Jump to content
The simFlight Network Forums

varadero129

Members
 View Profile  See their activity

  • Posts

    36

  • Joined

  • Last visited

 Content Type 

Posts posted by varadero129

  2. Can an axis change its function depending on a button state?

    in FSUIPC Support Pete Dowson Modules

    Posted

    I haven't found my config files, so just follow Pete's instructions and it will work. I had a Saitek pro flight yoke system with throttle quadrant, and I used the 2 left lever for engine 1 and engine 2 and the 3rd lever was used with this method, sometimes, depending on another button's state it was flaps, sometimes it was spoiler arm, and maybe gear lever, I'm not sure.

  3. Can an axis change its function depending on a button state?

    in FSUIPC Support Pete Dowson Modules

    Posted

    24 minutes ago, fuzevt said:

    Pete or Tamas,

    I have attached my FSUIPC.ini file and the method described appears to be the solution to my predicament but I am not sure how to add the lines you mentioned below. Is it added as is ___ in other word what is "b". My apologies this question come as elementary, I am a complete newbee at this:

     

    FSUIPC4.ini

    Hi fuzevt,

    I stopped doing flight sim a few years ago, instead I fly IRL. I don't remember how I achieved this but Pete's description helped a lot. I try ro find my old FSX parameter files maybe I can help you but can you clarify your question? I don't really understand what you need.

  4. Trim unintentionally goes up

    in FSUIPC Support Pete Dowson Modules

    Posted

     

    Hi Pete,

     

    I have a Flight One Cessna 441 Conquest II in FSX. At the before takeoff checklist I found that the trim is not set to takeoff, but it is set to full nose up position. I tried to fix this setting by pushing the trim to takeoff position, but I found that after I finish setting the trim (I have repeating enabled for this control, joystick button 1,2 like this in FSUIPC4.ini: 12=R1,2,C65607,0) the trim wheel just starts to go down, this way trimming the aircraft nose up. I tested to push joystick button 1,3, which is for the trim down (nose up), and it goes double the rate as is goes accidentally when I just simply release any trim control, and it goes down (nose up) by itself.

     

    Can you please help me locate where I am mistaken?

     

    Here is a little logging, and here is my FSUIPC4.ini (the log file doesn't say anything about somebody or something manipulating my joystick button 1,3 or trim down (nose up))

     

    ********* FSUIPC4, Version 4.923 by Pete Dowson *********
    User Name="Bagó Tamás"
    User Addr="bago.tamas@gmail.com"
    FSUIPC4 Key is provided
    WIDEFS7 not user registered, or expired
      4304629 System time = 26/12/2013 00:27:48, Simulator time = 12:39:34 (11:39Z)
    [Continuation log requested by user]
    Running inside FSX on Windows 7
    Module base=52F20000
      4304629 LogOptions changed, now 40000000 00000001
      4338091 Button changed: bRef=0, Joy=1, Btn=2, Pressed
      4338091 [buttons] 12=R1,2,C65607,0
      4338091 Repeating flag set: bRef=0, Joy=1, Btn=2 (RepeatDelayCtr=1)
      4338091 FS Control Sent: Ctrl=65607, Param=0
      4338263 Button held, flags=X05, repeat set: bRef=0, Joy=1, Btn=2, (RepeatOk sets 2)
      4338263 [buttons] 12=R1,2,C65607,0
      4338263 Repeating flag set: bRef=0, Joy=1, Btn=2 (RepeatDelayCtr=11)
      4338263 FS Control Sent: Ctrl=65607, Param=0
      4338263 Button held, flags=X05, repeat set: bRef=0, Joy=1, Btn=2, (Result 4)
      4338263 [buttons] 12=R1,2,C65607,0
      4338294 Button held, flags=X05, repeat set: bRef=0, Joy=1, Btn=2, (RepeatOk sets 2)
      4338294 [buttons] 12=R1,2,C65607,0
      4338294 Repeating flag set: bRef=0, Joy=1, Btn=2 (RepeatDelayCtr=11)
      4338294 FS Control Sent: Ctrl=65607, Param=0
      4338325 Button held, flags=X05, repeat set: bRef=0, Joy=1, Btn=2, (RepeatOk sets 2)
      4338325 [buttons] 12=R1,2,C65607,0
      4338325 Repeating flag set: bRef=0, Joy=1, Btn=2 (RepeatDelayCtr=11)
      4338325 FS Control Sent: Ctrl=65607, Param=0
      4338356 Button held, flags=X05, repeat set: bRef=0, Joy=1, Btn=2, (RepeatOk sets 2)
      4338356 [buttons] 12=R1,2,C65607,0
      4338356 Repeating flag set: bRef=0, Joy=1, Btn=2 (RepeatDelayCtr=11)
      4338356 FS Control Sent: Ctrl=65607, Param=0
      4338356 Button held, flags=X05, repeat set: bRef=0, Joy=1, Btn=2, (Result 4)
      4338356 [buttons] 12=R1,2,C65607,0
      4338388 Button held, flags=X05, repeat set: bRef=0, Joy=1, Btn=2, (RepeatOk sets 2)
      4338388 [buttons] 12=R1,2,C65607,0
      4338388 Repeating flag set: bRef=0, Joy=1, Btn=2 (RepeatDelayCtr=11)
      4338388 FS Control Sent: Ctrl=65607, Param=0
      4338434 Button held, flags=X05, repeat set: bRef=0, Joy=1, Btn=2, (RepeatOk sets 2)
      4338434 [buttons] 12=R1,2,C65607,0
      4338434 Repeating flag set: bRef=0, Joy=1, Btn=2 (RepeatDelayCtr=11)
      4338434 FS Control Sent: Ctrl=65607, Param=0
      4338434 Button held, flags=X05, repeat set: bRef=0, Joy=1, Btn=2, (Result 4)
      4338434 [buttons] 12=R1,2,C65607,0
      4338466 Button held, flags=X05, repeat set: bRef=0, Joy=1, Btn=2, (RepeatOk sets 2)
      4338466 [buttons] 12=R1,2,C65607,0
      4338466 Repeating flag set: bRef=0, Joy=1, Btn=2 (RepeatDelayCtr=11)
      4338466 FS Control Sent: Ctrl=65607, Param=0
      4338497 Button held, flags=X05, repeat set: bRef=0, Joy=1, Btn=2, (RepeatOk sets 2)
      4338497 [buttons] 12=R1,2,C65607,0
      4338497 Repeating flag set: bRef=0, Joy=1, Btn=2 (RepeatDelayCtr=11)
      4338497 FS Control Sent: Ctrl=65607, Param=0
      4338528 Button held, flags=X05, repeat set: bRef=0, Joy=1, Btn=2, (RepeatOk sets 2)
      4338528 [buttons] 12=R1,2,C65607,0
      4338528 Repeating flag set: bRef=0, Joy=1, Btn=2 (RepeatDelayCtr=11)
      4338528 FS Control Sent: Ctrl=65607, Param=0
      4338528 Button held, flags=X05, repeat set: bRef=0, Joy=1, Btn=2, (Result 4)
      4338528 [buttons] 12=R1,2,C65607,0
      4338575 Button held, flags=X05, repeat set: bRef=0, Joy=1, Btn=2, (RepeatOk sets 2)
      4338575 [buttons] 12=R1,2,C65607,0
      4338575 Repeating flag set: bRef=0, Joy=1, Btn=2 (RepeatDelayCtr=11)
      4338575 FS Control Sent: Ctrl=65607, Param=0
      4338606 Button held, flags=X05, repeat set: bRef=0, Joy=1, Btn=2, (RepeatOk sets 2)
      4338606 [buttons] 12=R1,2,C65607,0
      4338606 Repeating flag set: bRef=0, Joy=1, Btn=2 (RepeatDelayCtr=11)
      4338606 FS Control Sent: Ctrl=65607, Param=0
      4338637 Button held, flags=X05, repeat set: bRef=0, Joy=1, Btn=2, (RepeatOk sets 2)
      4338637 [buttons] 12=R1,2,C65607,0
      4338637 Repeating flag set: bRef=0, Joy=1, Btn=2 (RepeatDelayCtr=11)
      4338637 FS Control Sent: Ctrl=65607, Param=0
      4338637 Button held, flags=X05, repeat set: bRef=0, Joy=1, Btn=2, (Result 4)
      4338637 [buttons] 12=R1,2,C65607,0
      4338668 Button held, flags=X05, repeat set: bRef=0, Joy=1, Btn=2, (RepeatOk sets 2)
      4338668 [buttons] 12=R1,2,C65607,0
      4338668 Repeating flag set: bRef=0, Joy=1, Btn=2 (RepeatDelayCtr=11)
      4338668 FS Control Sent: Ctrl=65607, Param=0
      4338700 Button held, flags=X05, repeat set: bRef=0, Joy=1, Btn=2, (RepeatOk sets 2)
      4338700 [buttons] 12=R1,2,C65607,0
      4338700 Repeating flag set: bRef=0, Joy=1, Btn=2 (RepeatDelayCtr=11)
      4338700 FS Control Sent: Ctrl=65607, Param=0
      4338746 Button held, flags=X05, repeat set: bRef=0, Joy=1, Btn=2, (RepeatOk sets 2)
      4338746 [buttons] 12=R1,2,C65607,0
      4338746 Repeating flag set: bRef=0, Joy=1, Btn=2 (RepeatDelayCtr=11)
      4338746 FS Control Sent: Ctrl=65607, Param=0
      4338746 Button held, flags=X05, repeat set: bRef=0, Joy=1, Btn=2, (Result 4)
      4338746 [buttons] 12=R1,2,C65607,0
      4338778 Button held, flags=X05, repeat set: bRef=0, Joy=1, Btn=2, (RepeatOk sets 2)
      4338778 [buttons] 12=R1,2,C65607,0
      4338778 Repeating flag set: bRef=0, Joy=1, Btn=2 (RepeatDelayCtr=11)
      4338778 FS Control Sent: Ctrl=65607, Param=0
      4338809 Button held, flags=X05, repeat set: bRef=0, Joy=1, Btn=2, (RepeatOk sets 2)
      4338809 [buttons] 12=R1,2,C65607,0
      4338809 Repeating flag set: bRef=0, Joy=1, Btn=2 (RepeatDelayCtr=11)
      4338809 FS Control Sent: Ctrl=65607, Param=0
      4338809 Button held, flags=X05, repeat set: bRef=0, Joy=1, Btn=2, (Result 4)
      4338809 [buttons] 12=R1,2,C65607,0
      4338840 Button held, flags=X05, repeat set: bRef=0, Joy=1, Btn=2, (RepeatOk sets 2)
      4338840 [buttons] 12=R1,2,C65607,0
      4338840 Repeating flag set: bRef=0, Joy=1, Btn=2 (RepeatDelayCtr=11)
      4338840 FS Control Sent: Ctrl=65607, Param=0
      4338871 Button changed: bRef=0, Joy=1, Btn=2, Released
      4342724 Button changed: bRef=0, Joy=1, Btn=2, Pressed
      4342724 [buttons] 12=R1,2,C65607,0
      4342724 Repeating flag set: bRef=0, Joy=1, Btn=2 (RepeatDelayCtr=1)
      4342724 FS Control Sent: Ctrl=65607, Param=0
      4342865 Button held, flags=X05, repeat set: bRef=0, Joy=1, Btn=2, (RepeatOk sets 2)
      4342865 [buttons] 12=R1,2,C65607,0
      4342865 Repeating flag set: bRef=0, Joy=1, Btn=2 (RepeatDelayCtr=11)
      4342865 FS Control Sent: Ctrl=65607, Param=0
      4342896 Button held, flags=X05, repeat set: bRef=0, Joy=1, Btn=2, (RepeatOk sets 2)
      4342896 [buttons] 12=R1,2,C65607,0
      4342896 Repeating flag set: bRef=0, Joy=1, Btn=2 (RepeatDelayCtr=11)
      4342896 FS Control Sent: Ctrl=65607, Param=0
      4342896 Button held, flags=X05, repeat set: bRef=0, Joy=1, Btn=2, (Result 4)
      4342896 [buttons] 12=R1,2,C65607,0
      4342927 Button held, flags=X05, repeat set: bRef=0, Joy=1, Btn=2, (RepeatOk sets 2)
      4342927 [buttons] 12=R1,2,C65607,0
      4342927 Repeating flag set: bRef=0, Joy=1, Btn=2 (RepeatDelayCtr=11)
      4342927 FS Control Sent: Ctrl=65607, Param=0
      4342958 Button held, flags=X05, repeat set: bRef=0, Joy=1, Btn=2, (RepeatOk sets 2)
      4342958 [buttons] 12=R1,2,C65607,0
      4342958 Repeating flag set: bRef=0, Joy=1, Btn=2 (RepeatDelayCtr=11)
      4342958 FS Control Sent: Ctrl=65607, Param=0
      4342990 Button held, flags=X05, repeat set: bRef=0, Joy=1, Btn=2, (RepeatOk sets 2)
      4342990 [buttons] 12=R1,2,C65607,0
      4342990 Repeating flag set: bRef=0, Joy=1, Btn=2 (RepeatDelayCtr=11)
      4342990 FS Control Sent: Ctrl=65607, Param=0
      4342990 Button held, flags=X05, repeat set: bRef=0, Joy=1, Btn=2, (Result 4)
      4342990 [buttons] 12=R1,2,C65607,0
      4343036 Button held, flags=X05, repeat set: bRef=0, Joy=1, Btn=2, (RepeatOk sets 2)
      4343036 [buttons] 12=R1,2,C65607,0
      4343036 Repeating flag set: bRef=0, Joy=1, Btn=2 (RepeatDelayCtr=11)
      4343036 FS Control Sent: Ctrl=65607, Param=0
      4343068 Button held, flags=X05, repeat set: bRef=0, Joy=1, Btn=2, (RepeatOk sets 2)
      4343068 [buttons] 12=R1,2,C65607,0
      4343068 Repeating flag set: bRef=0, Joy=1, Btn=2 (RepeatDelayCtr=11)
      4343068 FS Control Sent: Ctrl=65607, Param=0
      4343099 Button held, flags=X05, repeat set: bRef=0, Joy=1, Btn=2, (RepeatOk sets 2)
      4343099 [buttons] 12=R1,2,C65607,0
      4343099 Repeating flag set: bRef=0, Joy=1, Btn=2 (RepeatDelayCtr=11)
      4343099 FS Control Sent: Ctrl=65607, Param=0
      4343099 Button held, flags=X05, repeat set: bRef=0, Joy=1, Btn=2, (Result 4)
      4343099 [buttons] 12=R1,2,C65607,0
      4343130 Button held, flags=X05, repeat set: bRef=0, Joy=1, Btn=2, (RepeatOk sets 2)
      4343130 [buttons] 12=R1,2,C65607,0
      4343130 Repeating flag set: bRef=0, Joy=1, Btn=2 (RepeatDelayCtr=11)
      4343130 FS Control Sent: Ctrl=65607, Param=0
      4343177 Button held, flags=X05, repeat set: bRef=0, Joy=1, Btn=2, (RepeatOk sets 2)
      4343177 [buttons] 12=R1,2,C65607,0
      4343177 Repeating flag set: bRef=0, Joy=1, Btn=2 (RepeatDelayCtr=11)
      4343177 FS Control Sent: Ctrl=65607, Param=0
      4343208 Button held, flags=X05, repeat set: bRef=0, Joy=1, Btn=2, (RepeatOk sets 2)
      4343208 [buttons] 12=R1,2,C65607,0
      4343208 Repeating flag set: bRef=0, Joy=1, Btn=2 (RepeatDelayCtr=11)
      4343208 FS Control Sent: Ctrl=65607, Param=0
      4343208 Button held, flags=X05, repeat set: bRef=0, Joy=1, Btn=2, (Result 4)
      4343208 [buttons] 12=R1,2,C65607,0
      4343239 Button held, flags=X05, repeat set: bRef=0, Joy=1, Btn=2, (RepeatOk sets 2)
      4343239 [buttons] 12=R1,2,C65607,0
      4343239 Repeating flag set: bRef=0, Joy=1, Btn=2 (RepeatDelayCtr=11)
      4343239 FS Control Sent: Ctrl=65607, Param=0
      4343270 Button held, flags=X05, repeat set: bRef=0, Joy=1, Btn=2, (RepeatOk sets 2)
      4343270 [buttons] 12=R1,2,C65607,0
      4343270 Repeating flag set: bRef=0, Joy=1, Btn=2 (RepeatDelayCtr=11)
      4343270 FS Control Sent: Ctrl=65607, Param=0
      4343270 Button held, flags=X05, repeat set: bRef=0, Joy=1, Btn=2, (Result 4)
      4343270 [buttons] 12=R1,2,C65607,0
      4343302 Button held, flags=X05, repeat set: bRef=0, Joy=1, Btn=2, (RepeatOk sets 2)
      4343302 [buttons] 12=R1,2,C65607,0
      4343302 Repeating flag set: bRef=0, Joy=1, Btn=2 (RepeatDelayCtr=11)
      4343302 FS Control Sent: Ctrl=65607, Param=0
      4343348 Button held, flags=X05, repeat set: bRef=0, Joy=1, Btn=2, (RepeatOk sets 2)
      4343348 [buttons] 12=R1,2,C65607,0
      4343348 Repeating flag set: bRef=0, Joy=1, Btn=2 (RepeatDelayCtr=11)
      4343348 FS Control Sent: Ctrl=65607, Param=0
      4343380 Button held, flags=X05, repeat set: bRef=0, Joy=1, Btn=2, (RepeatOk sets 2)
      4343380 [buttons] 12=R1,2,C65607,0
      4343380 Repeating flag set: bRef=0, Joy=1, Btn=2 (RepeatDelayCtr=11)
      4343380 FS Control Sent: Ctrl=65607, Param=0
      4343380 Button held, flags=X05, repeat set: bRef=0, Joy=1, Btn=2, (Result 4)
      4343380 [buttons] 12=R1,2,C65607,0
      4343411 Button held, flags=X05, repeat set: bRef=0, Joy=1, Btn=2, (RepeatOk sets 2)
      4343411 [buttons] 12=R1,2,C65607,0
      4343411 Repeating flag set: bRef=0, Joy=1, Btn=2 (RepeatDelayCtr=11)
      4343411 FS Control Sent: Ctrl=65607, Param=0
      4343442 Button held, flags=X05, repeat set: bRef=0, Joy=1, Btn=2, (RepeatOk sets 2)
      4343442 [buttons] 12=R1,2,C65607,0
      4343442 Repeating flag set: bRef=0, Joy=1, Btn=2 (RepeatDelayCtr=11)
      4343442 FS Control Sent: Ctrl=65607, Param=0
      4343442 Button held, flags=X05, repeat set: bRef=0, Joy=1, Btn=2, (Result 4)
      4343442 [buttons] 12=R1,2,C65607,0
      4343489 Button held, flags=X05, repeat set: bRef=0, Joy=1, Btn=2, (RepeatOk sets 2)
      4343489 [buttons] 12=R1,2,C65607,0
      4343489 Repeating flag set: bRef=0, Joy=1, Btn=2 (RepeatDelayCtr=11)
      4343489 FS Control Sent: Ctrl=65607, Param=0
      4343520 Button held, flags=X05, repeat set: bRef=0, Joy=1, Btn=2, (RepeatOk sets 2)
      4343520 [buttons] 12=R1,2,C65607,0
      4343520 Repeating flag set: bRef=0, Joy=1, Btn=2 (RepeatDelayCtr=11)
      4343520 FS Control Sent: Ctrl=65607, Param=0
      4343551 Button held, flags=X05, repeat set: bRef=0, Joy=1, Btn=2, (RepeatOk sets 2)
      4343551 [buttons] 12=R1,2,C65607,0
      4343551 Repeating flag set: bRef=0, Joy=1, Btn=2 (RepeatDelayCtr=11)
      4343551 FS Control Sent: Ctrl=65607, Param=0
      4343551 Button held, flags=X05, repeat set: bRef=0, Joy=1, Btn=2, (Result 4)
      4343551 [buttons] 12=R1,2,C65607,0
      4343582 Button held, flags=X05, repeat set: bRef=0, Joy=1, Btn=2, (RepeatOk sets 2)
      4343582 [buttons] 12=R1,2,C65607,0
      4343582 Repeating flag set: bRef=0, Joy=1, Btn=2 (RepeatDelayCtr=11)
      4343582 FS Control Sent: Ctrl=65607, Param=0
      4343614 Button held, flags=X05, repeat set: bRef=0, Joy=1, Btn=2, (RepeatOk sets 2)
      4343629 [buttons] 12=R1,2,C65607,0
      4343629 Repeating flag set: bRef=0, Joy=1, Btn=2 (RepeatDelayCtr=11)
      4343629 FS Control Sent: Ctrl=65607, Param=0
      4343629 Button held, flags=X05, repeat set: bRef=0, Joy=1, Btn=2, (Result 4)
      4343629 [buttons] 12=R1,2,C65607,0
      4343660 Button held, flags=X05, repeat set: bRef=0, Joy=1, Btn=2, (RepeatOk sets 2)
      4343660 [buttons] 12=R1,2,C65607,0
      4343660 Repeating flag set: bRef=0, Joy=1, Btn=2 (RepeatDelayCtr=11)
      4343660 FS Control Sent: Ctrl=65607, Param=0
      4343692 Button held, flags=X05, repeat set: bRef=0, Joy=1, Btn=2, (RepeatOk sets 2)
      4343692 [buttons] 12=R1,2,C65607,0
      4343692 Repeating flag set: bRef=0, Joy=1, Btn=2 (RepeatDelayCtr=11)
      4343692 FS Control Sent: Ctrl=65607, Param=0
      4343723 Button held, flags=X05, repeat set: bRef=0, Joy=1, Btn=2, (RepeatOk sets 2)
      4343723 [buttons] 12=R1,2,C65607,0
      4343723 Repeating flag set: bRef=0, Joy=1, Btn=2 (RepeatDelayCtr=11)
      4343723 FS Control Sent: Ctrl=65607, Param=0
      4343723 Button held, flags=X05, repeat set: bRef=0, Joy=1, Btn=2, (Result 4)
      4343723 [buttons] 12=R1,2,C65607,0
      4343754 Button held, flags=X05, repeat set: bRef=0, Joy=1, Btn=2, (RepeatOk sets 2)
      4343754 [buttons] 12=R1,2,C65607,0
      4343754 Repeating flag set: bRef=0, Joy=1, Btn=2 (RepeatDelayCtr=11)
      4343754 FS Control Sent: Ctrl=65607, Param=0
      4343801 Button held, flags=X05, repeat set: bRef=0, Joy=1, Btn=2, (RepeatOk sets 2)
      4343801 [buttons] 12=R1,2,C65607,0
      4343801 Repeating flag set: bRef=0, Joy=1, Btn=2 (RepeatDelayCtr=11)
      4343801 FS Control Sent: Ctrl=65607, Param=0
      4343801 Button held, flags=X05, repeat set: bRef=0, Joy=1, Btn=2, (Result 4)
      4343801 [buttons] 12=R1,2,C65607,0
      4343832 Button held, flags=X05, repeat set: bRef=0, Joy=1, Btn=2, (RepeatOk sets 2)
      4343832 [buttons] 12=R1,2,C65607,0
      4343832 Repeating flag set: bRef=0, Joy=1, Btn=2 (RepeatDelayCtr=11)
      4343832 FS Control Sent: Ctrl=65607, Param=0
      4343863 Button held, flags=X05, repeat set: bRef=0, Joy=1, Btn=2, (RepeatOk sets 2)
      4343863 [buttons] 12=R1,2,C65607,0
      4343863 Repeating flag set: bRef=0, Joy=1, Btn=2 (RepeatDelayCtr=11)
      4343863 FS Control Sent: Ctrl=65607, Param=0
      4343894 Button held, flags=X05, repeat set: bRef=0, Joy=1, Btn=2, (RepeatOk sets 2)
      4343894 [buttons] 12=R1,2,C65607,0
      4343894 Repeating flag set: bRef=0, Joy=1, Btn=2 (RepeatDelayCtr=11)
      4343894 FS Control Sent: Ctrl=65607, Param=0
      4343894 Button held, flags=X05, repeat set: bRef=0, Joy=1, Btn=2, (Result 4)
      4343894 [buttons] 12=R1,2,C65607,0
      4343941 Button held, flags=X05, repeat set: bRef=0, Joy=1, Btn=2, (RepeatOk sets 2)
      4343941 [buttons] 12=R1,2,C65607,0
      4343941 Repeating flag set: bRef=0, Joy=1, Btn=2 (RepeatDelayCtr=11)
      4343941 FS Control Sent: Ctrl=65607, Param=0
      4343972 Button held, flags=X05, repeat set: bRef=0, Joy=1, Btn=2, (RepeatOk sets 2)
      4343972 [buttons] 12=R1,2,C65607,0
      4343972 Repeating flag set: bRef=0, Joy=1, Btn=2 (RepeatDelayCtr=11)
      4343972 FS Control Sent: Ctrl=65607, Param=0
      4344004 Button held, flags=X05, repeat set: bRef=0, Joy=1, Btn=2, (RepeatOk sets 2)
      4344004 [buttons] 12=R1,2,C65607,0
      4344004 Repeating flag set: bRef=0, Joy=1, Btn=2 (RepeatDelayCtr=11)
      4344004 FS Control Sent: Ctrl=65607, Param=0
      4344004 Button held, flags=X05, repeat set: bRef=0, Joy=1, Btn=2, (Result 4)
      4344004 [buttons] 12=R1,2,C65607,0
      4344035 Button held, flags=X05, repeat set: bRef=0, Joy=1, Btn=2, (RepeatOk sets 2)
      4344035 [buttons] 12=R1,2,C65607,0
      4344035 Repeating flag set: bRef=0, Joy=1, Btn=2 (RepeatDelayCtr=11)
      4344035 FS Control Sent: Ctrl=65607, Param=0
      4344066 Button held, flags=X05, repeat set: bRef=0, Joy=1, Btn=2, (RepeatOk sets 2)
      4344066 [buttons] 12=R1,2,C65607,0
      4344066 Repeating flag set: bRef=0, Joy=1, Btn=2 (RepeatDelayCtr=11)
      4344066 FS Control Sent: Ctrl=65607, Param=0
      4344066 Button held, flags=X05, repeat set: bRef=0, Joy=1, Btn=2, (Result 4)
      4344066 [buttons] 12=R1,2,C65607,0
      4344113 Button held, flags=X05, repeat set: bRef=0, Joy=1, Btn=2, (RepeatOk sets 2)
      4344113 [buttons] 12=R1,2,C65607,0
      4344113 Repeating flag set: bRef=0, Joy=1, Btn=2 (RepeatDelayCtr=11)
      4344113 FS Control Sent: Ctrl=65607, Param=0
      4344144 Button held, flags=X05, repeat set: bRef=0, Joy=1, Btn=2, (RepeatOk sets 2)
      4344144 [buttons] 12=R1,2,C65607,0
      4344144 Repeating flag set: bRef=0, Joy=1, Btn=2 (RepeatDelayCtr=11)
      4344144 FS Control Sent: Ctrl=65607, Param=0
      4344175 Button held, flags=X05, repeat set: bRef=0, Joy=1, Btn=2, (RepeatOk sets 2)
      4344175 [buttons] 12=R1,2,C65607,0
      4344175 Repeating flag set: bRef=0, Joy=1, Btn=2 (RepeatDelayCtr=11)
      4344175 FS Control Sent: Ctrl=65607, Param=0
      4344175 Button held, flags=X05, repeat set: bRef=0, Joy=1, Btn=2, (Result 4)
      4344175 [buttons] 12=R1,2,C65607,0
      4344206 Button changed: bRef=0, Joy=1, Btn=2, Released
      4353972 Sim stopped: average frame rate for last 49 secs = 29.8 fps
      4359775 LogOptions changed, now 00000000 00000001
      4422691 Sim stopped: average frame rate for last 63 secs = 29.9 fps
      4516478 Sim stopped: average frame rate for last 54 secs = 29.9 fps
     
    -- 
     
    My FSUIPC4.ini:
     
    [General]
    UpdatedByVersion=4923
    History=02RB9XA60IA1BXIELNH2H
    InitDelayDevicesToo=No
    UseSystemTime=Yes
    UseMidMouseBtn=Yes
    MouseWheelMove=No
    MouseWheelTrim=No
    MouseWheelTrimSpeed=1
    JoystickTimeout=20
    PollGFTQ6=Yes
    BlankDisplays=No
    FixControlAccel=No
    FixMachSpeedBug=Yes
    DeleteVehiclesForAES=Yes
    AutoScanDevices=Yes
    VisibilityOptions=No
    OneCloudLayer=No
    CloudTurbulence=Yes
    CloudIcing=Yes
    GenerateCirrus=No
    SuppressCloudTurbulence=No
    MaxIce=3
    MinIce=-4
    UpperWindGusts=Yes
    SuppressWindTurbulence=No
    SuppressWindVariance=No
    WindTurbulence=Yes
    TurbulenceRate=1.0,5.0
    TurbulenceDivisor=20,20,40,40
    SuppressAllGusts=No
    MaxSurfaceWind=0
    WindLimitLevel=200
    WindDiscardLevel=400
    WindAjustAltitude=No
    WindAjustAltitudeBy=2000
    SmoothBySimTime=No
    WindSmoothing=Yes
    WindSmoothness=2
    WindSmoothAirborneOnly=Yes
    PressureSmoothness=0
    TemperatureSmoothness=0
    DisconnTrimForAP=No
    ZeroElevForAPAlt=No
    ThrottleSyncAll=No
    WhiteMessages=No
    ShowPMcontrols=No
    SpoilerIncrement=512
    MagicBattery=Yes
    RudderSpikeRemoval=No
    ElevatorSpikeRemoval=No
    AileronSpikeRemoval=No
    ReversedElevatorTrim=No
    ClockSync=Yes
    ClockSyncMins=5
    ClearWeatherDynamics=No
    OwnWeatherChanges=Yes
    TimeForSelect=4
    LoadFlightMenu=No
    LoadPlanMenu=No
    PauseAfterCrash=No
    BrakeReleaseThreshold=75
    SaveDataWithFlights=No
    ZapSound=firework
    ShortAircraftNameOk=Substring
    UseProfiles=Yes
    EnableMouseLook=Yes
    AxesWrongRange=No
    TCASid=Flight
    TCASrange=40
    AxisCalibration=No
    DirectAxesToCalibs=No
    ShowMultilineWindow=Yes
    SuppressSingleline=No
    SuppressMultilineFS=No
    AxisIntercepts=No
    DontResetAxes=No
    InitDelay=0
    GetNearestAirports=Yes
    OOMcheck=Yes
    WeatherReadFactor=2
    WeatherRewriteSeconds=1
    CustomWeatherModify=No
    SimConnectStallTime=1
    LuaRerunDelay=66
    Console=No
    FSVersionUsed="Microsoft Flight Simulator X",10.0.61637.0
    SimConnectUsed=10.0.61259.0
     
    [JoyNames]
    AutoAssignLetters=No
    0=Saitek Pro Flight Rudder Pedals
    0.GUID={7B454890-5DEC-11E3-8005-444553540000}
    1=Saitek Pro Flight Yoke
    1.GUID={7B454890-5DEC-11E3-8006-444553540000}
    2=Saitek Pro Flight Quadrant
    2.GUID={7B456FA0-5DEC-11E3-8007-444553540000}
     
    [buttons]
    ButtonRepeat=20,10
    1=H1,0,K0,10
    2=P1,1,C65567,0
    3=P2,0,C66059,0
    4=P2,1,C66060,0
    5=P2,4,C66079,0
    6=P2,5,C66080,0
    7=P2,2,C66239,0
    8=P2,3,C66240,0
    9=P2,8,C65752,0
    10=U2,8,C65752,0
    11=R1,3,C65615,0
    12=R1,2,C65607,0
    13=P1,5,C65758,0
    14=P1,4,C65759,0
    15=R1,7,C65883,0
    16=R1,6,C65884,0
    17=R2,6,C65966,0
    18=U2,6,C65967,0
    19=R2,7,C65971,0
    20=U2,7,C65972,0
     
    [AutoSave]
    Next=1
    Interval=60
    Files=10
    SaveOnGround=No
    AutoSaveEnabled=Yes
     
    [GPSout]
    GPSoutEnabled=No
    Port=COM1
    Speed=4800
    Interval=2000
    PosTo6Decimal=No
    SimModeIndicator=No
    Sentences=
     
    [GPSout2]
    GPSoutEnabled=No
    Port=<none set>
    Speed=4800
    Interval=2000
    PosTo6Decimal=No
    SimModeIndicator=No
    Sentences=
     
    [WideServer]
    WideFSenabled=Yes
     
    [sounds]
    Path=C:\FSX\Sound\
    Device1=Elsődleges hangillesztő
    Device2=Hangszórók (Realtek High Definition Audio)
    Device3=Realtek Digital Output (Realtek High Definition Audio)
    Device4=Realtek Digital Output(Optical) (Realtek High Definition Audio)
     
    [Axes]
    RangeRepeatRate=10
    0=0X,256,D,7,0,0,0
    1=0Y,256,D,8,0,0,0
    2=0R,256,D,47,0,0,0
    3=1X,256,D,45,0,0,0
    4=1Y,256,D,46,0,0,0
    5=2X,256,D,9,0,0,0
    6=2Y,256,D,10,0,0,0
     
    [Profile.C172]
    1=Cessna Skyhawk 172SP Paint1
    2=Dynamic_FG 02
     
    [Axes.C172]
    RangeRepeatRate=10
    0=0X,256,D,7,0,0,0
    1=0Y,256,D,8,0,0,0
    2=0R,256,D,47,36,0,0
    3=1X,256,D,45,0,0,0
    4=1Y,256,D,46,0,0,0
    5=2X,256,D,48,0,0,0
    6=2Z,256,D,6,0,0,0
     
    [JoystickCalibration]
    AllowSuppressForPFCquad=Yes
    ExcludeThrottleSet=Yes
    ExcludeMixtureSet=Yes
    ExcludePropPitchSet=Yes
    SepRevsJetsOnly=No
    ApplyHeloTrim=No
    UseAxisControlsForNRZ=No
    FlapsSetControl=0
    FlapDetents=No
    ReverserControl=66292
    Reverser1Control=66422
    Reverser2Control=66425
    Reverser3Control=66428
    Reverser4Control=66431
    MaxThrottleForReverser=256
    AileronTrimControl=66731
    RudderTrimControl=66732
    CowlFlaps1Control=66162
    CowlFlaps2Control=66163
    CowlFlaps3Control=66164
    CowlFlaps4Control=66165
    SteeringTillerControl=0
    MaxSteerSpeed=60
    Aileron=-16383,0,0,16191
    Elevator=-16384,0,0,16383
    Rudder=-16383,0,0,16319
    Throttle=-16380,16380
    Mixture=-16253,16383
    LeftBrake=-16383,16384/16
    RightBrake=-16383,16384/16
    Throttle1=-16380,-11833,-11833,16256/32
    Throttle2=-16384,-11833,-11833,16128/32
    SlewSide=-16383,0,0,16384
    SlewAhead=-16384,608,832,16192
    SlewHeading=-16192,-128,0,16384
    SteeringTiller=-16380,-390,-130,16256/16
    SlopeElevator=4
    SlopeAileron=4
    SlopeRudder=4
    SlopeSteeringTiller=4
    SlopeThrottle=10
    SlopeSlewSide=10
    SlopeSlewAhead=10
    SlopeSlewHeading=10
    SlopeThrottle1=5
    SlopeThrottle2=5
     
    [Profile.B737]
    1=PMDG 737-800NGX European Winglets
    2=Flight One Conquest 441
     
    [Axes.B737]
    RangeRepeatRate=10
    0=0X,256,D,7,0,0,0
    1=0Y,256,D,8,0,0,0
    2=0R,256,D,47,0,0,0
    3=1X,256,D,45,0,0,0
    4=1Y,256,D,46,0,0,0
    5=2X,256,D,9,0,0,0
    6=2Y,256,D,10,0,0,0
    7=2Z,256,D,36,0,0,0
     

     

    Pete, please disregard, after checking again (starting up with the default C172, this problem does not exists. Switched to PMDG 737NGX, no problem, switched to C441, now it also works correct. I don't know what happened, but now it seems everything is okay.)

     

    You may close or remove the topic if you want.

     

    Best regards,

    Tamas

  5. Trim unintentionally goes up

    in FSUIPC Support Pete Dowson Modules

    Posted

    Hi Pete,

     

    I have a Flight One Cessna 441 Conquest II in FSX. At the before takeoff checklist I found that the trim is not set to takeoff, but it is set to full nose up position. I tried to fix this setting by pushing the trim to takeoff position, but I found that after I finish setting the trim (I have repeating enabled for this control, joystick button 1,2 like this in FSUIPC4.ini: 12=R1,2,C65607,0) the trim wheel just starts to go down, this way trimming the aircraft nose up. I tested to push joystick button 1,3, which is for the trim down (nose up), and it goes double the rate as is goes accidentally when I just simply release any trim control, and it goes down (nose up) by itself.

     

    Can you please help me locate where I am mistaken?

     

    Here is a little logging, and here is my FSUIPC4.ini (the log file doesn't say anything about somebody or something manipulating my joystick button 1,3 or trim down (nose up))

     

    ********* FSUIPC4, Version 4.923 by Pete Dowson *********
    User Name="Bagó Tamás"
    User Addr="bago.tamas@gmail.com"
    FSUIPC4 Key is provided
    WIDEFS7 not user registered, or expired
      4304629 System time = 26/12/2013 00:27:48, Simulator time = 12:39:34 (11:39Z)
    [Continuation log requested by user]
    Running inside FSX on Windows 7
    Module base=52F20000
      4304629 LogOptions changed, now 40000000 00000001
      4338091 Button changed: bRef=0, Joy=1, Btn=2, Pressed
      4338091 [buttons] 12=R1,2,C65607,0
      4338091 Repeating flag set: bRef=0, Joy=1, Btn=2 (RepeatDelayCtr=1)
      4338091 FS Control Sent: Ctrl=65607, Param=0
      4338263 Button held, flags=X05, repeat set: bRef=0, Joy=1, Btn=2, (RepeatOk sets 2)
      4338263 [buttons] 12=R1,2,C65607,0
      4338263 Repeating flag set: bRef=0, Joy=1, Btn=2 (RepeatDelayCtr=11)
      4338263 FS Control Sent: Ctrl=65607, Param=0
      4338263 Button held, flags=X05, repeat set: bRef=0, Joy=1, Btn=2, (Result 4)
      4338263 [buttons] 12=R1,2,C65607,0
      4338294 Button held, flags=X05, repeat set: bRef=0, Joy=1, Btn=2, (RepeatOk sets 2)
      4338294 [buttons] 12=R1,2,C65607,0
      4338294 Repeating flag set: bRef=0, Joy=1, Btn=2 (RepeatDelayCtr=11)
      4338294 FS Control Sent: Ctrl=65607, Param=0
      4338325 Button held, flags=X05, repeat set: bRef=0, Joy=1, Btn=2, (RepeatOk sets 2)
      4338325 [buttons] 12=R1,2,C65607,0
      4338325 Repeating flag set: bRef=0, Joy=1, Btn=2 (RepeatDelayCtr=11)
      4338325 FS Control Sent: Ctrl=65607, Param=0
      4338356 Button held, flags=X05, repeat set: bRef=0, Joy=1, Btn=2, (RepeatOk sets 2)
      4338356 [buttons] 12=R1,2,C65607,0
      4338356 Repeating flag set: bRef=0, Joy=1, Btn=2 (RepeatDelayCtr=11)
      4338356 FS Control Sent: Ctrl=65607, Param=0
      4338356 Button held, flags=X05, repeat set: bRef=0, Joy=1, Btn=2, (Result 4)
      4338356 [buttons] 12=R1,2,C65607,0
      4338388 Button held, flags=X05, repeat set: bRef=0, Joy=1, Btn=2, (RepeatOk sets 2)
      4338388 [buttons] 12=R1,2,C65607,0
      4338388 Repeating flag set: bRef=0, Joy=1, Btn=2 (RepeatDelayCtr=11)
      4338388 FS Control Sent: Ctrl=65607, Param=0
      4338434 Button held, flags=X05, repeat set: bRef=0, Joy=1, Btn=2, (RepeatOk sets 2)
      4338434 [buttons] 12=R1,2,C65607,0
      4338434 Repeating flag set: bRef=0, Joy=1, Btn=2 (RepeatDelayCtr=11)
      4338434 FS Control Sent: Ctrl=65607, Param=0
      4338434 Button held, flags=X05, repeat set: bRef=0, Joy=1, Btn=2, (Result 4)
      4338434 [buttons] 12=R1,2,C65607,0
      4338466 Button held, flags=X05, repeat set: bRef=0, Joy=1, Btn=2, (RepeatOk sets 2)
      4338466 [buttons] 12=R1,2,C65607,0
      4338466 Repeating flag set: bRef=0, Joy=1, Btn=2 (RepeatDelayCtr=11)
      4338466 FS Control Sent: Ctrl=65607, Param=0
      4338497 Button held, flags=X05, repeat set: bRef=0, Joy=1, Btn=2, (RepeatOk sets 2)
      4338497 [buttons] 12=R1,2,C65607,0
      4338497 Repeating flag set: bRef=0, Joy=1, Btn=2 (RepeatDelayCtr=11)
      4338497 FS Control Sent: Ctrl=65607, Param=0
      4338528 Button held, flags=X05, repeat set: bRef=0, Joy=1, Btn=2, (RepeatOk sets 2)
      4338528 [buttons] 12=R1,2,C65607,0
      4338528 Repeating flag set: bRef=0, Joy=1, Btn=2 (RepeatDelayCtr=11)
      4338528 FS Control Sent: Ctrl=65607, Param=0
      4338528 Button held, flags=X05, repeat set: bRef=0, Joy=1, Btn=2, (Result 4)
      4338528 [buttons] 12=R1,2,C65607,0
      4338575 Button held, flags=X05, repeat set: bRef=0, Joy=1, Btn=2, (RepeatOk sets 2)
      4338575 [buttons] 12=R1,2,C65607,0
      4338575 Repeating flag set: bRef=0, Joy=1, Btn=2 (RepeatDelayCtr=11)
      4338575 FS Control Sent: Ctrl=65607, Param=0
      4338606 Button held, flags=X05, repeat set: bRef=0, Joy=1, Btn=2, (RepeatOk sets 2)
      4338606 [buttons] 12=R1,2,C65607,0
      4338606 Repeating flag set: bRef=0, Joy=1, Btn=2 (RepeatDelayCtr=11)
      4338606 FS Control Sent: Ctrl=65607, Param=0
      4338637 Button held, flags=X05, repeat set: bRef=0, Joy=1, Btn=2, (RepeatOk sets 2)
      4338637 [buttons] 12=R1,2,C65607,0
      4338637 Repeating flag set: bRef=0, Joy=1, Btn=2 (RepeatDelayCtr=11)
      4338637 FS Control Sent: Ctrl=65607, Param=0
      4338637 Button held, flags=X05, repeat set: bRef=0, Joy=1, Btn=2, (Result 4)
      4338637 [buttons] 12=R1,2,C65607,0
      4338668 Button held, flags=X05, repeat set: bRef=0, Joy=1, Btn=2, (RepeatOk sets 2)
      4338668 [buttons] 12=R1,2,C65607,0
      4338668 Repeating flag set: bRef=0, Joy=1, Btn=2 (RepeatDelayCtr=11)
      4338668 FS Control Sent: Ctrl=65607, Param=0
      4338700 Button held, flags=X05, repeat set: bRef=0, Joy=1, Btn=2, (RepeatOk sets 2)
      4338700 [buttons] 12=R1,2,C65607,0
      4338700 Repeating flag set: bRef=0, Joy=1, Btn=2 (RepeatDelayCtr=11)
      4338700 FS Control Sent: Ctrl=65607, Param=0
      4338746 Button held, flags=X05, repeat set: bRef=0, Joy=1, Btn=2, (RepeatOk sets 2)
      4338746 [buttons] 12=R1,2,C65607,0
      4338746 Repeating flag set: bRef=0, Joy=1, Btn=2 (RepeatDelayCtr=11)
      4338746 FS Control Sent: Ctrl=65607, Param=0
      4338746 Button held, flags=X05, repeat set: bRef=0, Joy=1, Btn=2, (Result 4)
      4338746 [buttons] 12=R1,2,C65607,0
      4338778 Button held, flags=X05, repeat set: bRef=0, Joy=1, Btn=2, (RepeatOk sets 2)
      4338778 [buttons] 12=R1,2,C65607,0
      4338778 Repeating flag set: bRef=0, Joy=1, Btn=2 (RepeatDelayCtr=11)
      4338778 FS Control Sent: Ctrl=65607, Param=0
      4338809 Button held, flags=X05, repeat set: bRef=0, Joy=1, Btn=2, (RepeatOk sets 2)
      4338809 [buttons] 12=R1,2,C65607,0
      4338809 Repeating flag set: bRef=0, Joy=1, Btn=2 (RepeatDelayCtr=11)
      4338809 FS Control Sent: Ctrl=65607, Param=0
      4338809 Button held, flags=X05, repeat set: bRef=0, Joy=1, Btn=2, (Result 4)
      4338809 [buttons] 12=R1,2,C65607,0
      4338840 Button held, flags=X05, repeat set: bRef=0, Joy=1, Btn=2, (RepeatOk sets 2)
      4338840 [buttons] 12=R1,2,C65607,0
      4338840 Repeating flag set: bRef=0, Joy=1, Btn=2 (RepeatDelayCtr=11)
      4338840 FS Control Sent: Ctrl=65607, Param=0
      4338871 Button changed: bRef=0, Joy=1, Btn=2, Released
      4342724 Button changed: bRef=0, Joy=1, Btn=2, Pressed
      4342724 [buttons] 12=R1,2,C65607,0
      4342724 Repeating flag set: bRef=0, Joy=1, Btn=2 (RepeatDelayCtr=1)
      4342724 FS Control Sent: Ctrl=65607, Param=0
      4342865 Button held, flags=X05, repeat set: bRef=0, Joy=1, Btn=2, (RepeatOk sets 2)
      4342865 [buttons] 12=R1,2,C65607,0
      4342865 Repeating flag set: bRef=0, Joy=1, Btn=2 (RepeatDelayCtr=11)
      4342865 FS Control Sent: Ctrl=65607, Param=0
      4342896 Button held, flags=X05, repeat set: bRef=0, Joy=1, Btn=2, (RepeatOk sets 2)
      4342896 [buttons] 12=R1,2,C65607,0
      4342896 Repeating flag set: bRef=0, Joy=1, Btn=2 (RepeatDelayCtr=11)
      4342896 FS Control Sent: Ctrl=65607, Param=0
      4342896 Button held, flags=X05, repeat set: bRef=0, Joy=1, Btn=2, (Result 4)
      4342896 [buttons] 12=R1,2,C65607,0
      4342927 Button held, flags=X05, repeat set: bRef=0, Joy=1, Btn=2, (RepeatOk sets 2)
      4342927 [buttons] 12=R1,2,C65607,0
      4342927 Repeating flag set: bRef=0, Joy=1, Btn=2 (RepeatDelayCtr=11)
      4342927 FS Control Sent: Ctrl=65607, Param=0
      4342958 Button held, flags=X05, repeat set: bRef=0, Joy=1, Btn=2, (RepeatOk sets 2)
      4342958 [buttons] 12=R1,2,C65607,0
      4342958 Repeating flag set: bRef=0, Joy=1, Btn=2 (RepeatDelayCtr=11)
      4342958 FS Control Sent: Ctrl=65607, Param=0
      4342990 Button held, flags=X05, repeat set: bRef=0, Joy=1, Btn=2, (RepeatOk sets 2)
      4342990 [buttons] 12=R1,2,C65607,0
      4342990 Repeating flag set: bRef=0, Joy=1, Btn=2 (RepeatDelayCtr=11)
      4342990 FS Control Sent: Ctrl=65607, Param=0
      4342990 Button held, flags=X05, repeat set: bRef=0, Joy=1, Btn=2, (Result 4)
      4342990 [buttons] 12=R1,2,C65607,0
      4343036 Button held, flags=X05, repeat set: bRef=0, Joy=1, Btn=2, (RepeatOk sets 2)
      4343036 [buttons] 12=R1,2,C65607,0
      4343036 Repeating flag set: bRef=0, Joy=1, Btn=2 (RepeatDelayCtr=11)
      4343036 FS Control Sent: Ctrl=65607, Param=0
      4343068 Button held, flags=X05, repeat set: bRef=0, Joy=1, Btn=2, (RepeatOk sets 2)
      4343068 [buttons] 12=R1,2,C65607,0
      4343068 Repeating flag set: bRef=0, Joy=1, Btn=2 (RepeatDelayCtr=11)
      4343068 FS Control Sent: Ctrl=65607, Param=0
      4343099 Button held, flags=X05, repeat set: bRef=0, Joy=1, Btn=2, (RepeatOk sets 2)
      4343099 [buttons] 12=R1,2,C65607,0
      4343099 Repeating flag set: bRef=0, Joy=1, Btn=2 (RepeatDelayCtr=11)
      4343099 FS Control Sent: Ctrl=65607, Param=0
      4343099 Button held, flags=X05, repeat set: bRef=0, Joy=1, Btn=2, (Result 4)
      4343099 [buttons] 12=R1,2,C65607,0
      4343130 Button held, flags=X05, repeat set: bRef=0, Joy=1, Btn=2, (RepeatOk sets 2)
      4343130 [buttons] 12=R1,2,C65607,0
      4343130 Repeating flag set: bRef=0, Joy=1, Btn=2 (RepeatDelayCtr=11)
      4343130 FS Control Sent: Ctrl=65607, Param=0
      4343177 Button held, flags=X05, repeat set: bRef=0, Joy=1, Btn=2, (RepeatOk sets 2)
      4343177 [buttons] 12=R1,2,C65607,0
      4343177 Repeating flag set: bRef=0, Joy=1, Btn=2 (RepeatDelayCtr=11)
      4343177 FS Control Sent: Ctrl=65607, Param=0
      4343208 Button held, flags=X05, repeat set: bRef=0, Joy=1, Btn=2, (RepeatOk sets 2)
      4343208 [buttons] 12=R1,2,C65607,0
      4343208 Repeating flag set: bRef=0, Joy=1, Btn=2 (RepeatDelayCtr=11)
      4343208 FS Control Sent: Ctrl=65607, Param=0
      4343208 Button held, flags=X05, repeat set: bRef=0, Joy=1, Btn=2, (Result 4)
      4343208 [buttons] 12=R1,2,C65607,0
      4343239 Button held, flags=X05, repeat set: bRef=0, Joy=1, Btn=2, (RepeatOk sets 2)
      4343239 [buttons] 12=R1,2,C65607,0
      4343239 Repeating flag set: bRef=0, Joy=1, Btn=2 (RepeatDelayCtr=11)
      4343239 FS Control Sent: Ctrl=65607, Param=0
      4343270 Button held, flags=X05, repeat set: bRef=0, Joy=1, Btn=2, (RepeatOk sets 2)
      4343270 [buttons] 12=R1,2,C65607,0
      4343270 Repeating flag set: bRef=0, Joy=1, Btn=2 (RepeatDelayCtr=11)
      4343270 FS Control Sent: Ctrl=65607, Param=0
      4343270 Button held, flags=X05, repeat set: bRef=0, Joy=1, Btn=2, (Result 4)
      4343270 [buttons] 12=R1,2,C65607,0
      4343302 Button held, flags=X05, repeat set: bRef=0, Joy=1, Btn=2, (RepeatOk sets 2)
      4343302 [buttons] 12=R1,2,C65607,0
      4343302 Repeating flag set: bRef=0, Joy=1, Btn=2 (RepeatDelayCtr=11)
      4343302 FS Control Sent: Ctrl=65607, Param=0
      4343348 Button held, flags=X05, repeat set: bRef=0, Joy=1, Btn=2, (RepeatOk sets 2)
      4343348 [buttons] 12=R1,2,C65607,0
      4343348 Repeating flag set: bRef=0, Joy=1, Btn=2 (RepeatDelayCtr=11)
      4343348 FS Control Sent: Ctrl=65607, Param=0
      4343380 Button held, flags=X05, repeat set: bRef=0, Joy=1, Btn=2, (RepeatOk sets 2)
      4343380 [buttons] 12=R1,2,C65607,0
      4343380 Repeating flag set: bRef=0, Joy=1, Btn=2 (RepeatDelayCtr=11)
      4343380 FS Control Sent: Ctrl=65607, Param=0
      4343380 Button held, flags=X05, repeat set: bRef=0, Joy=1, Btn=2, (Result 4)
      4343380 [buttons] 12=R1,2,C65607,0
      4343411 Button held, flags=X05, repeat set: bRef=0, Joy=1, Btn=2, (RepeatOk sets 2)
      4343411 [buttons] 12=R1,2,C65607,0
      4343411 Repeating flag set: bRef=0, Joy=1, Btn=2 (RepeatDelayCtr=11)
      4343411 FS Control Sent: Ctrl=65607, Param=0
      4343442 Button held, flags=X05, repeat set: bRef=0, Joy=1, Btn=2, (RepeatOk sets 2)
      4343442 [buttons] 12=R1,2,C65607,0
      4343442 Repeating flag set: bRef=0, Joy=1, Btn=2 (RepeatDelayCtr=11)
      4343442 FS Control Sent: Ctrl=65607, Param=0
      4343442 Button held, flags=X05, repeat set: bRef=0, Joy=1, Btn=2, (Result 4)
      4343442 [buttons] 12=R1,2,C65607,0
      4343489 Button held, flags=X05, repeat set: bRef=0, Joy=1, Btn=2, (RepeatOk sets 2)
      4343489 [buttons] 12=R1,2,C65607,0
      4343489 Repeating flag set: bRef=0, Joy=1, Btn=2 (RepeatDelayCtr=11)
      4343489 FS Control Sent: Ctrl=65607, Param=0
      4343520 Button held, flags=X05, repeat set: bRef=0, Joy=1, Btn=2, (RepeatOk sets 2)
      4343520 [buttons] 12=R1,2,C65607,0
      4343520 Repeating flag set: bRef=0, Joy=1, Btn=2 (RepeatDelayCtr=11)
      4343520 FS Control Sent: Ctrl=65607, Param=0
      4343551 Button held, flags=X05, repeat set: bRef=0, Joy=1, Btn=2, (RepeatOk sets 2)
      4343551 [buttons] 12=R1,2,C65607,0
      4343551 Repeating flag set: bRef=0, Joy=1, Btn=2 (RepeatDelayCtr=11)
      4343551 FS Control Sent: Ctrl=65607, Param=0
      4343551 Button held, flags=X05, repeat set: bRef=0, Joy=1, Btn=2, (Result 4)
      4343551 [buttons] 12=R1,2,C65607,0
      4343582 Button held, flags=X05, repeat set: bRef=0, Joy=1, Btn=2, (RepeatOk sets 2)
      4343582 [buttons] 12=R1,2,C65607,0
      4343582 Repeating flag set: bRef=0, Joy=1, Btn=2 (RepeatDelayCtr=11)
      4343582 FS Control Sent: Ctrl=65607, Param=0
      4343614 Button held, flags=X05, repeat set: bRef=0, Joy=1, Btn=2, (RepeatOk sets 2)
      4343629 [buttons] 12=R1,2,C65607,0
      4343629 Repeating flag set: bRef=0, Joy=1, Btn=2 (RepeatDelayCtr=11)
      4343629 FS Control Sent: Ctrl=65607, Param=0
      4343629 Button held, flags=X05, repeat set: bRef=0, Joy=1, Btn=2, (Result 4)
      4343629 [buttons] 12=R1,2,C65607,0
      4343660 Button held, flags=X05, repeat set: bRef=0, Joy=1, Btn=2, (RepeatOk sets 2)
      4343660 [buttons] 12=R1,2,C65607,0
      4343660 Repeating flag set: bRef=0, Joy=1, Btn=2 (RepeatDelayCtr=11)
      4343660 FS Control Sent: Ctrl=65607, Param=0
      4343692 Button held, flags=X05, repeat set: bRef=0, Joy=1, Btn=2, (RepeatOk sets 2)
      4343692 [buttons] 12=R1,2,C65607,0
      4343692 Repeating flag set: bRef=0, Joy=1, Btn=2 (RepeatDelayCtr=11)
      4343692 FS Control Sent: Ctrl=65607, Param=0
      4343723 Button held, flags=X05, repeat set: bRef=0, Joy=1, Btn=2, (RepeatOk sets 2)
      4343723 [buttons] 12=R1,2,C65607,0
      4343723 Repeating flag set: bRef=0, Joy=1, Btn=2 (RepeatDelayCtr=11)
      4343723 FS Control Sent: Ctrl=65607, Param=0
      4343723 Button held, flags=X05, repeat set: bRef=0, Joy=1, Btn=2, (Result 4)
      4343723 [buttons] 12=R1,2,C65607,0
      4343754 Button held, flags=X05, repeat set: bRef=0, Joy=1, Btn=2, (RepeatOk sets 2)
      4343754 [buttons] 12=R1,2,C65607,0
      4343754 Repeating flag set: bRef=0, Joy=1, Btn=2 (RepeatDelayCtr=11)
      4343754 FS Control Sent: Ctrl=65607, Param=0
      4343801 Button held, flags=X05, repeat set: bRef=0, Joy=1, Btn=2, (RepeatOk sets 2)
      4343801 [buttons] 12=R1,2,C65607,0
      4343801 Repeating flag set: bRef=0, Joy=1, Btn=2 (RepeatDelayCtr=11)
      4343801 FS Control Sent: Ctrl=65607, Param=0
      4343801 Button held, flags=X05, repeat set: bRef=0, Joy=1, Btn=2, (Result 4)
      4343801 [buttons] 12=R1,2,C65607,0
      4343832 Button held, flags=X05, repeat set: bRef=0, Joy=1, Btn=2, (RepeatOk sets 2)
      4343832 [buttons] 12=R1,2,C65607,0
      4343832 Repeating flag set: bRef=0, Joy=1, Btn=2 (RepeatDelayCtr=11)
      4343832 FS Control Sent: Ctrl=65607, Param=0
      4343863 Button held, flags=X05, repeat set: bRef=0, Joy=1, Btn=2, (RepeatOk sets 2)
      4343863 [buttons] 12=R1,2,C65607,0
      4343863 Repeating flag set: bRef=0, Joy=1, Btn=2 (RepeatDelayCtr=11)
      4343863 FS Control Sent: Ctrl=65607, Param=0
      4343894 Button held, flags=X05, repeat set: bRef=0, Joy=1, Btn=2, (RepeatOk sets 2)
      4343894 [buttons] 12=R1,2,C65607,0
      4343894 Repeating flag set: bRef=0, Joy=1, Btn=2 (RepeatDelayCtr=11)
      4343894 FS Control Sent: Ctrl=65607, Param=0
      4343894 Button held, flags=X05, repeat set: bRef=0, Joy=1, Btn=2, (Result 4)
      4343894 [buttons] 12=R1,2,C65607,0
      4343941 Button held, flags=X05, repeat set: bRef=0, Joy=1, Btn=2, (RepeatOk sets 2)
      4343941 [buttons] 12=R1,2,C65607,0
      4343941 Repeating flag set: bRef=0, Joy=1, Btn=2 (RepeatDelayCtr=11)
      4343941 FS Control Sent: Ctrl=65607, Param=0
      4343972 Button held, flags=X05, repeat set: bRef=0, Joy=1, Btn=2, (RepeatOk sets 2)
      4343972 [buttons] 12=R1,2,C65607,0
      4343972 Repeating flag set: bRef=0, Joy=1, Btn=2 (RepeatDelayCtr=11)
      4343972 FS Control Sent: Ctrl=65607, Param=0
      4344004 Button held, flags=X05, repeat set: bRef=0, Joy=1, Btn=2, (RepeatOk sets 2)
      4344004 [buttons] 12=R1,2,C65607,0
      4344004 Repeating flag set: bRef=0, Joy=1, Btn=2 (RepeatDelayCtr=11)
      4344004 FS Control Sent: Ctrl=65607, Param=0
      4344004 Button held, flags=X05, repeat set: bRef=0, Joy=1, Btn=2, (Result 4)
      4344004 [buttons] 12=R1,2,C65607,0
      4344035 Button held, flags=X05, repeat set: bRef=0, Joy=1, Btn=2, (RepeatOk sets 2)
      4344035 [buttons] 12=R1,2,C65607,0
      4344035 Repeating flag set: bRef=0, Joy=1, Btn=2 (RepeatDelayCtr=11)
      4344035 FS Control Sent: Ctrl=65607, Param=0
      4344066 Button held, flags=X05, repeat set: bRef=0, Joy=1, Btn=2, (RepeatOk sets 2)
      4344066 [buttons] 12=R1,2,C65607,0
      4344066 Repeating flag set: bRef=0, Joy=1, Btn=2 (RepeatDelayCtr=11)
      4344066 FS Control Sent: Ctrl=65607, Param=0
      4344066 Button held, flags=X05, repeat set: bRef=0, Joy=1, Btn=2, (Result 4)
      4344066 [buttons] 12=R1,2,C65607,0
      4344113 Button held, flags=X05, repeat set: bRef=0, Joy=1, Btn=2, (RepeatOk sets 2)
      4344113 [buttons] 12=R1,2,C65607,0
      4344113 Repeating flag set: bRef=0, Joy=1, Btn=2 (RepeatDelayCtr=11)
      4344113 FS Control Sent: Ctrl=65607, Param=0
      4344144 Button held, flags=X05, repeat set: bRef=0, Joy=1, Btn=2, (RepeatOk sets 2)
      4344144 [buttons] 12=R1,2,C65607,0
      4344144 Repeating flag set: bRef=0, Joy=1, Btn=2 (RepeatDelayCtr=11)
      4344144 FS Control Sent: Ctrl=65607, Param=0
      4344175 Button held, flags=X05, repeat set: bRef=0, Joy=1, Btn=2, (RepeatOk sets 2)
      4344175 [buttons] 12=R1,2,C65607,0
      4344175 Repeating flag set: bRef=0, Joy=1, Btn=2 (RepeatDelayCtr=11)
      4344175 FS Control Sent: Ctrl=65607, Param=0
      4344175 Button held, flags=X05, repeat set: bRef=0, Joy=1, Btn=2, (Result 4)
      4344175 [buttons] 12=R1,2,C65607,0
      4344206 Button changed: bRef=0, Joy=1, Btn=2, Released
      4353972 Sim stopped: average frame rate for last 49 secs = 29.8 fps
      4359775 LogOptions changed, now 00000000 00000001
      4422691 Sim stopped: average frame rate for last 63 secs = 29.9 fps
      4516478 Sim stopped: average frame rate for last 54 secs = 29.9 fps
     
    -- 
     
    My FSUIPC4.ini:
     
    [General]
    UpdatedByVersion=4923
    History=02RB9XA60IA1BXIELNH2H
    InitDelayDevicesToo=No
    UseSystemTime=Yes
    UseMidMouseBtn=Yes
    MouseWheelMove=No
    MouseWheelTrim=No
    MouseWheelTrimSpeed=1
    JoystickTimeout=20
    PollGFTQ6=Yes
    BlankDisplays=No
    FixControlAccel=No
    FixMachSpeedBug=Yes
    DeleteVehiclesForAES=Yes
    AutoScanDevices=Yes
    VisibilityOptions=No
    OneCloudLayer=No
    CloudTurbulence=Yes
    CloudIcing=Yes
    GenerateCirrus=No
    SuppressCloudTurbulence=No
    MaxIce=3
    MinIce=-4
    UpperWindGusts=Yes
    SuppressWindTurbulence=No
    SuppressWindVariance=No
    WindTurbulence=Yes
    TurbulenceRate=1.0,5.0
    TurbulenceDivisor=20,20,40,40
    SuppressAllGusts=No
    MaxSurfaceWind=0
    WindLimitLevel=200
    WindDiscardLevel=400
    WindAjustAltitude=No
    WindAjustAltitudeBy=2000
    SmoothBySimTime=No
    WindSmoothing=Yes
    WindSmoothness=2
    WindSmoothAirborneOnly=Yes
    PressureSmoothness=0
    TemperatureSmoothness=0
    DisconnTrimForAP=No
    ZeroElevForAPAlt=No
    ThrottleSyncAll=No
    WhiteMessages=No
    ShowPMcontrols=No
    SpoilerIncrement=512
    MagicBattery=Yes
    RudderSpikeRemoval=No
    ElevatorSpikeRemoval=No
    AileronSpikeRemoval=No
    ReversedElevatorTrim=No
    ClockSync=Yes
    ClockSyncMins=5
    ClearWeatherDynamics=No
    OwnWeatherChanges=Yes
    TimeForSelect=4
    LoadFlightMenu=No
    LoadPlanMenu=No
    PauseAfterCrash=No
    BrakeReleaseThreshold=75
    SaveDataWithFlights=No
    ZapSound=firework
    ShortAircraftNameOk=Substring
    UseProfiles=Yes
    EnableMouseLook=Yes
    AxesWrongRange=No
    TCASid=Flight
    TCASrange=40
    AxisCalibration=No
    DirectAxesToCalibs=No
    ShowMultilineWindow=Yes
    SuppressSingleline=No
    SuppressMultilineFS=No
    AxisIntercepts=No
    DontResetAxes=No
    InitDelay=0
    GetNearestAirports=Yes
    OOMcheck=Yes
    WeatherReadFactor=2
    WeatherRewriteSeconds=1
    CustomWeatherModify=No
    SimConnectStallTime=1
    LuaRerunDelay=66
    Console=No
    FSVersionUsed="Microsoft Flight Simulator X",10.0.61637.0
    SimConnectUsed=10.0.61259.0
     
    [JoyNames]
    AutoAssignLetters=No
    0=Saitek Pro Flight Rudder Pedals
    0.GUID={7B454890-5DEC-11E3-8005-444553540000}
    1=Saitek Pro Flight Yoke
    1.GUID={7B454890-5DEC-11E3-8006-444553540000}
    2=Saitek Pro Flight Quadrant
    2.GUID={7B456FA0-5DEC-11E3-8007-444553540000}
     
    [buttons]
    ButtonRepeat=20,10
    1=H1,0,K0,10
    2=P1,1,C65567,0
    3=P2,0,C66059,0
    4=P2,1,C66060,0
    5=P2,4,C66079,0
    6=P2,5,C66080,0
    7=P2,2,C66239,0
    8=P2,3,C66240,0
    9=P2,8,C65752,0
    10=U2,8,C65752,0
    11=R1,3,C65615,0
    12=R1,2,C65607,0
    13=P1,5,C65758,0
    14=P1,4,C65759,0
    15=R1,7,C65883,0
    16=R1,6,C65884,0
    17=R2,6,C65966,0
    18=U2,6,C65967,0
    19=R2,7,C65971,0
    20=U2,7,C65972,0
     
    [AutoSave]
    Next=1
    Interval=60
    Files=10
    SaveOnGround=No
    AutoSaveEnabled=Yes
     
    [GPSout]
    GPSoutEnabled=No
    Port=COM1
    Speed=4800
    Interval=2000
    PosTo6Decimal=No
    SimModeIndicator=No
    Sentences=
     
    [GPSout2]
    GPSoutEnabled=No
    Port=<none set>
    Speed=4800
    Interval=2000
    PosTo6Decimal=No
    SimModeIndicator=No
    Sentences=
     
    [WideServer]
    WideFSenabled=Yes
     
    [sounds]
    Path=C:\FSX\Sound\
    Device1=Elsődleges hangillesztő
    Device2=Hangszórók (Realtek High Definition Audio)
    Device3=Realtek Digital Output (Realtek High Definition Audio)
    Device4=Realtek Digital Output(Optical) (Realtek High Definition Audio)
     
    [Axes]
    RangeRepeatRate=10
    0=0X,256,D,7,0,0,0
    1=0Y,256,D,8,0,0,0
    2=0R,256,D,47,0,0,0
    3=1X,256,D,45,0,0,0
    4=1Y,256,D,46,0,0,0
    5=2X,256,D,9,0,0,0
    6=2Y,256,D,10,0,0,0
     
    [Profile.C172]
    1=Cessna Skyhawk 172SP Paint1
    2=Dynamic_FG 02
     
    [Axes.C172]
    RangeRepeatRate=10
    0=0X,256,D,7,0,0,0
    1=0Y,256,D,8,0,0,0
    2=0R,256,D,47,36,0,0
    3=1X,256,D,45,0,0,0
    4=1Y,256,D,46,0,0,0
    5=2X,256,D,48,0,0,0
    6=2Z,256,D,6,0,0,0
     
    [JoystickCalibration]
    AllowSuppressForPFCquad=Yes
    ExcludeThrottleSet=Yes
    ExcludeMixtureSet=Yes
    ExcludePropPitchSet=Yes
    SepRevsJetsOnly=No
    ApplyHeloTrim=No
    UseAxisControlsForNRZ=No
    FlapsSetControl=0
    FlapDetents=No
    ReverserControl=66292
    Reverser1Control=66422
    Reverser2Control=66425
    Reverser3Control=66428
    Reverser4Control=66431
    MaxThrottleForReverser=256
    AileronTrimControl=66731
    RudderTrimControl=66732
    CowlFlaps1Control=66162
    CowlFlaps2Control=66163
    CowlFlaps3Control=66164
    CowlFlaps4Control=66165
    SteeringTillerControl=0
    MaxSteerSpeed=60
    Aileron=-16383,0,0,16191
    Elevator=-16384,0,0,16383
    Rudder=-16383,0,0,16319
    Throttle=-16380,16380
    Mixture=-16253,16383
    LeftBrake=-16383,16384/16
    RightBrake=-16383,16384/16
    Throttle1=-16380,-11833,-11833,16256/32
    Throttle2=-16384,-11833,-11833,16128/32
    SlewSide=-16383,0,0,16384
    SlewAhead=-16384,608,832,16192
    SlewHeading=-16192,-128,0,16384
    SteeringTiller=-16380,-390,-130,16256/16
    SlopeElevator=4
    SlopeAileron=4
    SlopeRudder=4
    SlopeSteeringTiller=4
    SlopeThrottle=10
    SlopeSlewSide=10
    SlopeSlewAhead=10
    SlopeSlewHeading=10
    SlopeThrottle1=5
    SlopeThrottle2=5
     
    [Profile.B737]
    1=PMDG 737-800NGX European Winglets
    2=Flight One Conquest 441
     
    [Axes.B737]
    RangeRepeatRate=10
    0=0X,256,D,7,0,0,0
    1=0Y,256,D,8,0,0,0
    2=0R,256,D,47,0,0,0
    3=1X,256,D,45,0,0,0
    4=1Y,256,D,46,0,0,0
    5=2X,256,D,9,0,0,0
    6=2Y,256,D,10,0,0,0
    7=2Z,256,D,36,0,0,0
     
     

  6. Can an axis change its function depending on a button state?

    in FSUIPC Support Pete Dowson Modules

    Posted

    Thank you, Pete! Now I'm unable to try it due to lack of computer :) but as soon as I get or build a new one, I will refer to this topic again.

    The FSX steering tiller is certainly listed in the FSX controls list. It is "Steering set". You only had to search for "steering". But f you want to use FSUIPC-added controls, including those which go direct to FSUIPC's calibration tabs, those are listed in the FSUIPC4 Advanced Users Guide, Just search for Additional "FS" Controls, or see the Contents list at the front.

    Pete

  7. Can an axis change its function depending on a button state?

    in FSUIPC Support Pete Dowson Modules

    Posted

    Of course I checked it, but there is no e.g. steering tiller in that. Pete mentioned something like a change (or what's new) document which I was unable to find, and there should be these controls that I am looking for.

    You will already have the complete list on your PC already if you have FSUIPC installed, look in the folder;

    ...Microsoft Games\Microsoft Flight Simulator X\Modules\FSUIPC Documents

    for a file called List of FSX Controls.pdf

  8. Can an axis change its function depending on a button state?

    in FSUIPC Support Pete Dowson Modules

    Posted

    Hi Pete,

    I am unable to check it now, because my computer went out of order. But anyway, can you send me a link with the complete list of those control numbers that can be used with this LuaValue multiaxes solution? Like these three ones:

    64136 steering tiller

    64123 flaps

    64122 spoilers/speed brakes

    In the future I might want to alter the configuration, and I don't want to bother you each and every time :)

    There are only two gear lever positions implemented in FS -- Gear Up and Gear Down, and those are the names of the controls.

    Look again in the FSUIPC Documents subfolder. The list of controls is there as a PDF. It is installed when you install FSUIPC, alongside all of the other documentation PDFs. You are not looking properly if you can't find it!

    Pete

  9. Can an axis change its function depending on a button state?

    in FSUIPC Support Pete Dowson Modules

    Posted

    Hi Pete,

    I'm back again. Now I would like to change the behaviour of the lever. I want to use it as the landing gear lever in one of the three positions. Can you give me the number that I have to enter to the mode selector button configuration? So I would need the Landing gear number instead of the Flaps. I couldn't find that list that you have mentioned earlier, sorry.

    Best regards,

    Tamas

    "

    The controls are listed in a List installed in your FSUIPC Documents folder, in the Modules folder. You can use any control, but obviously only axis controls make much sense. Those are all either named "Axis ..." or end in "set". There are more controls, added by FSUIPC, and listed in the FSUIPC Advanced User's guide. BUT the ones you really want, for the purposes you chose, are currently only published in the "Changes" document included with the recent FSUIPC updates (see Download Links). They are numbered 64101 to 64144, and the ones you want are:

    64136 steering tiller

    64123 flaps

    64122 spoilers/speed brakes

    "

  10. Can an axis change its function depending on a button state?

    in FSUIPC Support Pete Dowson Modules

    Posted

    Thank you, Pete! With your kind help, I managed to make it work.

    Regards,

    Tamas

    You'll only find Lua controls for assignment in the "normal" controls lists. The "direct to calibration" obviously isn't appropriate -- that's the last thing you want -- and the third is writing to offsets, again which you don't want. So it becomes obvious, doesn't it? ;-)

    BTW I confirm there's an oddity assigning LuaValue on the right-hand side. I'm investigating that now. It'll be fixed in the next update, hopefully within a week else Im on holidays.

    Pete

  12. Can an axis change its function depending on a button state?

    in FSUIPC Support Pete Dowson Modules

    Posted

    Oh, that must be the problem. I did not indend to use ranges here. I remembered wrong where to select this Luavalue Multiaxes option. I will try it on the left hand side. Which of the three radio button shall I choose on the left (now I don't have my FSX in front of me, I mean those ones where I can select between sending it to FSUIPC calibration, normal axis and I don't remember the third one :razz: )

    And okay, I will also upgrade to v4.84.

    Regards,

    Tamas

    Why are you using the range settings? Why not assign in the normal manner on the left hand side? Are you using different ranges for different things? I'll have to check but i think the axis value may only be passed as a parameter when assigning as an axis, not a control.

    Please first update to version 4.84 so you are up-to-date and supported. Then try to do it as originally suggested.

    I'll check into the matter of the Luavalue assignment not sticking in the range assignment separately, but I'd like to know what you are using the part for.

    Pete

  13. Can an axis change its function depending on a button state?

    in FSUIPC Support Pete Dowson Modules

    Posted

    Hi Pete,

    I had to reinstall my windows and FSX and now I have trouble getting this multiaxis.lua work. My problem is that even if I try do the Axis Assignment, choosing the lever that is dependent on the mode select switch, Type of action required: Send direct to FSUIPC Calibration, Control sent when range entered: first checkbox selected, and from the dropdown list, I select Luavalue Multiaxes, when I click OK, and then come back to Add-ons / FSUIPC / Axis Assignment, Profile specific checkbox is checked and greyed out, as I can see, on the right under the Control sent when range entered, there is Lua Multiaxes from the dropdown list selected, not the Luavalue Multiaxes. And of course the lever does not work.

    What might be the problem? Can you please help me with this one? It used to work like a charm, and I don't understand, what went wrong now.

    My relevant config now is as follows:

    Win7 x64 ultimate

    FSX Deluxe 10.0.61472.0 (fsx-sp2.20071210-2023)

    FSUIPC 4.8.37 (16th June 2012)

    Part of my FSUIPC4.ini:

    [LuaFiles]

    1=ipcReady

    2=linda

    3=multiaxis

    [Window.LUA display]

    Docked=7423, 3335, 3526, 821

    [Auto]

    1=Lua multiaxis

    ...

    [Profile.PMDG 737 NGX]

    1=Boeing 737-8Q8NGX Malev Hungarian Airlines (oneworld)

    [buttons.PMDG 737 NGX]

    39=P1,8,Cx030066C0,x0000FA7B

    40=P1,9,Cx030066C0,x0000FA7A

    41=P1,10,Cx030066C0,x0000FA88

    ...

    [Axes.PMDG 737 NGX]

    0=0X,256,D,7,0,0,0

    1=0Y,256,D,8,0,0,0

    2=0R,256,D,47,0,0,0

    3=1X,256,D,45,0,0,0

    4=1Y,256,D,46,0,0,0

    5=1Z,256,D,9,0,0,0

    6=1U,256,D,10,0,0,0

    7=1V,256

    8=1V,B,0,0,L3:R,0

    ...

    [JoystickCalibration.PMDG 737 NGX]

    AllowSuppressForPFCquad=Yes

    ExcludeThrottleSet=Yes

    ExcludeMixtureSet=Yes

    ExcludePropPitchSet=Yes

    SepRevsJetsOnly=No

    ApplyHeloTrim=No

    UseAxisControlsForNRZ=No

    FlapsSetControl=0

    FlapDetents=No

    ReverserControl=66292

    Reverser1Control=66422

    Reverser2Control=66425

    Reverser3Control=66428

    Reverser4Control=66431

    MaxThrottleForReverser=256

    AileronTrimControl=66731

    RudderTrimControl=66732

    CowlFlaps1Control=66162

    CowlFlaps2Control=66163

    CowlFlaps3Control=66164

    CowlFlaps4Control=66165

    SteeringTillerControl=0

    MaxSteerSpeed=60

    Aileron=-16383,-416,257,16384

    Elevator=-16287,-1092,864,16383

    Rudder=-16383,-1024,839,16384

    Mixture=-16384,16256

    LeftBrake=-16384,16383/16

    RightBrake=-16383,16383/16

    Spoilers=-16380,16380/16

    Flaps=0,16380

    SteeringTiller=-16384,-1560,1792,16383

    Throttle1=-16384,-512,512,14080/32

    Throttle2=-16384,-512,512,14208/32

    SlopeThrottle1=-5

    SlopeThrottle2=-5

    My FSX folder is:

    G:\FSX

    The multiaxis.lua file is in G:\FSX\Modules folder, and its content is:

    function applyaxis(val)

    cntrl = ipc.readUD(0x66c0)

    ipc.control(cntrl,val)

    end

    event.param("applyaxis")

    Regards,

    Tamas

    Actually, I may not need to. I thought of a very simple way to do this sort of thing, very flexibly. First, make sure your FSUIPC installation is up to date -- latest versions are supplied in the Download Links subforum.

    Then save the following as, say, "multiaxis.lua" in your FS Modules folder:

    function applyaxis(val)
       cntrl = ipc.readUD(0x66c0)
       ipc.control(cntrl,val)
    end

    event.param("applyaxis")
    [/CODE]

    and edit the FSUIPC INI file, adding this section:

    [b][Auto][/b]

    [b]1=Lua multiaxis[/b]

    (if you already have an [Auto] section, add the line with the next available number).

    Now run FS. Go to FSUIPC axis assignments and assign the axis you want to switch as an "FS control", choosing this one from the drop-down list:

    [b]Luavalue multiaxis[/b]

    Then go to the Buttons assignments and assign the buttons you want to use for selecting the axis use, on the right-hand side, as follows:

    [b]Offset dword set,[/b] with [i]Offset[/i][b]x66c0 [/b]and the [i]Parameter[/i] set to the value of the FS or FSUIPC control you want the axis to send.

    The controls are listed in a List installed in your FSUIPC Documents folder, in the Modules folder. You can use any control, but obviously only axis controls make much sense. Those are all either named [b]"Axis ..."[/b] or end in "[b]set[/b]". There are more controls, added by FSUIPC, and listed in the FSUIPC Advanced User's guide. [b]BUT[/b] the ones you really want, for the purposes you chose, are currently only published in the "Changes" document included with the recent FSUIPC updates (see Download Links). They are numbered [b]64101 to 64144,[/b] and the ones you want are:

    [b]64136 steering tiller[/b]

    [b]64123 flaps[/b]

    [b]64122 spoilers/speed brakes[/b]

    Once you've done all this, exit to FS, select a mode using the buttons/switches you assigned above, then go into FSUIPC joystick calibrations and calibrate the axis for that selection. You'll need to exit to change the mode to calibrate each separately -- FSUIPC doesn't obey the button presses when in the options (for pretty obvious reasons).

    Note that this technique is extensible for any number of different uses for the same axis and, by using different offsets (66C4 is the next -- the range 66C0 to 66FF is free for users, giving 16 possible DWORDs to use) and renamed versions of "multiaxis.lua", can be applied to any and all axes.

    I've tested all this with FSUIPC [b]4.754[/b] and FSX. Have fun!

    Regards

    Pete

  15. Can an axis change its function depending on a button state?

    in FSUIPC Support Pete Dowson Modules

    Posted

    Thank you very much. I will test this and tell you how it worked.

    Regards,

    Tamas

    Actually, I may not need to. I thought of a very simple way to do this sort of thing, very flexibly. First, make sure your FSUIPC installation is up to date -- latest versions are supplied in the Download Links subforum.

    Then save the following as, say, "multiaxis.lua" in your FS Modules folder:

    function applyaxis(val)
       cntrl = ipc.readUD(0x66c0)
       ipc.control(cntrl,val)
    end

    event.param("applyaxis")
    [/CODE]

    and edit the FSUIPC INI file, adding this section:

    [b][Auto][/b]

    [b]1=Lua multiaxis[/b]

    (if you already have an [Auto] section, add the line with the next available number).

    Now run FS. Go to FSUIPC axis assignments and assign the axis you want to switch as an "FS control", choosing this one from the drop-down list:

    [b]Luavalue multiaxis[/b]

    Then go to the Buttons assignments and assign the buttons you want to use for selecting the axis use, on the right-hand side, as follows:

    [b]Offset dword set,[/b] with [i]Offset[/i][b]x66c0 [/b]and the [i]Parameter[/i] set to the value of the FS or FSUIPC control you want the axis to send.

    The controls are listed in a List installed in your FSUIPC Documents folder, in the Modules folder. You can use any control, but obviously only axis controls make much sense. Those are all either named [b]"Axis ..."[/b] or end in "[b]set[/b]". There are more controls, added by FSUIPC, and listed in the FSUIPC Advanced User's guide. [b]BUT[/b] the ones you really want, for the purposes you chose, are currently only published in the "Changes" document included with the recent FSUIPC updates (see Download Links). They are numbered [b]64101 to 64144,[/b] and the ones you want are:

    [b]64136 steering tiller[/b]

    [b]64123 flaps[/b]

    [b]64122 spoilers/speed brakes[/b]

    Once you've done all this, exit to FS, select a mode using the buttons/switches you assigned above, then go into FSUIPC joystick calibrations and calibrate the axis for that selection. You'll need to exit to change the mode to calibrate each separately -- FSUIPC doesn't obey the button presses when in the options (for pretty obvious reasons).

    Note that this technique is extensible for any number of different uses for the same axis and, by using different offsets (66C4 is the next -- the range 66C0 to 66FF is free for users, giving 16 possible DWORDs to use) and renamed versions of "multiaxis.lua", can be applied to any and all axes.

    I've tested all this with FSUIPC [b]4.754[/b] and FSX. Have fun!

    Regards

    Pete

  16. Can an axis change its function depending on a button state?

    in FSUIPC Support Pete Dowson Modules

    Posted

    Okay, then it should be easy enough with a plug-in.

    I can help but not till I return.

    Sorry, I don't use and am not involved with Linda, and do not have a copy of the documentation. I think they provide support via a website? I don't realy know if its handles axes, it might only be button programming.

    Regards

    Pete

    Oops, I thought LINDA was also your development. All right Pete, have a nice Christmas holiday and Happy New Year to you.

    Please return to this topic when you are back.

    Regards,

    Tamas

  17. Can an axis change its function depending on a button state?

    in FSUIPC Support Pete Dowson Modules

    Posted

    Is the mode selector visible in FSUIPC's Buttons & Switches assignments tab?

    Yes, it is. It can see the three mode states as Joy#1 button #8, 9 and 10.

    Have you checked whether something like LINDA can help with this? (See sticky thread above).

    Not yet, I am completely new to LUA programming, so it is likely to have questions. Can you help me with some advise on which part of the LINDA doumentation is relevant for my goals?

    Otherwise I can help (assuming the mode selector IS accessible one way or another), but not until I return from Christmas/New Year holiday on January 6th, 2012. I leave this Thursday morning.

    Appreciate it in advance :cool:

    Regards,

    Tamas

  18. Can an axis change its function depending on a button state?

    in FSUIPC Support Pete Dowson Modules

    Posted

    Dear Pete,

    I am flying the PMDG 737NGX with FSX and FSUIPC4. I have a Saitek pro flight yoke system with a throttle quadrant which only has 3 axis levers (like on a Cessna, one black throttle, one blue for propeller pitch, and one red for the mixture control).

    Now I want to use the first two levers for throttle control on the 737 (engine 1, engine 2) and for the third lever I have multiple choices what to use it for. Steering tiller on the ground, or flaps lever, or spoiler axis.

    Actually, it would be great to use it for all of the above. E.g. I have a mode selector switch button on the yoke with 3 positions (working as one of 3 joystick buttons are always pressed), and depending on which button is pressed, the third lever could have the different functionality.

    Is that possible to do this with FSUIPC? Or is there any chance that a newer version will make this possible?

    Regards,

    Tamas

  20. PMDG 737NG overhead panel controls

    in FSUIPC Support Pete Dowson Modules

    Posted

    Have you never used the keyboard with FS?

    Only brakes, parking brakes and gear up/down :) for the others I used mouse.

    Most more sophisticated setups would use an axis assignment for spoilers in any case

    That's a good idea. Now I use my 3rd throtle lever as a steering tiller, but it would be nice to use it for spoilers / spoilers arm when in the air. I read that offsets can be used for this, different offset means I am on the ground or in the air, but can you please tell me exactly how to do this? This part of joystick calibration and axis assignment now looks like this:

    SteeringTiller=-16351,-3559,-1892,16255/16

    4=0U,256,D,36,0,0,0

    Tamas

  21. PMDG 737NG overhead panel controls

    in FSUIPC Support Pete Dowson Modules

    Posted

    I tested spoilers arm in the air. If you say that these are the controls that should work, then maybe I need to create and check my log file. Now, because of my plans to use approx 8-9 buttons to toggle controls and use 6 buttons for different "modes" I have very complex setup like these (and even more complex ones)

    61=CP(+0,25)(F-10,0)(F-10,1)(F+10,2)(F-10,3)(-0,20)(+0,21)(-0,22)0,12,C66066,0 ; SPOILERS_ARM_ON 66066

    62=CP(+0,25)(F-10,0)(F-10,1)(F+10,2)(F-10,3)(-0,20)(+0,21)(-0,22)0,10,C66067,0 ; SPOILERS_ARM_OFF 66067

    63=CP(+0,25)(F-10,0)(F-10,1)(F+10,2)(F-10,3)(+0,20)(-0,21)(-0,22)0,12,C66068,0 ; SPOILERS_ARM_SET 66068

    64=CP(+0,25)(F-10,0)(F-10,1)(F+10,2)(F-10,3)(+0,20)(-0,21)(-0,22)0,10,C65853,0 ; SPOILERS_ARM_TOGGLE 65853

    So I might have to test it on a completely "safe" button, like which I don't use with combinations, and I use it in the general section. The more complex the setup becomes, the more difficult to debug. Now 99% of the functions are working (I left some to use by mouse because I really run out of buttons :)), there are just these few issues. The others I want to debug myself first, and only if I'm completely lost, I will ask for your help.

    Regards,

    Tamas

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use. Guidelines Privacy Policy We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.