[no answer to email]

Hi.

I am very upset at this point can anyone tell me why when I ask for support thru extream pc I get no response this was a real good application and support was great to is it me or did something happen that I dont know about . I have sent three to four requests to have my config repaired because of a multiple gpu entry issue but there has been no responce what gives?

\I had the thing working great then my nvidia driver automatically updated and now I get two or three Gpu entries in my FSX config file that should not happen when there is only one gpu in the system. That is a bug with this program that just should not happen in my opinion. Maybe I am wrong in what I say but it seems strange that this program seem to think there is more than one gpu in your system when there isn,t What is it that I am missing Here,

Please forgive the harshness but I am not the type to pay for things and not get what it is that I was expecting. You say send it I do And then nothing . Did you mail provider get spammed again. Well whatever the issue is all would be forgive if I can get this running so i can get back in the air T^hanks for hte help in advance and again I do appolgize for the way that this sounds.

fly123

[FS Commander 8,6 data base manager problems]

Hi Dave,

following answer to your e-mail is sent by e-mail to yourself.

NOT ONLY COPY or PASTE, YOU MUST RUN THIS PROGRAM ( FSCFSXCFG.EXE )

SO THAT THIS PROGRAM CAN DO THE JOB FOR YOU.

So it is still described in the manual

If you are familiar with copying files, you can copy the file manually as

described above. However, we have added a little Scenery Library Network Tool

(FSCFSXCFG.exe) which performs the copying process for you.

Note that this program MUST be placed in your FS X folder and must be

started from there. Simply press the OK button. You will be instructed when the copying process

has been successfully completed.

Regards,

Volker

Thanks very much Volker I was not executeing the file from the right location. Thanks for the help.

but now I get an error message when I try to connect to gps says can not connect with flight sim message number 14.

I have not even begun to look at anythin fixing to update fsuipc and widefs 7.

[FS Commander 8,6 data base manager problems]

Hi Anonymous,

Support for version 8.6 expired in 2010.

If you read the manual page 13 and 14, then you will read on page 14, the program Scenery Library Network Tool (FSCFSXCFG.exe), which is delivered with the installation, is the solution for your problem.

On page 13 and on Chapter Appendix Network is a detailed description how to use the FSC in a network.

Regards,

Volker Heine

btw. e-mail is on the way

Hi, Thisn is Dave

I have set ba reply to you indicationg that after following the directions to the letter I am still not able to get past the scenery.cfg build for FSC.

i am just totally lost here I when thought all my files and security levels to read and write but I still get the same result. What can I do to get this thing running I am almost at the point of temperarily install fsx on this pc again just to get these files set up. I am wondering if I set up a user file for Tower and give exclusive permission to the user if that would work or should I consider setting this up on work network insead of a homegroup network. Just not getting this write has got me going nuts havent flown in over a week because I like flight sim to be set up the way I want it before I do anything I would would be very thanful If you could get me pointed in the right direction. Thank you.

[FS Commander 8,6 data base manager problems]

Email meI have a problem with installing FS Commander on a network. I have taken a snap shot to show what I see when trying to run Database Manager

If anyone could please help me with this I would be very thankful. please accept my apologies I am very new at this posting of error stuff any help at all woul be welcomed greatly.

As the screen shots show I see the file for flightsim just fine and a little more info this is a fresh install of FSX with no add ons so I am not sure what is happening. The highlighted area at the end state Please copy from your wnidows system drive the scenery.cfg and copy to scenerycfg.fsc and place in yout FSX path I am now stuck and do not know were to go from here. Thank you all in advance.

This is on a windows 7 service pack 1 system for both my main pc and this one. FSX is on main PC.Please just feel free to email any solutions for I will be on the road and will only have access to that thank yo again.

database error for fsc.zip

[PROBLEM WITH FSM]

I recently purchased flight sim manager installed and downloaded all updates but i am not able to bring up any airport information. I am not running on a network FSM is on same pc as FSX

I have tried getting help from fsps support but all I get is foreign pictures of screen shots sent back and I can only read english. This i felt was not very professional for a producer of a product not to give accurate and complete support for a product they charge so much for. Any other program I have had a problem with in the past I could go directly to their page for assistance not this time I feel as if they have taken my money and run. Is there anyone out there who can assist me with this situation.

I have done all the normal; things you would do

uninstalled both FSX and FSM

created a whole new account on my pc

reinstalled everything without any add on and i am getting no airport info

and it seems to consistantly flicker on my screen. I am at a complete lose as to where I can turn from here.

I'm running windows 7

4 processors

prossecor speed of 2593 MHz

memory 8 GB

ati graphics card HD 5750 with 1 GB on board ddr5

I just dont see where the problem is my refresh rate in fsx is set to 20 fps

standard speeds for fsm clocks

what else can i look into to fix this I have minimized my ai aircraft, scenary to very sparse, and land graphics to minimum.

I have the lastest version nof FSUIPC 4 and WIDE7 but I still get the same problem what else is there

please help

thank you

frustrated in new york :?:

[New Update]

iI just down loaded and installed the new update hopeing that i would repair flight simulator manager before I pull my hair out but to no avail

I still the same problem i have had from the beginning I can't seem to get any of my airport info to appear and yes i have reinitialized the program several times uninstalled reinstall both fsx and fsm and still have the same problem I have even created a new usre account on my system after uninstalling eveything and tried it all fresh I am still have the same problem I have tried all this to get this program to work as is should per the protocals in the installation of the program. i am still trying to figure out how to get a snap shot of my system at the time of this happening nin order that it might help but as i have said before i am very new to flight sim and this computer will mkeep trying but could use some help anything as long as is isnot stupid will help i just am lost right now please help!!!!!!!!!!!!!!!!!! :?: