Whisper
-
Posts
7 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Downloads
Posts posted by Whisper
-
-
I did dxdiag, buth no problems are detekted (see attachement).
My PC works properly, even with FS2004 + TEX + G-Plan (remote on a second PC) + RadarContakt, everithing is OK (FPS between 15 and 25 (with not to heavy scenery / aircraft); only simming after starting FSPS (FS2004 alone) i have the blue screen as mensioned above.
Also i have no better FPS in the 5 minuts that the program works !?
-
Because blue screen comes with words that is not possible to read. That means memory or gpu overtemp.
I am trying to give you a little more power to your fs and some of the above can not handle it.
For memory test use the bellow link
http://pcsupport.about.com/od/toolsofthrytest.htm
For gpu, you have to search from your vendor.
Regards,
FSPS Team
OK now, it's some time ago that I made some tests.... but no results.
After some time (5 minuts) I always geth blue screen with following detailed message
STOP Error 0x000000D1: DRIVER_IRQL_NOT_LESS_OR_EQUAL
0x000000D1 (xx00000000, 0x00000002, 0x00000000, 0xBA0C29E7)
cmuda.sys - Address BA0C29E7 base at BA051000, DateStamp 426345eb
On Google I find : STOP error 0xD1 means that a kernel-mode driver attempted to access pageable memory at a process IRQL that was too high. STOP code 0x000000D1 may also display "DRIVER_IRQL_NOT_LESS_OR_EQUAL" on the same STOP message.
Sollution ? :
Open a command prompt (START>RUN>CMD) and type sfc /scanonce
then reboot. If the file is corrupted then this will fix it.
--> no result
On a other site I found that there could be a problem with writing on the audio driver (cmuda.sys); is it possible that your program writes on a wrong place ?
-
I just buy a WideFS registration by simMarket (ORDER Number: 657766)
To late I read that the e-mail must be the same as the FSUIPC registration (ORDER Number: 379452 - Order Date:Thursday 01 November, 2007)
Is it possible to geth a other registration with the same e-mail as the FSUIPC order ?
(the "11" must be a "1" in the e-mail adres)
-
Why do you think so ? How can I fix this problem ?
-
I bought the normal version (1.2.0.0)
Processor: Intel® Pentium® 4 CPU 3.00GHz (2 CPUs)
------------------
System Information
------------------
Time of this report: 7/2/2010, 12:29:33
Machine name: MEDION
Operating System: Windows XP Home Edition (5.1, Build 2600) Service Pack 3 (2600.xpsp_sp3_gdr.100216-1514)
Language: Dutch (Regional Setting: Dutch)
System Manufacturer: MEDIONPC
System Model: MS-7012
BIOS: Phoenix - AwardBIOS v6.00PG
Processor: Intel® Pentium® 4 CPU 3.00GHz (2 CPUs)
Memory: 2048MB RAM
Page File: 521MB used, 2144MB available
Windows Dir: C:\WINDOWS
DirectX Version: DirectX 9.0c (4.09.0000.0904)
DX Setup Parameters: Not found
DxDiag Version: 5.03.2600.5512 32bit Unicode
------------
DxDiag Notes
------------
DirectX Files Tab: No problems found.
Display Tab 1: No problems found.
Sound Tab 1: No problems found.
Music Tab: No problems found.
Input Tab: No problems found.
Network Tab: No problems found.
--------------------
DirectX Debug Levels
--------------------
Direct3D: 0/4 (n/a)
DirectDraw: 0/4 (retail)
DirectInput: 0/5 (n/a)
DirectMusic: 0/5 (n/a)
DirectPlay: 0/9 (retail)
DirectSound: 0/5 (retail)
DirectShow: 0/6 (retail)
-
Dear Support team,
I bought the FSPS Multicore programme form Simmarket.com,but I can't manage to make it work on Windows XP.
I installed the program as mensioned in the manual
- Net 3.5 SP1 installed
- I run the application as Administrator user.
I can start FS9 in core 2 (no decent of framerates !), but after som minutes the PC crashes with a blue screen !!
What is wrong here ?
FSPS - MULTICORE ENVIRONMENT / Blue screen
in FSPS Support Forum (LEGACY)
Posted
This is wath i can find about the type of the processor
Processor: Intel® Pentium® 4 CPU 3.00GHz (2 CPUs)
Processor x86 Family 15 Model 2 Stepping 9 GenuineIntel ~2992 Mhz
so i think it is not a HT cpu (there is a mention of 2 CPUs).
Can you tell me where i can find the exact info ?