "waiting for clients" and not after connection as I wrote.

 

I've tried to copy/paste the logs into this page, but I can't. Maybe I can send them by e-mail?

 

How and where can I see if there is a conflict with SimConnect?

It looks like something is blocking the connection.

I have installed the migration tool for Prepar3d to install  FSX add-ons into Prepar3D.

Could it be, that this package could block the connection?

 

With kind regards,

 

Simon

[no connection WideFS and Wideserver]

Hello,

 

I have a problem with the connection between WideFS and Wideserver when running FSX.

This situation started after the update with the current installed version of FSUIPC(7.929).

I have on one PC ( WIN8.1) installed FSX and Prepar3D 2.1.

On the other PC ( WIN7) installed WideFS.

When I start FSX there is no connection and FSX is "waiting for clients" and WIDEFS is "waiting for connection".

No matter how long I wait, but there is no connection.

After that I close FSX and I start Prepar3d. Almost immidiatly there is a connection between WideFS and Wideserver.

 

I have attached the logs of FSX Wideserver, Prepar3d Wideserver and WideFS log.

 

In the log I have seen, that there is an error message after connecting to FSX. (10060)

 

I have tried several things to solve the problem:

 

rebuild widefs ini, rebuild fsx cfg, new default flight in fsx, reinstallation of fsx,  but no change at all!!!

 

Hopefully you can help me, because now I'm unable to fly with fsx and Prosim.

 

If you need more information, please let me know.

Regards,

 

Simon

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

[add-on 4.5.3.3]

Pete,

thanks for your nightly intervention.

I have installed version 4.5.3.4 and FSUIPC works fine as before.

The problem I have mentioned regarding the delay, when switching the autopilot function to manual controls, when fully established on the ILS, has been solved in the above mentioned version. (3. Fixed a strange bug which could result in a 5 second delay in re-connecting controls when they've been explicitly disconnected via the applcation facilities in offset 310A.)

Pete, thanks for your excellent support and solving an important issue.

Simon Vreeke

[add-on 4.5.3.3]

Pete,

I have a problem with installing version 4.5.3.3

After contacting Sim-Avionics with a problem with a delay in manual controlling after disengaging the autopilot, Mark told me to download the latest version of FSUIPC.

I installed version 4.53 and the porblems were the same as before.

I have downloaded the version 4.5.3.3,. After unzipping and moving the dll to the FSX Modules folder, I started FSX to try again.

In the add-on in FSX I could not see FSUIPC and the application was not active, due to the fact that my external controls didn't work and also SIM-Avionics was not connected to FSX.

Could you help me to solve this.

Thanks in advance.